CS Paper Radar

Bandwidth, Latency, and 400 Million Kilometers: The Case for Mars-Local Compute

Maleeha Masood, Indranil Gupta, Deepak Vasisht

cs.DC cs.NI ·submitted 2026-09-25 17:32 UTC · v1
hot direction

Abstract

There have been recent proposals for human settlements on Mars in 2030s. Any human activity on Mars must be preceded by extensive robotic exploration. However, Mars exploration is bottlenecked by the low bandwidth, intermittent Mars-Earth link. For example, HiRISE, a high-resolution camera onboard the Martian orbiter MRO imaged less than 3% of Mars over eleven years, even though MRO's low resolution Context Camera had mapped more than 99% of Mars in that time. We present a systems case for shared compute for Mars exploration. Such Mars-local compute, paired with advances in computer vision and AI, can enable large volumes of data to be collected and processed on Mars while sending periodic updates, insights, and selective datasets to Earth. To overcome the lack of surface infrastructure on Mars, we propose a two-tier in-orbit deployment of computational satellites that provides consistent coverage and bandwidth. Our analysis shows that the proposed deployment can start small: one areostationary node makes compute reachable from all active Mars missions, two additional areostationary nodes can extend this coverage to roughly 90% of the planet, while low-Mars-orbit nodes add high-rate surface links and compute capacity where demand grows.

Comment
Correspondence: Maleeha Masood (maleeha2@illinois.edu)

Closest papers

Nearest neighbours by meaning across the whole index.

MarsLab: A Martian Rover Simulator for Planetary Rover Autonomous Navigation

cs.RO ·2026-09-28 ·Hoyun Kim, Beomsu Kim, Giseop Kim
publishedcode/data similarity 0.68
Abstract · 8 pages, 11 figures. Accepted for publication at the 2026 International Conference on Space Robotics (iSpaRo)

Future Mars missions will require rover autonomy that can operate across unstructured terrain, changing illumination, atmospheric dust, and limited communication. Simulation is a practical way to study these conditions before deployment, but existing Mars-relevant resources differ in scope, including mission-oriented simulators, fixed analog datasets, task-specific environments, and open robotics interfaces. In this context, we present MarsLab, an open-source, ROS2-native Mars rover simulator for autonomy and navigation algorithm development. MarsLab combines HiRISE-derived and procedural terrain with customizable rock, crater, solar-illumination, and atmospheric-dust settings, and runs a Perseverance-class rover model in NVIDIA Isaac Sim. The runtime publishes RGB, depth, RGB-D point clouds, LiDAR, IMU, wheel odometry, and Ground Truth (GT) pose data through standard ROS2 topics. We demonstrate MarsLab with Simultaneous Localization and Mapping (SLAM) benchmarks across sensing modalities, dust levels, scene geometry, and route length, and with Visual Place Recognition (VPR) benchmarks over repeated Mars Base traversals under illumination and dust changes. The results illustrate how controlled scene variation and shared GT trajectories can be used to compare trajectory-level estimation and image-level place recognition within the same simulator. Our Project Page: https://kimhoyun-robotair.github.io/MarsLab/.

0.33

SKiD-SLAM: Resource-Aware Distributed Multi-Robot LiDAR SLAM for Planetary Missions with Field Deployments at Analog Sites

cs.RO ·2026-10-28 ·Hogyun Kim, Juwon Kim, Dongjin Cho, Jiwon Choi, Geonmo Yang +5 more
top venuesurveycode/data similarity 0.64
Abstract · 31 pages. Published in IEEE Transactions on Field Robotics. Code and field data: https://sparolab.github.io/research/skid_slam/

Future planetary exploration missions require teams of robots to collaboratively map unknown environments under severe communication limits, constrained onboard computation, and no central infrastructure. In this field report, we present SKiD-SLAM, a distributed multi-robot LiDAR simultaneous localization and mapping (SLAM) system for such environments, and report its deployment across two mission concepts: cave exploration and scientific surface exploration. We survey the communication and computation budgets of actual planetary missions and select modules that fit these budgets for inter-robot place recognition, relative pose estimation, and distributed trajectory fusion. Before field deployment, we verify the assembled system on public datasets resembling planetary environments and in a simulator built on NASA JPL's Open Source Rover. We then validate SKiD-SLAM through field deployments in South Korea: a team of wheeled rovers explores the Majang lava-tube cave on Jeju Island, and quadruped robots carry out a crater-and-rock science scenario on a planetary analog terrain at the Korea Institute of Civil Engineering and Building Technology (KICT) in Yeoncheon. Across both deployments, SKiD-SLAM reliably performed distributed multi-robot LiDAR SLAM within a 250 kbps inter-robot communication budget, demonstrating its feasibility under challenging field conditions. Supplementary materials, including code and field data, are available at https://sparolab.github.io/research/skid_slam/.

0.54

AI Infrastructure in Space: How Far Can We Go?

cs.DC ·2026-08-21 ·Qing Li, Qiyang Zhang, Daliang Xu, Tianze Huang, Dingge Zhang +8 more
similarity 0.63
Abstract · 20 pages, 4 figures

Satellites are becoming programmable computing platforms capable of running increasingly demanding AI workloads. This shift raises a systems problem: how can AI services remain deployable, manageable, and recoverable after launch when compute capacity, connectivity, energy, and thermal headroom vary over orbital time? This paper develops a systems vision for AI infrastructure in space. We define it as the systems layer that manages AI capabilities across spacecraft, orbital networks, ground stations, and cloud backends, while treating orbital and physical state as part of the resource model. We synthesize relevant foundations from terrestrial AI infrastructure, satellite networking, and satellite edge computing, and examine the physical constraints that directly shape system design. We further ground this vision in three in-orbit case studies spanning the node, platform, and service levels. Telemetry from BUPT-1 satellite shows that usable compute capacity is bounded by thermal and energy envelopes. SateLight on BUPT-2 satellite reduces application-update transmission latency by 56.54% on average and up to 91.18%, with 100% update correctness. A stateful VLM serving case further shows that thermal interruptions make execution-state recovery a first-class systems problem. These observations motivate a research agenda for space-native resource management, lifecycle support, and sustained AI service across space and ground.

0.16

Simulation for Planetary Robotic Perception and Autonomy: A Concise Survey of Recent Capabilities and Gaps

cs.RO ·2026-09-28 ·Hoyun Kim, Giseop Kim
publishedsurvey similarity 0.60
Abstract · 8 pages, 5 figures, 3 tables. Accepted for publication at the 2026 International Conference on Space Robotics (iSpaRo)

Planetary robotics is an important enabler of scientific exploration in environments where direct human-in-the-loop operation is costly, hazardous, or infeasible. However, developing and validating planetary robotic systems remains difficult because representative field testing is expensive, limited, and often unrepeatable under mission-relevant conditions. In this setting, simulation serves as a central tool for perception and autonomy research, synthetic data generation, system integration, and pre-deployment evaluation. Despite its importance, the literature on planetary robotics simulation remains dispersed across different simulation engines, implementations, and application settings. This paper surveys simulation works for planetary robotic perception and autonomy across four practical axes: Openness and Availability, Scenario and Platform Coverage, Sensor and Perception Support, and Environmental and Operational Realism. The surveyed simulation works report visual or physical fidelity and support perception-oriented workflows. They also indicate uneven public availability, rover-centered coverage, partial support for specialized sensing modalities, and uneven reporting of operational constraints such as onboard computation, energy, and communication restrictions.

0.38

SatNav: A Scalable Benchmark for Long-Horizon UAV Vision-Language Navigation from Satellite Imagery

cs.CV cs.RO ·2026-09-25 ·Jiajun Jiang, Chunliang Hua, Zichun Chen, Yanxing Wu, Zeyuan Yang +2 more
top venuebenchmarkcode/data similarity 0.60
Abstract · Accepted at NeurIPS 2026, Track on Evaluations and Datasets. 32 pages, 16 figures. Project page: https://eku127.github.io/SatNav/

Urban uncrewed aerial vehicle (UAV) vision-language navigation (VLN) requires agents to follow instructions across extended urban spaces, inherently demanding long-term memory and geospatial grounding. However, scaling existing benchmarks remains difficult because of their reliance on costly reconstructed 3D assets, limiting geographic diversity and episode scale. To address this, we introduce SatNav, a scalable, long-horizon UAV VLN benchmark built from high-resolution satellite imagery. SatNav targets city-level navigation missions and uses satellite crops as approximations of UAV nadir views for visual observations. Through an automated cue-to-episode pipeline, SatNav constructs 118K episodes from 59 scenes across 18 cities, with an average trajectory length of 379 m. To stress-test long-horizon memory and geospatial reasoning, SatNav defines three task families: Boundary, Landmark, and Route, targeting loop progress tracking, landmark-based spatial grounding, and route following with counting cues. Benchmarking classical VLN agents and recent agents based on large vision-language models (LVLMs) on SatNav shows that city-scale navigation remains challenging. We further introduce SwiftVLN, a modular framework with switchable memory components, and conduct systematic memory-design ablations. Finally, satellite-to-UAV transfer experiments show that satellite-trained navigation models can operate on real-flight UAV observations, showing the practical relevance of SatNav. Our project page: https://eku127.github.io/SatNav/

0.69

Beyond Memory Limits: A Hierarchical Spatio-Temporal Map Representation for Large-Scale 3D Autonomous Exploration

cs.RO ·2026-11-08 ·Yizhe Zhang, Jianping Li, Yilun Gao, Liangliang Yin, Pengfei Wan +1 more
similarity 0.59
Abstract · 16 pages, 12 figures, preprint submitted to Elsevier

Autonomous UAV exploration is increasingly used for large-scale surveying and inspection in inaccessible or disaster-affected environments, where onboard memory and computational resources are often severely constrained. Most existing UAV exploration systems maintain globally queryable geometric map representations for motion planning and exploration decision-making, causing memory consumption and spatial-query costs to increase with the explored area. Robot-centric local mapping bounds dense-map memory and computation but discards global task context needed for long-horizon exploration.We present FLAVOR, a hierarchical spatio-temporal framework that confines dense metric geometry to a robot-centric local map while retaining compact global observation and task context. At the observation level, lightweight LiDAR-keyframe visibility records preserve ray-wise evidence for frontier reasoning. At the task level, unresolved frontiers beyond the local-map extent are retained as compact pending tasks associated with odometry anchors. A sparse topological graph connects these anchors through retained routes for future revisits.Upon returning to a task region, FLAVOR reconstructs the frontier and exploration viewpoint from observations, while the topological route is instantiated and validated against the current local map before execution. Dense-map capacity remains fixed as exploration expands, with exploration-dependent memory growth confined to compact observation and task context.FLAVOR achieves 31.98--41.88% shorter exploration time and a 94--99% smaller map memory footprint than the best baseline that completes all three simulated scenes. In real-world deployments, it reduces this footprint by 92.67% in the forest and 62.42% at the construction site relative to an explicit point-cloud ikd-tree while preserving long-term task continuity under constrained onboard resources.

0.17

Mining beyond Earth with Space Robots: Exploration, Sampling, and Extraction

cs.RO ·2026-08-21 ·Dong Li, Dujun Nie, Xiaotong Zhang, Ruilin Wang, Yuchen Li +9 more
surveycode/data similarity 0.59
Abstract

Space resource acquisition and utilization, commonly referred to as Space Mining, represent critical pathways for enabling sustained human exploration and unlocking commercial opportunities in space. These resources mainly include helium-3, water, mineral resources on the Moon and Mars, and abundant mineral deposits on asteroids. Due to the harsh conditions of space, communication delays, and high launch costs, the development of autonomous robotic systems is critical to achieving efficient, cost-effective space mining. This paper provides a comprehensive overview of space mining robotics and associated technologies. First, we review the background of space mining, including international policies, commercial entities, and recent advancements. We define a systematic six-stage architecture for space mining: Exploration is initiated by (1) remote sensing for target identification and (2) precise in situ robotic detection; Sampling progresses from (3) single-robot small-scale sampling to (4) multi-robot large-scale excavation; and Extraction integrates (5) autonomous resource extraction and (6) final integration into in situ construction or terrestrial transport. Additionally, we review and curate existing resources for space mining research, including real-world mission data, terrestrial analog datasets, and high-fidelity simulation environments. Finally, we identify critical open challenges in autonomous space mining and delineate a strategic research roadmap to bridge current technological gaps, fostering the transition toward a sustainable off-world economy. To track ongoing developments in space mining, we maintain an updated project page: https://github.com/OpenSpace-Lab/Space-Mining-with-Robotics-List.

0.54

LEAP-NBV: Lightweight Edge Active-Perception for Foundation-Model Next-Best-View Planning

cs.AI ·2026-09-21 ·Boxun Hu, Jiawei Ge, Axel Krieger, Peng Wang, Tinoosh Mohsenin
benchmark similarity 0.58
Abstract

Foundation models are endowing autonomous systems with greater intelligence, enabling a more comprehensive understanding of the environment through visual perception. A representative example is Human Mesh Recovery (HMR), which provides useful estimates of a target's 3D pose and shape that can benefit tactical missions. However, the size and power demands of such models make them difficult to run on edge platforms and limit their real-time performance, undermining the requirements of tactical edge deployment - especially for active perception, where a mobile robot must plan its next-best view on-board and cannot offload computation under contested communications. We present LEAP-NBV, a lightweight active-perception framework that runs foundation-model-driven Next-Best-View (NBV) planning on-board an edge device. To this end, we distill a family of large HMR teachers, each into a compact 32M student, with an offline mesh objective, then quantize the vision encoder to FP16 and characterize its on-device accuracy and latency. Within an occlusion-aware active perception loop, we evaluate all configurations on the same held-out benchmark and deploy the end-to-end pipeline on an NVIDIA Jetson Xavier NX, reporting measured on-device latency and energy. Distillation recovers 6-7 mm of Procrustes-aligned mean per-vertex position error (PA-MPVPE) over the undistilled student on the test set. Selecting the edge-optimal compression model brings the HMR engine to ~12 ms at a small accuracy cost and runs the full closed loop at 3.6 FPS and 2.6 J per frame, achieving a 2.0x speedup and 3.0x lower energy than the uncompressed model while nearly matching downstream task quality.

0.27