CS Paper Radar

Spaceborne differential photogrammetry for control-free measurement of large-gradient deformation with structural immunity and a predictable accuracy envelope

Yueqiang Zhang, Chang Ma, Shuixin Pan, Haibo Liu

cs.CV ·submitted 2026-08-26 03:40 UTC · v1

Abstract

Optical satellite image correlation measures wide-area deformation in regimes where coherent interferometric synthetic aperture radar fails because displacement gradients are too large. However, standard pairwise workflows lack a pre-acquisition error budget and rely on extensive stable terrain. We formulate repeat-pass optical correlation as a differential estimation problem without surveyed ground control. Nominal georeferencing defines the coordinate frame, stable-area constraints and displacement priors resolve the datum, and surface displacement is estimated jointly with inter-epoch revisit-bias coefficients. The model yields a predictive accuracy envelope and calibrated per-point posterior uncertainty, bounds along-track uncertainty through a displacement prior, and represents pushbroom jitter using per-line revisit offsets. Simulations and Sentinel-2 and WorldView-2 experiments on the 2019 Ridgecrest earthquake, the 2023 Kahramanmaraş earthquake, and the Baltoro glacier validate the predicted noise floor, control-free accuracy margin, and leakage caused by view-angle and digital elevation model errors. The measured noise floor reaches approximately $0.05$ pixel at $10$,m ground sampling distance. With only five stable tiles, conventional destriping changes the estimated Baltoro trunk velocity from $106$ to $1251$myr$^{-1}$, whereas the prior-constrained estimate remains $87$myr$^{-1}$. Closure analysis attributes approximately $88\%$ of pair-error variance to individual scenes, consistent with $25{,}354$ ITS_LIVE glacier-velocity triplets. Three matching methods lead to the same conclusions. The framework therefore turns pairwise correlation into a robust measurement with a predictive error budget, reduced dependence on stable terrain, and conclusions independent of the matching method.

Comment
39 pages, 9 figures, and 5 tables; supplementary material: 10 pages, 3 figures, and 6 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Self-Calibrating Dense Displacement Fields for Reliable Co-Registration of Large Optical Satellite Imagery

cs.CV ·2026-08-23 ·Shoukun Sun, Zhe Wang, Sanaz Salati, Jiyin Zhang, Hui Wang +1 more
similarity 0.59
Abstract

Co-registration underlies nearly every multi-temporal and multi-sensor use of optical satellite imagery, and operational products still carry documented offsets well above the fraction-of-a-pixel scale at which change detection, time series, and data fusion degrade. Real image pairs differ along several axes at once (sensor response, scene content, viewing geometry, resolution, mosaic seams), and the last of these is not a single global motion. Existing tools embed a motion model and constants tuned to their development data; a pair that fits is registered precisely, while one that does not either fails to match or returns a result wrong by tens of pixels with no failure reported. Learned matchers add a GPU requirement and carry no accuracy guarantee outside their training distribution. We present SCDF (self-calibrating displacement fields), a training-free, GPU-free estimator whose motion model is the dense per-pixel displacement field itself, so no scene motion falls outside the model. A single predict--measure--filter loop runs over a resolution pyramid: the accumulated field predicts where each patch of the moving image falls in the reference, RootSIFT matching and a correlation pass measure the displacement there to sub-pixel precision, and filters whose thresholds are all calibrated on the image pair itself decide what survives. One configuration, with no per-dataset tuning, processes full $8192^2$ scenes on a single CPU core. On 584 constructed-ground-truth pairs built from real Sentinel-2, Landsat-8/9, and NAIP imagery, against seven classical baselines and two zero-shot pretrained matchers, SCDF registers every pair with zero failures, reduces the best baseline's real-pair median end-point error from 6.83 to 4.17m, and cuts its 90th percentile from 17.8 to 7.77m.

0.23

GeoRay: Gauge-Aware Feed-Forward Satellite 3D Reconstruction in the Geodetic Frame

cs.CV ·2026-08-30 ·Zhe Dong, Wanqing Wu, Yuzhe Sun, Haochen Jiang, Yuchen Ma +3 more
benchmarkcode/data similarity 0.58
Abstract

Feed-forward 3D foundation models reconstruct perspective scenes in one pass. Satellite photogrammetry needs a different product, one that domain adaptation alone does not deliver: dense surface height in an absolute geodetic frame under non-central rational polynomial cameras (RPCs). Perspective-pretrained features are not reliably observable along RPC height rays, absolute elevation carries a low-order height--datum gauge exchangeable with sensor bias to first order, and monocular and multi-view cues fail in different regions. \method{} treats all three. Lightweight ray-consistent adapters make a frozen backbone matchable along native RPC rays. An explicit datum mechanism separates relief from absolute level and is equivariant to the vertical origin by construction, so one trained model serves zero-, one-, and sparse-control inference. Calibrated inverse-variance fusion combines the two relief streams. \bench{}, our absolute-frame benchmark of eighteen systems across in-domain, cross-dataset, and cross-city tiers, scores absolute placement without registration or test-reference leakage. On 26 held-out US3D tiles, \method{} attains $2.99$\,m absolute MAE at $91.9\%$ coverage, improves completeness-aware accuracy by $46.4$ points over the strongest compliant feed-forward baseline, remains the most accurate such system under both transfer shifts, and runs in $24$\,s model-forward time per tile. Code and models will be released at https://github.com/HIT-SIRS/GeoRay

0.41

GeoPhysAdapter: Scale-Matched Geophysical Adaptation for Cross-Domain Landslide Mapping with Vision Foundation Models

cs.AI cs.CV ·2026-08-10 ·Zhihang Liu, Mei-Po Kwan, Jinlin Wu, Hao Li
publishedcode/data similarity 0.55
Abstract

Newly triggered landslides rarely carry immediate annotations, so cross-domain transferability determines the value of landslide mapping for emergency response and regional risk assessment. Vision foundation models have strengthened representational transfer, yet on unseen regions, events, and data sources they still generate high-confidence false alarms. Terrain, material, and rainfall triggering can constrain such errors, but their supports are local, regional, and event-scale, so that resampling onto a 10~m grid misaligns them with the segmentation decision unit and compounds the uncertain geographic context problem (UGCoP). We propose GeoPhysAdapter, which anchors on a frozen vision foundation model, restricts terrain, material, and triggering to dense spatial guidance, regional modulation, and event-timing forcing, and applies bounded adaptation at two decision units, the pixel and the candidate landslide body, reverting exactly to the visual prediction where support is insufficient. On an event-isolated PILD dataset of four public sources, 55 global landslide events, and 7,890 test samples, 70.3% of cross-domain false-positive mass lies in near-pure spurious bodies of median equivalent diameter 207m, matching coarse-prior support rather than the pixel. Pixel-level adaptation removes a net 507,817 erroneous pixels and reduces error by 7.76%, whereas raising the decision unit to the candidate body, under identical samples, anchor, and baseline, increases error reduction to 23.99%, approximately 3.1 times the pixel-level effect, improves IoU by 0.031 (14.2% relative), and corrects 9.92 pixels per pixel harmed. The data and code are publicly available at: https://github.com/Liu-Zhihang/geophysadapter.

0.41

A Probabilistic-Cost Algorithm for Large-Scale 2D Phase Unwrapping

eess.SP ·2026-09-28 ·Scott Staniewicz, Geoffrey Gunter, Sara Mirzaee, Marin Govorcin, Talib Oliver-Cabrera +1 more
code/data similarity 0.55
Abstract

Two-dimensional phase unwrapping can dominate computation and memory usage in wide-area Interferometric Synthetic Aperture Radar (InSAR) processing. Here we present Whirlwind, a minimum-cost-flow (MCF) unwrapper tailored for large interferograms of surface deformation. We derive fixed likelihood-ratio costs using multilook interferometric phase statistics, marginalizing uncertainty in the local phase-gradient and coherence estimates. A compact integer lookup table and parallel-augmenting successive-shortest-path solver with Dial bucket queues make the MCF solve efficient while avoiding flow-dependent cost relinearization. We test whether these improvements in speed and memory can be obtained without a loss of solution quality using multiple evaluation criteria for individual interferograms, at mission-production scale, and in end-to-end displacement time series solutions. On a 74-Mpixel Sentinel-1 interferogram of the 2019 Ridgecrest earthquakes, Whirlwind runs in 209 s, 28x faster than single-tile SNAPHU, while using 40% of the peak memory. Across 6,014 provisional NISAR geocoded unwrapped (GUNW) products, 93% agreed with the SNAPHU-derived results on more than 99% of valid pixels; on seven challenging 77-MHz Antarctic frames, Whirlwind ran a median 21x faster than SNAPHU while matching 99.4% of its integer-cycle assignments. Finally, in a complete Sentinel-1 time series experiment, Whirlwind improved the network-inversion consistency over SNAPHU, and in a high-resolution Capella time series of the Portuguese Bend landslide, it achieved the highest correlation with a dense GPS network among five unwrapping configurations. Whirlwind is provided as an open-source library capable of handling the growing volume of globally available InSAR data.

0.33

SyntheIce: A Synthetic Radargram Annotation Benchmark for Englacial Layer Reconstruction

cs.CV ·2026-11-10 ·Muhammad Behroze Hassan, Bayu Adhi Tama, Sanjay Purushotham, Vandana P. Janeja
publishedbenchmark similarity 0.54
Abstract · 10 pages, 10 figures, 3 Tables, accepted in IEEE International Conference on Big Data (BigData) 2026

Englacial layers in radio-echo-sounding radargrams (subsurface ice images) encode the climate and flow history of ice sheets and glaciers. However, large-scale extraction is hindered by time-consuming manual annotation and semi-automated detectors that produce fragmented rather than continuous horizons. We address two challenges: reconstructing complete layers from partial detections across radargram profiles and validating layer continuity across adjacent tile boundaries. We introduce a slope-aware greedy fragment-linking algorithm that reconstructs full-width layers using row-similarity gating and an exponentially weighted moving average (EWMA) slope predictor. Each reconstruction receives a content-based hash ID for stable cross-radargram identification. For quantitative evaluation, we generate SyntheIce, a synthetic dataset of 600 radargrams spanning multiple complexity levels and realistic noise conditions, including 150 wide radargrams divided into four adjacent tiles. All samples include exact ground-truth annotations. We evaluate the dataset using XCheck, a consistency-based validation framework, extending its original two-image setting to four consecutive tiles and enforcing continuity at every boundary. This demonstrates the dataset's utility for developing and evaluating real-world annotation algorithms. Our findings extend beyond ice science: when spatial features are fragmented but retain consistent local geometry, trajectory-based linking is more reliable than appearance-based matching. Evaluation against expert-labeled real radargrams demonstrates high precision, recall, F1-score, and mean IoU, supporting the method's transfer to real-world data.

0.30

Observation Quality in DSM-Assisted Aerial Localization: A Benchmark and Base-Anchored Uncertainty Calibration

cs.CV ·2026-10-13 ·Pengyu Yin, Jie Pan, Junxiang Tan, Mengqi Fu, Kun Cheng +1 more
benchmark similarity 0.53
Abstract · 15 pages, 7 figures, 7 tables. Submitted to IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing

Aerial map matching provides position observations for navigation, but a position error alone does not determine how an observation should be weighted. We define five benchmark tasks: position availability and agreement, grouped error structure, predictive uncertainty, controlled updates, and temporal accumulation. We use digital-surface-model-assisted localization to test whether base-anchored uncertainty calibration improves the weighting of unchanged position estimates. The method combines propagated image and map sensitivities with the second moment of a compact configuration subset relative to the reported position. Scale is fitted using separate position references without local surface-height ground truth. Thirteen covariance models are evaluated on two held-out query sets from locations represented in the calibration data. Using reference residuals, we compare the method with a constant full-matrix baseline. With all localization failures included, the method reduces the normalized position-update risk, averaged equally across locations, by 7.70% on 728 conditions and 5.46% on a separate 142 conditions under an independent prior. On the primary set, the equal-location average negative log likelihood on reference residuals improves by 2.571 nat. At these seen locations, exploratory base-only quality calibration and conditional-addition controls leave the incremental update benefit of configuration disagreement unresolved. Navigation benefit and real temporal accumulation remain untested.

0.23

FiLM-GPNet: Geometry-Aware Pseudo-Supervised Phase Restoration with Zero-Shot Generalization for Large Temporal InSAR Stacks

cs.CV cs.LG ·2026-08-29 ·Getnet Demil, Muhammad Farhan Humayun, Tomi Westerlund, Jukka Heikkonen, Mourad Oussalah
published similarity 0.53
Abstract · Its IEEE Geoscience And Remote Sensing Symposium (IGARSS) 2026 Data Fusion Contest Winner Paper. reference https://www.grss-ieee.org/communi…

The growing availability of dense commercial Synthetic Aperture Radar (SAR) time series enables temporal Interferometric SAR (InSAR) analysis, but fixed classical filters fail under heterogeneous acquisition geometries, degrading phase quality and temporal consistency. We propose FiLM-GPNet, a geometry-conditioned network for wrapped-phase restoration that explicitly adapts to acquisition differences using Feature-wise Linear Modulation (FiLM) and a 7D per-pair geometry descriptor. The model is trained with pseudo-supervision from Goldstein-filtered interferograms and regularized by interferometric physics via triplet-closure consistency, while also estimating per-pixel aleatoric uncertainty. Experiments on three Capella Spotlight stacks from the IEEE GRSS 2026 Data Fusion Contest show that FiLM-GPNet reduces temporal residual by 68% (Hawaii) and 66% (Western Australia) relative to the Goldstein baseline, alongside closure error reductions of 10% and 13%, respectively. In Western Australia, it further improves unwrapping success rate by 7.7 percentage points and Digital Elevation Model (DEM) Normalized Median Absolute Deviation (NMAD) by 31%. The model also shows strong zero-shot generalization to a geographically and geometrically distinct third stack (Los Angeles) without retraining, supporting geometry-conditioned restoration as an effective alternative to fixed classical filtering across heterogeneous stacks.

0.29

MiCaDe: Online LiDAR-Camera Miscalibration Change Detection for Autonomous Driving

cs.CV cs.LG ·2026-11-03 ·Carlo Sgaravatti, Riccardo Pieroni, Matteo Corno, Sergio M. Savaresi, Luca Magri +1 more
code/datahot direction similarity 0.53
Abstract

Reliable multi-sensor perception in autonomous vehicles requires accurate calibration between cameras and LiDAR. However, calibration drift is often unavoidable in long-term deployments: vibrations, thermal effects, and minor mechanical shocks may alter the relative pose between sensors, leading to systematic errors in downstream fusion tasks. We propose MiCaDe (Miscalibration Change Detection), an online solution detecting when the extrinsic LiDAR-camera calibration parameters are no longer accurate by means of sequential change detection. MiCaDe requires no calibration targets, or modification of the perception stack, providing low false-alarm rates with negligible computational overhead. Our key insight is that 3D and 2D bounding boxes produced by standard object detectors should remain geometrically consistent under correct calibration. By matching cross-modal detections, we derive geometric consistency metrics that serve as sensitive indicators of extrinsic drift. These metrics are aggregated into fixed-size batches and scored against a reference distribution, producing a likelihood stream that is monitored by a Change Point Model (CPM). Crucially, the CPM accumulates statistical evidence over time, enabling detection of subtle drifts that would otherwise go unnoticed. Experiments on multiple long-sequence datasets and on a real-world dataset with physically induced miscalibration confirm reliable detection under diverse conditions. Code available at: https://github.com/CarloSgaravatti/MiCaDe.

0.35