CS Paper Radar

SKiD-SLAM: Resource-Aware Distributed Multi-Robot LiDAR SLAM for Planetary Missions with Field Deployments at Analog Sites

Hogyun Kim, Juwon Kim, Dongjin Cho, Jiwon Choi, Geonmo Yang, Seokhwan Jeong, Jiyun Lee, Miryeong Park, Hyungtae Lim, Younggun Cho

cs.RO ·submitted 2026-10-28 01:24 UTC · v1
top venuesurveycode/data

Abstract

Future planetary exploration missions require teams of robots to collaboratively map unknown environments under severe communication limits, constrained onboard computation, and no central infrastructure. In this field report, we present SKiD-SLAM, a distributed multi-robot LiDAR simultaneous localization and mapping (SLAM) system for such environments, and report its deployment across two mission concepts: cave exploration and scientific surface exploration. We survey the communication and computation budgets of actual planetary missions and select modules that fit these budgets for inter-robot place recognition, relative pose estimation, and distributed trajectory fusion. Before field deployment, we verify the assembled system on public datasets resembling planetary environments and in a simulator built on NASA JPL's Open Source Rover. We then validate SKiD-SLAM through field deployments in South Korea: a team of wheeled rovers explores the Majang lava-tube cave on Jeju Island, and quadruped robots carry out a crater-and-rock science scenario on a planetary analog terrain at the Korea Institute of Civil Engineering and Building Technology (KICT) in Yeoncheon. Across both deployments, SKiD-SLAM reliably performed distributed multi-robot LiDAR SLAM within a 250 kbps inter-robot communication budget, demonstrating its feasibility under challenging field conditions. Supplementary materials, including code and field data, are available at https://sparolab.github.io/research/skid_slam/.

Comment
31 pages. Published in IEEE Transactions on Field Robotics. Code and field data: https://sparolab.github.io/research/skid_slam/
Journal ref
IEEE Transactions on Field Robotics, vol. 3, pp. 813-841, 2026
DOI
10.1109/TFR.2026.3721725

Closest papers

Nearest neighbours by meaning across the whole index.

MarsLab: A Martian Rover Simulator for Planetary Rover Autonomous Navigation

cs.RO ·2026-09-28 ·Hoyun Kim, Beomsu Kim, Giseop Kim
publishedcode/data similarity 0.68
Abstract · 8 pages, 11 figures. Accepted for publication at the 2026 International Conference on Space Robotics (iSpaRo)

Future Mars missions will require rover autonomy that can operate across unstructured terrain, changing illumination, atmospheric dust, and limited communication. Simulation is a practical way to study these conditions before deployment, but existing Mars-relevant resources differ in scope, including mission-oriented simulators, fixed analog datasets, task-specific environments, and open robotics interfaces. In this context, we present MarsLab, an open-source, ROS2-native Mars rover simulator for autonomy and navigation algorithm development. MarsLab combines HiRISE-derived and procedural terrain with customizable rock, crater, solar-illumination, and atmospheric-dust settings, and runs a Perseverance-class rover model in NVIDIA Isaac Sim. The runtime publishes RGB, depth, RGB-D point clouds, LiDAR, IMU, wheel odometry, and Ground Truth (GT) pose data through standard ROS2 topics. We demonstrate MarsLab with Simultaneous Localization and Mapping (SLAM) benchmarks across sensing modalities, dust levels, scene geometry, and route length, and with Visual Place Recognition (VPR) benchmarks over repeated Mars Base traversals under illumination and dust changes. The results illustrate how controlled scene variation and shared GT trajectories can be used to compare trajectory-level estimation and image-level place recognition within the same simulator. Our Project Page: https://kimhoyun-robotair.github.io/MarsLab/.

0.33

SE(3)-LIVOM: Adaptive Multi-LiDAR-Inertial-Visual Odometry and Mapping

cs.RO ·2026-11-17 ·Gunhee Shin, Seungjae Lee, Daebeom Kim, Seoyeon Jang, Hyun Myung
publishedcode/data similarity 0.67
Abstract · 3 pages, 2 figures, 2 tables. Overall winner of the COMFORT Challenge, IROS 2026 Workshop on Data in Field Robotics. Code: https://github.co…

This paper presents SE(3)-LIVOM, the overall winner of the COMFORT Challenge at IROS 2026. The challenge asks for the trajectory of a legged robot in the GrandTour dataset, whose scenes include collapsed buildings, construction sites and snowfields. SE(3)-LIVOM runs in real time on two LiDARs, one camera and an IMU. Its frontend extends SE(3)-LIO to multiple LiDARs and a camera. Adaptive downsampling keeps the time per scan near 35 ms within and across scenes. An online backend corrects drift with a plane bundle adjustment over submaps and an incremental pose graph. With a single configuration for all scenes, the system reaches an average ATE of 1.40 cm on the six test scenes. The code is available at https://github.com/url-kaist/se3-livom-comfort.

0.67

One year in a forest: Analyzing the challenges of autonomous navigation in subarctic environments

cs.RO ·2026-08-27 ·Matěj Boxan, Nicolas Lauzon, Veronica Vannini, Mathis Turgeon-Roy, François Pomerleau
hot direction similarity 0.65
Abstract

Subarctic regions have the potential to see increased deployment of autonomous robots in applications including forestry, mining, and environmental monitoring. In these conditions, an autonomous system's reliance on GNSS or cloud computing is precarious due to dense tree canopies and atmospheric attenuation, necessitating onboard sensing and data processing. However, established exteroceptive modalities, including cameras, lidars, and radars, are typically evaluated in structured urban settings or in environments that lack significant seasonal variations. To address this, we present a field report on a year-long deployment of a mobile robot in a subarctic boreal forest. We evaluate 64 km of data using nine odometry, localization, and mapping methods and assess their performance across seasonal changes. The performed experiments suggest that the environment changes significantly hinder the performance of state-of-the-art techniques, which show increased fragility when subject to conditions characterized by self-similar scenes or tall snowbanks. Additionally, complex Simultaneous Localization and Mapping (SLAM) algorithms offer limited accuracy gains over a proprioceptive baseline while significantly increasing system fragility. Furthermore, by correlating the position drift with features and confidence weight distribution, we show that visual-based SLAM methods are particularly affected by the seasonal changes. Additionally, we investigate the task of cross-season localization in a prior map. While lidar-based methods successfully completed localization runs between seasons, radar and visual methods are prone to failure due to a few matching features between runs, even within the same season. Finally, we detail the challenges and lessons learned from this year-long trial, including a multi-season Teach and Repeat (T&R) evaluation using both radar and lidar-based pipelines.

0.49

Terrain-Aware Autonomous Planetary Exploration for Exteroceptive-Proprioceptive Mapping with Quadruped Scouts

cs.RO ·2026-09-28 ·Alberto Sanchez-Delgado, João Carlos Virgolino Soares, Victor Barasuol, Claudio Semini
published similarity 0.65
Abstract · Accepted to the International Conference on Space Robotics (iSpaRo 2026)

Autonomous planetary exploration requires robots to navigate unknown, uneven terrain while assessing risk, traversability, and energetic cost. Quadruped scouts are well suited for this task because they can traverse irregular surfaces and gather mobility-relevant information during locomotion. This paper presents a terrain-aware exploration framework that combines exteroceptive and proprioceptive mapping for a quadruped robot in lunar-like environments. An onboard RGB-D camera builds robot-centered elevation maps, estimates geometric traversability, and derives navigation costs for autonomous planning. In parallel, proprioceptive measurements provide interaction-aware terrain cues that complement geometry-based assessment. Local maps are incrementally registered into a global multi-layer representation, which is used by an exploration module to select targets in unexplored regions of interest. The targets are reached by an autonomous navigation system that guides collision-aware motion using the available map and cost layers. Simulation results on NVIDIA Isaac Sim show autonomous exploration, map expansion, and spatial association between terrain geometry and robot-terrain interaction. Subsequent navigation using this information exhibits lower average Cost of Transport (CoT) than initial exploration.

0.22

Distributed Relative Localization for Homogeneous Multi-Robot Systems through UWB Ranging and Limited Communications

cs.RO ·2026-10-08 ·Zhiqiang Cao, Ran Liu, Billy Pik Lik Lau, Chau Yuen, U-Xuan Tan
top venue similarity 0.65
Abstract · This paper has been published in IEEE/ASME Transactions on Mechatronics

Accurate and reliable relative localization is crucial for multi-robot applications like exploration, search, and rescue missions. LiDAR-based solutions offer high accuracy in localizing surrounding objects; however, distinguishing homogeneous robots with similar appearances remains challenging due to the lack of distinctive identification features. In this paper, we propose a fully distributed relative pose estimation approach by integrating LiDAR, UWB, and odometry measurements, allowing each robot to accurately and continuously localize its teammates without external infrastructure. Specifically, potential anonymous teammate robot clusters from LiDAR scans are tracked by a dynamic tracker. We then identify teammate robots from these tracked anonymous clusters using a joint matching strategy, ensuring reliable data association between robots and clusters. Finally, by combining the corresponding LiDAR observations, UWB ranging, and odometry measurements, each robot precisely localizes others while minimizing data exchange. The system requires only odometry data exchange through onboard UWB, eliminating the need for additional communication infrastructure like WiFi routers or mesh networks. Extensive simulation and real-world experiments demonstrate the effectiveness and reliability of the proposed relative localization approach.

0.38

Simulation for Planetary Robotic Perception and Autonomy: A Concise Survey of Recent Capabilities and Gaps

cs.RO ·2026-09-28 ·Hoyun Kim, Giseop Kim
publishedsurvey similarity 0.64
Abstract · 8 pages, 5 figures, 3 tables. Accepted for publication at the 2026 International Conference on Space Robotics (iSpaRo)

Planetary robotics is an important enabler of scientific exploration in environments where direct human-in-the-loop operation is costly, hazardous, or infeasible. However, developing and validating planetary robotic systems remains difficult because representative field testing is expensive, limited, and often unrepeatable under mission-relevant conditions. In this setting, simulation serves as a central tool for perception and autonomy research, synthetic data generation, system integration, and pre-deployment evaluation. Despite its importance, the literature on planetary robotics simulation remains dispersed across different simulation engines, implementations, and application settings. This paper surveys simulation works for planetary robotic perception and autonomy across four practical axes: Openness and Availability, Scenario and Platform Coverage, Sensor and Perception Support, and Environmental and Operational Realism. The surveyed simulation works report visual or physical fidelity and support perception-oriented workflows. They also indicate uneven public availability, rover-centered coverage, partial support for specialized sensing modalities, and uneven reporting of operational constraints such as onboard computation, energy, and communication restrictions.

0.38

Bandwidth, Latency, and 400 Million Kilometers: The Case for Mars-Local Compute

cs.DC cs.NI ·2026-09-25 ·Maleeha Masood, Indranil Gupta, Deepak Vasisht
hot direction similarity 0.64
Abstract · Correspondence: Maleeha Masood (maleeha2@illinois.edu)

There have been recent proposals for human settlements on Mars in 2030s. Any human activity on Mars must be preceded by extensive robotic exploration. However, Mars exploration is bottlenecked by the low bandwidth, intermittent Mars-Earth link. For example, HiRISE, a high-resolution camera onboard the Martian orbiter MRO imaged less than 3% of Mars over eleven years, even though MRO's low resolution Context Camera had mapped more than 99% of Mars in that time. We present a systems case for shared compute for Mars exploration. Such Mars-local compute, paired with advances in computer vision and AI, can enable large volumes of data to be collected and processed on Mars while sending periodic updates, insights, and selective datasets to Earth. To overcome the lack of surface infrastructure on Mars, we propose a two-tier in-orbit deployment of computational satellites that provides consistent coverage and bandwidth. Our analysis shows that the proposed deployment can start small: one areostationary node makes compute reachable from all active Mars missions, two additional areostationary nodes can extend this coverage to roughly 90% of the planet, while low-Mars-orbit nodes add high-rate surface links and compute capacity where demand grows.

0.34

Chain-SLAM: Globally Consistent Backend for Multi-Session LiDAR SLAM via Chained Loop Closure

cs.RO ·2026-09-10 ·Zhiheng Li, Xinhao Liu, Juexiao Zhang, Yongqing Liang, Chen Feng
published similarity 0.63
Abstract · Accepted to IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2026. 8 pages, 6 figures

Maintaining consistency over long spatial and temporal horizons remains a fundamental challenge in large-scale LiDAR SLAM, particularly when integrating maps collected across multiple sessions. We present Chain-SLAM, a LiDAR SLAM backend enabling online multi-session map alignment and reuse with global consistency at large scale. We implement a chained loop closure mechanism that efficiently propagates geometric constraints across inter-session keyframes through an adjacency graph, enabling robust long-horizon consistency triggered by reliable short-horizon loop closures. The system initializes inter-session alignment with GNSS-proximity place recognition, then performs on-the-fly loop closure detections and joint optimization of loaded maps and newly acquired trajectories within a unified factor graph, maintaining both inter- and intra-session geometric consistency without dynamic object removal, and cross-platform robustness with minimal hyperparameter tuning. Experimental results show improved trajectory accuracy and robust multi-session integration on large-scale datasets. We release our source code to support reproducible research in large-scale multi-session LiDAR SLAM. Project site: https://ai4ce.github.io/Chain-SLAM/

0.46