CS Paper Radar

Baseline Shape Decides the Verdict: A Controlled Re-Examination of Ternary Language Models at 60K Parameters

Gautam Veldanda

cs.CL ·submitted 2026-09-24 11:24 UTC · v1
code/data

Abstract

Ternary (1.58-bit) weights are attractive for microcontroller-class language models, but the sub-1M-parameter regime rests mainly on isolated, single-seed comparisons. One prominent example reports that a routed ternary block (convolution, diagonal SSM and sparse attention mixed by a per-token router) beats a parameter-matched full-precision transformer by 22% at 60K parameters, attributing this to inductive bias. We re-run it under one fixed recipe, three seeds per cell, 98 byte-level runs on one laptop. (i) Baseline shape dominates: at a 16M-byte budget, param-matched transformers span 22.6% in validation loss purely by depth/width choice - far more than any architecture effect we measure there - and the best-shaped transformer ties the routed model, so the published margin is at least partly a baseline-shape effect; the ordering of shapes reverses with budget, so no single fixed shape can be trusted. (ii) At 130M bytes the routed model does win, by 22.2-24.0% over the three transformer shapes we evaluate there - but a plain gated diagonal-SSM block beats it by a further 9.1%, and the routed model's own router puts most of its weight on its recurrent pathway, so the gain does not require routing. (iii) The ternary penalty differs by architecture at the larger budget (+5.3% best transformer vs. +19.5% routed, +28.1% gated SSM), but we cannot attribute that to architecture alone: our transformers keep learned positional embeddings in full precision, 11-22% of their parameters, so they are less quantized than the models they are compared with. (iv) A 90/10 full-precision-then-ternary schedule beats all-ternary training, but only at a stage-2 learning rate about 10x the pretraining peak; at a conventional fine-tuning rate it looks 15.3% worse, reversing the conclusion. The from-scratch baseline was not itself learning-rate tuned, which bounds (iii) and (iv). Code and run logs released.

Comment
11 pages, 1 figure. Code and run logs: https://github.com/veldanda/ByteLM (tag p1-v1). Zenodo: https://doi.org/10.5281/zenodo.22937824

Closest papers

Nearest neighbours by meaning across the whole index.

SMELT: Scaling Laws for Compute-Matched MoE Looped Transformers

cs.LG ·2026-09-01 ·Shaowen Wang, Ge Zhang, Kairong Luo, Yuhao Wu, Shaofan Liu +4 more
highly cited similarity 0.62
Abstract · 36 pages, 25 figures

Looped Transformers increase effective depth by iterating a shared block of layers, but most evaluations compare at fixed model size, conflating architectural advantage with extra FLOPs. We study looping on Mixture-of-Experts Transformers while closely matching per-token FLOPs, total non-embedding parameters, and KV cache. Through a series of ablations, we arrive at a recipe we call SMELT (Sparse MoE Transformer, middle layers Loop Twice), which loops the middle half of layers twice while matching the unlooped Baseline on all three budgets. We scale SMELT across four sizes up to 54B non-embedding parameters and fit a separate Chinchilla-style scaling law for each architecture. SMELT's loss drops faster with compute, saving 6.8--18.0\% of training FLOPs on the compute-optimal frontier. The advantage transfers to downstream benchmarks beyond what validation loss predicts, is largest on Code, and grows with sample length and the number of in-context examples. Mechanistic analysis shows that the second visit reduces the attention sink and redirects mass toward content-relevant tokens, an inductive bias that may underlie the observed performance gains. These results show that looping can improve Transformers even under budget matching, offering a practical recipe that turns depth reuse into measurable gains.

0.36

Nested Byte-Level Vocabularies Are Cheap to Deploy and Expensive to Share: A Pre-Registered Negative Result

cs.CL cs.AIcs.IR ·2026-08-28 ·Christos Koutsiaris
code/data similarity 0.62
Abstract · 5 pages, 2 figures, 4 tables. Pre-registered study. Code and reproducibility materials: https://github.com/unseen1980/captok

A byte-level BPE tokenizer is an ordered list of merge rules, so applying only a prefix yields a vocabulary whose token identifiers are the first rows of the full vocabulary. This prefix nesting allows one language model to operate at several vocabulary sizes, use a control token to indicate the active size, and be deployed at any trained size by slicing its embedding and output head. We pre-registered five claims, including margins, seeds, contrasts, and a stop rule, and trained 30 models with 3.1M- and 10.6M-parameter bodies on 200M tokens each. Slicing is numerically exact: across 76 checks, a sliced model reproduces the restricted full model's logits bit for bit and removes 66% of deployed weights without changing latency. However, the shared model trails a fixed-cap specialist by 3.64% bits per byte at 32k against a 1% margin, and by 2.96% at 8k against a 2% margin. A 2x2 ablation separating the control token from output restriction finds that the token changes performance by +0.07% to +0.13%, with all intervals crossing zero, while output restriction costs +0.47% to +1.19%; the factors are substitutes rather than complements. Multi-cap training nevertheless improves robustness: under typographical noise, the same checkpoint degrades 12.5--15.4 points less in its fine mode and outperforms each fixed-cap specialist at that specialist's vocabulary size. A control with neither cap token nor output restriction is equally robust, attributing this benefit to multi-granularity training rather than conditioning. The per-cap penalty tracks each cap's share of training rows, yielding a falsifiable prediction for future work.

0.36

JET: Justification Evaluation in Transformer

cs.LG cs.PF ·2026-09-27 ·Shenghao Ding
code/data similarity 0.61
Abstract · 11 pages, 2 figures. Code: https://github.com/yet-another-ai/jet

JET uses pretrained language and vision-language models to select among a finite set of answers without additional training. It evaluates candidate likelihoods directly and shares computation across candidates. Experiments on desktop CPUs and consumer GPUs assess decision accuracy and execution cost. Qwen3.6-35B-A3B achieves 87.48% accuracy on the full MMLU test set and 3.69 requests per second on a separately timed MMLU subset. The accuracy-throughput comparison covers model, hardware, and reasoning choices, with Jev as an external reference. Controlled execution experiments show 2.18-2.23-fold speedups from prefix reuse and cache management, and a 30.8% reduction in process time from input preparation optimizations, with unchanged outputs. Optional reasoning has a task-dependent accuracy-throughput trade-off. These results support local decision inference from existing models.

0.42

Weight-Space Programming Doesn't Need Transformers

cs.LG cs.AIcs.CL ·2026-11-17 ·Hyunjong Ok, Jaeho Lee
code/datacommunity pick similarity 0.61
Abstract · Preprint (Work in progress)

Standard neural architectures such as the Transformer were chosen because they train well with gradient descent and run fast on GPUs. In weight-space programming, a large language model (LLM) writes target weights by hand without gradient-based training, so those reasons no longer apply. Should we keep the Transformer? Given minimal guidance, ten labeled examples, and a sandbox, mainly on multiple-choice questions, we task three frontier LLMs with either generating the weights of a fixed architecture or designing the architecture themselves. When free to design, all three compile plain-text facts into a sparse table queried by a fixed procedure, reaching up to 54.4% test accuracy. An LLM-designed model achieves higher test accuracy than the most accurate released Transformer that the same LLM wrote while using about 1,800x fewer parameters. Without gradients, they choose a table, in which the LLM can state what each weight means and can find and rewrite a wrong one. Each wrong answer points to one row, and removing a row changes about one other answer. From this, we propose an associative-memory-based model up to 17x faster on GPUs than a same-sized Transformer. We also test pretrained weights, other benchmarks, and tasks where models generate answers. Pretrained LLMs remain more accurate; the claim concerns which structure to build when writing weights.

0.64

TopK-Guided: Adaptive, Budget-Aware Activation Sparsity for Efficient LLM Inference

cs.AI ·2026-10-01 ·Mukund Agarwalla, Chih-Jen Lin
similarity 0.61
Abstract

Activation sparsity speeds up large language model (LLM) inference by setting unimportant activations to zero so that the corresponding computations can be skipped. Existing training-free methods, however, make different trade-offs: threshold-based methods such as TEAL adapt the sparsity level to each token but do not tightly control the realised sparsity, while TopK-based methods such as WINA enforce a fixed sparsity level but use the same sparsity budget for every token. Both also apply the same budget across transformer blocks, despite large differences in block sensitivity. We introduce TopK-Guided, a training-free method that addresses both limitations by combining bounded token-level sparsity adaptation with sensitivity-aware block-level budget allocation. Across Llama-2 and Llama-3 models, TopK-Guided consistently improves perplexity and downstream accuracy over TEAL and WINA while preserving essentially the same sparsitydependent projection compute as WINA, with the largest gains at high sparsity. Ablations show that both components provide complementary improvements.

0.41

NarrowSpec: Draft Hidden Width Need Not Match the Target in Speculative Decoding

cs.CL cs.LGcs.PF ·2026-11-18 ·Alagappan Valliappan, Ankit More, Dheevatsa Mudigere, Jatin Mitra
similarity 0.60
Abstract · 29 pages, 6 figures, 33 tables

Speculative decoding is widely used to speed up generation in large language models (LLMs), with a small draft model proposing tokens that one forward pass of the target model verifies. Draft models that read the target's hidden states, such as DFlash and EAGLE-3, typically inherit the target's hidden width. We show that the draft's whole residual stream can run at half or a quarter of that width while largely preserving acceptance. For DFlash, which borrows the target's vocabulary projection, the trained output adapter folds into it, giving one narrower projection with logits unchanged up to floating-point rounding. We test two drafter families, DFlash and EAGLE-3, on two targets, Qwen3-8B (NVFP4) and GPT-OSS-20B (MXFP4), in SGLang on a B200 and a DGX Spark (GB10). At batch size 1 and temperature 0, narrowing the draft to half or a quarter width speeds up end-to-end decoding by 1.06-1.12x on B200 and 1.13-1.44x on GB10. The speedup holds at larger batch sizes. From batch 32 to the largest batch each GPU fits, narrowing reaches up to 1.21x on both GPUs, and no narrow draft is slower than full width.

0.16

Breaking the Token Ceiling: Distilling Smaller, Stronger Byte Models

cs.CL cs.AIcs.LG ·2026-09-11 ·Kalyani Marathe, Artidoro Pagnoni, Tomasz Limisiewicz, Margaret Li, Mike Lewis +2 more
similarity 0.60
Abstract

Small models are made more capable through distillation from a larger one that shares their tokenization scheme. However, do distilled byte and token models behave similarly in terms of scaling trends as compute and data increases? To enable this comparison, we introduce two variants to efficiently convert token logits to Byte Logits: 1) approximate: Marginalize-It, and 2) exact: End-Of-Token. We then present the first large scale study of overtraining decoder-only dense transformer models varying two dimensions simultaneously: the tokenization scheme (Tokens, Bytes, Bytes w/ eot) and the training objective (Distillation vs. Cross-Entropy), sweeping layer-parameter-matched models with roughly 1 billion parameters up to 1 trillion bytes of data. Across eight benchmarks spanning three categories: Multiple Choice QA, Language Generation, and Machine Translation, we find that Token-1B models outperform byte models (End-Of-Token-1B and Bytes-1B) in the low-FLOP regime but eventually plateau; byte models start worse yet surpass Token-1B models with more compute, reaching a higher downstream task performance ceiling. Extrapolating the average top-1 error vs. validation BPB scaling laws predicts that, asymptotically, distilled End-Of-Token-1B outperforms distilled Token-1B by up to 4%. They are also far more data efficient, matching the performance of distilled Token-1B using only one-sixth of the training data. Moreover, by operating over a small vocabulary of 256 bytes instead of on the order of 100K tokens, they circumvent the need for top-k truncation during logit dumping, while also reducing logit storage costs to roughly one-fifth. Finally, our downstream performance scaling laws predict that our distilled End-Of-Token-1B models asymptotically surpass the Llama 3.2-1B, Gemma-3-1B-pt, and Gemma 2B models on averaged downstream tasks by up to 6.5%, 8.1%, and 2.1%, respectively.

0.45

Embeddings Are Overpriced? A Frozen 16 MB Vocabulary for Small and Ternary Language Models

cs.CL ·2026-10-15 ·Sai Kiran Bathula
code/data similarity 0.60
Abstract · 9 pages, 2 figures, 6 tables. Code, data, checkpoints and per-question results: https://huggingface.co/QLNI/embeddings-are-overpriced. Prepr…

In a small language model the vocabulary is the single largest part. In Gemma 3 270M the embedding table holds 168M of 268M parameters, and because quantisation methods leave the embedding in 16-bit, it is also most of the file once the rest of the model is compressed. We ask what that table actually buys. We replace it with one frozen table of 512-bit codes, 16 MB, with no trainable parameters, derived once from a pretrained embedding by principal-component projection and sign binarisation, and we train the same Gemma-shaped body from scratch on the same 2.05B tokens with and without it. The learned table buys 0.20 nats of validation loss for 2.6 times the trainable parameters, but on LAMBADA, HellaSwag and PIQA the frozen-table model is better or tied; only ARC-Easy favours the learned table. With a ternary BitNet b1.58 body the whole model is a 46 MB file, still ties the float model on LAMBADA and PIQA, and on a laptop CPU generates 615 to 740 tokens per second in 62 MB of memory, five to six times the speed of the float model's 8-bit GGUF in llama.cpp at a seventh of the memory. The frozen table wins by 1.7 to 2.3 nats on rare words, accepts 10,000 new words after training with a 3% cost where the learned table collapses by 43%, and all of it is released with the weights, the data and every evaluation answer.

0.50