CS Paper Radar

PhyDEX: A Benchmark for Physical Reasoning in Vision-Language-Action Models via Dynamic Extrinsic Dexterity

Hao Vo, Taisei Hanyu, Yuki Ikebe, Pham Tri Quang, Sreevenkata Anjani Tishita Godavarthi, Nghi D. Q. Bui, Daniel Sonntag, Chase Rainwater, Duy Minh Ho Nguyen, Anh Nguyen, Ngan Le

cs.RO ·submitted 2026-11-19 18:33 UTC · v1
benchmark

Abstract

Vision-Language-Action (VLA) models have advanced rapidly in language-conditioned robotic manipulation, yet existing benchmarks mainly evaluate gripper--object contact and largely ignore how objects interact with the environment through gravity, friction, inertia, and mass distribution. As a result, it remains unclear whether current policies truly understand physics or merely interpolate from their training data. We address this gap through the lens of dynamic extrinsic dexterity and introduce PhyDEX, a throwing benchmark in which a robot must infer an object's mass, center of mass, and friction to send it to a destination beyond its kinematic workspace. PhyDEX contains 35K trajectories (143 hours) across nine tasks and 100 scenes, covering uniform, irregular, and dynamic-mass objects with static, multiple, and moving destinations. All data are generated by a scalable, fully automatic pipeline that combines grasp generation, motion planning, and closed-loop throw optimization under randomized physical properties. We evaluate three representative VLAs, GR00T N1.7, DynamicVLA, and ForceVLA, and find that all achieve success rates below 3\%. Our analysis reveals two key bottlenecks: limited robustness of pretrained models, which causes most failures before the throw, and physical blindness, as providing ground-truth physical properties roughly doubles success. Experiments on a humanoid robot and in the real world show the same failure patterns. We hope PhyDEX will drive the development of physically grounded robot policies.

Closest papers

Nearest neighbours by meaning across the whole index.

LIBERO-Dynamic: Benchmarking Robotic Manipulation in Dynamic Environments

cs.RO ·2026-10-17 ·Shaojie Ren, Jingwen Sun, Zezhi Liu, Hongjin Chen, Xin Jin +2 more
highly cited similarity 0.75
Abstract · 22 pages, 14 figures

Most simulation benchmarks for robotic manipulation keep target objects static and treat policy inference as instantaneous. These assumptions simplify evaluation but hide how a moving target evolves during computation and how stale an observation is when an action is executed. We introduce LIBERO-Dynamic, a dynamic extension of all 40 LIBERO tasks. It drives objects through contact friction along three trajectory families and speed tiers, while advancing the physical world according to calibrated, model-specific inference latency. The same mechanism supports training by replaying verified static demonstrations and compensating robot actions online for target displacement, producing 9,000 quality-filtered dynamic trajectories. We evaluate six pretrained policies on 1,800 dynamic conditions per configuration, compare execution strategies and action horizons with fixed checkpoints, and fine-tune three architectures using dynamic and mixed data. Faster motion degrades every policy but not uniformly; execution timing and horizon can change the behavior of the same policy; and asynchronous replanning benefits from frequent feedback only when the action queue avoids underflow. Dynamic demonstrations improve each architecture under at least one recipe, with gains varying by temporal conditioning, data composition, and training budget. A small-scale physical study shows task-dependent execution-strategy differences consistent with simulation. LIBERO-Dynamic makes object motion, inference latency, and action execution explicit and controllable for evaluating and improving robot policies in moving-target manipulation.

0.40

RoboTwin-Phys: Do WAMs and VLAs Understand the Physical World?

cs.RO ·2026-09-22 ·Jiaqi Zhang, Feng Ye, Mingjia Yang, Zhihong Chen, Mingkang Xiang +4 more
benchmark similarity 0.75
Abstract · technical report for a benchmark

Physical-condition diversity is largely missing from current benchmarks for robot manipulation. While large-scale simulation benchmarks increasingly incorporate variations in object appearance, scene layout, and visual observations, they typically keep the underlying physical parameters fixed. As a result, important sources of real-world variability, such as changes in mass, friction, and joint dynamics, remain largely untested. We introduce RoboTwin-Phys, a physics-diverse benchmark that treats physical-condition diversity as an explicit dimension of robot manipulation evaluation. The benchmark continuously varies 13 physical attributes within physically plausible ranges, providing a unified setting for evaluating policies across diverse physical operating conditions. We further release more than 5,000 expert demonstrations with ground-truth physical parameters, enabling physical-attribute estimation, condition-aware modeling, and physics-conditioned policy training. Evaluations of representative WAMs and VLAs reveal a substantial robustness gap: models that remain effective under existing visual and layout randomization can degrade markedly under changes in physical conditions. RoboTwin-Phys provides the benchmark, data, and evaluation protocol needed to systematically measure and improve robustness to physical-condition diversity in robot manipulation.

0.23

DualManip: Agentic Dynamic Manipulation via Dual-Path Semantic Reasoning and Geometric Adaptation

cs.RO ·2026-09-25 ·Chengxi Li, Yan Di, Yingyue Li, Ruida Zhang, Mingyang Li +1 more
code/data similarity 0.74
Abstract

Vision-language models (VLMs) enable open-vocabulary reasoning for robot manipulation, but their high inference latency limits responsiveness in dynamic scenes. Many scene changes, however, alter object geometry without invalidating task intent. We present DualManip, a dual-path framework that decouples infrequent semantic reasoning from responsive geometric adaptation. The semantic path decomposes the task and grounds task-relevant interactions, followed by a constraint-solving module for pose optimization. During execution, the geometric path continuously updates template-to-observation correspondences from live RGB-D observations via a shape-adaptive network. These correspondences transfer task-relevant grasp contacts across observations, enabling online grasp reconstruction under object motion and non-rigid deformation. The Information Interaction Module bridges the two paths by initializing task-relevant grasps from semantic grounding, validating geometric updates, and triggering semantic replanning upon update failures. Real-world evaluation spans six manipulation tasks covering non-rigid deformation, articulated reconfiguration, rigid motion, and high-precision assembly across three settings: static, single-change, and continuous dynamic. DualManip demonstrates superior manipulation robustness, particularly under continuous scene changes, while achieving geometric adaptation approximately 46$\times$ faster than agentic verification and semantic replanning. Our project page: https://lichengxi1.github.io/Dualmanip.

0.27

CodeActionBench: Evaluating Agentic Code-as-Policy for Embodied Manipulation

cs.RO cs.AI ·2026-09-27 ·Yiheng Lyu, Xueying Jiang, Wenhao Li, Shijian Lu, Gongjie Zhang
benchmark similarity 0.74
Abstract · 28 pages including references and appendices, 10 figures. Project website: https://codeactionbench.org

How well can general-purpose multimodal models turn visual understanding and reasoning into embodied manipulation via executable code? We introduce CodeActionBench, a benchmark of 25 manipulation tasks that evaluates this capability through agentic Code-as-Policy. Without task-specific fine-tuning, demonstrations, external specialist perception or grasp modules, privileged scene state, or predefined task policies, agents should select visual evidence, form task-relevant 3D estimates, construct manipulation targets, and iteratively execute and revise their policies. A shared robot API provides RGB observations, calibrated geometric operations, robot feedback, and bounded motion, leaving task-dependent decisions to the evaluated agent. Fixed task instances, resource budgets, and a hidden physical-outcome verifier support controlled comparisons across models and harness configurations. Extensive evaluations across nine configurations and 675 attempts achieve success rates ranging from 2.7% to 73.3%. The strongest configuration, GPT-6 Astra with Codex CLI, solves 22 of 25 tasks at least once in three attempts, demonstrating the best performance while still leaving substantial room for improvement. Trajectory analyses reveal difficulties in spatial alignment, object retention, and completion judgment, including task failures despite successfully completed motions. CodeActionBench provides a controlled testbed for measuring how general-purpose models translate their capabilities into manipulation behavior and for examining typical failure scenarios in that process.

0.53

PhysCaP: Grounding Code-as-Policy Agent with Physics-Informed Exploration

cs.RO ·2026-08-21 ·Chen-Yu Lin, Jing-Wen Chen, Hsueh-En Chang, Hung-An Chen, Sheng-Hsun Chang +6 more
code/data similarity 0.74
Abstract

We present PhysCaP, a Physics-Informed Code-as-Policy agent system for active perception in robotic manipulation. While vision-language-action policies excel at imitating demonstrations, they rely on passive observation and fail to infer latent physical properties critical for manipulation. PhysCaP augments code-as-policy frameworks with a physics-informed exploration layer that enables explicit information-seeking through interaction. Our method introduces training-free physical property extraction modules that estimate object mass and stiffness from robot proprioception without additional sensors. To balance exploration costs and the efficiency of information obtained, PhysCaP employs a multi-agent design: a Planner that decides when to explore and when to stop, and a Prioritizer that filters implausible interactions and ranks the remainder using a heuristic priority score, enabling efficient, targeted exploration. We evaluate PhysCaP on three real-world tabletop manipulation tasks and a simulated task in LIBERO. The results show that existing passive and naive interactive baselines either fail when physical properties are hidden or over-explore, whereas PhysCaP achieves comparable performance with fewer interactions and reduced execution time. Ablation studies further validate the effectiveness of the proposed physical property extraction modules. Project page: https://physcap.github.io

0.53

2AM: Grounding Agent-Side Memory as Guidance for Steerable Action Models in Long-Horizon Manipulation

cs.RO cs.AI ·2026-09-10 ·Yutong Hu, Fengjiao Chen, Xuezhi Cao, Renaud Detry
similarity 0.74
Abstract

Long-horizon robot manipulation requires memory, but not necessarily inside the action policy. To address such tasks, current agentic systems often combine VLAs with planners and geometric tools, sometimes using additional depth or calibrated geometry. These systems confound attribution: gains may come from richer observations or alternative motor tools, while failures may stem from either the policy or an under-specified language interface. We isolate this question through a deliberately constrained design: less tool breadth, but greater interface bandwidth. 2AM makes a multimodal Agent the sole holder of task memory and a single RGB-based, episodically stateless Action Model the sole executor of task-relevant motion. The Agent compiles interaction history into subtask language and optional 2D grasp, place, and move hints that bind its physical intention at different time scales. To teach this steerability to the VLA, we augment demonstrations with structured hint labels and train under condition dropout, spatial noise, and temporal jitter to tolerate imperfect Agent outputs. On LIBERO-Mem, without depth, online geometry, or planner-based object motion, 2AM reaches 76.3% average completion, a 61.5-point improvement over the strongest reported baseline of 14.8%, together with 63.0% relaxed and 11.8% strict success. These results show that task memory can remain Agent-side. They further show that Action Model capability depends not only on what the policy has learned, but on how precisely the Agent can steer it. Project website: agent-mem-action-model.github.io

0.39

Agent as Policy for Robotic Manipulation

cs.CL ·2026-09-11 ·Mengzhao Jia, Yang Lin, Xixin Zhang, Zhihan Zhang, Xiaobai Liu +1 more
highly cited similarity 0.73
Abstract

We demonstrate that a general-purpose agent can directly drive a physical robot throughout task execution without any task-specific or environment-specific training. We introduce Agent as Policy (AGP), which places task planning and execution under the agent's control. Given a task and a robot interface, the agent interprets visual evidence, writes executable programs, issues motion commands, and revises its actions in response to physical outcomes. This brings the agent's reasoning and programming capabilities into continuous interaction with the physical world. We study AGP across multiple real-world manipulation tasks spanning precision manipulation, dynamic motions, and deformable objects. These include assembly from human videos, block construction from goal images, dice flipping, targeted throwing, and bimanual towel folding. AGP achieves success rates of at least 80% in seven of eight task configurations and significantly outperforms previous agentic robot systems. We further study efficiency through task experience accumulation and find that reusing saved procedures and programs shortens execution time across repeated trials. These findings support a path for general-purpose agents to act as robot policies, extending their autonomy to physical manipulation through runtime reasoning, programming, and interaction.

0.42

RoboWorM: Evaluating Movement Realism, Consistency and Acceleration Affects in Embodied Video World Models

cs.RO ·2026-10-24 ·Doanh Le Thien, Viet-Thanh Nguyen, Pham Tri Quang, Nhi Pham, Christopher Wewer +16 more
benchmark similarity 0.73
Abstract · First version, 52 pages

Video world models (VWMs) are rapidly emerging as scalable neural simulators for robotic manipulation. However, most benchmarks only evaluate them as open-world video generators, using Vision-Language Models (VLMs) that lack strict 3D spatial and kinematic reasoning. To bridge this gap, we introduce RoboWorM, a comprehensive, deployment-aware benchmark that leverages known hardware priors such as robot kinematic trees and fixed camera configurations, to systematically examine structural and spatiotemporal fidelity. RoboWorM curates 1,605 episodes across single-arm, bimanual, and humanoid morphologies, spanning both Markovian and long-horizon non-Markovian tasks under single- and multi-view setups. To explicitly measure physical consistency, we propose two deterministic, VLM-free metrics: KIVA for intra-view kinematic stability, and RIGIS for multi-view geometric consistency. By exploiting intrinsic robotic invariants, KIVA improves hallucination detection alignment with human annotations by 25.8% relative to the strongest frontier VLMs, while RIGIS achieves a 130% higher Spearman correlation with human preferences. Furthermore, since real-world deployment requires low inference latency, we utilize RoboWorM to conduct the first large-scale audit of the quality-efficiency trade-off. Evaluating 9 state-of-the-art acceleration techniques across 3 leading world models (over 29,000 generated rollouts), we demonstrate how these acceleration methods can retain superficial visual quality while silently compromising deployment-critical physical constraints. Using our metrics, we achieve 2.3$\times$ maximum inference speed-up with minimal quality loss.

0.21