CS Paper Radar

ArcTN: Efficient Tensor-Network Contraction Planning for Quantum Circuit Simulation

Zhengyi Liu, Li Liu, Songtao Liu, Xianglong Liu, Xiangzhen Zhou, Mingyu Huang, Dingchao Gao, Shenggang Ying, Bolong Chen, Ji Guan

cs.MS quant-ph ·submitted 2026-10-22 16:58 UTC · v2
code/data

Abstract

Tensor-network simulation of quantum circuits depends on contraction orders with low computational cost and small intermediate tensors, found without excessive planning time. We present ArcTN, a contraction-order optimization framework with two search presets. Light keeps planning overhead low, and Heavy spends more effort on refinement. Both combine randomized-greedy construction, subtree reconfiguration, and parallel tempering with stage-specific stopping rules. ArcTN also provides Fixed and Dynamic slicing to meet tensor-size limits and executes the returned orders. On the 30 QC32 quantum-circuit networks completed by all eight compared configurations, Light reduces FLOPs by 61.32% and plans 1.62$\times$ faster than Cotengra Auto/CMA-ES, and Heavy reduces FLOPs by 43.83% and plans 7.21$\times$ faster than Cotengra AutoHQ/Optuna. Heavy also needs 11.85% fewer FLOPs than OMECO TreeSA-8 and plans 1.33$\times$ faster. Dynamic slicing meets the size limits in all 90 runs on 18 scalar-output networks and reduces total sliced FLOPs by 31.99% relative to Fixed slicing, at the cost of longer planning. With a common NumPy executor, Heavy has the lowest combined planning and execution time among five configurations on the runs that all of them completed. On 672 networks built from 320 MQT Bench circuits, Heavy obtains the lowest geometric-mean FLOPs on the 142 large networks while planning 3.1$\times$ and 31$\times$ faster than Cotengra AutoHQ and Hyper128.

Comment
29 pages, 4 figures, 15 tables. Code and benchmarks: https://github.com/Quill-ArcLight/ArcTN. v2: equal-contribution and corresponding-author notes added, author order updated, Figures 1 and 2 revised

Closest papers

Nearest neighbours by meaning across the whole index.

Tensor Network Simulation of Dynamic Circuits

cs.ET quant-ph ·2026-09-22 ·Innocenzo Fulginiti, Alessandro Poggiali, Christian B. Mendl
publishedbenchmark similarity 0.68
Abstract · Accepted at CASCON 2026 conference

Dynamic circuits, which incorporate mid-circuit measurements and classically controlled operations, extend the expressive power of quantum programs and are central to applications such as quantum error correction, state preparation, and distributed quantum algorithms. However, their classical simulation is challenging due to the exponential growth of execution branches induced by mid-circuit measurements. In this work, we develop a tensor network approach for simulating dynamic circuits by extending a DMRG-based method for quantum circuit simulation to support dynamic circuit operations. To address the exponential proliferation of execution branches, we introduce and compare two strategies: a single-path stochastic approach that samples individual measurement outcomes, and a multi-path approach that maintains an ensemble of branches. We benchmark these methods on standard dynamic circuits, including the teleportation protocol and GHZ state preparation, as well as on random dynamic circuits. Our analysis explores the trade-offs between simulation accuracy and computational efficiency. These results provide a practical and scalable framework for the classical simulation of dynamic circuits.

0.35

Enabling Dynamic Resource Scaling in Quantum Circuit Simulations

cs.DC ·2026-10-29 ·Íñigo Aréjula-Aísa, Sergio Iserte, Petter Sandås, Ricard S. Raigada-García, Oliver Brown +2 more
similarity 0.64
Abstract

Studies of quantum algorithms often simulate se- quences of circuits whose number of qubits changes from one circuit to the next, such as instances of increasing size of the same problem. Since each additional qubit doubles the state- vector, every circuit needs a different number of nodes, which a fixed allocation on a shared High-Performance Computing (HPC) system cannot provide: a job sized for the largest circuit leaves most of its nodes idle, and one job per circuit adds scheduler interactions and queue waits. We make the QuEST state-vector simulator malleable with the Dynamic Management of Resources (DMR) framework, so that a single job resizes between circuits. Because no state-vector exists between circuits, reconfigurations require no data redistribution and no changes to the simulation kernels, and a checkpoint holding the index of the next circuit is enough to resume. A right-sizing policy derives the number of nodes from the number of qubits, and the circuit_executor API hides reconfigurations from the user. We evaluate the reconfiguration overhead on MareNostrum 5 and show that a single job can run a batch of circuits of different sizes, adapting its allocation to each of them with negligible overhead.

0.05

Plateau-Constrained Selection: Exploiting Degeneracy for Lower-Depth Quantum Compilation

cs.ET quant-ph ·2026-08-27 ·Owen Friedewald, Ali Shiri Sichani, Chi-Ren Shyu
theory similarity 0.64
Abstract · 11 pages, 4 figures. Under review at IEEE Transactions on Quantum Engineering

Minimum-cost orders of commuting phase terms can produce substantially different routed circuits. On the same 36-term instances, three orders with identical support cost 74 yield mean routed depths of 228.6, 233.8, and 256.7. We exploit this degeneracy under fixed placement and maintained-parity lowering: Stage 1 attains the support optimum, and Stage 2 selects minimum routed depth among 24 equal-cost orders. For distinct pair supports, we characterize orders attaining the support lower bound through Hamiltonian paths of the support line graph and count optima exactly through 20 terms. On synthetic 16-qubit assignment-Ising instances, selection reduces depth by 12.83% under a different SABRE routing seed, with lower depth in all 20 instances. The selected orders lie a median 1.57 pool standard deviations below the pool mean, consistent with ordinary best-of-24 selection; the useful feature is that candidate rankings persist across routing seeds. Depth reductions extend to 48 terms and a random-MaxCut generator, whereas evaluation with BasicSwap reverses the gain. A 40-instance IBM Heron study measures a 0.59% error reduction on the executed stabilizer-probe panel, but the primary confidence interval across instances includes zero. Plateau selection therefore improves routed depth in the tested SABRE pipeline while preserving the logical support optimum.

0.49

Turning Quantum Compiler Configuration Selection Upside Down: A Top-Down Paradigm

cs.SE quant-ph ·2026-10-21 ·Ming Zhong, Xiangyu Ren, Kangyu Zheng, Zhi Zeng, Shenggen Zheng +2 more
benchmark similarity 0.63
Abstract · 16 pages, 9 figures, 9 tables

Selecting an effective quantum compiler configuration requires coordinated decisions over both hardware targets and compiler settings, with the ultimate goal of improving circuit execution fidelity. Existing SOTA approaches typically decompose this problem into two sequential stages: a device is chosen first, after which compiler options are tuned on that device through RL-based search. This bottom-up strategy can be fundamentally limited by its initial device decision, since a poorly matched backend may constrain the best fidelity achievable regardless of how effectively later compiler options are optimized. In contrast to classical compiler tuning, where the search space is often prohibitively large, the configuration space of quantum compilers remains manageable enough to support exhaustive search. Consequently, rather than repeatedly searching from candidate configurations, one can derive reusable configuration knowledge from offline oracle results and apply it directly to new circuits. In this paper, we introduce a top-down configuration-selection paradigm and build QuOPTBench, an exhaustively searched benchmark containing oracle configurations for 268 quantum circuits. We first study whether LLMs can directly infer suitable configurations and evaluate ten representative LLMs. The results reveal that vanilla LLMs remain far from the oracle. We then employ an LLM to extract transferable rules from sampled circuits governing configuration selection. Using these rules together with predictors trained on the enumerated configuration data of the sampled circuits, we design QuTOP, a rule-guided ML framework that performs fast configuration selection without iterative online search. Across our evaluation, the distilled rules consistently strengthen LLM-based selection, while QuTOP provides the strongest overall balance between solution quality and selection latency among the baselines.

0.10

ConQUESTA: Topology-Aware Post-Training Structural Pruning of Quantum Neural Networks

cs.AR quant-pheess.SY ·2026-10-16 ·Saim Rehman, Muhammad Shafique
similarity 0.63
Abstract · Submitted to IEEE ISCAS 2027 for Review

Deploying quantum neural networks (QNNs) on sparse hardware requires preserving task accuracy while reducing compiler-induced two-qubit gates, SWAPs, and depth. We present ConQUESTA (\underline{C}onstrained \underline{Qu}antum \underline{E}ntangler \underline{S}election with \underline{T}opology \underline{A}wareness), a post training pruning framework that combines task saliency with compiler cost, screens candidate entanglers, and searches complete pruning masks under an explicit accuracy constraint. Unlike one-shot ranking, each mask is transpiled as a whole across multiple coupling topologies. Across 4-, 6-, and 8-qubit QNNs and eight model seeds at 55% pruning, ConQUESTA achieves mean resource reductions of 61.6% on Breast Cancer, 72.0% on Digits01, and 82.2% on Iris, exceeding the strongest matched simple baseline by 3.5, 1.7, and 8.9 percentage points, respectively. Fixed-mask recovery raises feasibility from 16/24 to 22/24 runs. In a fixed-k=4 scaling study on a scaling probe of 4 to 12-qubits, the raw mask space grew from 495 to 12.1M while the evaluated masks increase only from 189 to 305. Resource-weight changes alter depth/routing priorities with at most a 0.44-point mean validation shift.

0.24

Evaluating the Effect of the Order of Optimization Passes in Quantum Circuit Optimization

cs.ET quant-phcs.PF ·2026-09-24 ·Xiao-Ting Michelle To, Nils Quetschlich, Amr Elsharkawy, Martin Schulz, Robert Wille +1 more
publishedbenchmark similarity 0.63
Abstract · Accepted for publication at IEEE International Conference on Quantum Computing and Engineering 2026

Quantum circuit optimization is critical for mitigating the noise inherent in current quantum hardware. Quantum compilers typically sequentially apply multiple optimizations (also called ``optimization passes'') to improve the circuit. The impact of the order in which these passes are executed has yet been largely unexplored. This paper investigates the significance of the order of optimization passes within quantum circuit compilation, specifically analyzing interactions between different optimization methods and quantifying their mutual influences. Using Qiskit's compiler, we systematically evaluate pairwise combinations of 16 selected optimization passes, measuring circuit depth and gate count across various benchmark circuits. Our findings indicate dependencies between certain optimization passes, demonstrating that the order of the passes affects the optimization quality. In some cases, the worse performing sequence can be corrected through repeated pass application. %such that they are as good as the best performing one by extending the sequence. Experiments on multi-pass sequences show that more than two optimization passes may have an impact on each other but that this always links to the previously found pairwise effects. We observe that it is important to initially choose the best order of optimization passes to get the best possible optimization for the given circuit. The experiments reveal some factors which are important to choose the best, or at least a good, order; among those, the resulting optimization sequence depends the most on the native gate set.

0.34

Circuit Hypernetworks for Quantum-Augmented Diffusion Language Models

cs.CL quant-ph ·2026-09-21 ·Xiaoqiang Wang, Mengyang Xiong, Jun Dai, Bang Liu
similarity 0.62
Abstract · Work in progress

Language models can be adapted by changing the computations applied to individual tokens. Quantum circuits offer one such approach, but evaluating wider circuits inside a large model can be computationally demanding. Here we introduce HyperQ, which adds token-conditioned quantum residual branches to a frozen masked-diffusion language model. A quantum residual branch is a module in each transformer block that reads a token's hidden state, emits the coordinates of that token's circuit, executes it, and adds the measured values back through a residual connection. The backbone remains frozen, and only the added branches are trained. Within each branch, a lightweight circuit hypernetwork emits token-specific rotation angles, coupling strengths, and measurement axes in a shared sparse circuit structure. The required expectation values have an exact classical expression whose evaluation cost grows linearly with the qubit count, enabling circuits from 16 to 64 qubits to be trained within a 1.1-billion-parameter backbone. Across downstream benchmarks, increasing circuit width raises the average score from 47.65 to 54.30. At 64 qubits, HyperQ exceeds the backbone and its low-rank-adapted counterpart by 4.71 and 3.67 points, respectively. HyperQ is fine-tuned on 20,000 prompt-response pairs, compared with 200,000 for the classical baselines. These findings support token-conditioned circuit emission as a tractable architectural approach to quantum-augmented language modelling.

0.18

Atlas: Accelerating Quantum FTQC Compilation with Optimized Algebraic Rotation Synthesis

cs.ET ·2026-11-19 ·Anbang Wu, Pu Pang, Wei Geng
similarity 0.62
Abstract

As fault-tolerant quantum computing emerges, Clifford+T gate basis becomes a popular choice where we need to decompose single-qubit rotation gates into gates in this gate basis. Quantum rotation synthesis may lead to remarkable overhead in quantum circuit compilation. Considering variational quantum eigensolver (VQE) applications as an example, a conventional UCCSD ansatz in quantum chemistry can generate $O(n^4)$ rotations for $n$ qubits. Each optimization iteration updates the rotation angles, making rotation synthesis a recurring cost that can delay the VQE training loop. We identify two sources of delay in rotation synthesis: redundant computation during synthesis and uneven synthesis times that leave workers waiting for slow requests. Atlas addresses these costs with three optimizations: search pruning skips invalid synthesis candidates through statistical inference; adaptive arithmetic avoid unnecessary high-overhead big integer/float arithmetic when decomposing the target rotation gate; batch scheduling fills the gap between the synthesis time of varied rotations. Across various benchmarks, synthesis method, and compilation machines, Atlas can consistently accelerate the rotation synthesis process by up to 12.65x.

0.29