CS Paper Radar

Same Bit Width, Different Outcomes: Post-Training Quantization of Text-to-Speech Across Architectures

Se Un Park, Yutae Kim, Junyoung Park

eess.AS cs.LGcs.SD ·submitted 2026-09-24 03:41 UTC · v1
code/data

Abstract

Post-training quantization (PTQ) reduces the cost of on-device text-to-speech (TTS), but published evaluations cover one system or method. We evaluate PTQ across TTS architectures under one protocol with three core models, weight and activation ablations of eight more, and two held-out models quantized blind. Four-bit per-channel weights reduce UTMOS, a predicted mean opinion score, by 2.8 on Supertonic and 0.07 on Kokoro, and per-tensor scaling can cause severe degradation even at 8 bits. The same bit width yields different outcomes, because the sensitive component is model-specific and not reliably predicted from the model class. A staged ablation procedure identifies it, and per-layer GPTQ can restore it to within 0.1 UTMOS. Real int8 and int4 kernels reproduce the simulated ordering at hardware-dependent cost. On a Mac mini, a 4-bit weight kernel runs Supertonic at 0.60x the fp32 latency while int8 is slower, so each configuration requires validation on the target runtime.

Comment
Submitted to ICASSP 2027. 4 pages plus references. Code and run records: https://github.com/uxfacdev/tts-ptq-map

Closest papers

Nearest neighbours by meaning across the whole index.

TTS-Q: Speaker-Aware Post-Training Quantization of Text-to-Speech Diffusion Transformers

cs.SD cs.LGeess.AS ·2026-08-11 ·Xiaoqin Feng, Yuqi Li, Weilun Feng, Yi-Cheng Lin, Kai Li +7 more
similarity 0.74
Abstract

Zero-shot text-to-speech (TTS) can clone a voice from seconds of audio. Yet the quality comes from billion-parameter diffusion transformers whose size and multi-step sampling put them out of reach of the on-device, assistive, and real-time applications that need them most. Post-training quantization (PTQ) shrinks such models without retraining, but it has been built for language and vision, not speech. At 4 bits, a strong quantizer leaves intelligibility close to full precision but consistently erodes speaker timbre, so error rates stay low while the voice drifts from the target speaker. We ask why quantization hurts speech, where the damage lives, and whether it can be repaired without retraining. To find out, we run the first 4-bit weight-and-activation (W4A4) PTQ study of a TTS diffusion transformer at 1B and 3.5B. The timbre cost comes from both the weight and the activation quantization, but only the activation part has the timestep structure a precision schedule can exploit. We therefore introduce TTS-Q, which selects hard-to-quantize items from task-matched calibration candidates and applies a budget-balanced mixed-precision schedule that assigns higher precision to late-step feed-forward activations. TTS-Q recovers timbre best at both scales, at no cost to intelligibility. Separately, the deployed calibrated-W4A4 reference reduces peak memory on GPU, providing a practical reference for resource-constrained TTS deployment.

0.04

Not All Frames Are Equal:Difference-Aware Quantization for Ultra-Low-Bit ASR

cs.SD ·2026-10-14 ·Woori Jeon, Jungmin So
top venue similarity 0.67
Abstract · 5 pages, 2 figures, 2 tables. Accepted at Interspeech 2026

Post-training quantization (PTQ) methods such as GPTQ and AWQ compress large language models effectively, but applying them to automatic speech recognition (ASR) at ultra-low bit-widths (2-3 bits) causes severe transcription degradation. Unlike discrete text tokens, speech activations are highly correlated in steady-state and zero-padded regions yet change rapidly at phonetic boundaries; when all frames contribute equally to the Hessian, static frames dominate calibration and obscure informative transitions. We propose DiffAQ, which computes frame-to-frame activation differences to measure the rate of acoustic change and assigns Hessian importance proportionally, concentrating quantization precision on phonetically critical frames. As a training-free modification to GPTQ, DiffAQ consistently reduces WER across various Whisper sizes and standard benchmarks, with the largest gains at 2-bit precision where baseline methods frequently produce degenerate outputs.

0.27

The Structure of Quantization Damage in LLMs: Why the Next Bit Should Be Spent Globally

cs.LG cs.CL ·2026-09-01 ·Jundong Hu, Shekar Ramachandran
similarity 0.66
Abstract · Preprint. Under review at a NeurIPS 2026 workshop. 11 pages, 4 figures, 8 tables

Post-training quantization (PTQ) is widely used to reduce the cost of serving large language models (LLMs), but its accuracy cost is uneven and is often tuned per model. We study where quantization damage occurs and how to allocate a small additional precision budget. Using causal mixed-precision intervention as ground truth (raise each layer to 8-bit in turn and measure the accuracy it recovers) across 9 open-weight models in 4 architecture families, we test 3 intuitive hypotheses: that quantization damage lives in task circuits, where the model computes, or in weight statistics. None of them predicts which layers benefit from restored precision. Recovery is instead diffuse: for 8 of 9 models, recovering 75% of the gap takes roughly half the layers; the lone exception, Qwen3-8B, is sharply concentrated. At a matched precision budget, spending it globally on finer quantization granularity beats locally repairing the most recoverable layers for all 8 group-128-compatible models (all but OpenLLaMA, whose width rules out group-128), by 21-52 points, including the concentrated Qwen3-8B. We report 2 secondary findings: the residual is budget-limited (8-bit is near-lossless in our evaluation across RTN, GPTQ, and AWQ), and the location of peak recovery correlates with architecture within a family, though not across families. Within this budget setting, global granularity is a better default than selectively protecting critical layers. More broadly, cheap signals that correlate with quantization damage do not necessarily identify where restoring precision improves accuracy; this must be tested with causal intervention.

0.39

RVQ Position Aware Speculative Decoding for On Device Text to Speech

cs.SD ·2026-09-29 ·Berkin Durmus, Eduardo Pacheco, Zach Nagengast, Atila Orhon
similarity 0.65
Abstract

Autoregressive decoding (AR) with Transformer models is memory bandwidth bound at single stream inference, the typical deployment regime for on device text to speech (TTS). Real time streaming with Qwen3-TTS requires more than 200 sequential model calls per second, dominated by the inner loop MultiCodeDecoder that emits the 15 residual vector quantization (RVQ) codes per 80 ms audio frame. We propose RVQ position aware speculative decoding for the MultiCodeDecoder, attaining 2.47 accepted tokens per model call at $5\times10^{-4}$ percent added parameters and 10 to 20 percent per round speculation/verification overhead, reducing real time synthesis from 200 to 88 sequential model calls per second. The scheme is distributionally lossless under the deployed top-k sampling, and WER parity with the original system is consistent with this guarantee. We deliver 2 to 2.2x speedup for RVQ token generation with Qwen3-TTS 0.6B on recent iPhone and Apple Silicon Mac devices.

0.16

Activation Outliers Matter: Robust Recovery for Quantized Multimodal LLMs

cs.LG ·2026-08-27 ·Tanzila Rahman, Mehran Taghian Jazi, Yunke Peng, Zhuang Ma, Anandharaju Durai Raju +8 more
similarity 0.65
Abstract · 14 Pages, 5 figures, 5 tables

Low-bit quantization offers a promising avenue for reducing the computational and memory demands of Multimodal Large Language Models (MLLMs). Recent hardware support for low-precision formats, ranging from MXFP8 to ultra-low-bit formats such as MXFP4 and HiF4, has accelerated research into efficient MLLM training and deployment. In this work, we present a systematic study of these quantization schemes in representative MLLMs that span both video generation and reasoning tasks. Our analysis shows that MXFP8 achieves near-lossless performance, whereas aggressive 4-bit quantization leads to significant degradation. Through extensive ablations, we identify activation quantization as the primary source of this performance loss, contributing substantially more than weight quantization. Motivated by this observation, we propose Residual Fallback Quantization (RFQ), a lightweight activation reconstruction framework that supplements the primary ulta-low-bit activation representation with an auxiliary quantized residual pathway. By explicitly modeling and compensating for quantization errors, RFQ improves activation fidelity while preserving the efficiency advantages of ultra-low-bit computation. RFQ requires no architectural modifications and incurs negligible computational overhead. Extensive experiments on Wan2.2 and Qwen3-VL demonstrate that RFQ consistently recovers a substantial portion of the performance lost under the quantization of MXFP4 and HiF4, significantly narrowing the gap to BF16 baselines across both generation and 4 reasoning benchmarks. Our findings establish activation quantization as the dominant bottleneck in ultra-low-bit MLLMs and highlight residual-based activation reconstruction as an effective and practical strategy for robust 4-bit deployment.

0.27

Post-Training Ternarization of Qwen3-4B Capability, Effective Bit Budget, Storage Compression, and Deployment

cs.AI cs.LG ·2026-09-02 ·Anirudh Malik, M Sparsh Mehra, Poojith Devan
similarity 0.64
Abstract · Weight-only post-training ternarization of a 4B-parameter instruction-tuned language model. Activation quantization and end-to-end generatio…

Ultra-low-bit language models can reduce storage and memory bandwidth, but a nominal "1.58-bit" label does not fully describe the stored representation, retained capability, or runtime behavior. We study an end-to-end post-training conversion of Qwen, an instruction-tuned 4B-parameter model, using KOTMS rotation, E2M-ATQ ternarization, and GPTQ-style error compensation from TWLA. The experiment is weight-only: activations remain at 16-bit precision, so ILA-AMP is omitted. We evaluate effective bit accounting, task capability retention, perplexity, calibration sensitivity, checkpoint composition, and deployment behavior. The final conversion uses 1.641 effective bits per weight for quantized linear weights, with 81.62% of model parameters targeted. Across ten scored capability comparisons, accuracy falls from 64.5% to 54.7%. Degradation is uneven: BoolQ retains 84.6% chance-corrected teacher performance, while ARC-Challenge retains 43.8%. Perplexity rises from 13.639 to 18.748 on WikiText-2, 24.700 to 31.992 on PTB, and 19.831 to 28.966 on C4. A subsequent packing run preserves the ternary planes and scales, reducing reported model size from 8.29 GiB to 3.96 GiB with essentially unchanged perplexity. A separate third-party packing attempt was lossy and is excluded from the primary artifact claim. The packed artifact has not been benchmarked end-to-end for task accuracy or generation throughput. A preliminary Triton GEMV microbenchmark is 4.6x slower than FP16 cuBLAS on one tested shape. We therefore do not claim that compression alone yields faster inference.

0.19

Realizing Low-Precision Storage and Sparse Execution in a Folded FPGA Speech Enhancer

eess.AS cs.ARcs.LG ·2026-10-26 ·Clément Laroche
similarity 0.64
Abstract · 5 pages, 3 figures, 2 tables. Submitted to IEEE ISCAS 2027

Hardware-aware training often optimizes FPGA resources, latency, or bit operations, but folding changes what compression saves: shared arithmetic decouples precision, weight storage, and scheduled work. We derive training objectives from the measured costs of a folded streaming speech-enhancement accelerator. Mixed-precision weights reduce on-chip storage; structured channel sparsity removes entire operations from the engine schedule. We deploy a bit-exact implementation on the Kria KV260. The best sparse model eliminates 47.3% of convolution MACs, cutting frame time by 45% (1.86 to 1.03 ms) and dynamic energy by 60% (83 to 33 $μ$J/frame) against a storage-priced model measured in the same session, with higher speech quality. Relative to the most efficient dense build measured separately, frame time falls by 42% and energy by 48%. Reducing weight width from 8 to 6 bits lowers dynamic power by 27% but changes frame time by less than 5%. Plain channel group-lasso removes more work than cycle-cost-weighted lasso. Thus, folded-accelerator training should price storage and removable work separately, rather than rely on a single bit-operation metric.

0.32

Compress and Forget: bitsandbytes Quantization Amplifies Proactive Interference in LLMs

cs.CL cs.LG ·2026-08-19 ·Shayan Shahrabi-Farahani, Dara Rahmati
benchmarkcode/data similarity 0.64
Abstract · 21 pages, 6 figures, 11 tables. Author list formatting simplified. Code and data released at https://github.com/ShayanShahrabi/compress-and-…

Proactive interference (PI) is a documented failure mode in large language models in which retrieval of a repeatedly overwritten value degrades as prior overwrites accumulate, mirroring a classical phenomenon in human working memory. Post-training quantization (PTQ) is now the default deployment path for open-weight models, yet its effect on this failure mode has not been tested. We evaluate three precision levels (FP16, INT8, INT4/NF4, via bitsandbytes) across three architecturally distinct instruction-tuned models (Qwen2.5-7B-Instruct, Mistral-7B-Instruct-v0.3, Phi-3.5-mini-instruct), holding the retrieval task fixed. INT4 quantization significantly reduces accuracy under high interference in every model (e.g., from 81.0% to 68.3% for Qwen), confirmed by paired McNemar's tests ($p \le 2.6 \times 10^{-6}$) and a mixed-effects regression spanning all interference levels; INT8, often assumed safe, also carries a smaller but real penalty in two of three models. The effect is specific to semantically similar (word-type) distractors and reverses sign under a numeric control condition, and is mechanistically linked to a rise in same-key intrusion errors under INT4 (from 21.5% to 24.6% of trials, $p = 4.8 \times 10^{-7}$). A follow-up ablation shows the effect originates in the quantized transformer backbone rather than the output projection layer. These results suggest that bitsandbytes 4-bit quantization can impose an additional cost on applications relying on long, updatable, semantically dense contexts, even when aggregate benchmark accuracy appears largely unaffected. We release our code and tokenizer-verified vocabulary construction method at https://github.com/ShayanShahrabi/compress-and-forget

0.58