CS Paper Radar

Refresh or Realize? Compute Allocation in Drifting Models

Sipeng Chen, Xu Zheng, Shibo Li

cs.LG ·submitted 2026-09-26 06:42 UTC · v1

Abstract

Drifting Models train a one-step generator by recomputing a finite-sample drift field at every iteration and taking an optimizer step toward the drifted target. The field says how generated samples should move, but the step is taken in parameters shared by all samples, so the motion the network actually makes need not match the motion it was given. This leaves a basic training question open: should extra compute go into fitting the current target more closely, or into recomputing the field? We study it on ImageNet 256x256. Holding the target fixed for k optimizer steps and measuring the realized displacement, we find that deeper fitting does bring the network closer to the frozen target, and that the number of steps needed before it makes any net progress drops from about sixteen early in training to one later on. When the extra steps come for free, k=2 also lowers FID. Once they are paid for, the result flips: at approximately matched measured wall-clock, spending the budget on fresh fields gives lower FID than deeper fitting, on both training seeds. The target itself shows why a fresh field is worth so much. Redrawing the finite support rotates its direction far more than a parameter update does (cosine ~0.3-0.6 against ~0.95), and a correction that is optimal in field space is not reliably better in FID than a parameter-free one. For Drifting, fitting each target well and spending compute well are different goals.

Comment
20pages

Closest papers

Nearest neighbours by meaning across the whole index.

Scout-Refine-Correct: Teaching Flow Models to Refine Their Own Samples

cs.CV ·2026-10-30 ·Sergey Karpukhin, Aibek Alanov
similarity 0.66
Abstract · preprint

The quality of image generation models trained with diffusion or flow matching is largely fixed by the training budget: at inference, the only available lever is the number of sampling steps, and additional steps improve quality only up to a point. We present a training recipe, Scout-Refine-Correct (SRC), that instead gives a flow-matching generator a genuine inference-time refinement capability. At each sampling step the model takes a scout rollout -- $K$ steps ahead along its own trajectory -- extrapolates a full-sample estimate, and feeds that estimate back to itself as a self-conditioning signal before taking the real step. This can be repeated for $R$ refinement rounds. Two correction losses, applied during training at states the model's own rollouts actually reach rather than only on the ground-truth path, teach the model to use this signal to reach new samples instead of collapsing to a suboptimal one. On ImageNet-256, SRC improves LightningDiT-B from FID~14.5 to FID~7.26 at NFE~550, matching a privileged best-of-$N$ baseline that uses an oracle FID verifier to choose among samples. SRC uses no external verifier, no reward signal, and, after ablation, almost no extra parameters over the base architecture. Combining SRC with best-of-$N$ improves the result further, to FID~3.81 at NFE~4400, showing that the two axes are complementary. We ablate the main design choices -- the architectural pathway for the scout signal, the scout horizon, each correction loss, and the training schedule to demonstrate key working components of training.

0.13

Freeze What Is Settled, Cache What Is Smooth: Spatial Freezing Keeps Step Caching in Its Low-Error Regime

cs.CV cs.LGcs.MM ·2026-10-25 ·Baiyan Li, Ganxuan Yang
similarity 0.60
Abstract · 10 pages, 7 figures

Instruction-based image editors built on diffusion transformers run tens of denoising steps. Training-free acceleration either reuses features across steps (step caching) or stops computing the regions an edit leaves untouched (region freezing), and the two have been combined before. We ask how a high speed-up target should be split between them. On Qwen-Image-2.1, freezing does more than remove tokens: it lowers the cost of every step, so the step cache can reach the same overall speed-up with a conservative threshold that keeps its error small. A per-step cost model fitted on development runs predicts held-out latency with a median error of 4.0% and reproduces the speed ceilings of the region methods we re-implemented (2.73$\times$ predicted vs. 2.70$\times$ measured for RegionE). Driving frozen tokens to the model's one-step $x_0$ estimate beats returning them to the reference image on every development sample, and in 90% of measured cases the composed error stays below the sum of the two individual errors. The resulting method, FreezePlan, keeps five full steps and gives the rest of the budget to TaylorSeer. On a pre-registered test split it runs 5.05$\times$ faster end to end at 29.8 dB PSNR to the original output, with no significant drop in a VLM judge score; TaylorSeer at 5.02$\times$ reaches 23.5 dB. The curve extends to 5.99$\times$ at 28.0 dB. Swapping in the region selectors of prior methods under our schedule lowers median PSNR by only 0.5--0.6 dB, which places the gain in the schedule and budget split rather than in the selector.

0.21

When to Retrain: An Empirical Study of Retraining Policies for Streaming ML Under Concept Drift, Budget, and Latency Constraints

cs.LG ·2026-08-19 ·Sawan Dasari
code/data similarity 0.59
Abstract · 16 pages, 7 figures, 7 tables. Code and data: https://github.com/sa1dasari/Study-of-Drift-Triggered-Retraining-Policies-Under-Budget-and-Lat…

Production machine learning systems degrade under concept drift, yet practitioners have little principled guidance on when to retrain. Retraining is costly, retraining budgets are finite, and a retrained model does not take effect instantly: training and deployment latency leave a stale model serving predictions while the data continues to move. We present a controlled empirical study of three practical model-refresh policies (periodic retraining, error-threshold triggering, and statistical drift-triggered retraining with ADWIN) against a no-retrain baseline, evaluated under a unified system model that makes retraining budgets and training-plus-deployment latency explicit. Across 3,933 experiment runs spanning three drift regimes, three budget levels, up to five latency levels, three datasets, and two learning modes, we find that the single most consequential design decision is not the retraining policy but whether the deployed model learns incrementally. With per-sample incremental updates, and for the linear online learner with immediate labels studied here, no policy differs from the no-retrain baseline by a practically significant margin in any of 54 paired comparisons, even at extreme latency. Without incremental updates, policy choice separates outcomes by 15-55 percentage points of post-drift accuracy, and simple periodic retraining significantly outperforms both reactive policies under abrupt and gradual drift, while reactive policies retain an advantage only under recurring drift. We document systematic failure modes of reactive policies and a latency-budget queueing interaction that silently halves effective retraining budgets, and release the full simulator, dataset pipelines, and per-run artifacts for reproducibility.

0.52

Cache or Denoise Less? Residual Reuse in a Flow-Matching World Action Model

cs.RO cs.AIcs.CVcs.LG ·2026-11-15 ·Abhinav Gupta, Nissan Pow
code/data similarity 0.58
Abstract · Honorable Mention at the CoRL 2026 Workshop on Efficient Foundation Models for Real-Time Embodied AI (EEAI). Code and data available at http…

Flow-matching robot policies generate each action chunk through repeated network evaluations, one per denoising step. Cross-cycle caches such as C$^3$ache reuse computation from earlier replanning calls, but whether they beat simply taking fewer steps is unclear. We compare the two in Fast-WAM, a 6B-parameter world action model, on LIBERO-Goal. Two uncached steps keep the success of ten: on all 500 initial states they are non-inferior within two percentage points, for one checkpoint and noise seed. Under PyTorch's default compile mode, they also cut a replanning call on an RTX A6000 from 202 to 92 ms. This leaves little room for caching. A cache that keeps two fresh steps cannot be faster than two uncached steps: every call still encodes the images, runs the video expert and computes those two steps. Caching the first of two steps, refreshed every fourth call, saves at most 11--14% of a call by our cost model. Cached policies are also fragile. Their losses tracked the share of the flow path the cached steps cover: under Fast-WAM's current time shift, C$^3$ache's eight cached steps cover 80% of the path instead of 44%, and the cached policy succeeds on 63% of states against 95% uncached. Resampling the noise on every call cost caches covering 60% or more of the path 14--40 points. These results argue for fewer-step baselines and for testing reuse under the deployed sampler and noise settings. We release our evaluation harness, logs and a checklist.

0.36

Drift Says When, Budget Says How Much: Rate-Controlled KV Re-selection for Long-Form Multimodal Generation

cs.LG ·2026-10-22 ·Bin Hu, Yingbo Xiao
similarity 0.58
Abstract · 17 pages, 7 figures, 13 tables

KV cache compression for multimodal LLMs usually selects the visual tokens to keep once, at prefill, and reuses that selection for the whole generation. We show that this one-shot selection is severely limited on long-form generation: on detailed image description, even an oracle that selects with the attention of the uncompressed answer reaches only 0.44-0.52 ROUGE-L agreement with the uncompressed output, because the evidence the model reads moves as the description unfolds. Re-selecting whenever attention drifts out of the kept set is the natural remedy, but we find that a fixed drift threshold fails systematically: drift magnitudes are not comparable across samples, so low-drift samples are almost never refreshed although they benefit the most. We propose Rate-Controlled Refresh (RCR), which lets drift decide when and where to re-select while a per-sample controller regulates how often, combined with a low-rank drift detector, candidate-restricted re-selection, and a decision that stays on the GPU. With one setting for all models and tasks, RCR outperforms the per-step retrieval method InfiniGen by 1.6-3.8 ROUGE-L points on five of six model-task settings with no significant difference on the sixth, while staying within 1.7 points of exact per-step re-selection, with comparable estimated data movement per step and a 4x smaller GPU-resident detector. On DetailCaps, drift-chosen timing beats random timing at the same refresh rate and periodic timing even at a higher rate, by 2.0-5.0 points. On pre-registered video description, where drift is homogeneous across samples, RCR is on par with InfiniGen on Qwen2-VL and exceeds it on Qwen3-VL but no longer beats a fixed threshold at the nearest tested rates, consistent with the diagnosis; object-level evaluation shows that RCR achieves higher object F1 against the uncompressed output than InfiniGen on two of three models.

0.13

Velocity Scaling in Flow Matching

cs.CV ·2026-10-07 ·Youssef Saied, François Fleuret
similarity 0.57
Abstract · 41 pages, including appendix

Scaling a learned flow-matching velocity field $v_θ$ by a gain $γ(t)$ was recently shown to greatly improve generation quality. Prior work argued that velocity fields trained with mean-squared error (MSE) systematically underestimate velocity magnitude and that scaling corrects this error. We show that MSE training does not create a velocity-magnitude deficit. We find instead that velocity scaling reduces population time lag: sampled states at model time $t$ resemble training states from an earlier time. Velocity scaling and moving model time back are two ways to address this population time lag. Across architectures and model sizes, measuring population time lag and using it to select a gain greatly improves generation quality, reducing FID from 28.0 to 12.2 (estimated by linear interpolation between FID measurements at neighboring gains) on ImageNet-256 at NFE 25 without guidance.

0.23

SoftCache: Adaptive Step Size Caching for Diffusion Transformers

cs.CV ·2026-10-15 ·Shimon Malnick, Nadav Orenstein, Ohad Fried, Shai Avidan
code/data similarity 0.55
Abstract · Project page: https://malnick.net/softcache

Diffusion and flow models generate a sample over iterative steps, each a full pass through a large network, and that pass dominates generation cost. Training-free caching accelerates them by reusing activations from recent evaluations instead of recomputing them. Dynamic caching methods decide when to refresh by accumulating a cheap probe of the network input into a staleness signal and spending a fresh evaluation once it crosses a threshold. They perform hard caching: the signal is a binary switch between refresh and reuse, and every step, fresh or cached, advances by the prescribed step size. We observe that the signal carries much more than this switch. How far it sits below the threshold, its headroom, predicts the error induced by reuse. We propose SoftCache, which performs soft caching: instead of a binary switch, the headroom sets how far each cached step goes. Where the headroom is large, the sampler jumps past several scheduled nodes, and as a refresh nears, its steps shrink back toward the original step. These adaptive jumps may land between the scheduled nodes, taking the sampler off its fixed grid. SoftCache requires no training and adds no per-backbone settings: on FLUX for images and on HunyuanVideo and Wan2.1 for video, at speedups from $3.5\times$ to $6.9\times$, it is ahead of every baseline on all four fidelity metrics.

0.20

Rethinking What to Cache in Few-Step Diffusion Transformers: Solver-Aware Target Selection

cs.CV cs.AI ·2026-10-02 ·Shuo Yang, Lihao Fang, Yi Zhang, Haixiang Wang, Xincheng Ye +3 more
code/data similarity 0.55
Abstract · 20 pages, 9 figures

Diffusion Transformers (DiTs) can generate high-quality images and videos, but generating each sample requires multiple costly DiT forward passes. Two common ways to accelerate DiT sampling are step distillation, which reduces the number of sampling steps, and caching, which skips some DiT evaluations by reusing a tensor computed at an earlier step. Most caching methods decide in advance which tensor to reuse. After distillation, adjacent sampling steps are farther apart. Reusing a tensor across this larger gap introduces more error, so choosing what to cache becomes especially important. We therefore introduce AutoTarget, a method that chooses the cached tensor for a given model, solver, and reuse schedule. AutoTarget uses a small set of runs without cache reuse to measure the error caused by reusing each candidate tensor, then selects the candidate with the lowest error. We also analyze how an error at one reuse step affects the final sample. For Euler sampling, we identify cache targets that produce the same trajectory and show why a stored solver update may not. Experiments on distilled image and video DiTs show that the best cache target changes with the model, image resolution, and solver. AutoTarget reduces DiT evaluations and retained cache storage. Generation quality remains close to the corresponding uncached run. On the tested PixArt-LCM and FLUX.1-schnell settings, its calibration ranking matches the ranking from held-out cached runs. To help others reproduce the method, we provide its core implementation on GitHub at https://github.com/wali1024-offical/AutoTarget.

0.46