CS Paper Radar

WRAP: Fixtureless Wrench-aware Multi-Robot Assembly Planning

Valentin N. Hartmann, Huang Su, Yijiang Huang, Stelian Coros

cs.RO ·submitted 2026-09-24 11:31 UTC · v1
benchmarkcode/data

Abstract

Assembly using robots often requires specially designed fixtures, or relies on top-down only assembly strategies. Using multiple robots, we can avoid using fixtures and make robotic assembly more flexible. Planning assembly sequences for multiple robots is challenging due to the high number of possible task assignments and orders. In addition, we need to reason over forces that occur during the assembly process, e.g., to decide if multiple robots are required for support, or if external support such as a table should be used. We present Wrap, a multi-robot assembly planner for multi-part assemblies, given the inter-part ordering-dependencies, the part meshes, and their initial state. We formulate a linear program to reason about valid grasps for supporting the forces that occur during assembly. The search leverages the assembly sequence, and greedily finds a feasible solution per assembly step by computing a heuristic via a cheap backwards search, and using the heuristic in the more expensive forward search. We then solve the multi-robot, multi-goal motion planning problem, and for execution, we split the plan into contact-rich assembly skills, and free space motion. We benchmark the planner on a variety of multi-part assemblies, and apply the planner to groups of robots differing in size and kinematics. We validate the work both in a physics simulation, and in real. Videos and code are available at https://www.vhartmann.com/wrap.

Comment
8 pages, 9 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

End-to-End Autonomous Generation of Human Assembly Plans

cs.RO cs.GR ·2026-10-07 ·Faustin Arion von Arx, Millicent Schlafly, Mark D. Fuge
code/data similarity 0.72
Abstract · 22 pages, 10 figures

Turning a CAD design into an assembly plan is still largely done by hand, requiring engineers to reason about geometric feasibility, tool access, stability, and the ergonomics of human assembly. In this work, we encode long-established design for assembly (DfA) principles into a contained, end-to-end approach for generating assembly plans. Our approach takes only a mesh assembly and produces either a step-by-step assembly manual or a structured failure report, requiring no joint metadata, fastener annotations, or additional information. Four major components of a manufacturing plan are addressed autonomously: an assembly tool list, the assembly sequence and subassemblies, an assembly manual, and design feedback for improving assemblability. For determining the sequence plan, we systematically disassemble the object in a physics simulator and apply a cost function that encodes DfA principles. Manual generation, tool labelling, and assembly feedback rely primarily on multimodal large language models. Compared with a baseline that always removes the outermost part first from Tian et al., DfA-aware sequence planning reduces simulated assembly time, measured with a robot-arm assembly-time proxy, by 35% on 136 assemblies of 5 to 30 parts. The correct tool is selected for 88.6% of assembly steps. A vision-language model judge compares the generated manuals against ablated variants, identifying which page elements carry the information a reader needs. The presented approach and open-source code are available for use by engineers or AI agents looking to rapidly accelerate the creation of manufacturing plans for a given product design.

0.39

Backward Layout Search for Sequence-Constrained Robotic Assembly

cs.RO ·2026-08-19 ·Xi Zhang, Jiancong Dai, Hao Chen, Zhengtao Hu, Changcai Yang +1 more
similarity 0.72
Abstract · Submit to ROBIO2026

Robotic assembly layout planning must determine the assembly site and the initial pose of each part while ensuring collision-free execution of a prescribed assembly sequence. This problem is challenging because the obstacle environment changes after each assembly step, and unassembled parts re maining in the workspace may block robot motions. We observe that the feasibility of each assembly step depends only on the initial poses of the current and later-assembled parts. Based on this dependency, we propose Backward Layout Search (BLS), which assigns initial part poses in reverse assembly order. Each expansion performs geometric, kinematic, grasp, and prescribed-motion checks, while collision masks and candidate set filtering remove infeasible initial part pose candidates. Promising partial layouts are retained through beam selection, and complete layouts are validated by full motion planning in forward assembly order. Experiments on five assembly models show that BLS produces collision-free executable layouts and reduces step evaluations and search time compared with a matched forward search.

0.31

MultiPush: Learning to Rearrange with Teams of Car-Like Pushers

cs.RO ·2026-09-22 ·Jeeho Ahn, Christoforos Mavrogiannis
similarity 0.69
Abstract

We focus on the problem of rearranging multiple objects within a constrained workspace via pushing using a team of car-like robots. While the use of multiple robots offers the potential for more efficient execution, the need for conflict resolution and the kinematic constraints arising from physics, robot design, and the workspace boundary make this problem especially challenging. Our key insight is that by exploiting the structure introduced by the car-like kinematics of the domain, we could relax the problem into an ordered assignment of Dubins curves to robots. To this end, we introduce MultiPush, a reinforcement-learning based framework that jointly determines an efficient schedule of pushing tasks and their allocation to available robots by leveraging a constraint-aware traversability graph. Across extensive simulated trials with up to 14 objects and teams of two to four robots, MultiPush reduces the makespan by up to 16% compared to the baselines while requiring up to 2.9 times faster planning time. We demonstrate MultiPush on a real-world scenario involving the rearrangement of 12 objects by two and three robots (1/10-scale racecars) in a constrained space.

0.28

Leveraging Inter-object Affordances for Efficient Planning in Contact-rich Tasks

cs.RO cs.AI ·2026-08-26 ·Pouya P. Niaz, Justus Piater, Alejandro Agostini
similarity 0.68
Abstract

Traditional task-and-motion planning (TAMP) approaches primarily focus on defining sequences of actions along with the necessary geometric and kinematic constraints to execute long-horizon tasks. However, their applicability in real-world settings is limited, as they typically assume simplified object models that overlook key physical properties critical for the successful execution of contact-rich tasks. Moreover, they often use sub-symbolic reasoning during motion planning, which drastically increases planning time and decreases overall success rates. We propose a method that leverages a TAMP approach, defining object-centric abstractions of execution constraints, called Unified TAMP (U-TAMP), to execute robotic tasks involving interactions among objects with heterogeneous shapes, sizes, and materials. Using a Vision-Language Model (VLM), we generate abstractions of inter-object affordances for characterizing physical interaction constraints between objects in contact-rich tasks, such as grasp and support constraints. These constraints are used to enrich the U-TAMP planning domain to deal with objects with variable physical properties. We perform experiments in simulated kitchen table organization scenarios and compare our results with those of the original U-TAMP, as well as a state-of-the-art VLM-based planner that leverages common sense knowledge of objects' affordances for plan generation. Our approach achieves significantly higher planning success rates and improves planning times by one to two orders of magnitude compared to other methods.

0.16

LABIT: Long-Horizon Robotic Assembly Benchmark for Industrial Tasks

cs.RO ·2026-10-12 ·Constantin Schempp, Christian Friedrich, Luca Kofler, Laura Suhm
benchmarkcode/data similarity 0.68
Abstract · This work has been submitted to an Elsevier journal for possible publication. Copyright may be transferred without notice, after which this …

Robot learning has undergone significant advancements in the domain of compliant control and robotic assembly. The development of novel methodologies has transcended the capacity to address discrete tasks, such as grasping or inserting, and has evolved to encompass the comprehensive construction of entire assemblies. Conventional benchmarks, which are predominantly focused on single tasks, are no longer adequate to address the complexity and interconnected nature of modern manufacturing processes. Consequently, the necessity for benchmarks to encompass a broader spectrum of assembly and subassembly steps is becoming apparent. In light of these developments, we propose LABIT, an industrial robotic assembly benchmark for long-horizon manipulation. This benchmark encompasses DIN-norm assembly tasks, including screwing, placing, inserting, and snapping, under both high and low tolerance conditions. The successive nature of these assembly steps implies that prior errors can influence subsequent manipulation. Consequently, this benchmark is particularly relevant for assessing the robustness of intelligent robotic systems. The proposed benchmarking protocols and novel performance metric, based on a taxonomy of assembly complexity in conjunction with the comprehensive list of parts and their corresponding CAD models, serve as essential tools for research and development in the field. To provide a baseline, we evaluate the benchmark using traditional force-position control and report reliability and score metrics per primitive, subtask, assembly category, and subassembly. Accompanying data is available at https://irp-hka.github.io/robotic-assembly-benchmark/.

0.48

cuArms: GPU-Accelerated Conflict-Based Planning for Multi-Arm Manipulation

cs.RO cs.AIcs.MA ·2026-10-26 ·Philip Huang, Fabio Ramos, Jiaoyang Li, Caelan Garrett, Lars Johannsmeier
similarity 0.68
Abstract · 8 pages, 8 figures

Multi-arm manipulation has the potential to dramatically improve the throughput, efficiency, and dexterity of many manipulation tasks. Recent work coordinates multiple robot arms in a shared workcell by allocating and scheduling tasks for greater parallelism, jointly planning multi-arm motions, or directly learning multi-arm policies. So far, these approaches are either too slow, rely on domain-specific assumptions, or scale poorly with the number of robots and task horizon. Thus, we introduce cuArms, a conflict-based planner co-designed with GPU parallelism that efficiently decomposes the search space using reusable multi-modal roadmaps for individual robots and resolves conflicts and deadlocks through a lazy search. To jointly optimize task assignment, schedules, motions, and manipulation skills, we integrate a high-level scheduler that proposes candidate skeletons for cuArms to ground into coordinated manipulation plans. Experimental results show that our method establishes a new state of the art, with real-time initial solutions and anytime improvements in both motion quality and scheduling, without days of domain-specific training required by learning approaches. Videos of both simulated and real-world industrial tasks are available on https://cuarms.github.io/.

0.24

It Takes Two to Tangram: Multi-Agent Object Centric Reinforcement Learning for Assembly

cs.RO ·2026-11-06 ·Paul Knaußt, Kay Pompetzki, Nico Bohlinger, Niklas Funk, Cristiana de Farias +2 more
code/data similarity 0.67
Abstract · This work has been submitted to the IEEE for possible publication

Geometric assembly requires fine spatiotemporal coordination to place parts without causing collisions or deadlocks under tight clearances. To address this, we present an object-centric reinforcement learning framework that treats each part as an agent and learns a shared policy for continuous assembly control. A graph neural network represents the pieces, their target poses, and their spatial relationships, and predicts translational and angular velocities for each component. Per-agent proximal policy optimization with a centralized graph critic directly learns motion and temporal coordination within a single feedback policy. We study this formulation through planar Tangram assembly, where pieces must slide and rotate into a given configuration while remaining on the assembly surface. Procedural generation of target configurations and randomized initial arrangements support training and evaluation across diverse assembly problems. Our experiments isolate the roles of relational structure and multi-agent optimization, and compare learned control with sampling-based planning. We demonstrate concurrent assembly in simulation and transfer the policy to sequential execution on a real robot, as our object-centric formulation decouples learned assembly coordination from low-level physical control. Project page: https://tangrambench.org/

0.25

CAD-Based Relation Learning and Geometric-Symbolic Planning for Robotic Assembly

cs.RO ·2026-09-15 ·Fabian Harlacher, Christian Friedrich
similarity 0.67
Abstract · This work has been submitted to Elsevier for possible publication. Copyright may be transferred without notice, after which this version may…

Assembly Sequence Planning (ASP) remains a challenging problem due to its combinatorial nature, making exhaustive planning approaches impractical for complex industrial assemblies. Furthermore, many CAD models lack reliable semantic contact information or require extensive manual preprocessing, limiting the applicability of existing methods. This paper presents a hybrid ASP framework combining learning-based relation extraction with geometric-symbolic reasoning to generate feasible robotic disassembly sequences from imperfect CAD data. A neural network predicts semantic geometric relations from point clouds, while human-in-the-loop verification enables correction of uncertain predictions and planning failures. Extracted relations are transformed into a symbolic assembly graph, enabling a geometric-symbolic planner to efficiently compute locally valid sets of robotic manipulation primitives. A visibility-based ray-casting strategy guides the search for feasible disassembly directions without requiring an exhaustive combinatorial search, while the local solution space enables efficient sequence optimization. The framework is evaluated on an introduced assembly dataset and on the ASAP test dataset. On the ASAP test dataset, the proposed planner achieves an 85.83% planning success rate while reducing the median planning time by more than one order of magnitude across all assembly sizes and by more than a factor of 50 for assemblies with more than 30 components compared to the baseline. The results demonstrate that the proposed hybrid framework enables efficient robotic assembly sequence planning from imperfect CAD data while substantially reducing planning time. By combining learning-based feature segmentation, human-in-the-loop verification, and geometric-symbolic reasoning, the framework provides a practical foundation for scalable and adaptable robotic assembly and disassembly planning.

0.18