CS Paper Radar

Tensor Network Simulation of Dynamic Circuits

Innocenzo Fulginiti, Alessandro Poggiali, Christian B. Mendl

cs.ET quant-ph ·submitted 2026-09-22 14:42 UTC · v2
publishedbenchmark

Abstract

Dynamic circuits, which incorporate mid-circuit measurements and classically controlled operations, extend the expressive power of quantum programs and are central to applications such as quantum error correction, state preparation, and distributed quantum algorithms. However, their classical simulation is challenging due to the exponential growth of execution branches induced by mid-circuit measurements. In this work, we develop a tensor network approach for simulating dynamic circuits by extending a DMRG-based method for quantum circuit simulation to support dynamic circuit operations. To address the exponential proliferation of execution branches, we introduce and compare two strategies: a single-path stochastic approach that samples individual measurement outcomes, and a multi-path approach that maintains an ensemble of branches. We benchmark these methods on standard dynamic circuits, including the teleportation protocol and GHZ state preparation, as well as on random dynamic circuits. Our analysis explores the trade-offs between simulation accuracy and computational efficiency. These results provide a practical and scalable framework for the classical simulation of dynamic circuits.

Comment
Accepted at CASCON 2026 conference

Closest papers

Nearest neighbours by meaning across the whole index.

ArcTN: Efficient Tensor-Network Contraction Planning for Quantum Circuit Simulation

cs.MS quant-ph ·2026-10-22 ·Zhengyi Liu, Li Liu, Songtao Liu, Xianglong Liu, Xiangzhen Zhou +5 more
code/data similarity 0.68
Abstract · 29 pages, 4 figures, 15 tables. Code and benchmarks: https://github.com/Quill-ArcLight/ArcTN. v2: equal-contribution and corresponding-autho…

Tensor-network simulation of quantum circuits depends on contraction orders with low computational cost and small intermediate tensors, found without excessive planning time. We present ArcTN, a contraction-order optimization framework with two search presets. Light keeps planning overhead low, and Heavy spends more effort on refinement. Both combine randomized-greedy construction, subtree reconfiguration, and parallel tempering with stage-specific stopping rules. ArcTN also provides Fixed and Dynamic slicing to meet tensor-size limits and executes the returned orders. On the 30 QC32 quantum-circuit networks completed by all eight compared configurations, Light reduces FLOPs by 61.32% and plans 1.62$\times$ faster than Cotengra Auto/CMA-ES, and Heavy reduces FLOPs by 43.83% and plans 7.21$\times$ faster than Cotengra AutoHQ/Optuna. Heavy also needs 11.85% fewer FLOPs than OMECO TreeSA-8 and plans 1.33$\times$ faster. Dynamic slicing meets the size limits in all 90 runs on 18 scalar-output networks and reduces total sliced FLOPs by 31.99% relative to Fixed slicing, at the cost of longer planning. With a common NumPy executor, Heavy has the lowest combined planning and execution time among five configurations on the runs that all of them completed. On 672 networks built from 320 MQT Bench circuits, Heavy obtains the lowest geometric-mean FLOPs on the 142 large networks while planning 3.1$\times$ and 31$\times$ faster than Cotengra AutoHQ and Hyper128.

0.31

Simulation-Based Quantum System Inference with Neural Posterior Estimation

cs.LG quant-ph ·2026-09-28 ·Hang Zou, Anton Frisk Kockum, Martin Rahm, Simon Olsson
similarity 0.66
Abstract · 24 pages; 15 figures

Models of quantum systems faithfully map system parameters to observations, but the inverse problem of parameter inference from measurement data presents a fundamental challenge: computationally intractable likelihoods due to an exponentially large Hilbert space. Here, we introduce simulation-based quantum system inference, a unified, likelihood-free framework that learns parameter posteriors directly from classical simulation data. The central idea is to pair polynomial-cost classical simulators, such as Pauli propagation and tensor networks, with normalizing flows or other neural density estimators for accurate, reusable inference. A single model, trained once, maps any new measurement record to its posterior in one forward pass---turning per-experiment inference into a fixed, up-front cost. We numerically demonstrate the framework's versatility across Pauli noise learning, quantum error mitigation, quantum state tomography, and Hamiltonian learning, with examples involving 81-qubit shallow circuits and 735-parameter inference. In each case, the approach yields accurate estimates of identifiable parameters, while posterior uncertainty provides additional diagnostics of non-identifiability and indicates where further characterization is needed. Our framework reduces data-acquisition requirements in quantum experiments and accelerates parameter inference, providing a practical route to characterizing and improving large-scale quantum systems.

0.15

Scalable quantum simulation of continuous-time generative models via tensor networks

cs.AI quant-phcs.LG ·2026-08-22 ·Nathan X. Kodama, L. Andrew Wray, Sam Cochran, Chad Rigetti, Shravan Veerapaneni +1 more
similarity 0.66
Abstract

Continuous-time flow and diffusion models are widely used across many application domains, from large-scale deployment in computer vision and protein folding to emerging adoption for modeling language, time series, and quantum states. After training, inferring statistical properties from continuous-time models is costly. Wavefunction flows target this cost by recasting learned transport as unitary evolution, whose final Born distribution approximates the target distribution. This prepares a coherent amplitude encoding (a qsample) that can be post-processed by quantum algorithms offering a quadratic advantage over Monte Carlo sampling. We present the first numerical study of these flows, in which we represent time-dependent potentials and states as tensor networks. At spatial dimension $d=8$, storage falls by $\sim 10^7\times$ relative to the dense grid of $N^d$ points, and evolution wall-clock time falls by $\gtrsim 10^3\times$ against a baseline extrapolated from the measured $d\le 5$ scaling. We validate our pipeline by reproducing the $O(1/\sqrt{p_{\rm rare}})$ scaling of rare-event sampling.

0.26

ABSTRACTS: Amsterdam Benchmark Suite for the Time and Resource Analysis of Clifford+T Simulators

cs.PF quant-ph ·2026-08-25 ·Matthew Sutcliffe, John van de Wetering
benchmarkcode/data similarity 0.65
Abstract · This manuscript corresponds to version 0.1 of the ABSTRACTS repository: https://github.com/mjsutcliffe99/ABSTRACTS

Recent years have seen a rapid growth in literature presenting new methods for simulating non-Clifford quantum circuits with classical hardware. These methods span a range of approaches, including stabiliser decomposition and tensor contraction techniques, varying in efficiency depending on circuit class, depth, non-Clifford gate count, and other metrics. A notable limitation of this literature is the lack of a standardised approach to benchmarking, with each new paper outlining its own specification, simulating its own set of circuits on the authors' own hardware. This paper seeks to address this issue by presenting a standardised and canonical benchmark suite and infrastructure for quantifying the efficiency of non-Clifford classical simulators, with a consistent dataset of circuits and providing consistent (virtual) hardware, thereby enabling a fair comparison of results.

0.35

Quantum Tensor Network Learning with DMRG

cs.LG quant-ph ·2026-08-19 ·Gustav J L Jäger, Martin B Plenio, Hans-Martin Rieser
published similarity 0.63
Abstract · 6 pages, 2 figures, 1 table, ESANN conference

Tensor Networks are a relatively new machine learning approach. The architectures proposed initially are inspired by approaches from quantum many-body physics simulations. One common layout is the matrix product state (MPS) also known as a tensor train optimized with gradient descent techniques. We introduce a global normalization condition, so that the MPS represents a quantum state. We investigate two optimization methods that find the locally optimal tensors and compare them regarding their effectiveness. One is based on gradient descent and the other on an adaptation of DMRG.

0.62

SeQUeNCe.DQC: Full-stack Simulation of Distributed Quantum Computing

cs.NI cs.DCquant-ph ·2026-10-29 ·Sanjay Suresh, Caitao Zhan, Joaquin Chung, Rajkumar Kettimuthu
benchmark similarity 0.63
Abstract · 6 pages, 6 pages

Distributed quantum computing (DQC) connects multiple quantum processing units to overcome the scale limits of monolithic hardware. We introduce SeQUeNCe$.$DQC a new top-level module within the SeQUeNCe package that compiles monolithic circuits into topology-aware execution plans and coordinates their execution using SeQUeNCe's existing quantum-network modules and protocols. We validate SeQUeNCe$.$DQC by reproducing a two-node trapped-ion Grover experiment in simulation and comparing success probabilities with the reported 71% benchmark. We then evaluate how compiler strategy, topology, and memory capacity jointly govern distributed circuit execution time and success rate. In these experiments, our hybrid compilers successfully identified mixed TeleGate/TeleData execution plans that outperformed pure gate-teleportation strategies. By capturing the physical overhead of distributed quantum primitives, SeQUeNCe$.$DQC provides a rigorous platform for co-designing DQC software and hardware architectures.

0.07

Normalizing Flows for Classical Simulation of Quantum Circuits in Phase Space

cs.LG quant-ph ·2026-11-10 ·Edward Jiang, Timothy Heightman, Marcin Płodzień
similarity 0.63
Abstract · 9 pages, 3 figures

We present a novel framework to learn a representation of quantum circuits based on the phase space formulation of many-body systems. Given that $N$-qubit states can be represented as probability distributions on a smooth $2N$-dimensional manifold, we show how unitary gates can be parameterized as normalizing flows between these distributions, opening a new avenue for quantum circuit simulation using generative models. We evaluate our method on three common families of quantum circuits, and show that its accuracy exceeds that of current state-of-the-art neural network methods for large system sizes.

0.20

Distributing Quantum Circuits Using Pre-Distributed Entanglement Pairs over Quantum Networks

cs.ET quant-ph ·2026-10-19 ·Yukun Yang, Ranjani G. Sundaram, Himanshu Gupta
publishedbenchmark similarity 0.62
Abstract · 9 pages, 4 figures. Full author version revised after acceptance; includes the cost-aware entanglement consumption section omitted from the …

Distributing quantum circuits across a network of quantum devices is a recent approach to improve the scalability of quantum computation. Entangled pairs of qubits distributed across network nodes are used as a communication resource for executing inter-node (remote) gates. However, establishing these entanglement pairs incurs significant latency, and doing so during the circuit's execution may lead to the decoherence of logical qubits. Instead, it may be beneficial to distribute certain entanglement pairs before the circuit is executed. Thus, we consider the problem of distributing a quantum circuit across a quantum network containing some pre-distributed entanglement pairs and seek to minimize the execution time of the circuit. We address this problem in three steps. First, given the quantum network and (optionally) a probability distribution over training circuits, we determine a set of pre-distributed entanglement pairs under a specified budget. Second, we compute a qubit-to-memory allocation that minimizes the expected execution time given these pre-distributed resources. Finally, we identify any additional entanglement pairs required during execution, generate them concurrently, and execute the circuit gates. We evaluate our methods on a broad range of benchmark circuits.

0.46