CS Paper Radar

Q-MAP: Multi-Platform Benchmarking of Distributed Quantum Computing for Coherent Controlled Islanding

Yuqi Jiang, Zhiding Liang, Qiang Guan, Yan Li, Ganesh Kumar Venayagamoorthy

eess.SY quant-ph ·submitted 2026-08-19 15:13 UTC · v1

Abstract

The integration of distributed energy resources into power networks is accelerating. The resulting variability narrows operating margins, so a disturbance can cascade into a wide-area blackout. Controlled islanding arrests that propagation by splitting a compromised grid into self-sustaining islands that keep coherent generators together. Exact classical solutions become intractable as the bus count and island number grow. Gate-based quantum optimization provides a different route through this combinatorial space, although its reach is limited when one circuit carries every bus assignment, since qubit count and depth then follow grid size. In this study, a round-synchronous distributed quantum computing framework is developed for coherent controlled islanding under a fixed per-circuit qubit budget. Every round derives all regional subproblems from one frozen grid-wide snapshot, dispatches them to independent quantum backends at the same time, and merges the returned candidates classically into one globally evaluated update. Circuits executed in parallel therefore keep a constant size as the grid grows, and a round costs the slowest region rather than the sum of all of them. Benchmarking spans IEEE systems from 9 to 300 buses on simulation and on quantum processors of different architectures. The framework attains optimal and operationally feasible partitions on every platform under noise, even where compilation cost differs by nearly an order of magnitude. Bounding width in this way places grids beyond the reach of monolithic circuits within range of present devices and establishes a multi-backend baseline for quantum computing in large-scale power-system optimization.

Closest papers

Nearest neighbours by meaning across the whole index.

SPLIT-Q: A Scalable Sequential Quantum Computing Framework for Coherent Controlled Islanding

eess.SY quant-ph ·2026-08-13 ·Yuqi Jiang, Zhiding Liang, Qiang Guan, Yan Li, Ganesh Kumar Venayagamoorthy
similarity 0.85
Abstract

Growing integration of distributed energy resources increases power-system variability and uncertainty. During disturbances, these effects can intensify generation-load imbalances and cascading failures. Controlled islanding limits their propagation by partitioning a compromised grid into connected, electrically sustainable islands. However, classical methods face rapidly growing computational costs as network size and island count increase. Quantum optimization offers an alternative for exploring this combinatorial partition space. Yet monolithic quantum formulations encode all assignment decisions in one circuit, causing qubit demand and circuit complexity to scale with network size. In this study, a qubit-bounded sequential distributed quantum approximate optimization algorithm (QAOA) framework is proposed to tackle coherent controlled islanding under limited quantum resources. It formulates the optimization as boundary-conditioned regional quadratic unconstrained binary optimization (QUBO) subproblems that are solved sequentially within a fixed qubit budget. Thus, circuit width remains independent of network size, with aggregate quantum workload scaling linearly on bounded-degree networks. Evaluation covers eleven IEEE systems from 9 to 300 buses using IBM quantum computing resources, with Gurobi and monolithic QAOA as references. Across all systems, the framework recovers feasible Gurobi-optimal partitions under noise, confirming the resilience of its solution quality. The results further show that the proposed method substantially reduces quantum-resource demand and circuit complexity relative to monolithic QAOA, allowing large islanding problems to be addressed within current hardware limits. The proposed framework provides a feasible and scalable pathway for quantum optimization in large-scale power systems.

0.04

Towards Reproducible Evaluation of Distributed Quantum Circuit Partitioning Algorithms

cs.DC quant-ph ·2026-08-27 ·Javier Vela-Tambo, Davud Azizov, Tian Guo
code/data similarity 0.69
Abstract · Accepted at IEEE QCE 2026 Workshop: Distributed Quantum Computing Systems and Infrastructure

Distributed Quantum Computing (DQC) addresses the physical scaling limitations of monolithic quantum processors by networking modular Quantum Processing Units (QPUs). Efficient execution of quantum algorithms on DQC architectures requires compiling them across QPUs while minimizing inter-QPU communication bottlenecks, primarily through circuit partitioning. However, current evaluations of state-of-the-art partitioning heuristics focus primarily on the total entanglement cost of the partitions, failing to capture the broader structural and temporal overheads introduced by distributed network constraints. This paper addresses this evaluation gap by applying established monolithic benchmarking metrics to partitioned distributed circuits to quantify the performance impact of network constraints. Using an open-source, automated evaluation pipeline, we systematically assess diverse partitioning algorithms across standardized workloads and quantum network topologies. Our empirical results reveal that partitioning algorithms with comparable entanglement costs can still introduce drastically different physical execution penalties. By exposing these hidden trade-offs, such as severe increases in circuit depth and substantial reductions in gate density, this study demonstrates that comprehensive circuit-level metrics are essential for guiding the future design of DQC compilers.

0.21

Quantum Computing in Next-Gen Smart Grid Operations: A Comprehensive Review

eess.SY ·2026-09-16 ·Md Habib Ullah
similarity 0.69
Abstract

The rapid proliferation of grid-edge distributed energy resources has significantly increased the operational complexity of modern power systems. Consequently, conventional computational techniques face growing scalability and computational-efficiency challenges in addressing large-scale optimization and control, uncertainty management, nonlinear dynamics, and combinatorial decision-making in smart grid operations. Quantum computing has therefore emerged as a promising computational paradigm that can complement classical methods in addressing selected computationally intensive problems. In this context, this paper presents a comprehensive structured review of quantum computing applications in smart grid operations. Following a transparent keyword-based literature search, the paper classifies and assesses existing studies across monitoring and estimation, system planning, operation and control, security, reliability and resilience, stability assessment, data-driven intelligence, and digital twin technologies. The paper also describes fundamental quantum-computing concepts and key algorithms, highlighting their relevance for power system applications. Furthermore, it reviews the current state of quantum hardware, software frameworks, simulators, cloud services, and emerging hardware-agnostic ecosystems that support cross-platform application development and deployment. The reviewed studies are examined by implementation environment, benchmarking practices, application scale, and evidence of computational advantage. Finally, the principal challenges associated with practical implementation are discussed, and future research directions are outlined. This paper provides a consolidated and evidence-calibrated perspective on the current state and future potential of quantum computing for next-generation smart grid operations.

0.11

Resource-Aware Scheduling for Distributed Quantum Computing

cs.NI ·2026-10-21 ·Connor Howe, Raghav Mundada, Jake O'Shaughnessy, Ibrahim Abdullahi, Ali Anwar
similarity 0.68
Abstract

Distributed quantum computing (DQC) is a promising near-term approach for executing circuits that exceed the capacity of a single quantum processing unit (QPU). Prior work has made significant progress on circuit partitioning and reconstruction, but practical DQC requires more than cutting a circuit into smaller pieces. A runtime system must determine whether to execute the circuit intact, cut it for sequential execution on one QPU, or distribute it across multiple QPUs, while accounting for queueing, communication, reconstruction, and hardware constraints. We present a resource-aware scheduler for DQC that compares these execution alternatives at runtime using explicit models of QPU execution, communication, and host-side reconstruction, together with hardware-informed timing derived from simulated IBM QPUs. By treating communication and reconstruction as first-class scheduling costs, the scheduler selects execution plans using a more realistic view of end-to-end overhead than cutting-only approaches. Across our experiments, reconstruction accounts for over 83% of cutting overhead, distributed execution reduces P90 latency by up to 39% relative to uncut single-QPU execution, and scheduling overhead itself remains negligible, never exceeding 0.038% of end-to-end job latency. Together, these results show that DQC must be treated as a runtime scheduling problem over both quantum and classical resources, not just circuit partitioning.

0.15

Compiling Together: High-Throughput Distributed Quantum Computing via Multi-Compilation

cs.AR quant-pheess.SY ·2026-10-02 ·Yipei Liu, Sen Zhang, Zebo Yang, Lei Yang
similarity 0.65
Abstract

Quantum computing is a promising paradigm for problems that are challenging for classical machines, but realizing that promise requires far more qubits than a single processor can offer. Distributed quantum computing (DQC) scales out by connecting multiple quantum processing units (QPUs), at the cost of making entanglement the scarce resource: every remote gate consumes a Bell pair, and inter-QPU links generate Bell pairs at finite rates orders of magnitude slower than local gates. Since quantum programs are executed repeatedly, this rate bounds how fast shots complete and thus how fast results are obtained. Existing DQC compilers emit a single implementation per circuit, so throughput is capped by its busiest link while other links stay idle. We observe that alternative compilations of the same circuit are logically equivalent yet stress different links; executing them concurrently and pooling their samples converts idle Bell pairs into additional shots. We formulate the joint selection of compilations and allocation of shots under per-link Bell-pair capacities as Candidate-Constrained Max-Shot Allocation (CMA), prove it NP-hard, and solve it with a dynamic program and its approximate variant AppDP, a compact MILP, and a greedy heuristic Effi. In simulation on six-QPU networks, multi-compilation raises throughput by 2-4.5* over the single compilation and correspondingly improves output fidelity under equal Bell-pair budgets. On hardware, it increases measured fidelity by up to 93% and reaches the single-compilation fidelity in up to 10* less time. Scaling to 36 QPUs and 144-qubit circuits, MILP improves throughput over the single compilation by 76.8% on average across 48 configurations while Effi allocates in milliseconds.

0.16

Quantum Broker: QoS-Aware Distribution of Quantum Computations

cs.ET quant-phcs.SE ·2026-10-20 ·Giuseppe Bisicchia, Alessandro Bocci, Jose Garcia-Alonso, Juan Manuel Murillo, Antonio Brogi
benchmarkcode/data similarity 0.65
Abstract · 32 pages

Cloud-accessible quantum computing has made heterogeneous Quantum Processing Units (QPUs) available through provider platforms that differ in qubit technology, calibration state, queueing behavior, and pricing model. This heterogeneity makes execution management a quantum-engineering concern: a quantum circuit may be executable on several backends, but the resulting cost, latency, fidelity, and reproducibility depend on backend selection and on how measurement shots are allocated. This paper presents the Quantum Broker, an open-source and provider-agnostic framework for Quality-of-Service-aware quantum execution management. The framework operationalizes shot-wise distribution by exploiting the statistical independence of quantum measurement shots to dispatch a single circuit across multiple heterogeneous QPUs according to user-defined constraints and optimization objectives. It combines a modular execution architecture, interchangeable backend-profiling strategies, and the Quantum QoS Specification Language (QQSpec), a declarative language for expressing QoS requirements. Dispatch planning is supported by two solver backends: a mixed-integer linear-programming (MILP) solver, and a nonlinear dual-annealing solver. Experiments on benchmark quantum circuits and noisy simulator backends show that the Quantum Broker can produce feasible QoS-aware dispatch plans under heterogeneous backend conditions and can improve QoS satisfaction with respect to single-backend and naive multi-backend baselines. The results also expose a practical trade-off between planning time and dispatch quality, with the nonlinear solver producing higher-quality allocations at increased computational cost. Overall, the Quantum Broker provides an extensible execution-management layer for engineering portable, reproducible, and QoS-aware quantum software over fragmented quantum cloud infrastructures.

0.24

Benchmarking the computational power of quantum computers

cs.ET quant-phcs.PF ·2026-09-10 ·Timothy Proctor, Oliver Hart, Oliver Widzowski Maupin, Matthew Girling, Daniel Hothem +25 more
benchmarkhighly cited similarity 0.64
Abstract

Quantum computing hardware is advancing rapidly toward utility-scale machines that will enable scientific breakthroughs. Many teams are pursuing distinct and difficult-to-compare routes to this goal, using different qubit technologies and logical architectures. Tracking progress toward quantum utility therefore requires rigorous benchmarks that measure computational capability relative to utility-scale challenge problems and enable fair comparison across disparate platforms. Here we demonstrate direct, cross-platform measurement of quantum computational capability using a new benchmark that quantifies the size of the largest computationally relevant quantum circuits that a machine can execute successfully and the speed at which it can execute them. We apply this quantum universal operation performance system (QUOPS) experimentally to leading processors from Quantinuum, Google, and IBM, computing directly on physical qubits. Translating state-of-the-art resource requirements for recognized challenge problems that represent useful quantum computation into effective QUOPS circuit sizes shows that computational capability must grow by 5 orders of magnitude, motivating fault-tolerant approaches. We use the same benchmark to assess the performance of a simple fault-tolerant logical-qubit processor implemented on up to eight [[7,1,3]]-encoded logical qubits using Quantinuum Helios-1, and project the growth of capability across successive generations of fault-tolerant quantum computers to show how QUOPS can track progress toward quantum scientific utility.

0.45

Online Scheduling and Distribution of Quantum Circuits over Quantum Networks

cs.ET quant-ph ·2026-10-19 ·Yukun Yang, Himanshu Gupta
published similarity 0.64
Abstract · 8 pages, 5 figures. Full author version revised after acceptance; the QCNC 2026 version was shortened to meet the conference page limit

Emerging quantum networks enable distributed quantum computing (DQC) by interconnecting modest, noisy quantum processors. However, practical deployments face tight memory budgets, probabilistic entanglement generation, and decoherence, all while serving multiple users. In realistic settings -- cloud execution, iterative/interactive workloads and concurrent jobs -- circuits do not arrive in a single batch but as a stream. This creates a fundamentally online problem: the system must react to stochastic arrivals, balance latency and throughput, and remain stable under varying loads without foresight of future jobs. We study Online Scheduling and Distribution of Quantum Circuits (OS-DQC) and formalize the online scheduling problem for quantum networks: circuits arrive over time and must be executed without knowledge of future arrivals. At each event time (arrival or completion), the system decides which waiting circuits to launch and how to place their qubits, while accounting for congestion from in-flight circuits and constraints due to finite memories and decoherence. The objective is to minimize the mean completion time and makespan under these physical and resource constraints.

0.33