CS Paper Radar

PHASE: Compliance-Enabled Tactile Phase Retrieval for Few-Shot Insertion Learning

Jeremy Siburian, Cristian C. Beltran-Hernandez, Tatsuya Matsushima, Yusuke Iwasawa, Masashi Hamaya, Mai Nishimura

cs.RO ·submitted 2026-09-25 06:53 UTC · v1
publishedcode/datahot direction

Abstract

Contact-rich assembly tasks such as peg-in-hole insertion remain difficult to learn from limited demonstrations. While retrieval-augmented imitation learning, which augments target demonstrations with relevant prior data, offers a promising direction, its applicability to contact-rich manipulation remains largely unexplored. Contact-rich insertion unfolds over multiple phases from search to insert, and retrieving phase-specific experience from prior data in principled ways remains an open question. Our key insight is that a compliant wrist enables the robot to sustain contact throughout execution, producing rich tactile and force signals that naturally reveal the phase structure of insertion and inform what should be retrieved. Based on this insight, we present PHASE (PHase-Aware Segmentation and REtrieval), a framework for compliance-enabled tactile phase retrieval that integrates multimodal contact-aware representation learning, variable-length phase segmentation from tactile signals, and phase-consistent retrieval for policy learning. We evaluate PHASE on real-world peg-in-hole insertion across five peg geometries, comparing against retrieval strategies drawn from state-of-the-art methods under a shared policy architecture. PHASE improves the overall success rate by 13 percentage points over the strongest non-phase-aware baseline, and improves performance under unseen initial positions by 30 percentage points. These results demonstrate that aligning retrieval with interaction-defined contact phases substantially improves robustness in few-shot insertion learning.

Comment
Accepted ro IROS 2026. Project page: https://omron-sinicx.github.io/phase/

Closest papers

Nearest neighbours by meaning across the whole index.

Self-Supervised Anchoring of Fingertip Sensing to Proprioception and Proactive Actions for Robot Imitation Learning

cs.RO ·2026-09-24 ·Tomohiro Motoda, Masaki Murooka, Keisuke Shirai, Hanbit Oh, Ryoichi Nakajo +4 more
code/data similarity 0.74
Abstract · Project page is available at https://tomohiromotoda.github.io/nia.propra/

Robotic imitation learning often relies on external cameras, yet local interaction cues such as object proximity, contact onset, and grasp state are difficult to observe near the fingertips because of occlusion and limited temporal resolution. We study how to effectively incorporate complementary fingertip sensing into imitation learning using pressure-sensitive tactile and reflective proximity sensors, along with pretrained sensor encoders. The two modalities provide information at different manipulation phases: proximity sensing is informative before contact, whereas tactile sensing becomes informative after contact. However, naively adding these signals to a policy does not consistently improve performance and can even underperform vision-only policies, suggesting that sparse, phase-dependent sensor signals are difficult to exploit from limited demonstrations. We therefore propose a proprioception-anchored pretraining method, PROprioceptive-and-PRoactive Anchoring (PROPRA), which independently aligns each fingertip sensor history with proprioceptive and action segments. This provides a continuously available sensorimotor reference, allowing each sensor to be aligned independently during its informative phases. Experiments on real-world manipulation tasks show that our pretraining method improves average success rates over vision-only policies and image-anchored pretraining baselines. Representation analysis further shows that it preserves richer information about pre-contact states, enabling more effective use of complementary fingertip sensing. Please refer to our project page: https://tomohiromotoda.github.io/nia.propra/

0.32

Blind Precise Assembly: Proprioceptive Sim-to-Real Peg-in-Hole for Diverse Parts

cs.RO ·2026-10-16 ·Antonia Bronars, Younghyo Park, Kushal Kedia, Pulkit Agrawal
code/data similarity 0.71
Abstract · 21 pages, 15 figures, 7 tables. Antonia Bronars and Younghyo Park contributed equally. Project page: https://younghyopark.me/blind-proprioce…

Every robot already carries high-resolution contact sensors: its own joints. Legged robots and humanoids exploit them to walk, run, and track whole-body motions without vision, but there the contacts are large and forceful. Is joint sensing also enough for precise, contact-rich assembly, where the robot must find a millimeter-scale opening, mesh gear teeth, or catch a thread through light contact? We study this question by training blind assembly policies that observe only a short history of joint positions, velocities, and their own actions, without visual, force, torque, or tactile sensing. The poses of both the fixture and the part are unknown to the policy, and the grasp is randomized substantially. The policy must therefore assemble the parts through contact, sensed exclusively through its own proprioception. Trained with reinforcement learning entirely in simulation over randomized parts, grasps, and contacts, such policies learn peg insertion, gear meshing, and nut threading. The peg insertion policy transfers zero-shot to the real world and inserts pegs of different shapes and sizes in 73% of trials. Controlled comparisons with matched visual policies in simulation show that blind policies generalize far better to unseen part shapes and sizes, though they can be slower. Training such policies needs thousands of different assemblies, each simulated with its clearance intact, so we also release an open-source generator that builds them procedurally from exact convex pieces for MuJoCo; it is more accurate and faster than convex decomposition or MuJoCo's signed-distance collision. Videos and interactive simulations are at https://younghyopark.me/blind-proprioceptive-assembly/.

0.48

TacBPM: A Tactile-conditioned Behavior Prior Model for Dexterous Reorientation

cs.RO ·2026-09-16 ·Jie Yin, Wanli Xing, Zeyuan Zhao, Xuezhou Zhu, Zhijie Deng +1 more
similarity 0.71
Abstract · Corresponding to: Jie Yin (jie.yin@sharpa.com)

Dexterous in-hand manipulation requires policies that coordinate high-DoF hand joints through intermittent, contact-rich interaction. Beyond target-orientation tracking, such policies must discover finger gaits that preserve object stability while adapting to geometry, anisotropy, pose, contact, and sensing changes. We propose \method, a tactile-conditioned behavior prior model for dexterous reorientation. \method distills multi-scale sphere specialists into a latent controller and lets downstream policies reuse the fixed tactile prior through residual latent actions, reducing renewed exploration from raw joint commands. The prior conditions on tactile-proprioceptive history so latent behavior reflects the current hand-object interaction. We evaluate arbitrary-pose transfer across anisotropic objects, commanded-axis rotation, and an arm-hand Grasp-to-AnyPose task in which the robot must grasp, lift, transport, and reach goal poses for novel tool geometries and generalized placements. Extensive experiments demonstrate that the proposed method accelerates training and enables stable policies where matched raw-action PPO remains near failure, with successful sim-to-real transfer in in-hand and arm-hand tasks.

0.20

DexTaG: Tactile-as-Guidance in Reinforcement Learning for Dexterous Manipulation

cs.RO ·2026-09-27 ·Han Yang, Yian Wang, Yunlong Song, Zhenjia Xu, Chuang Gan
similarity 0.71
Abstract

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

0.19

ContactDP: Contact-Guided Diffusion Policy for Tight Insertion Tasks

cs.RO ·2026-09-20 ·Chengyi Xing, Shaoxiong Yao, Diego Romeres, Devesh K. Jha
hot direction similarity 0.71
Abstract · 8 pages, 5 figures

High-precision connector insertion remains challenging for robotic systems due to tight mechanical tolerances, partial observability during contact, and multimodal uncertainty arising from occlusion and contact ambiguity. Successful insertion requires closed-loop contact guidance that continuously integrates global alignment cues with local contact feedback to produce stable corrective actions under interaction. In this work, we present ContactDP (Contact-Guided Diffusion Policy for Tight Insertion Tasks), a multimodal diffusion-policy framework for contact-rich insertion. ContactDP jointly integrates wrist RGB observations, fingertip tactile sensing, and wrist-mounted force-torque measurements to infer contact state and generate temporally consistent corrective motions during insertion. To ensure stable execution under contact, the learned policy operates together with a hybrid position-force controller that provides compliant low-level interaction. We evaluate our approach on a suite of industrial-grade connector insertion tasks with varying connector geometries, grasp conditions, and initial misalignment. Across all tasks, ContactDP significantly outperforms vision-only diffusion policies for performance, reliability and generalization.

0.30

InsertAnything: Generalizable Contact-Rich Precision Insertion from Simulation to Reality

cs.RO ·2026-09-21 ·Zhenghua Ma, Xinpan Meng, Zeyu Liu, Muyuan Ma, Hengdi Zhang +2 more
benchmarkcode/data similarity 0.70
Abstract

Contact-rich precision insertion is a key manipulation skill in robotic assembly. Tight clearances make insertion more sensitive to alignment errors and prone to collisions and jamming, while variations in geometry and clearance across parts further complicate policy reuse. We present a reinforcement learning framework that trains insertion policies entirely in simulation for direct deployment without real-world demonstrations or policy fine-tuning. By combining target poses with compact three-dimensional fingertip force feedback, the policy learns to search for alignment and correct its motion despite errors in the estimated hole position. A decoupled gated reward coordinates alignment and insertion. Force-signal smoothing and state-independent standard deviations stabilize the learning process. The resulting policies perform real-world insertion across multiple hole geometries with a minimum nominal clearance of 0.02 mm and improve success while reducing peak contact forces under hole-position errors. Cross-clearance and cross-geometry evaluations further confirm policy generalization. The system achieved the first perfect score of 20/20 on ManipulationNet's peg-in-hole benchmark under its Human-in-the-Loop protocol, with fully autonomous insertion motions. A single policy trained only on a simulated hexagonal insertion task achieved an overall success rate of 95.0% across eight unseen real-world insertion tasks. These results show that learning entirely in simulation can yield precision insertion skills that can be deployed directly and reused across real-world tasks. The project website (https://mzhsoul.github.io/InsertAnything/) provides open-source simulation and real-robot experiment scripts, assets, and trained checkpoints.

0.35

Evaluating Tactile Foundation Models for End-to-End Imitation Learning in Contact-Rich Manipulation

cs.RO ·2026-10-31 ·Masaki Murooka, Ryoichi Nakajo, Tomohiro Motoda, Koshi Makihara, Hanbit Oh +2 more
publishedcode/data similarity 0.69
Abstract · Accepted for the 2027 IEEE/SICE International Symposium on System Integration (SII 2027)

Tactile sensing plays an important role in imitation learning for contact-rich manipulation by providing direct observations of physical contact with objects. Recently, several tactile foundation models (TFMs) have been proposed to learn general-purpose tactile representations through pretraining on large-scale tactile datasets. However, how these pretrained tactile representations should be leveraged for end-to-end imitation learning remains insufficiently explored. In this work, we integrate multiple TFMs into Diffusion Policy and systematically evaluate their effectiveness for contact-rich manipulation under common experimental settings. We further investigate adaptation strategies, including encoder fine-tuning and task-specific mid-training, to understand how pretrained tactile representations can be effectively used for downstream imitation learning. Through extensive evaluation across diverse manipulation tasks in both real-world and simulation environments, including more than 5,000 real-world policy rollouts, we provide empirical insights into the use of TFMs for end-to-end imitation learning. Project page: https://mmurooka.github.io/tfm4il-project-page/

0.29

Touch Where It Matters: Learning Local Tactile Policies for Fine-Grained Gripper Control

cs.RO ·2026-10-17 ·Mingyuan Ba, Yanan Zhou, James Zhao, Weiming Zhi
similarity 0.69
Abstract · 9 pages, 11 figures, 3 tables

Visual imitation policies can organise task motion, yet contact-rich object use demands gripper adjustments beyond coarse opening and closing. We study fine-grained gripper control as a local feedback problem within ongoing task execution. Our approach assigns tactile feedback a dedicated control role during contact-rich task stages. We introduce ContactPolicy, a learned local controller that takes over the gripper while a visual base policy continues to control the arm. ContactPolicy combines tactile and force histories with current robot state to jointly predict gripper increments and their modulation, updating the gripper target from each new observation. An Intent policy manages control handover between the visual base policy and ContactPolicy. Real-world experiments on container opening, object handling, and tool operation show improved task success over both the Visuomotor Policy and Tactile-Force Policy baselines. Execution analysis illustrates how the gripper adjusts contact within an ongoing task, including periods of target retention and fine-grained changes as interaction conditions evolve. Arm-state ablations and failure analysis further examine how execution context supports local regulation. These results support task-local tactile policies for fine-grained gripper control within visual manipulation.

0.16