CS Paper Radar

PipeDRAM: A Data-Transposition-Free Processing-Using-DRAM Architecture with Hardware/Software Pipelining

Geraldo F. Oliveira, Ataberk Olgun, Ismail Emir Yüksel, F. Nisa Bostancı, Pedro H. E. Becker, Mohammad Sadrosadati, Saugata Ghose, Juan Gómez-Luna, Onur Mutlu

cs.AR ·submitted 2026-09-25 08:42 UTC · v2
publishedcode/data

Abstract

Processing-using-DRAM (PUD) architectures exploit the analog operational properties of DRAM to perform bulk bitwise Boolean and arithmetic operations inside memory arrays by organizing data in a vertical layout, where operand bits are stacked along DRAM columns. However, modern computing systems natively employ a horizontal data layout that preserves the cache line abstraction, leverages spatial locality in row buffers, and enables high memory throughput. This fundamental mismatch forces existing PUD architectures to frequently perform data layout transformations between horizontal and vertical formats, incurring significant performance, energy, and system integration overheads. Our goal is to eliminate data transposition overheads in PUD systems at low cost. To this end, we propose PipeDRAM, a PUD architecture that eliminates the need for runtime data layout transformation, enabling PUD operations directly over horizontally laid-out data. PipeDRAM's key ideas are to (i) deterministically reorganize bits inside each memory request to enable a PUD-friendly data placement within a DRAM array in a horizontal data layout, and (ii) employ a pipeline-based execution model that overlaps bit-dependent and bit-independent in-DRAM operations to exploit bit-level parallelism across the memory array. We compare PipeDRAM to different computing platforms. PipeDRAM provides (i) 11.8x, 11.8x, and 80.4x higher performance and (ii) 25.4x, 3.0x, and 38.0x lower energy consumption than three state-of-the-art PUD systems. PipeDRAM incurs low area cost on top of a DRAM chip (1.86%) and CPU die (0.05%). To enable further research on PUD systems, we open-source PipeDRAM at https://github.com/CMU-SAFARI/PipeDRAM.

Comment
Extended version of MICRO 2026 paper

Closest papers

Nearest neighbours by meaning across the whole index.

RAPID: Row-Parallel Arithmetic Processing in DRAM

cs.AR ·2026-10-01 ·William C. Tegge, João Paulo Cardoso de Lima, Shouzhi Fang, Jeronimo Castrillon, Alex K. Jones
similarity 0.79
Abstract

Processing-using-memory (PUM) architectures perform computation directly within DRAM to reduce costly data movement between memory and processors. Because charge-sharing operations are confined to individual bitlines, existing DRAM-PUM architectures reorganize data into column-oriented, bit-serial representations. This organization is fundamentally incompatible with the row-oriented, word-parallel layouts used by conventional processors and accelerators, requiring expensive data-layout transformations whenever computation transitions between PUM and conventional execution. In this paper, we present RAPID, a Row-parallel Arithmetic Processing-In-DRAM architecture. RAPID augments the DRAM subarray with two lightweight extensions: migration cells that enable localized horizontal data movement between neighboring bitlines and inversion cells that provide efficient in-array logical inversion. These primitives enable RAPID to operate directly on row-parallel, bit-parallel data, preserving CPU-compatible layouts while exploiting the massive parallelism of the DRAM subarray. In particular, RAPID demonstrates that localized horizontal communication is sufficient to realize shallow arithmetic networks and efficient parallel reduction for multiplication, reducing arithmetic latency while preserving throughput and eliminating costly data-layout transformations, all while maintaining the conventional DRAM array organization. We demonstrate the feasibility and overhead of augmenting DRAM subarrays with migration and inversion cells through detailed transistor-level layout and SPICE-validated circuit simulations. Using the RAPID compiler it is possible to evaluate the performance and data reorganization tradeoffs to ensure the best execution across combined CPU and PUM. Evaluating RAPID on 19 MLPerf benchmarks, there is a 5.9x higher end-to-end performance compared to SIMDRAM for DDR4 PUM execution.

0.27

Programmable Data Layouts via On-The-Fly Data Transformation

cs.AR ·2026-10-10 ·Cole Strickler, Renato Mancuso, Manos Athanassoulis, Heechul Yun
top venue similarity 0.76
Abstract

The performance of modern computing systems is heavily bottlenecked by the widening gap between processing throughput and main memory latency, a problem exacerbated when an application's logical data access patterns misalign with the physical layout of data in memory. To address this, we propose a hardware-software co-design framework comprising the Data Transformation Language (DTL) and the Data Transformation Unit (DTU). DTL allows programmers to concisely express complex data layout reorganizations, which the compiler translates into efficient hardware routing configurations. The DTU, a hardware engine logically situated between the Last-Level Cache (LLC) and main memory, transparently evaluates these configurations on-the-fly to gather scattered data elements into dense, logically contiguous cache lines. By converting explicit layout transformations into virtual views, this approach eliminates the need for explicit data materialization in software. We evaluate the DTU within a quad-core RISC-V SoC using FireSim, demonstrating substantial improvements in execution speed and memory efficiency.

0.41

M3D-FLOW: A Monolithic 3-D-Stackable Processing-Near-DRAM Architecture for Generative Normalizing Flow Applications

cs.AR cs.ET ·2026-10-19 ·Bipin Thapa Magar, Ishan Thakkar, Sudeep Pasricha
published similarity 0.67
Abstract · 13 pages, 12 figures. Presented in CASES 2026 as a part of ESWEEK 2026. Accepted for publication in IEEE TCAD

Normalizing Flows (NFs) have shown strong results in generative modeling, recently reaching state-of-the-art image generation performance. However, their repetitive, sequential operations limit the computational and memory efficiency achievable with GPUs and TPUs. We propose M3D-FLOW, a novel monolithic 3D-stackable (M3D) DRAM-based processing-near-memory (PNM) architecture that eliminates memory bottlenecks using a Cu-Cu hybrid-bonded logic die integrated with an M3D DRAM die. The M3D DRAM provides dense bank integration and a tiered organization with variable access latencies that M3D-FLOW exploits for the efficient processing of different NF workloads. To maximize compute density while minimizing area, energy, and thermal overhead, M3D-FLOW employs hybrid binary--stochastic floating-point multipliers, performing mantissa multiplication in the stochastic domain and exponent operations in the binary domain. A pipelined execution strategy maps sequential NF stages across dynamically partitioned PE groups, and together with the stochastic hardware, enables M3D-FLOW to achieve at least $6.6\times$ higher performance and $3\times$ better energy efficiency than prior PNM accelerators, with only a 2.2% bits-per-dimension (BPD) increase over bfloat16 and 4.1% over FP32. An analysis of stochastic hardware variants further shows that shorter stochastic bitstreams reduce execution time by up to $3.3\times$ at the cost of higher approximation error, providing a concrete design guide for latency--accuracy trade-offs.

0.26

TileDRAM: Compiler-Controlled Tile-to-DRAM Layouts for 3D DRAM GPGPUs

cs.AR ·2026-10-16 ·Guangyuan Xu, Lanxuan Zhang, Ziyang Li, Zhaoshi Li, Yajun Ha
similarity 0.67
Abstract

Modern GPU compilers expose rich layout abstractions for mapping tensors to threads and on-chip resources, but compute-unit-local (CU-local) 3D DRAM architectures lack a corresponding abstraction for specifying how operand-tile data are arranged within the DRAM address space. Without such an abstraction, conventional placement under the existing DRAM address mapping can subject structured tile accesses to severe row-buffer conflicts. We present TileDRAM, a compiler-runtime toolchain that introduces tile-to-DRAM layouts as a compiler-visible abstraction for DRAM placement. TileDRAM extends the GPU Linear Layout abstraction from compute-side mapping targets to DRAM placement coordinates and selects layouts per tile access signature, using recurring tile-local access behavior as the specialization unit. Since row-buffer locality depends on ordered request history, TileDRAM evaluates candidate layouts through their row-buffer behavior under fixed DRAM address mappings. Accesses under the selected layouts are realized through ordinary address arithmetic, without new address-remapping hardware or ISA support. In full-trace replay on Accel-Sim/Ramulator2 across 108 mixture-of-experts (MoE) feed-forward network (FFN) cases, TileDRAM reduces the request-weighted row-conflict rate from 75.7% to 15.2% and achieves a 1.77x geomean speedup. Retargeting six traces to six 3D DRAM organizations yields a 2.20x geomean speedup under the same compiler abstraction. On an RTX 3090, address transformation adds 0.17% geomean overhead over identity.

0.15

Terracotta: Enabling the Adoption of New DRAM Techniques via a Flexible DRAM Interface and Memory Controller

cs.AR cs.CRcs.DC ·2026-10-05 ·Harsh Songara, Konstantinos Kanellopoulos, F. Nisa Bostancı, Konstantinos Marios Sgouras, Ataberk Olgun +4 more
publishedcode/datahot direction similarity 0.66
Abstract · Extended version of the MICRO 2026 paper

DRAM continues to limit the performance, energy efficiency, and robustness of modern systems. Many prior works propose DRAM techniques that support in-DRAM computation, improve memory access latency and parallelism, and enhance DRAM maintenance and reliability. However, adopting each new technique requires repeated modifications to the rigid DRAM interface and memory controller, hindering its deployment. Our goal is to reduce these repeated modifications. We observe that the DRAM commands and memory controller structures of many DRAM techniques are similar. Our key idea is to use these similarities to compose a set of primitives for implementing diverse DRAM techniques. We propose Terracotta, a new framework with two flexible components: (i) custom command extensions that let DRAM vendors define new commands within a single, standardized interface, and (ii) a programmable memory controller that system designers can program to support new DRAM techniques post-silicon. Together, these enable deployment by configuring the memory controller instead of modifying the interface and controller. We design Terracotta for a DDR5-based system and evaluate its performance, energy, and hardware complexity. For four DRAM techniques from four distinct domains (processing-using-DRAM, low-cost DRAM maintenance, subarray-level parallelism, and latency reduction), Terracotta retains almost all of the performance benefits (>96%) of custom implementations. A Terracotta-based composition of two techniques outperforms the Terracotta-based implementation of each technique alone, demonstrating the benefits of adding techniques without repeated interface and controller modifications. Terracotta incurs low DRAM energy (0.6-3.2%), area (0.03%), and power (0.56%) overheads in a high-end server-grade processor. Terracotta's source code is freely available at https://github.com/CMU-SAFARI/Terracotta.

0.53

Compiling Semi-Ring Dynamic Programming to Tier-Aware 3D-DRAM Processing-in-Memory

cs.AR ·2026-10-06 ·Mahbod Afarin, Tsung-Han Lu, Tajana Rosing
similarity 0.65
Abstract

Processing-in-Memory (PIM) on monolithic 3D (M3D) DRAM is a promising answer to the memory wall for data-intensive dynamic programming (DP), yet extracting its performance today demands hand-written kernels: the programmer must pick a tile size, place data across non-uniform-latency memory tiers, partition work between heterogeneous processing units, and insert the right broadcasts and queues by hand. We present GenMLIR, an MLIR compiler that automates this mapping for tier-aware 3D PIM. GenMLIR encodes the semi-ring generalized grid update, the algebraic form shared by all-pairs shortest path (APSP) and sequence alignment, as a first-class IR abstraction, and lowers it through four GenDRAM-aware pass groups that derive blocked tiling, tier-aware placement, tile-to-PU assignment, and explicit communication. We also characterize precisely which DP recurrences the abstraction admits and which it does not. On the GenDRAM architecture, GenMLIR-generated code runs up to 5.8 (APSP) and 16.7 (alignment) faster than a lowering without compiler support, and 1.2-1.4 faster than a standard affine-tiling PIM compiler we also implement, reaching 90-100% of an achievable-performance bound. It expresses these workloads in 4-9 lines instead of 300-500 and compiles in a negligible fraction of runtime.

0.22

Bridging LLM Serving and CXL-SSDs with Chunk-Aware KV Cache Management

cs.AR cs.AIcs.ET ·2026-09-20 ·Hyunsun Chung, Taewan Noh, Minji Kim, Joo-Young Hwang, Hong-Yeon Kim +1 more
similarity 0.63
Abstract · 12 pages, 17 figures

NAND-backed storage offers the capacity needed to scale LLM prefix caching, but its block I/O path incurs CPU cache contention and host-DRAM staging in addition to NAND latency. Our characterization shows that these interface costs persist even with DRAM as the storage medium, motivating CXL-SSDs for byte-addressable access to NAND-backed capacity. Surprisingly, however, a stock CXL-SSD remains about 3$\times$ slower than local DRAM and no faster than an NVMe SSD, while generic prefetching provides little benefit. We present LM-CXD, a CXL-SSD specialized for LLM prefix caching. LM-CXD bridges the semantic gap between the serving engine, which knows which KV chunks will be consumed, and the device, which controls their placement and movement. It makes KV chunks device-visible I/O units, exposes NAND-to-DRAM progress to the serving engine, and uses device DRAM as a GPU-accessible buffer. LM-CXD further coordinates request scheduling with windowed prefetching and pipelines layerwise KV movement with GPU computation to hide NAND latency under limited device DRAM. Across five LLM models, LM-CXD reduces average TTFT over a stock CXL-SSD by up to 2.6$\times$ with compute asynchronous prefetching and 4.03$\times$ with layerwise prefetching, achieving TTFT within 1.5$\times$ of local DRAM on average.

0.21

StrataFlux: Memory-Hierarchy-Native Low-Bit LLM Inference

cs.LG cs.DC ·2026-11-05 ·Jake Hyun, Ziyu Zhao, Jae-sun Seo, Mohamed S. Abdelfattah
similarity 0.63
Abstract · 34 pages, 18 figures, 44 tables. Includes appendix

Quantization reduces the memory and bandwidth demands of large language model (LLM) inference but can degrade accuracy; offloading higher-precision data can instead stall generation. We introduce StrataFlux, a framework that challenges this tradeoff by recovering accuracy lost to low-bit weight and key-value (KV) cache quantization while retaining quantization's memory and speed advantages. StrataFlux co-designs refinement representation, selection, and delivery to make host RAM and solid-state drives useful sources of additional precision. Its selective precision streaming reduces transfer volume, overlaps delivery with computation, and reuses fetched precision across decoding steps so generation need not wait for every transfer. We evaluate 2-4-bit weights and 2-3-bit KV-cache on dedicated GPUs and unified-memory platforms. For 2-bit Llama-3.1-8B-Instruct weights, StrataFlux reduces WikiText-2 perplexity from 9.46 to 8.40 while maintaining 95.4% of the quantized base's throughput on RTX 5090. With 2-bit weights and KV, StrataFlux raises Qwen3-8B's AIME 2024/2025 accuracy from 11.0% to 47.1% at unchanged GPU memory use. At 128K context, Llama-3.1-8B-Instruct with 3-bit weights and 2-bit KV achieves comparable perplexity and speed to vLLM's 4-bit AWQ weights and 8-bit KV on RTX 5090, using approximately half the GPU memory. These results show that GPU-resident precision need not set the accuracy ceiling, nor offloading-tier latency dictate decoding speed.

0.20