CS Paper Radar

End-to-End Autonomous Generation of Human Assembly Plans

Faustin Arion von Arx, Millicent Schlafly, Mark D. Fuge

cs.RO cs.GR ·submitted 2026-10-07 10:01 UTC · v1
code/data

Abstract

Turning a CAD design into an assembly plan is still largely done by hand, requiring engineers to reason about geometric feasibility, tool access, stability, and the ergonomics of human assembly. In this work, we encode long-established design for assembly (DfA) principles into a contained, end-to-end approach for generating assembly plans. Our approach takes only a mesh assembly and produces either a step-by-step assembly manual or a structured failure report, requiring no joint metadata, fastener annotations, or additional information. Four major components of a manufacturing plan are addressed autonomously: an assembly tool list, the assembly sequence and subassemblies, an assembly manual, and design feedback for improving assemblability. For determining the sequence plan, we systematically disassemble the object in a physics simulator and apply a cost function that encodes DfA principles. Manual generation, tool labelling, and assembly feedback rely primarily on multimodal large language models. Compared with a baseline that always removes the outermost part first from Tian et al., DfA-aware sequence planning reduces simulated assembly time, measured with a robot-arm assembly-time proxy, by 35% on 136 assemblies of 5 to 30 parts. The correct tool is selected for 88.6% of assembly steps. A vision-language model judge compares the generated manuals against ablated variants, identifying which page elements carry the information a reader needs. The presented approach and open-source code are available for use by engineers or AI agents looking to rapidly accelerate the creation of manufacturing plans for a given product design.

Comment
22 pages, 10 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Automated Assembly Instruction Generation from CAD Models Using Grounded Large Language Models: A Human-in-the-Loop Framework

cs.LG ·2026-10-08 ·Aaron Dsouza, Mohammed Azeez Khan, Ashutosh Mishra, Arshaan Khan, Neha K. Nair +1 more
hot direction similarity 0.78
Abstract · Withdrawal requested as one of the co-authors did not consent to the publication of the manuscript

Assembly documentation is a downstream manufacturing artifact that is still usually authored by interpreting CAD models by hand. Structured product data and large language models are both available, yet studies of CAD interpretation, assembly sequence planning, instruction writing, and human oversight have largely proceeded separately. This paper formulates CAD-grounded assembly instruction generation: the production of natural-language assembly procedures constrained by structured engineering information extracted from CAD models. The proposed framework maps a STEP assembly to a typed ProductGraph intermediate representation, derives a precedence order by deterministic topological sorting, realizes each step as language conditioned only on selected graph context, attaches per-step visual documentation, and applies rule-based and model-assisted checks. PDF export remains disabled until a human reviewer resolves every quality flag. The case study establishes endto-end feasibility on a built-in six-part reference assembly: the pipeline preserves a reported assembly order and carries quantity, material, and torque into an exported manual page. Generalization and geometric validation remain open empirical questions. The contribution is an architecture that separates engineering state, deterministic reasoning, grounded language realization, verification, and human release.

0.21

WRAP: Fixtureless Wrench-aware Multi-Robot Assembly Planning

cs.RO ·2026-09-24 ·Valentin N. Hartmann, Huang Su, Yijiang Huang, Stelian Coros
benchmarkcode/data similarity 0.72
Abstract · 8 pages, 9 figures, 5 tables

Assembly using robots often requires specially designed fixtures, or relies on top-down only assembly strategies. Using multiple robots, we can avoid using fixtures and make robotic assembly more flexible. Planning assembly sequences for multiple robots is challenging due to the high number of possible task assignments and orders. In addition, we need to reason over forces that occur during the assembly process, e.g., to decide if multiple robots are required for support, or if external support such as a table should be used. We present Wrap, a multi-robot assembly planner for multi-part assemblies, given the inter-part ordering-dependencies, the part meshes, and their initial state. We formulate a linear program to reason about valid grasps for supporting the forces that occur during assembly. The search leverages the assembly sequence, and greedily finds a feasible solution per assembly step by computing a heuristic via a cheap backwards search, and using the heuristic in the more expensive forward search. We then solve the multi-robot, multi-goal motion planning problem, and for execution, we split the plan into contact-rich assembly skills, and free space motion. We benchmark the planner on a variety of multi-part assemblies, and apply the planner to groups of robots differing in size and kinematics. We validate the work both in a physics simulation, and in real. Videos and code are available at https://www.vhartmann.com/wrap.

0.33

IndustrialCAD-1400: Benchmarking Detailed Industrial Assemblies from Text

cs.AI ·2026-10-17 ·Hebao Zhu, Kang An, Zhuoke Liao, Faqiang Qian, Ziliang Wang +2 more
benchmark similarity 0.71
Abstract

Industrial assemblies require more than a recognizable shape: functional parts, interfaces, dimensions and service features must satisfy a detailed request together. We introduce IndustrialCAD-1400, a text-to-CAD benchmark for this industrial setting. Its 1,400 requests combine 400 equipment categories across 40 domains with 250 four-case design families. Family requests specify a median of 17 named component or configuration roles and six explicit numeric targets; controlled variants test whether dimensions change while shared structure is retained. Task construction draws on documented manufacturer information, owner specifications and engineering guidance. Models generate geometry programs from requests, and a common Blender environment executes them to produce scenes, optional measurements, and standardized views for evaluation. A request assessment of front, isometric, and top views measures visible component, arrangement, and interface fulfillment without requiring a single reference geometry. Five stratified panels preserve complete families while covering the benchmark exactly once, enabling balanced comparisons and separating industrial breadth from controlled numerical responsiveness. In conclusion, IndustrialCAD-1400 extends text-to-CAD from recognizable part geometry to industrial assembly synthesis under joint component, interface, spatial, and numerical specifications.

0.25

AssemblyWorld: Rethinking 3D Assembly with General-Purpose Agents

cs.CV cs.RO ·2026-09-30 ·Jiahao Zhang, Yeying Fan, Moitreya Chatterjee, Suhas Lohit, Bernhard Egger +3 more
code/data similarity 0.70
Abstract · 24 pages, 11 figures. Project page: https://assemblyworld.github.io

The task of 3D assembly requires translating an understanding of parts and their relationships into precise spatial arrangements. Can pretrained general-purpose agents assemble objects through visual interaction without additional assembly-specific fine-tuning? To investigate this question, we introduce AssemblyWorld, an interactive 3D environment in which agents inspect rendered views and manipulate supplied rigid parts, guided by images or assembly manuals when available. Agents perceive part geometry through 2D views rather than direct access to mesh vertices or faces, while their resulting assemblies are evaluated geometrically. Building on this environment, we construct AssemblyWorldBench, comprising 100 assembly tasks across 80 objects spanning furniture, industrial assembly, and fracture reassembly. Evaluating eight agent systems reveals substantial differences in their capabilities. The strongest system achieves 80.9% part accuracy but 59.4% complete-assembly success. The evaluated open-source systems lag substantially behind their stronger closed-source peers in both execution reliability and assembly accuracy. Analyses of visual references, interaction trajectories, and failures show how agents revise assemblies while leaving residual positioning errors. AssemblyWorld provides a common setting for both assessing the capabilities of interactive assembly agents and characterizing the gap between approximate structure recovery and precise reconstruction.

0.28

RealCADBench: Benchmarking Parametric CAD Modeling from Industrial Design Intents

cs.CV cs.CL ·2026-09-03 ·Guanlin Li, Zhichao Huang, Huimu Yu, Yichen Long, Hongsen Liu +6 more
benchmark similarity 0.70
Abstract

Parametric computer-aided design (CAD) modeling is difficult to evaluate with a single metric. Existing CAD benchmarks often emphasize synthetic or CAD-native settings, limited input modalities, or executability and IoUs alone. We introduce RealCADBench, a benchmark for intent-to-program CAD modeling from real industrial design intents. It contains 12,632 tasks from 19 factory-automation categories and spans text descriptions, 2D engineering drawings, real product pictures, and rendered images for both Part and Assembly modeling. We report results on a 1,770-task evaluation slice: 1,745 Part tasks across four input regimes and RCB-Assm25, a 25-task assembly study used in every reported assembly comparison. Each method generates FreeCAD API Python, which a shared runtime executes to export the 3D model. We evaluate the exported model using executability, Solid IoU, Surface IoU, and a rubric-based visual-semantic identity Judge. Among the nine standalone frontier large models evaluated, no model leads all four metrics. Across six frontier-scale large models, executability ranges from 0.565 to 0.812, Solid IoU from 0.2841 to 0.5379, and Surface IoU from 0.112 to 0.217 across the four Part regimes. The highest regime-balanced composite comes from a different model than the leaders on the four component metrics. On RCB-Assm25, Codex with GPT-5.5 improves executability and both IoU metrics over standalone GPT-5.5, but lowers the Judge score by 6.98 percentage points, leaving GPT-5.5 as the Judge leader. We also observe recurring failure modes, most notably missing fine structures, loss of part identity, and incorrect assembly placement. These results show that execution alone is insufficient to characterize realistic CAD modeling and that frontier models and agents differ substantially across executability, IoUs, and visual-semantic identity.

0.26

Automatic assembly modeling through attention-based assembly feature mate prediction and assembly feature pattern recognition

cs.CV cs.CEcs.GR ·2026-10-10 ·Ziheng Dai, Wanbin Pan, Zhihong Tang, Shuming Gao
datasethot direction similarity 0.70
Abstract · 28 pages, 12 figures, 5 tables

Assembly modeling plays an important role in constructing product models, yet it is still mainly performed via interactive operations that are experience-dependent and labor-intensive. Data-driven strategies hold promise for automating this process; however, existing approaches either predict poses that cannot directly generate editable B-Rep assembly constraints or require prescribed part pairs or predefined assembly faces. To reduce the large candidate space of constraint prediction without predefined assembly faces, we propose a data-driven framework based on assembly feature mate prediction. The framework performs automatic assembly modeling from unassembled B-Rep parts, using assembly features to group the geometric entities of local mating interfaces and restrict candidate formation. Given the lack of suitable assembly feature annotations in existing datasets, we construct a large-scale dataset through an automatic annotation pipeline. Using the annotated dataset, we train an attention-based network to predict assembly feature mates, with Engineering Compatibility Fusion (ECF) incorporating explicit engineering compatibility into learned matching scores. To improve the accuracy of automatic assembly modeling, we use assembly feature patterns (AFPs) to guide the matching process. Finally, a post-processing search selects assembly feature mate and AFP mate candidates, whose associated constraints are generated and solved to complete assembly modeling. Experimental results show that the framework achieves assembly constraint accuracies of 74.79% on the six-assembly comparison set and 64.09% on the extended test set of 16 assemblies, which includes the comparison set. With ground-truth face labels supplied as additional input, the corresponding accuracies increase to 81.78% and 80.93%, respectively.

0.31

LMBuild: Evaluating LLM Agents for Generating Buildable and Functional Structures

cs.AI ·2026-10-03 ·Jiateng Liu, Rushi Wang, Cheng Qian, Xuejun Zhang, Sun Li +7 more
benchmark similarity 0.70
Abstract · 64 pages

LLM-based agents are increasingly capable of generating complex 3D structures, with the potential to reshape how objects are designed and realized in the physical world. Yet, producing elegant geometry is fundamentally different from producing objects that can be built and perform their intended functions. Existing evaluations largely focus on geometric quality while overlooking physical realizability. We introduce LMBuild, a benchmark for evaluating LLM agents on generating buildable and functional structures. LMBuild represents generated objects as assembled structures comprising part decompositions, joints, materials, and sequences. To support reproducible evaluation, we provide a unified framework consisting of: (1) an interactive environment in which agents can use tools to retrieve, create, and place components to construct objects; (2) a curated benchmark that repurposes established CAD datasets and augments them with knowledge from Wikipedia; and (3) a evaluation framework covering structural soundness, functional affordance, design quality, and physical realization. Evaluations across 30 systems reveal several intriguing findings: (a) Soundness and alignment are no longer the primary bottlenecks for frontier closed-source models, while functional affordance and physical operability remain substantially more challenging; (b) stronger models more effectively create new components, whereas weaker models tend to rely on retrieval; and (c) providing functional specifications substantially improves part completeness, kinematics, and physical operability. These results show that generating real-world structures requires deeper reasoning about functional affordances, mechanics, and designing and creating novel components. We expect LMBuild to provide a foundation for measuring progress and incentivizing research toward agents that generate buildable and functional structures.

0.20

Can It Actually Work? Synthesizing Functional CAD Mechanisms

cs.CV cs.CLcs.GR ·2026-10-19 ·Wenqian Zhang, Yangyi Huang, Zigeng Xu, Weiyang Liu, Zhen Liu
benchmarkcode/data similarity 0.70
Abstract · 45 pages, 16 figures, project page: https://thegenlab.ai/funcad/

While LLM agents can generate visually plausible CAD assemblies, these designs often fail to fulfill their intended physical functions. We study functional CAD design, a setting where agents interpret underspecified requests to construct and iteratively revise mechanisms that satisfy functional requirements in physical simulation. Verifying these requirements is nontrivial: different candidate mechanisms may realize the same function through entirely different components, controls, and operating sequences. To bridge this gap, we propose FunCAD-Harness, a framework that translates abstract requirements into candidate-specific physical tests and uses simulation feedback to guide design revisions. To systematically evaluate this capability, we introduce FunCADBench, a benchmark spanning 46 mechanism families with interdependent and multi-step operations. Experiments across frontier LLM agents show that FunCAD-Harness exposes subtle mechanical failures invisible to visual inspection, substantially improving functional success rates over standard simulation-augmented baselines. Ultimately, our work marks a step toward CAD agents capable of translating human intent into working mechanisms.

0.40