CS Paper Radar

Structured Pose-Conditioned Flow Matching for Generative 5G CSI Augmentation

Haojin Li, Anbang Zhang, Wai Ho Mow, Chenyuan Feng, Chen Sun, Haijun Zhang

eess.SP cs.AI ·submitted 2026-09-24 14:52 UTC · v1

Abstract

With the growing demand for privacy-preserving and occlusion-resilient human pose recognition (HPR), 5G channel state information (CSI) offers a promising contactless sensing modality by integrating communication and sensing capabilities. However, collecting large-scale synchronized CSI-pose pairs remains costly in practical 5G systems. To address this limitation, we propose StructFlow-HPR, a structured pose-conditioned flow matching framework for generative CSI augmentation. StructFlow-HPR learns a continuous latent transport process from Gaussian noise to real CSI representations under pose guidance, while preserving the receiver-frequency topology of CSI through a reconstruction-preserving autoencoder. A pose-conditioned Transformer is further designed to model the latent velocity field and generate pose-aligned CSI samples via ordinary differential equation sampling. Experiments on real-world 5G sensing data show that StructFlow-HPR can produce realistic CSI-pose pairs and improve downstream HPR performance under limited-data conditions.

Closest papers

Nearest neighbours by meaning across the whole index.

5G Sensing for Human Pose Estimation with PRS-based CSI: An Experimental Demonstration

eess.SP ·2026-10-27 ·Zhaorui Yin, Pietro Morri, Mattia Brambilla, Monica Nicoli
similarity 0.68
Abstract

This paper presents an experimental study of device- free 2D human pose estimation using Channel State Information (CSI) extracted from downlink Fifth Generation (5G) Positioning Reference Signal (PRS). The proposed system employs a Next Generation Node Base (gNB) transmitting PRS to a User Equipment (UE) equipped with two receive antennas to measure the radio channel. The CSI is estimated using a least-squares (LS) method, and processed through amplitude smoothing and phase calibration. The resulting amplitude and phase representations are used as inputs to a deep learning model for pose estimation. We compare amplitude-only input with joint amplitude-phase training at a bandwidth of 20 MHz. The joint training outperforms the amplitude-only solution and achieves Percentage of Correct Keypoints (PCK) equal to 32.2%, 72.9%, and 84.2% below 10%, 30%, and 50% of the distance between left shoulder and right hip, respectively. These results demonstrate that standardized downlink 5G PRS-based CSI contains useful information for human pose estimation, even with a simple radio configuration and a relatively small dataset.

0.30

WiSPER: Pose-Supervised Predictive and Residual Flow Refinement For Multi-Person 3D Pose Estimation With WiFi CSI

cs.CV ·2026-10-04 ·Gabriel Lee Jun Rong, Shanhong Liu, Pai Chet Ng, Konstantinos N. Plataniotis, Jamal Seyedmohammadi +1 more
similarity 0.67
Abstract

Multi-person 3D pose estimation with WiFi channel state information (CSI) is challenging because reflections from different people overlap without directly identifying individual joints. Existing masked embedding objectives capture wireless relationships without explicit pose supervision, while structured decoders can retain coordinate errors. We propose WiSPER, a two-stage framework combining pose-aware predictive pretraining with conditional residual flow refinement. Pose-Aware Masked Embedding Learning (PAMEL) couples masked latent prediction with auxiliary pose-set supervision on the same CSI context, guiding the encoder toward joint localization from partial observations. Residual Flow refinement with Transformer (ReFT) generates a set of pose candidates to accommodate a variable number of people and refines each candidate through a conditional flow guided by its coarse coordinates and per-joint decoder features. Both stages use paired CSI and pose annotations during training, while inference requires only CSI. Experiments on the PiW3D dataset show that WiSPER achieves an overall mean per-joint position error of 63.72 mm, a 40.0% reduction relative to WiFi-JEPA. For experiments with two and three people, WiSPER reduces MPJPE by 42.1% and 38.1%, respectively. Pose-supervised pretraining configurations obtain lower errors than CSI-only JEPA, and enabling the trained residual refiner reduces overall MPJPE by 13.8-15.6% across the evaluated configurations.

0.17

OmniPoser: Flexible Human Motion Recovery in the Wild with Masked Flow Matching

cs.CV ·2026-10-14 ·Minghao Liu, Tutian Tang
top venuecode/data similarity 0.63
Abstract · Accepted as a poster at the European Conference on Computer Vision (ECCV) 2026

Recovering 3D human motion from sparse wearable sensors is challenging due to the inherent noise, occlusion, and instability of real-world tracking signals. Existing approaches are restricted to fixed sensor configurations and, when built on diffusion models, are computationally prohibitive for real-time deployment. We propose OmniPoser, a universal framework that recovers full-body SMPL motion from a flexible combination of heterogeneous inputs, such as 3D keypoints, sparse IMU rotations, head-mounted 6-DoF poses, or any subset thereof, within a single model. OmniPoser introduces a cross-modal masking mechanism paired with a Masked Conditioning Encoder, enabling one architecture to incorporate diverse sensor configurations through a masked design. A decoupled dual-stream generative backbone generates complete motion via Conditional Flow Matching, requiring only a single ODE integration step at inference. Across three settings and seven benchmarks, including in-the-wild Nymeria and Ego-Exo4D datasets, OmniPoser performs on par with state-of-the-art methods while running at over 700 FPS. The project page is available at https://jamesbridgewater51.github.io/omniposer-eccv/.

0.57

KOALA: Koopman Operator Learning for WiFi-Based Anticipatory Hum

cs.LG ·2026-08-16 ·Quang-Anh N. D., Duc Pham Minh, Thao Phuong Pham, Minh Anh Nguyen, Huan X. Nguyen +1 more
top venue similarity 0.61
Abstract · 27 pages, 3 figures

WiFi Channel State Information (CSI) has emerged as a privacy-preserving alternative to cameras for human pose estimation. However, existing approaches treat pose inference as an instantaneous regression problem and do not model temporal dynamics, making future motion prediction infeasible. Naively applying vision-based prediction methods compounds the estimation noise already present in CSI-derived poses, as autoregressive rollouts amplify errors at every step. We propose KOALA, the framework for human motion prediction directly from WiFi CSI, by lifting noisy CSI-derived pose sequences into a learned Koopman latent space where nonlinear dynamics become linear, enabling multi-horizon prediction via simple matrix-vector products without autoregressive iteration or error accumulation. A residual CSI-conditioned operator resolves the identity attractor problem inherent from Koopman formulations, and an anchor-delta prediction head eliminates the degenerate shortcut of copying the current pose across all horizons. To regularise the lifting and operator jointly, we introduce a Koopman Anchored Latent (KAL) loss that operates in the temporal-encoder feature space, enforcing dynamical consistency across prediction horizons without requiring contrastive, spectral, or auxiliary losses. Experiments on MM-Fi and WiPose show that KOALA achieves robust, consistent performance across both short- and long-term prediction horizons, outperforming all baselines by a substantial margin.

0.40

Wear and Go: Calibration Free Sparse Inertial Motion Capture via Online Sensor Setup Estimation

cs.CV ·2026-11-17 ·Yuanshuo Tan, Licheng Zhong
similarity 0.61
Abstract

Sparse inertial motion capture typically assumes that each sensor's anatomical identity and mounting orientation are known. We present MOSAIC (Motion-based Sensor Assignment and Inertial Calibration), a framework that recovers this setup from ordinary motion without a calibration pose. Our central insight is that body pose changes continuously while the sensor setup persists, allowing movements that are individually ambiguous to provide complementary evidence over time. A setup network processes unordered sensor streams with temporal and cross-sensor attention, then accumulates assignment and rotation evidence into a session-level estimate. The recovered setup canonicalizes measurements for frozen pretrained pose estimators, separating sensor configuration from motion reconstruction. For sensors worn at prescribed body sites, evaluation on real inertial recordings with randomized setups shows near-calibrated pose accuracy for bounded offsets and substantial benefits from accumulation under arbitrary orientations. Transfer across pose networks supports setup recovery as a reusable interface between interchangeable sensors and pretrained pose models.

0.18

PoseRieFlow: Riemannian Flow Matching for Whole-Body Text-to-Pose Generation

cs.CV ·2026-11-06 ·Jan Spindler, Bardia Ardakanian, Patrick Stotko, Reinhard Klein
similarity 0.59
Abstract

We present PoseRieFlow, a compact flow-matching framework for text-conditioned generation of whole-body 3D human poses. Prior text-to-pose methods either neglect articulated hands or model rotations in Euclidean space despite their non-Euclidean geometry. PoseRieFlow instead formulates generation directly on the product manifold of SMPL-H joint rotations, learning a text-conditioned vector field that transports samples from an isotropic $\mathrm{SO}(3)$ Gaussian prior to the data distribution along Riemannian geodesics. A part-tokenized Diffusion Transformer aggregates the 52 joints into eight body-part tokens, allocating a dedicated token and nonlinear projector to each hand, and restores per-joint resolution through part-specific decoders, shortening the sequence while improving kinematic fidelity over per-joint tokenization. With only 21.6M trainable parameters, PoseRieFlow supports expressive SMPL-H generation with detailed hand articulation at a fraction of the scale of recent LLM-based generators. On PoseScript, it attains the lowest whole-body kinematic error among all hand-producing methods, with consistent kinematic gains from the Riemannian formulation over its Euclidean counterpart at every practical inference budget, while distributional and retrieval metrics remain comparable between them.

0.21

Frame-Consistent Feed-Forward 3D Gaussian Splatting from Sparse Unposed Images

cs.CV ·2026-10-16 ·Viruthshaan Vinasirajan, Ranga Rodrigo
similarity 0.58
Abstract

Feed-forward Gaussian models have made novel view synthesis almost instantaneous. Feed-forward methods predict Gaussians directly, either in two stages or in a single merged pass. Using two separately trained models is attractive because each can specialize in its own objective: one for accurate pose estimation and the other for high-quality reconstruction, rather than forcing a single jointly trained network to compromise between the two. A natural instantiation pairs a frozen pose estimator, VGGT, with a frozen reconstruction backbone, TokenGS. Prior work, such as VGGT-X and 3R-GS, also adopts a two-stage design, but attributes the resulting quality degradation to noisy pose estimates and introduces learned refinement. We show that this is not the primary source of the problem. Through per-camera analysis across 107 scenes from two datasets, DL3DV and MipNeRF360, using COLMAP poses as the reference, we find that the rotation error after alignment is small (median 1.6 degrees), whereas the translation scale is offset by a large, dataset-consistent factor. Controlled ablations over 140 DL3DV scenes show that the primary obstacles are two integration failures rather than pose error: a coordinate-frame inconsistency and a translation-scale mismatch, both of which can be corrected deterministically. With these fixes, a frozen VGGT driving a frozen TokenGS achieves 22.47 PSNR, within 0.51 dB of the COLMAP reference, with no additional training, when poses are estimated from all scene views. In the sparse setting, where reconstruction uses only four context images under the standard pose-free protocol, the same pipeline matches this all-view quality, yielding a fully COLMAP-free pipeline without any refinement step.

0.11

SignMimic: Robust High-Quality Sign Language Motion Generation via Human-Shape-Oblivious Pose Transfer Guidance

cs.CV ·2026-09-12 ·Zhewen He, Junyi Yu, Haomian Huang, Zhenhua Li, Yi Fang
similarity 0.58
Abstract

We study the challenge of sign language video mimicking: given a driving video and a single reference frame, synthesize a video where the target signer reproduces the source motion while preserving identity and linguistic form. Prior pipelines entangle rigid motion, non-rigid deformation, and view-dependent completion in a monolithic generator, causing handshape drift and spatio-temporal instability. We present SignMimic, which (i) applies a TNet-based model to study SE(3) rigid canonicalization to stabilize global pose, (ii) performs non-rigid adaptation in a canonical space to preserve fine-grained articulators (hands/face) and coarticulation via NIF2D, and (iii) uses Pose-MAE-style completion before conditional video diffusion. This factorization injects geometric and linguistic priors, yielding shape and spatio-temporal consistency. On several large-scale datasets (ASL 50K, How2Sign, CSL News), SignMimic achieves state-of-the-art-level performance on video quality, identity similarity, and frame continuity while also achieving minimal loss when performing back translation (SLT) on generated videos. Ablations confirm the role of rigid canonicalization, non-rigid adaptation, and completion. Code is available at https://anonymous.4open.science/r/UniSignMimicTurbo-6088; model checkpoints and video examples will be released.

0.19