CS Paper Radar

Terracotta: Enabling the Adoption of New DRAM Techniques via a Flexible DRAM Interface and Memory Controller

Harsh Songara, Konstantinos Kanellopoulos, F. Nisa Bostancı, Konstantinos Marios Sgouras, Ataberk Olgun, İsmail Emir Yüksel, Andreas Kosmas Kakolyris, A. Giray Yağlıkçı, Onur Mutlu

cs.AR cs.CRcs.DC ·submitted 2026-10-05 15:04 UTC · v2
publishedcode/datahot direction

Abstract

DRAM continues to limit the performance, energy efficiency, and robustness of modern systems. Many prior works propose DRAM techniques that support in-DRAM computation, improve memory access latency and parallelism, and enhance DRAM maintenance and reliability. However, adopting each new technique requires repeated modifications to the rigid DRAM interface and memory controller, hindering its deployment. Our goal is to reduce these repeated modifications. We observe that the DRAM commands and memory controller structures of many DRAM techniques are similar. Our key idea is to use these similarities to compose a set of primitives for implementing diverse DRAM techniques. We propose Terracotta, a new framework with two flexible components: (i) custom command extensions that let DRAM vendors define new commands within a single, standardized interface, and (ii) a programmable memory controller that system designers can program to support new DRAM techniques post-silicon. Together, these enable deployment by configuring the memory controller instead of modifying the interface and controller. We design Terracotta for a DDR5-based system and evaluate its performance, energy, and hardware complexity. For four DRAM techniques from four distinct domains (processing-using-DRAM, low-cost DRAM maintenance, subarray-level parallelism, and latency reduction), Terracotta retains almost all of the performance benefits (>96%) of custom implementations. A Terracotta-based composition of two techniques outperforms the Terracotta-based implementation of each technique alone, demonstrating the benefits of adding techniques without repeated interface and controller modifications. Terracotta incurs low DRAM energy (0.6-3.2%), area (0.03%), and power (0.56%) overheads in a high-end server-grade processor. Terracotta's source code is freely available at https://github.com/CMU-SAFARI/Terracotta.

Comment
Extended version of the MICRO 2026 paper

Closest papers

Nearest neighbours by meaning across the whole index.

TileDRAM: Compiler-Controlled Tile-to-DRAM Layouts for 3D DRAM GPGPUs

cs.AR ·2026-10-16 ·Guangyuan Xu, Lanxuan Zhang, Ziyang Li, Zhaoshi Li, Yajun Ha
similarity 0.72
Abstract

Modern GPU compilers expose rich layout abstractions for mapping tensors to threads and on-chip resources, but compute-unit-local (CU-local) 3D DRAM architectures lack a corresponding abstraction for specifying how operand-tile data are arranged within the DRAM address space. Without such an abstraction, conventional placement under the existing DRAM address mapping can subject structured tile accesses to severe row-buffer conflicts. We present TileDRAM, a compiler-runtime toolchain that introduces tile-to-DRAM layouts as a compiler-visible abstraction for DRAM placement. TileDRAM extends the GPU Linear Layout abstraction from compute-side mapping targets to DRAM placement coordinates and selects layouts per tile access signature, using recurring tile-local access behavior as the specialization unit. Since row-buffer locality depends on ordered request history, TileDRAM evaluates candidate layouts through their row-buffer behavior under fixed DRAM address mappings. Accesses under the selected layouts are realized through ordinary address arithmetic, without new address-remapping hardware or ISA support. In full-trace replay on Accel-Sim/Ramulator2 across 108 mixture-of-experts (MoE) feed-forward network (FFN) cases, TileDRAM reduces the request-weighted row-conflict rate from 75.7% to 15.2% and achieves a 1.77x geomean speedup. Retargeting six traces to six 3D DRAM organizations yields a 2.20x geomean speedup under the same compiler abstraction. On an RTX 3090, address transformation adds 0.17% geomean overhead over identity.

0.15

SARIA: Persistence-Aware KV Caching with Coordinated DRAM--SSD Reload for LLM Agents

cs.OS ·2026-10-22 ·Hui Li, Qihui Zhou, Xiao Yan, Shumeng Zhang, Zijie Dai +5 more
similarity 0.68
Abstract · 12 pages, 16 figures

Multi-turn LLM agents usually reuse long context prefixes, making key value (KV) caching crucial for reducing prefill latency. SSDs provide a low-cost extension to limited DRAM capacity but introduce two key challenges. Eagerly persisting all KV cache blocks incurs substantial write traffic and rapidly consumes finite SSD endurance. Meanwhile, the small number of SSDs provisioned in typical GPU servers limits aggregate reload bandwidth, making SSD-resident KV cache much slower to retrieve than that in DRAM and inflating prefill latency. We present \textsc{Saria} (Selective Admission and Reload for Inference Acceleration), a KV caching system that jointly manages DRAM and SSD by exploiting the session-level temporal locality of LLM agents to reduce SSD writes and accelerate cache reload. On the write path, \textsc{Saria} uses eviction and reuse history to selectively persist KV cache blocks that exhibit reuse opportunities beyond their DRAM residency, avoiding unnecessary writes for KV cache already hosted in DRAM. On the read path, \textsc{Saria} promotes selected SSD-hit KV cache blocks from GPU memory into DRAM after prefill, allowing subsequent reuse within the same session to reduce SSD read traffic while limiting DRAM contention. A transfer coordinator paces DRAM reads while SSD transfers are active, allowing both paths to make progress and efficiently share GPU ingress bandwidth. We implement \textsc{Saria} on LMCache MP and evaluate it using workloads from TraceLab and WEKA, covering both full-attention and hybrid-attention models. The results show that \textsc{Saria} reduces SSD writes by 57.1--58.9\% compared with popular full duplicate caching and the mean time to first token (TTFT) by 42.3--79.7\% over DRAM-only caching.

0.08

Tri-Stack-PIM: A Heterogeneous Multi-Die 3D-Integrated Processing-in-Memory Architecture for Efficient LLM Inference

cs.AR ·2026-11-10 ·Shuao Jia, Zichao Ling, Chen Bai, Kang Zhao, Jianwang Zhai
similarity 0.67
Abstract · 11 pages, 9 figures

Large language model (LLM) inference during autoregressive decoding is fundamentally memory-bandwidth-bound. Existing three-dimensional (3D) stacked processing-in-memory (PIM) architectures alleviate the off-chip bandwidth wall, yet remain constrained by several limitations: physical layer (PHY), controllers, and direct memory access (DMA) engines compete with arithmetic units for advanced-node base-die area; hybrid-bonding keep-out zones fragment the base-die floorplan and impede physical design; compute tiles built in a dynamic random access memory (DRAM) process are restricted to low logic density, capping achievable throughput; and nonlinear operations offloaded to the host reintroduce a communication bottleneck. We present Tri-Stack-PIM, a heterogeneous three-die architecture that resolves these tensions by dedicating a top DRAM die to storage, a middle buffer die on a mature process node to PHYs, DMA engines, and near-memory compute units, and a bottom base die on an advanced node exclusively to single-instruction-multiple-data (SIMD) multiply-accumulate (MAC) arrays. We further introduce a Unified Buffer-Aware Ready-based (UBAR) hardware out-of-order micro-operation scheduler that enforces cross-die dependency correctness at runtime while maximizing issue-slot utilization through a multi-term priority function, recovering up to 90% of the cycles that an in-order policy would forfeit. A joint architecture-dataflow co-exploration identifies Pareto-optimal configurations that reduce the energy-delay product (EDP) by 33-66x over naive parameter selection. Evaluated across multi-head, grouped-query, and multi-query attention (MHA, GQA, MQA) mechanisms with batch sizes 1-32, Tri-Stack-PIM achieves geometric-mean speedups of 4.95x, 2.57x, and 1.68x across all three attention mechanisms and batch sizes over a graphics processing unit (GPU) baseline, AttAcc, and H2-LLM, respectively.

0.20

A gem5-based Simulation Framework for Computing-in-DRAM

cs.AR cs.ET ·2026-10-06 ·Alexander Kusnezoff, João Paulo C. de Lima, Jeronimo Castrillon, Asif Ali Khan
code/data similarity 0.66
Abstract · 8 pages, 4 figures, 4 tables

Computing-in-Memory using DRAM (CIMD) has demonstrated substantial energy and throughput gains for memory-bound workloads consisting of bulk-bitwise operations, by performing computation directly within DRAM subarrays. Realizing CIMD, however, requires a redesign of the memory controller and careful mapping of operands onto the memory arrays. Presently, accurate FPGA-based testbeds exist, but they are costly and labor-intensive, while open-source simulators are largely trace-based and cannot execute full application runs. The only full-application CIMD simulator available, included with MIMDRAM, is built on an outdated version of gem5 and its toolchains. We present gem5-CIMD, a full-application CIMD simulation framework built on the latest version of gem5. We extend the simulated instruction set from four bitwise operations to sixteen CIM instructions spanning arithmetic, relational, conditional, and utility operations across a range of data types and bitwidths (4 to 64 bits). A complete memory-management stack comprising multi-level huge-page support, a CIM-aware allocator, and a subarray-aware address-mapping scheme ensures that CIM operands are co-located in the same DRAM subarray. In addition, gem5-CIMD is aware of the DRAM refresh interval and faithfully models and schedules the mandatory refresh operations when needed. We provide a CIM standard library intended as a compiler target and evaluate gem5-CIMD on multiple case studies including an end-to-end KNN workload. The simulator sources, including the evaluated workloads, are publicly available.

0.43

PipeDRAM: A Data-Transposition-Free Processing-Using-DRAM Architecture with Hardware/Software Pipelining

cs.AR ·2026-09-25 ·Geraldo F. Oliveira, Ataberk Olgun, Ismail Emir Yüksel, F. Nisa Bostancı, Pedro H. E. Becker +4 more
publishedcode/data similarity 0.66
Abstract · Extended version of MICRO 2026 paper

Processing-using-DRAM (PUD) architectures exploit the analog operational properties of DRAM to perform bulk bitwise Boolean and arithmetic operations inside memory arrays by organizing data in a vertical layout, where operand bits are stacked along DRAM columns. However, modern computing systems natively employ a horizontal data layout that preserves the cache line abstraction, leverages spatial locality in row buffers, and enables high memory throughput. This fundamental mismatch forces existing PUD architectures to frequently perform data layout transformations between horizontal and vertical formats, incurring significant performance, energy, and system integration overheads. Our goal is to eliminate data transposition overheads in PUD systems at low cost. To this end, we propose PipeDRAM, a PUD architecture that eliminates the need for runtime data layout transformation, enabling PUD operations directly over horizontally laid-out data. PipeDRAM's key ideas are to (i) deterministically reorganize bits inside each memory request to enable a PUD-friendly data placement within a DRAM array in a horizontal data layout, and (ii) employ a pipeline-based execution model that overlaps bit-dependent and bit-independent in-DRAM operations to exploit bit-level parallelism across the memory array. We compare PipeDRAM to different computing platforms. PipeDRAM provides (i) 11.8x, 11.8x, and 80.4x higher performance and (ii) 25.4x, 3.0x, and 38.0x lower energy consumption than three state-of-the-art PUD systems. PipeDRAM incurs low area cost on top of a DRAM chip (1.86%) and CPU die (0.05%). To enable further research on PUD systems, we open-source PipeDRAM at https://github.com/CMU-SAFARI/PipeDRAM.

0.38

CMM-MP: A Novel Memory Pooling Architecture using Purpose-built Memory Device with CXL and Ethernet

cs.AR ·2026-10-15 ·Michael Wasef, Gongjin Sun, Edmund Au, Ranjitha Gopalakrishna, Elham Movahedian +13 more
similarity 0.65
Abstract · 12 pages. Submitted to IEEE Transactions on Computers. CMM-MP is also evaluated in "LLM KV Cache Storage using CXL Memory," IEEE Computer Ar…

CXL Memory Module - Memory Pooling (CMM-MP) introduces a novel memory pooling architecture to meet the unique requirements of emerging memory-intensive workloads. This industry-first, purpose-built memory-pooling device combines the benefits of Compute Express Link (CXL) with the scalability and cost advantages of Ethernet. Multiple CMM-MP devices together provide a flexible, composable, and disaggregated memory expansion solution. The CMM-MP enables 100s of TB capacity for GPU/CPU applications without modifications. The memory pool is exposed as a large-capacity logical aggregate memory, with all pool discovery, composition, and backend network datapath tasks fully offloaded to the device. CMM-MP supports both memory pooling and sharing usage modes. It provides an application latency of 2.7 us and up to 23 GB/s of memory throughput. Our evaluations demonstrate that CMM-MP significantly outperforms RDMA-based solutions in latency and throughput. We also evaluated real-world use cases of Valkey+YCSB and DiskANN using CMM-MP.

0.39

Decoupling Disaggregated Memory Optimizations from Indexing: A Compiler-Runtime Approach

cs.DB ·2026-09-02 ·Xinpeng Zhao, Zeling Long, Chaichon Wongkham, Srijan Srivastava, Jiayi Liu +3 more
similarity 0.65
Abstract

Disaggregated memory (DM) decouples compute and memory into independently scalable pools, connected over a slower interconnect rather than a local bus. This decoupling is exactly what makes DM attractive--but it also means that every index must now reason explicitly about remote-memory access and its associated optimizations. State-of-the-art index designs respond to this by embedding remote-memory logic and optimizations directly into their core data structures and concurrency control mechanisms. Consequently, an optimization tuned for one index cannot be lifted and reused in another, and even the same index cannot be ported to a different DM architecture without a fresh round of redesign. This escalating, per-index, per-platform engineering burden is unsustainable as hardware and index requirements evolve. In this paper, we present Nox, a compiler-runtime framework that breaks this coupling by taking an unmodified, concurrent index as input and automatically generating its disaggregated-memory counterpart, without touching the original index logic. A compiler layer rewrites the index's LLVM IR to expose allocation, address, and pointer-dependency information that a centralized runtime uses to drive caching and address translation. Empirically, Nox-generated B+-trees, hash tables, and skip lists scale robustly on real RDMA and CXL hardware across every workload tested. They can also outperform some specialized, hand-crafted indexes and match others, especially on workloads that are closer to real-world ones. These results show that today's fastest disaggregated-memory optimizations need not stay locked inside monolithic, hand-crafted code--a compiler-runtime stack can generalize them while preserving the scalability of proven index implementations, without sacrificing it for portability.

0.47

VIPER: Architecture-Aware Performance Modeling for Processing-in-Memory Design-Space Exploration

cs.AR ·2026-08-24 ·Haoran Geng, Tomas Sousa Pereira, Xiaoyang Lu, Xian-He Sun, Michael Niemier +1 more
code/data similarity 0.64
Abstract · 14 pages, 12 figures. Source code available at https://github.com/Notre-Dame-HW-SW-Codesign-Lab/VIPER

Processing-in-Memory (PIM) promises to reduce data movement overhead by executing computation in or near memory, but its realized application speedup remains highly design-dependent. Non-offloadable host execution, host-PIM transfers, limited PIM capacity, and device programming latency can limit end-to-end speedup, making fast early-stage design-space exploration (DSE) essential. However, existing PIM evaluation methods remain limited: circuit- and device-level tools cannot capture these end-to-end PIM performance factors, while cycle-accurate simulation is too slow for iterative DSE. To address this gap, we present VIPER, a unified, lightweight, and architecture-aware performance evaluation framework for PIM DSE. VIPER profiles host execution once and combines the measured host behavior with a PIM-aware analytical engine that sweeps PIM-side parameters across candidate designs. It supports both Processing Near Memory (PNM) and Processing Using Memory (PUM) under task-offloading and data-triggered execution by capturing host-PIM transfer, array access, in-memory computation, device programming latency, and capacity-induced partitioning, providing rapid architecture-aware performance estimates for iterative DSE without repeated cycle-accurate simulation. We validate VIPER against a commercial UPMEM system and more than 400 cycle-accurate gem5 configurations. VIPER predicts the UPMEM offloading decision and break-even region a priori, and, with a refined transfer model, captures the measured peak-and-rolloff behavior with 12\% mean speedup error across the DPU sweep (6\% up to the 256-DPU peak). Against gem5, VIPER achieves less than 10\% error while reducing evaluation time from hours to under one minute. Case studies of UPMEM, ReRAM/FeFET crossbars, and IMCRYPTO show that architecture-aware DSE reveals key performance trade-offs that device-level evaluation misses.

0.24