CS Paper Radar

Fine Wrist Control as a Marker of Surgical Teleoperation Expertise

Mary Kate Gale, Shujiro Shobayashi, Sangeet Satpathy, Nitsan Davidor, Ilana Nisky, Allison Okamura

cs.RO ·submitted 2026-09-22 23:46 UTC · v1
published

Abstract

Unlike most intensely physical pursuits, surgical robotic teleoperation training focuses primarily on task outcomes rather than surgeon body posture or biomechanics during task completion. Toward the question of the role of biomechanics in surgical expertise, we sought to characterize the articular motion of expert teleoperators as compared to novice users. Twenty-seven novices and nine experts completed a non-medical cylinder-on-peg transfer task while their upper limb biomechanics were recorded via motion trackers. During more difficult motions, experts stabilized their wrist motion more than novices, while maintaining adequate range of motion in their shoulder and elbow and completing the task significantly faster than novices. This marker of expertise suggests the importance of attention to user biomechanics during teleoperation of surgical robots.

Comment
Accepted for presentation at International Conference on Intelligent Robots and Systems (IROS) 2026

Closest papers

Nearest neighbours by meaning across the whole index.

M3-Tele: A Unified Multimodal Teleoperational Framework for Compliant Whole-Body Mobile Manipulation

cs.RO ·2026-09-07 ·Hengxiang Chen, Shenwen Deng, Yujian Ma, Gan Ma, Qiang Li +1 more
similarity 0.64
Abstract · 15 pages,12 figures,a under-review journal

Executing contact-rich tasks efficiently requires the seamless integration of whole-body coordination and physical compliance regulation. However, existing teleoperation and data-collection frameworks often overlook the joint consideration of multimodal perception and coordinated whole-body operation. This limitation can reduce the efficiency and quality of demonstration collection, thereby affecting the effectiveness of downstream policy learning. In this work, we present \textbf{M3-Tele}: A Unified \underline{M}ultimodal \underline{Tele}operational Framework for Compliant Whole-Body \underline{M}obile \underline{M}anipulation, enabling stable physical interaction and capturing aligned visual, tactile, force, and proprioceptive observations during task execution. Extensive experiments demonstrate that the proposed framework significantly improves contact-rich teleoperation performance. The proposed controller reduces the force tracking error from 4.132~N to 0.346~N, the contact loss from 2.46 to 0.02 events per trial and the tactile deformation error by 65\%. User studies across four mobile manipulation tasks also verify the reliability and usability of the proposed system. Furthermore, Diffusion Policy experiments highlight the value of joint tactile and force sensing.

0.22

What Novice Operators See Changes What the Policy Learns: A User Study of Keypoint Hand Visual Representation for Teleoperated Demonstration

cs.RO cs.HC ·2026-10-20 ·Amane Yamaguchi, Shohei Kamiguchi, Masashi Hamaya, Shigeo Yoshida, Takuji Narumi +1 more
code/data similarity 0.62
Abstract · 9 pages, 8 figures, 2 tables

Imitation learning increasingly relies on novice operators, whose demonstrations fall short of experts' in number and inter-trial consistency. Operators act on what they are shown, yet how the rendering of the robot affects their demonstrations, and the policies trained on them, has not been examined. We study this question with PointHand, a teleoperation interface that renders a multi-fingered robot hand as sparse keypoints at its fingertips and joints, the same keypoints a policy can observe. In a simulated mug-in-box task, 18 novices and 4 experts collected 2,200 trials under three renderings: the real shape of the hand, all keypoints emphasized, or the thumb and index finger alone emphasized. The novices shown the thumb and index finger emphasized collected 441 successful demonstrations from 600 trials, against 320 for those shown the real shape. We then trained diffusion policies on these demonstrations, replacing the scene point cloud and proprioceptive state they observe with the hand keypoints and two object keypoints. Within 400 steps these demonstrations went from the weakest of the three novice conditions under the point-cloud policy (46.3%) to the strongest under the keypoint policy (57.3%), a gain of +11.0 percentage points in all five seeds. Those collected with all keypoints emphasized changed by at most +0.7 percentage points, and in no more than three seeds. The value of a demonstration therefore depends on the rendering shown during collection and on what the policy observes together. A shared representation can pay off on both sides, in the number of successful demonstrations and in the success rate of the policy trained on them. Project page: https://omron-sinicx.github.io/point-hand/

0.21

The Missing Touch: Spatially Distributed Tactile Feedback Brings Teleoperation Closer to Human Dexterity

cs.RO ·2026-08-19 ·Rohan Kota, Gregory Reardon, J. Edward Colgate
similarity 0.62
Abstract

A fundamental challenge in robotic teleoperation is enabling an operator to control a remote robot as effortlessly and intuitively as their own hands. Despite the growing use of teleoperation to collect demonstration data for training autonomous robot policies, teleoperated robot performance still falls significantly short of human dexterity, even for basic tasks. Here, we present evidence that a key factor contributing to this performance gap is the absence of spatially distributed tactile feedback. Using a two-degree-of-freedom (DoF) bilateral force-feedback telemanipulator paired with a 32-DoF tactile fingertip display, we show that operator performance improves significantly when localized deformations on the remote manipulator are faithfully reproduced on the operator's fingertip. In a series of teleoperation tasks, reproducing distributed contact information not only accelerated task performance but also brought teleoperated movements closer to natural human behavior by minimizing corrective actions and task completion steps, thereby reducing the deviation between teleoperated and natural trajectories by 29$\unicode{x2013}$79%. Furthermore, we found that increasing the resolution of the tactile feedback$\unicode{x2014}$by refining how finely the measured displacements were quantized for reproduction$\unicode{x2014}$compressed the state-space distribution of teleoperated motions, which has been associated with improved training outcomes for autonomous robot policies. Together, these results suggest that spatially distributed tactile feedback is essential for closing the gap between human and teleoperated dexterity and training the next generation of autonomous robots.

0.08

From Wearable Interfaces to Dexterous Policies: Contact Shifts and Tactile Representations

cs.RO ·2026-10-06 ·Ruitong Tian, Fang Xu, Noah B. Wilson, Xianyao Li, Eric Jing Du
similarity 0.61
Abstract · 8 pages, 6 figures

Unlike conventional teleoperation, wearable interfaces allow operators to collect dexterous demonstrations through their own hand motions while directly interacting with task objects. This direct interaction reduces dependence on the target robot during collection, but it also makes the collection hardware part of the physical process that generates each demonstration. Interface geometry can influence both how a task is performed and what tactile observations are recorded for learning. We study two versions of a DexUMI-family exoskeleton that share the same robot command definition, mapping procedure, and tactile module type but differ in hand-side geometry. The revised interface reduces reported physical demand, improves selected device ratings, enables tactile access in a precision grasp that is mechanically blocked by the baseline, and produces task-dependent changes in recorded contact. Lid twisting primarily exhibits a change in contact location, whereas egg carton opening primarily exhibits a change in contact occurrence. We then train matched policies using either a binary aggregate input or a spatial-plus-force input. On lid twisting and egg carton opening, policies trained on revised-interface demonstrations achieve higher success than those trained on baseline demonstrations, with a significant pooled interface effect. Across these and two additional tasks, USB insertion and soldering tool pick and place, the spatial-plus-force input likewise outperforms binary aggregation. These results show that wearable collection hardware is part of the data-generation process for robot learning. Such interfaces should therefore be evaluated not only through operator experience, but also through the tactile interactions they make recordable and the policy performance their demonstrations support.

0.19

Design and Evaluation of a Body-Machine Interface as an Alternative Control Paradigm for Pedal-based Sewing Machines

cs.HC ·2026-11-18 ·Ashrut Aryal, Rajiv Ranganathan, Ranjan Mukherjee
similarity 0.60
Abstract

Body-machine interfaces (BoMIs) exploit body movements to control assistive devices; they have been evaluated primarily in tasks such as cursor control or robotic manipulation where the entire movement repertoire is devoted toward device control. However, tasks with multiple concurrent processes require the user to share the movement repertoire used for device control with other body movements for task execution. This issue is examined here in the context of sewing, where the sewing machine is typically controlled by a pedal in coordination with hand movements for guiding the fabric. We evaluated the learning of a trunk-controlled BoMI for sewing machine control, and compared it with conventional pedal control. Twenty-four novice participants (12 BoMI, 12 Pedal) completed 10 trials of a standardized sewing assessment followed by 3 trials of a transfer task. The BoMI mapped trunk movements to the sewing machine's full functional repertoire, which included continuous speed control of the needle, and discrete actions such as presser-foot and needle lifts. The two groups learned at comparable rates, showing similar completion times and error counts; for both groups, completion time reduced by approximately 30\%. Additional analyses showed that the BoMI group had fewer presser-foot lift errors during training and fewer errors on the first transfer trial. Both groups also exhibited similar subjective workload. These findings collectively demonstrate that a BoMI interface can support sewing-machine control during concurrent manual activity, highlighting the potential for using BoMIs for increasing accessibility in industrial workplace contexts.

0.17

Hidden Variables Behind Real-Robot Data Quality: Lessons from Hundreds of Thousands of Hours

cs.RO ·2026-11-17 ·Maniformer Real-World Manipulation Team, Che Tsang Calvin, Xingyu Chen, Bowen Jiang, Naixiang Gao +37 more
code/data similarity 0.60
Abstract · Technical report. Project page: https://teleop.agibot.com/

As real-robot data collection scales, collection-system design shapes both operator efficiency and the behaviors learned by robot policies. Workspace limitations, control-interface friction, and latency can introduce pauses, detours, and corrective motions into otherwise successful demonstrations. We investigate these effects across embodiment, teleoperation control, and data consistency, combining a kinematic study of 25 dual-arm robots, controlled teleoperation experiments, and real-robot evaluation of fine-tuned $π_{0.5}$ policies. The embodiment study shows that positional reachability overstates orientation-aware task coverage and that modest shoulder motion can substantially expand the effective workspace. Teleoperation experiments show that parallelizing body-part control reduces task completion time by 43-53%, while compliant control improves success and reduces peak contact forces on constrained and contact-rich tasks. Policy-learning experiments show that demonstrations must capture the visual information underlying action choices: active-search demonstrations improve arm-selection accuracy from chance (50%) to 100%. Calibration experiments reveal that mixed-calibration training data remain usable in our tested configurations when an inference-aligned subset is retained, whereas inference-time miscalibration causes all 30 trials to fail. Policies also retain approximately 90% of the extra path length in detour-contaminated demonstrations, showing how inefficient operator motions persist in learned behavior. Together, these findings connect collection-system design to demonstration quality and downstream policy execution. They motivate evaluating effective workspace, control efficiency, observation completeness, calibration alignment, and motion quality before scaling collection, and addressing system-induced compensations at their source.

0.36

Embodied Task Agents Can Perform Fine Manipulation through Tactile In-Context Learning

cs.RO ·2026-10-20 ·Yubang Wang, Zezheng Huai, Yifei Zhang, Jinhao Wu, Yitong Chen +6 more
code/data similarity 0.60
Abstract · 24 pages. Project page: https://no-518.github.io/tactile-eta/

Can embodied task agents use tactile experience to perform fine manipulation without task-specific model training? We investigate this capability through Tactile-ETA, a system that incorporates tactile experience into an embodied task agent through in-context learning. Successful expert demonstrations show how contact changes during manipulation. We pair each recorded robot movement with its camera views and bilateral tactile observations. We keep tactile observations at the start and end of each movement and add two neighboring time points when the tactile images change markedly in between. The agent combines these demonstrations with current vision, tactile observations, and proprioception to select actions through general-purpose robot tools, without updating model parameters. Across four simulated manipulation tasks, adding tactile observations to the same two expert demonstrations increases average success from 15.75% to 24.00%, with current sensing and execution interfaces held fixed. Further experiments show that performance depends on the sensory content and representation of demonstrations, while comparing agent models on Lift Bottle reveals substantial differences under the same system configuration. On the real-robot tasks, demonstrations with aligned visual and tactile observations increase the task success rate from 0% to 60%. These findings demonstrate the feasibility of using tactile experience in context for fine manipulation and suggest a path toward extending embodied task agents to additional sensory inputs.

0.46

A Controlled Comparison of Manual and Teleoperated Intraocular Instrument Motion for an Input Device

cs.RO cs.HC ·2026-09-08 ·Korab Hoxha, Mirza Imamovic, Angelo Henriques, M. Ali Nasseri
similarity 0.59
Abstract · This work has been submitted to IEEE Access for possible publication

Input devices for robotic microsurgery are frequently described as preserving the surgeon's trained technique, but the claim is rarely measured. We compared manual and teleoperated intraocular instrument motion with the trocar constraint, the instrument, the eye model and the tracking source common to both conditions, so that the control interface was the only factor varied. Prior comparisons cannot hold the instrument fixed, because a robotic instrument is not the tool used manually. Sixteen participants performed a navigation task on a commercial ophthalmic simulator by hand and through a three-degree-of-freedom input device commanding a five-joint robot. Task outcome was equal but at ceiling: every participant acquired all five targets under both interfaces with no retinal or lens injury. Execution differed on every measure. Teleoperated trials took three times as long at a quarter of the median speed, covered less than half the angular working range, and were broken into 3.5 times as many separate movements. Completion time and movement fragmentation improved substantially across four trials of practice and had not plateaued; the measures set by the configured rate ceiling and joint limit changed the least. Finger activity doubled and pinch variability tripled, so reducing instrument degrees of freedom redistributed manual effort rather than reducing it. The interface preserves the outcome and reshapes the execution.

0.30