CS Paper Radar

Comparative Evaluation of an XR Pen-based Control Interface for Semi-Autonomous Mobile Robot Navigation in Service Environments

Alicia Torc, Carl Tornberg, Eric Piette, Renaud Ronsse, Benoit Macq, Gustavo Alfonso Garcia Ricardez, Lotfi El Hafi, Tadahiro Taniguchi

cs.RO cs.HC ·submitted 2026-09-25 11:07 UTC · v1
hot direction

Abstract

Service robots remain difficult to deploy in domestic environments, partly because fully autonomous operation is not yet reliable in unpredictable surroundings, and partly because conventional control methods remain inaccessible to novice users. Extended Reality (XR) enables operators to visualize robot information overlaid onto the real world and to interact with augmented elements. Yet, common XR control methods, such as motion controllers and hand gestures, are still perceived as unintuitive. This paper presents a control interface that uses a commercial XR pen to command a semi-autonomous mobile robot in Augmented Reality (AR): the operator points at a position in the room, selects it, and drags an augmented arrow to set the desired orientation of the robot at this destination. Two additional interfaces, based on the XR motion controllers and hand gestures, were developed within the same framework. To assess the performance and users' perception of these interfaces, and of the XR pen in particular, a study with 10 participants compared four control methods, i.e., the XR pen, the XR motion controllers, hand gestures, and a computer-based baseline RViz, in navigation tasks performed in a home-like environment. Results show that the XR pen significantly outperforms the other methods in task selection time with the most consistent selections, and that the XR motion controllers obtain the best perceived workload and usability scores, ahead of the computer-based baseline, supporting XR-based control as an intuitive alternative for novice users. However, technical limitations in the integration of the recently released XR pen currently hold back its user experience.

Comment
Submitted for presentation at the 2027 IEEE/SICE International Symposium on System Integration (SII), Kobe, Japan

Closest papers

Nearest neighbours by meaning across the whole index.

Evaluating the Impact of Adaptive Extended Reality on Human-Robot Interaction Across the Reality-Virtuality Continuum

cs.RO cs.HC ·2026-09-25 ·Carl Tornberg, Alicia Torck, Lotfi El Hafi, Tadahiro Taniguchi
code/data similarity 0.71
Abstract · Submitted to Advanced Robotics, Special Issue on "Next Generation Cognitive Robotics: Nurturing Embodied Intelligence for a Symbiotic Future…

As populations in developed countries age and labor shortages intensify, Cybernetic Avatars (CAs) are proposed to extend human capabilities through robotic embodiments, requiring effective Human-Robot Interaction (HRI) frameworks. Extended Reality (XR), an umbrella term for Augmented Reality (AR), Augmented Virtuality (AV), and Virtual Reality (VR), offers such interfaces, but prior research typically fixes the XR modality without evaluating its effect on task outcomes. This study examines whether the XR modality impacts HRI performance and whether an adaptive interface adjusting the level of virtuality along the Reality-Virtuality Continuum (RVC) at runtime improves it. A custom XR application interfaced with a mobile manipulator supports immersive control and runtime modality switching. In a within-participant multi-room pick-and-place experiment comparing fixed AR, AV, and VR with dynamic RVC through task metrics, the NASA-TLX, and the System Usability Scale (SUS), this study demonstrates that 1) the fixed reality modality affects HRI results, and 2) dynamically changing the modality along the RVC improves them. AR yielded significantly lower mental demand, effort, and frustration than AV and VR, while the dynamic RVC condition achieved the highest throughput and lowest workload, highlighting the value of adaptive XR interfaces for human-robot symbiosis. The implementation is available at https://github.com/CarlTornberg/XR-HRI.

0.58

RUMI: A Robotiq-Matched Universal Manipulation Interface for Robot Learning with Augmented Reality and Haptic Feedback

cs.RO cs.AI ·2026-11-11 ·Kevin Avdiu, Seongjin Bien, Yannik Blei, Philine Meister, Johannes Hechtl +4 more
similarity 0.67
Abstract

Many manipulation tasks require carefully controlled contact forces for successful execution, yet large-scale, force-aware datasets remain scarce. Handheld interfaces can help by transmitting interaction forces directly through the operator's arm, but most existing designs are tailored to simple linear grippers and do not match the nonlinear mechanics of widely used robotic grippers. We present RUMI, a handheld universal manipulation interface matched to the Robotiq 2F-85 with exchangeable fingertip sensors that preserves the target gripper geometry while enabling natural input before contact and force measurement after contact. By integrating the tracking system into a virtual reality headset, our method provides real-time augmented reality feedback about the kinematic feasibility of motion on the target robot platform. We further introduce a haptic feedback mechanism that supports force-aware teleoperation for simulated and real robots. A user study shows fewer episodes containing joint-limit violations with live robot visualization and pose initialization (3/50) than without augmented reality (16/50). We additionally train imitation policies from demonstrations, collected using two different fingertip modalities enabled by the gripper-matched hardware, and assess the haptic interface's capability for collecting force-aware teleoperation datasets in simulation.

0.04

Now You Feel It, Now You See Me: Digital-Twin-based Teleoperation Interface for Dexterous Manipulation

cs.RO ·2026-10-04 ·Youngchan Shim, Kyutae Lee, JooYun Kim, Jaeseong Hwang, Harim Ji +1 more
similarity 0.63
Abstract · 8 pages, 5 figures, 4 tables

Teleoperation is becoming increasingly important for collecting high-quality demonstrations to teach robots dexterous manipulation skills. For dexterous manipulation, bare-hand tracking provides a practical way to control robotic hands and demonstrate coordinated finger movements without gloves or exoskeletons. However, this type of teleoperation faces two key feedback limitations: a lack of force feedback and visual feedback of occluded region. The absence of force feedback hinders precise and safe manipulation, as operators must infer contact force visually rather than feel them directly. Occlusion by objects or other robot parts impairs the assessment of hand positions, approach distances, and pre-grasp configurations suited to the object's shape. To address these limitations, we propose a digital-twin-based augmented reality (AR) teleoperation interface that integrates bare-hand tracking, bimanual robotic hands, and virtual representations of the robot and task objects. The interface renders tactile measurements on robot hand meshes as visuo-force feedback. Furthermore, it offers a user-controlled virtual view panel or occlusion-aware transparency rendering to provide occlusion-mitigating visual feedback. We evaluated the interface through user studies involving Task 1 and Task 2, examining how force visualization and visual assistance support demonstration collection in tasks requiring careful force regulation and manipulation under occlusion.

0.12

LICOA: Learning Instruction-Conditioned Optical Actions for Mobile Spatial Augmented Reality

cs.RO cs.CV ·2026-10-15 ·Yuchen Deng, Shunkai Zhou, Ruixuan Zhu, Haibin Ling, Bingyao Huang
similarity 0.59
Abstract · 17 pages, 8 figures

Spatial augmented reality (SAR) augments physical environments with projected content, but most systems assume that the projector pose, target region, or motion path has been fixed or specified. We instead make projected light an embodied action: given a language instruction and current visual observations, a system must decide how to move and where and at what scale to place the projection. We introduce LICOA to realize this capability. Its differential-drive chassis provides room-scale approach and repositioning, while a steerable mirror with two degrees of freedom (2DoF) and projection scale provide rapid local control of the beam. A shared interface maps synchronized external and onboard RGB cameras with robot control state to physical optical actions across pretrained action models. Because instruction-conditioned optical action lacks dedicated training data and a common evaluation protocol, we construct a matched simulation embodiment and a corpus with 150 tasks and 7,500 rendered episodes, then evaluate models trained only on this corpus in previously unseen real-world environments. Across 480 complete closed-loop real-world execution trials (rollouts) on 12 tasks, the best adapted action model achieves a 57.50% success rate and 40.64% success weighted by path length, compared with 8.33% and 5.15% for the same architecture trained from scratch. A further 150 real-world ablation rollouts support the need for both camera views and coordinated control of the chassis and mirror. These results establish a physical platform, shared perception and optical action interface, corpus, and real-world evaluation protocol for treating projected light as an embodied action.

0.22

AIRoA-0: Long-Horizon, Precise, Cross-Embodiment Manipulation from Handheld Data

cs.RO cs.AIcs.LG ·2026-11-02 ·Yueh-Hua Wu, Kei Ota, Hanlong Li, Hayata Yuasa, Jason Wang +15 more
code/data similarity 0.59
Abstract · 18 pages. Project page: https://a-0.airoa.io

AIRoA-0 (A-0) is a bimanual manipulation system learned from 16,151 hours of handheld demonstrations, with no robot data collected at any stage. The demonstrations are recorded with YUBI, our open-source handheld gripper, which lets people record manipulation data anywhere with no robot present. From a single instruction, A-0 sorts more than a dozen small parts into their numbered cells and changes the mop pads and brush of a robot vacuum; among other tasks, it unzips a pencil case and folds a towel. It performs these tasks using only a camera on each wrist, with no head or scene camera, at a site where none of its training data was recorded. Across the ten tasks of our evaluation, it averages a success rate of 78%, against 27% for the strongest of four other vision-language-action models post-trained on the same task demonstrations. We collect no teleoperation data and use no reinforcement learning or on-robot corrections, and the robot appears only at test time. The system learns which regions of each wrist view matter for the task, predicts the stage the task has reached, and decodes actions as a continuous stream. A-0 is embodiment-agnostic: it runs on robots that mount the YUBI gripper, such as a bimanual Franka, TX-G2, OpenArm and UR. We are releasing the dataset, to our knowledge the largest open dataset of handheld-gripper demonstrations with task and subtask instructions, together with the pre-trained weights and the post-training recipe. Videos of A-0 on every task are on the project page, https://a-0.airoa.io. Anyone can build the gripper, record a task of their own and post-train the model on it in under four hours on a single node of eight H200 GPUs.

0.32

Point&Spawn: Mid-Air Reference-Free Object Instantiation Using Gaze and Hand Gestures in Extended Reality

cs.HC ·2026-09-03 ·Jihyeon Lee, Ken Pfeuffer, Jinwook Kim, Jeongmi Lee
top venue similarity 0.59
Abstract · 11 pages, 6 figures, Accepted to ISMAR'26

Mid-air object instantiation in XR requires users to specify a 3D position without spatial references, such as surfaces or existing objects. We present Point&Spawn, a staged pipeline for pre-instantiation position specification through Direction Setting, Depth Setting, and Position Refinement within a continuous gesture flow. We evaluated six controller-free techniques combining Gaze or Non-Dominant Hand (NDH) direction setting with Ray Intersection, Relative Gain, or Drag&Hold depth setting in a user study (N=24) across Near and Far spawn depths. Relative Gain and Drag&Hold yielded faster and more accurate spawning, lower workload, higher usability, and greater preference than Ray Intersection. The shoulder-referenced NDH ray improved speed and coarse accuracy, whereas the viewpoint-based Gaze ray reduced hand movement with comparable final accuracy. Farther spawn depth imposed greater temporal costs as well as Gaze and accuracy costs with Ray Intersection. These findings offer empirical guidance for designing direction and depth control in spawning in XR.

0.46

UniScale: Exploring Unimanual Gesture Mapping Strategies for Gaze+Pinch-based Scaling Interaction

cs.HC ·2026-09-01 ·Kyoungwhan Mheen, Jinwook Kim, Sang Ho Yoon
published similarity 0.58
Abstract · 11 pages, 7 Figures, Accepted to ISMAR'26, TVCG'26

Object scaling serves as a fundamental spatial manipulation that enables complex and productive tasks in XR environments. This paper investigates unimanual scaling techniques for XR using gaze and hand interactions. We propose UniScale, a set of unimanual alternatives to the standard bimanual pinch, allowing users to scale objects while preserving hand availability for concurrent spatial manipulations. We design five distinct mapping strategies based on physical metaphors, exploring unimanual control that varies depth, angle, micro-gestures, and finger-distance input. We then compare these techniques against a standard bimanual baseline, in which users adjust the inter-hand distance via a bimanual pinch gesture. In a user study, we evaluate their effectiveness in a 3D object scaling task under both clutching and clutching-free conditions. The results indicate that while bimanual scaling relies on clutching for stable control, unimanual techniques excel in clutching-free conditions, significantly reducing physical hand movement. From the results, we derive valuable design implications for developing efficient 3D multimodal interactions in XR.

0.34

GHOST in the Robots: Real-Time Exocentric Dual-Robot VR Teleoperation from Onboard Cameras

cs.RO ·2026-08-29 ·Yichen Wei, Faisal Zaghloul, Soujanya C Aryal, Aanya K. Agrawal, Chengfan Li +3 more
top venuecode/data similarity 0.58
Abstract

Teleoperating multiple robots simultaneously enables additional views and coordinated control. Yet, it poses fundamental challenges: the system must present sensor data cohesively and allow operators to manage multiple robot bases, arms, and cameras while maintaining low latency. Current multi-robot teleoperation systems require multiple operators, rely on autonomy, or restrict operators to high-level commands. We present GHOST: an open-source VR teleoperation system that enables single operator control of two mobile manipulators via direct lowlevel commands using only onboard sensing. GHOST creates an exocentric 3D workspace by aligning real-time point clouds from the robots' RGB-D cameras, where scene coverage is improved through learning-based completion to aid operator spatial awareness. For control, the operator uses a mode-switching architecture to command either robot individually or both robots simultaneously. Experiments with 15 novice participants demonstrate 1.6-4x the success rate of an off-the-shelf tablet interface. For experts across nine challenging dual-robot tasks, our system enabled completion of two tasks that were infeasible with the tablet, and was 1.47x faster on average than the tablet. Website and code: https://h2r.github.io/GHOST/.

0.38