CS Paper Radar

Self-Calibrating Dense Displacement Fields for Reliable Co-Registration of Large Optical Satellite Imagery

Shoukun Sun, Zhe Wang, Sanaz Salati, Jiyin Zhang, Hui Wang, Xiaogang Ma

cs.CV ·submitted 2026-08-23 08:50 UTC · v1

Abstract

Co-registration underlies nearly every multi-temporal and multi-sensor use of optical satellite imagery, and operational products still carry documented offsets well above the fraction-of-a-pixel scale at which change detection, time series, and data fusion degrade. Real image pairs differ along several axes at once (sensor response, scene content, viewing geometry, resolution, mosaic seams), and the last of these is not a single global motion. Existing tools embed a motion model and constants tuned to their development data; a pair that fits is registered precisely, while one that does not either fails to match or returns a result wrong by tens of pixels with no failure reported. Learned matchers add a GPU requirement and carry no accuracy guarantee outside their training distribution. We present SCDF (self-calibrating displacement fields), a training-free, GPU-free estimator whose motion model is the dense per-pixel displacement field itself, so no scene motion falls outside the model. A single predict--measure--filter loop runs over a resolution pyramid: the accumulated field predicts where each patch of the moving image falls in the reference, RootSIFT matching and a correlation pass measure the displacement there to sub-pixel precision, and filters whose thresholds are all calibrated on the image pair itself decide what survives. One configuration, with no per-dataset tuning, processes full $8192^2$ scenes on a single CPU core. On 584 constructed-ground-truth pairs built from real Sentinel-2, Landsat-8/9, and NAIP imagery, against seven classical baselines and two zero-shot pretrained matchers, SCDF registers every pair with zero failures, reduces the best baseline's real-pair median end-point error from 6.83 to 4.17m, and cuts its 90th percentile from 17.8 to 7.77m.

Closest papers

Nearest neighbours by meaning across the whole index.

DAPEVO: Deep Adaptive Patch Frame-Event Visual Odometry

cs.CV ·2026-09-25 ·Luca Gandolfi, Simone Nascivera, Roberto Pellerito, Rong Zou, Chiara Plizzari +1 more
similarity 0.65
Abstract

Visual odometry is essential for autonomous navigation in GPS-denied environments, yet RGB-based methods remain vulnerable to motion blur, challenging illumination, and dropped frames. Event cameras complement conventional cameras with high temporal resolution and dynamic range, but their asynchronous measurements complicate reliable correspondence estimation. We present DAPEVO, a learned visual odometry system that estimates image and event correspondences independently at shared patch locations and fuses their correlation evidence before motion refinement. Each tracked patch maintains image and event descriptors, and a learned scalar gate combines modality-specific correlation embeddings for each patch--frame edge before a shared recurrent refinement and bundle-adjustment update. DAPEVO also supports event-only observations, enabling continued tracking when RGB frames are sparse or unavailable, while modality-aware keyframe culling preserves scarce frame constraints. On UZH-FPV, when retaining only one in six RGB frames, DAPEVO's mean absolute trajectory error (ATE) increases by only 36%, from 1.00 to 1.36m, whereas the ATE of DPVO and RAMP-VO rises by factors of $3.7\times$ and $3.1\times$, respectively. On TartanEvent, DAPEVO similarly remains below 1m ATE at 3Hz RGB input, while DPVO and RAMP-VO exceed 9m. Under degraded RGB input on TartanEvent, DAPEVO achieves an ATE of 0.60m, compared with more than 4m for both DPVO and RAMP-VO, while also outperforming event-only DEVO at 0.87m.

0.16

SkyAnchor: Updating Metric-scale Aerial 3D Gaussian Scenes from Unposed Ground-View Sequences

cs.CV cs.GR ·2026-09-12 ·Zhuoxiao Li, Xinyi Liu, Taoyu Wu, Yinrui Ren, Tongyan Hua +6 more
top venue similarity 0.65
Abstract

We study how to update a pre-built aerial scene with a newly captured, unposed ground-view sequence. The aerial scene already contains a reliable metric Structure-from-Motion (SfM) reconstruction and a pre-trained 3D Gaussian Splatting (3DGS) model, whereas the ground-view sequence is collected later to add street-level appearance but has unknown camera poses and global scale. Registering this sequence to the aerial SfM reconstruction is challenging because single-image cross-view localization is brittle and long trajectories are prone to drift. To address these challenges, we present SkyAnchor, which treats the existing aerial scene as a fixed scaffold for ground-view registration and scene update instead of jointly reconstructing aerial and ground imagery from scratch. It first localizes short groups of consecutive ground frames against geometrically verified aerial support, producing sparse anchor poses. It then recovers the full ground trajectory with anchor-constrained submaps, fixing the front and rear anchor poses during incremental registration and bundle adjustment. Finally, it inserts filtered ground Gaussians while preserving the aerial view, followed by lightweight joint refinement. Experiments on seven real aerial--ground scenes show accurate metric ground trajectories and updated 3D Gaussian scenes with strong aerial- and ground-view rendering quality.

0.34

AdaPixFlow: Learning Continuous-Time 3D Dynamics Across Scenes from Sparse Multi-view Observations

cs.CV ·2026-11-19 ·Hrishikesh Viswanath, Aniket Bera
similarity 0.65
Abstract

Understanding how objects move in dynamic scenes requires recovering their 3D motion from visual observations and predicting their positions at unobserved times. Existing methods either optimize scene-specific velocity fields or impose predefined physical and kinematic assumptions. We instead study learning a continuous-time dynamics operator across scenes, mapping multi-view visual observations to 3D object kinematics. We introduce Adaptive Pixel Flows (\ours{}), which learns this operator from multi-view RGB-D observations without per-scene optimization or predefined motion models. The method fuses observations from all cameras into a shared voxel grid in world coordinates, from which the network predicts a continuous-time velocity field. Because the operator is trained across scenes, it learns motion priors that carry over to unseen scenes. The field can then be integrated from observed states to predict object positions between observations and beyond the observed sequence. On held-out PhysInOne scenes, \ours{} improves F1 over the strongest competing method by 2.5\% for in-between prediction and 15\% for future prediction. Compared with per-scene velocity-field methods, the improvements are 30\% and 85\%, respectively. Applied zero-shot to Spring-Gaus, it improves future-prediction F1 by 12\%.

0.20

Residual Motion Splatting for Continuous Space-Time Video Super-Resolution

cs.CV ·2026-10-28 ·Vincent Herfeld, Eva Coupet{é}, Julien Mairal, Jean Ponce
similarity 0.64
Abstract

Continuous space-time video super-resolution produces a high-resolution, highframe-rate video from a low-resolution, low-frame-rate one at arbitrary spatial scales and temporal instants. Classical spatial multi-frame super-resolution has shown that detail beyond a single frame's sampling limit can be recovered by aligning complementary observations with sub-pixel precision and accumulating them on a finer grid. Existing learning-based methods largely depart from this principle: some align and fuse frames only at low resolution before regressing a continuous high-resolution representation, while others interpolate each frame to the output resolution before splatting. In both cases, the per-frame samples are resampled before fusion, so their sub-pixel positions are lost before frames are combined. Restoring this principle in a learned continuous model raises two challenges: estimating sub-pixel motion at unobserved times, and handling holes and occlusions when splatting a coarse grid onto a finer one. We address the first by predicting per-pixel continuous trajectories that refine linear optical-flow paths with smooth residual motion, using features integrated over the full video sequence. We address the second by directly splatting consecutive low-resolution features in a learned latent space onto a high-resolution grid at their predicted sub-pixel positions with predicted visibility weights, before a decoder resolves remaining ambiguities. This makes temporal interpolation and multi-frame superresolution a single operation. Our method improves both reconstruction fidelity and perceptual quality on multiple standard benchmarks over the state of the art, while running up to an order of magnitude faster.

0.20

Dense Flow from Adaptive Correspondence

cs.CV ·2026-11-09 ·Cheng-Lin Hsieh, Stella X. Yu
top venue similarity 0.64
Abstract · 18 pages, 6 figures. Accepted at NeurIPS 2026

Optical flow requires reliable matching from sufficient visual context and precise motion at every pixel. Existing methods such as WAFT match and estimate flow on the same coarse grids, then recover dense flow through learned upsampling, without explicitly linking visual support for matching to dense flow reconstruction. Our key insight is that dense pixel-level flow does not require equally dense matching. We decouple correspondence scale from flow resolution by adapting the size and shape of spatial supports to image structure for reliable matching, while reusing these supports for precise dense flow reconstruction. We realize this in Flow from Adaptive Token Estimation (FATE), whose token supports expand within coherent regions and contract near motion boundaries. Shared pixel-to-token associations pool features for matching and reconstruct pixel flow from token motions. Flow supervision jointly trains pixel grouping, token matching, and flow estimation without grouping labels, allowing FATE to anticipate which pixels are likely to move together from appearance alone. Trained on FlyingChairs/FlyingThings3D, FATE achieves the highest zero-shot accuracy on Sintel Final and KITTI, a critical setting given scarce real-world flow labels. For visible pixels, FATE improves accuracy within coherent regions, and more near motion boundaries. Its largest gains occur where direct matches are unavailable: Occluded or out-of-frame pixels account for roughly 10% of valid pixels but 50% of WAFT's total error. Experiments show that adaptive correspondence through pixel-to-token grouping enables reliable matching and precise pixel-level flow, improving generalization to unseen real scenes.

0.34

ReFineR: Single image to dense point cloud registration at pixel level with point splatting

cs.CV ·2026-11-12 ·Ugo Insalaco, Jean-Emmanuel Deschaud, Pierre Dellenbach
top venuecode/data similarity 0.62
Abstract

Cameras and LiDARs (Light Detection and Ranging) provide complementary observations of the same scene: cameras capture rich appearance cues while LiDAR sensors provide accurate geometric measurements. In this work, we address the problem of fine image-to-point cloud registration from a single image and a roughly estimated camera pose. On robotic platforms, residual reprojection errors of several pixels are commonly observed even after calibration due to temporal desynchronization, mechanical vibrations, or inaccuracies in point cloud reconstruction. Such errors can lead to decimeter-level geometric discrepancies at moderate distances and significantly affect multiple downstream tasks, such as dense cross-modal supervision, texture mapping, and semantic label transfer. To address this challenge, we introduce ReFineR: an offline framework to finely register individual images to pre-reconstructed point clouds. ReFineR builds upon differentiable point splatting rasterization and a smooth Gradient Orientation Measure (GOM) to iteratively refine the camera pose through analysis-by-synthesis optimization. We evaluated the method on a curated dataset of manually calibrated images collected from heterogeneous data sources. Furthermore, we show that an automatic point cloud rescale factor can be estimated prior to optimization, enabling robust refinement across a wide range of scenarios using a single scale-invariant formulation. The project page can be found at https://refiner-project.github.io/

0.38

MIRAGE: Metric Inference and Reliability-Aware Gaussian Estimation from Feed-Forward Vision

cs.CV ·2026-10-08 ·Xinzhe Wang, Changjian Jiang, Kaiwen Song, Xudong Li, Kerui Ren +6 more
benchmarkcode/data similarity 0.61
Abstract · Project Page: https://hiroxzwang.github.io/publications/mirage/

Feed-forward 3D priors enable high-quality reconstruction from image streams but often lack reliable metric scale and suffer from long-term trajectory drift. In contrast, LiDAR--inertial estimation provides metrically accurate motion but lacks the image-space consistency needed for high-fidelity reconstruction. We propose $MIRAGE$, which anchors feed-forward visual geometry to LiDAR--IMU metric motion and regulates online pose corrections according to correspondence support and cross-modal agreement, jointly enabling accurate metric pose estimation and high-fidelity Gaussian reconstruction. Experiments on Oxford Spires, M2DGR and INS show that MIRAGE achieves accurate metric trajectory estimation, outperforming COLMAP, a widely used but computationally expensive reference for vision-only benchmarks. Motivated by the scarcity of long-horizon monocular benchmarks for large-scale indoor reconstruction, we further build a multimodal data-collection platform and use MIRAGE to establish accurate 6-DoF reference trajectories for a new vision-only benchmark. We benchmark recent monocular large-scale reconstruction methods on this dataset, providing a systematic evaluation of their performance in long-horizon indoor scenes.

0.24

MiCaDe: Online LiDAR-Camera Miscalibration Change Detection for Autonomous Driving

cs.CV cs.LG ·2026-11-03 ·Carlo Sgaravatti, Riccardo Pieroni, Matteo Corno, Sergio M. Savaresi, Luca Magri +1 more
code/datahot direction similarity 0.61
Abstract

Reliable multi-sensor perception in autonomous vehicles requires accurate calibration between cameras and LiDAR. However, calibration drift is often unavoidable in long-term deployments: vibrations, thermal effects, and minor mechanical shocks may alter the relative pose between sensors, leading to systematic errors in downstream fusion tasks. We propose MiCaDe (Miscalibration Change Detection), an online solution detecting when the extrinsic LiDAR-camera calibration parameters are no longer accurate by means of sequential change detection. MiCaDe requires no calibration targets, or modification of the perception stack, providing low false-alarm rates with negligible computational overhead. Our key insight is that 3D and 2D bounding boxes produced by standard object detectors should remain geometrically consistent under correct calibration. By matching cross-modal detections, we derive geometric consistency metrics that serve as sensitive indicators of extrinsic drift. These metrics are aggregated into fixed-size batches and scored against a reference distribution, producing a likelihood stream that is monitored by a Change Point Model (CPM). Crucially, the CPM accumulates statistical evidence over time, enabling detection of subtle drifts that would otherwise go unnoticed. Experiments on multiple long-sequence datasets and on a real-world dataset with physically induced miscalibration confirm reliable detection under diverse conditions. Code available at: https://github.com/CarloSgaravatti/MiCaDe.

0.35