CS Paper Radar

Freeze What Is Settled, Cache What Is Smooth: Spatial Freezing Keeps Step Caching in Its Low-Error Regime

Baiyan Li, Ganxuan Yang

cs.CV cs.LGcs.MM ·submitted 2026-10-25 09:13 UTC · v1

Abstract

Instruction-based image editors built on diffusion transformers run tens of denoising steps. Training-free acceleration either reuses features across steps (step caching) or stops computing the regions an edit leaves untouched (region freezing), and the two have been combined before. We ask how a high speed-up target should be split between them. On Qwen-Image-2.1, freezing does more than remove tokens: it lowers the cost of every step, so the step cache can reach the same overall speed-up with a conservative threshold that keeps its error small. A per-step cost model fitted on development runs predicts held-out latency with a median error of 4.0% and reproduces the speed ceilings of the region methods we re-implemented (2.73$\times$ predicted vs. 2.70$\times$ measured for RegionE). Driving frozen tokens to the model's one-step $x_0$ estimate beats returning them to the reference image on every development sample, and in 90% of measured cases the composed error stays below the sum of the two individual errors. The resulting method, FreezePlan, keeps five full steps and gives the rest of the budget to TaylorSeer. On a pre-registered test split it runs 5.05$\times$ faster end to end at 29.8 dB PSNR to the original output, with no significant drop in a VLM judge score; TaylorSeer at 5.02$\times$ reaches 23.5 dB. The curve extends to 5.99$\times$ at 28.0 dB. Swapping in the region selectors of prior methods under our schedule lowers median PSNR by only 0.5--0.6 dB, which places the gain in the schedule and budget split rather than in the selector.

Comment
10 pages, 7 figures

Closest papers

Nearest neighbours by meaning across the whole index.

What Should We Freeze? Guarded Freezing: Connectivity Shapes the Fine-Tuning of Pretrained Models

cs.LG ·2026-09-26 ·Leonel Aguilar
similarity 0.68
Abstract

When adapting pre-trained models through fine-tuning, freezing weights alone might not preserve performance, as updates elsewhere can change the inputs to the frozen core, ultimately affecting overall performance. We first analyse the case where a selected frozen core can be isolated and propose removal-value, a capacity-based score that approximates HOPE's removal cost averaged over removal orders. We show that in VGG-8, cutting paths from trainable neurons into a frozen core makes selection using this score useful: $70\%$ frozen preserves $5.22\pm0.51$ percentage points more old-task accuracy than DEFT at similar new-task accuracy. In transformers, shared residual streams leave paths into frozen neurons open. For this case, we derive drift-value, a forward-only proxy for the output disturbance from updating each weight entry under a local update model. In language models, at 40 epochs, this policy exceeds adapted Wanda and RIA freezing scores in settings with substantial retention loss, while its differences from Fisher remain unresolved. After 160 epochs on Qwen2.5-1.5B, it retains $0.0433\pm0.0102$ more than static Fisher. In DINOv3 vision-transformer adaptation to point clouds, drift-value retains $0.440$ image accuracy versus $0.187$ for a random mask of the same count. These results motivate Guarded Freezing: select by removal-value when incoming paths are cut, and by drift-value when they remain.

0.27

Cache or Denoise Less? Residual Reuse in a Flow-Matching World Action Model

cs.RO cs.AIcs.CVcs.LG ·2026-11-15 ·Abhinav Gupta, Nissan Pow
code/data similarity 0.63
Abstract · Honorable Mention at the CoRL 2026 Workshop on Efficient Foundation Models for Real-Time Embodied AI (EEAI). Code and data available at http…

Flow-matching robot policies generate each action chunk through repeated network evaluations, one per denoising step. Cross-cycle caches such as C$^3$ache reuse computation from earlier replanning calls, but whether they beat simply taking fewer steps is unclear. We compare the two in Fast-WAM, a 6B-parameter world action model, on LIBERO-Goal. Two uncached steps keep the success of ten: on all 500 initial states they are non-inferior within two percentage points, for one checkpoint and noise seed. Under PyTorch's default compile mode, they also cut a replanning call on an RTX A6000 from 202 to 92 ms. This leaves little room for caching. A cache that keeps two fresh steps cannot be faster than two uncached steps: every call still encodes the images, runs the video expert and computes those two steps. Caching the first of two steps, refreshed every fourth call, saves at most 11--14% of a call by our cost model. Cached policies are also fragile. Their losses tracked the share of the flow path the cached steps cover: under Fast-WAM's current time shift, C$^3$ache's eight cached steps cover 80% of the path instead of 44%, and the cached policy succeeds on 63% of states against 95% uncached. Resampling the noise on every call cost caches covering 60% or more of the path 14--40 points. These results argue for fewer-step baselines and for testing reuse under the deployed sampler and noise settings. We release our evaluation harness, logs and a checklist.

0.36

Text Lives in the Guidance: Preventing Silent Text Rewriting in Cached Diffusion Transformers

cs.CV ·2026-11-19 ·Kun Zhou, Wenmian Yang, Zhensheng Wang, Weijia Jia
similarity 0.63
Abstract

Diffusion transformers (DiTs) now render long, legible text in images, and feature caching is a standard way to accelerate them. Caches are judged by image-level metrics, which do not check whether the rendered text is still correct. We find that caching silently rewrites this text. On Z-Image, TaylorSeer at 2.9x fewer FLOPs lowers word accuracy from 62% to 46%, while ImageReward and CLIP Score barely change. Sampling with fewer steps at the same compute keeps almost all of this text, so the loss comes from how the cache predicts the skipped steps. Decomposing the cache error along classifier-free guidance (CFG), we trace this loss mainly to the guidance term, the difference between the conditional and unconditional predictions, which caches extrapolate worst on text. Correcting the guidance inside the text alone recovers most of the lost text. We therefore propose GuideCache, which recomputes both CFG branches only on the tokens with the largest predicted guidance error, using the guidance terms that the cache already stores. At 2.4x fewer FLOPs, GuideCache restores full-compute prompt fidelity on Z-Image and Qwen-Image, and on Z-Image it renders text as well as or better than ToCa, TeaCache, and FasterCache while staying much closer to the full model's output. GuideCache works with caches of any order, and on top of fewer sampling steps it keeps more text than step reduction at a higher speedup. These results suggest that acceleration methods for text-rendering models should be evaluated on the text they render.

0.27

Refresh or Realize? Compute Allocation in Drifting Models

cs.LG ·2026-09-26 ·Sipeng Chen, Xu Zheng, Shibo Li
similarity 0.60
Abstract · 20pages

Drifting Models train a one-step generator by recomputing a finite-sample drift field at every iteration and taking an optimizer step toward the drifted target. The field says how generated samples should move, but the step is taken in parameters shared by all samples, so the motion the network actually makes need not match the motion it was given. This leaves a basic training question open: should extra compute go into fitting the current target more closely, or into recomputing the field? We study it on ImageNet 256x256. Holding the target fixed for k optimizer steps and measuring the realized displacement, we find that deeper fitting does bring the network closer to the frozen target, and that the number of steps needed before it makes any net progress drops from about sixteen early in training to one later on. When the extra steps come for free, k=2 also lowers FID. Once they are paid for, the result flips: at approximately matched measured wall-clock, spending the budget on fresh fields gives lower FID than deeper fitting, on both training seeds. The target itself shows why a fresh field is worth so much. Redrawing the finite support rotates its direction far more than a parameter update does (cosine ~0.3-0.6 against ~0.95), and a correction that is optimal in field space is not reliably better in FID than a parameter-free one. For Drifting, fitting each target well and spending compute well are different goals.

0.28

DIFFLET: A Fast Inference Engine for Diffusion Transformer Models on AWS Trainium

cs.DC cs.LG ·2026-10-16 ·Bin Ma, Min Yu, Vijay Kodamalla, Johnny Liu, Da Li +1 more
similarity 0.59
Abstract

On AWS Trainium2, every component of a diffusion model runs as a program compiled ahead of time for fixed shapes, while pipelines differ across models, prompt lengths across requests, and caching decisions across denoising steps. We present Difflet, a serving engine in which five model pipelines share one compilation backend, joint attention is split across cores by attention head, and a host controller decides at each denoising step whether to run the denoiser or reuse its earlier output. A small probe program computes the caching signal on the device and returns one number per step, and a resident model process keeps every program loaded across requests. Across five image and video model families, fused attention accelerates denoiser steps by 1.2-4.3x over the same framework using PyTorch/XLA attention, and at 32.8k visual tokens it is the only attention that compiles. On four of the five models, resident serving is 1.5-3.4x faster than standalone runs that reload weights from a warm file cache for each generation.

0.28

From Local Mismatch to Global Impact: Optimizing Cache Reuse Policy for Efficient Diffusion

cs.AI cs.CVcs.LG ·2026-08-13 ·Xichen Ye, Yifan Wu, Zhikang Xie, Xiangyu Yue, Cheng Jin +1 more
theory similarity 0.59
Abstract

Diffusion models have achieved dominant performance in visual generation but suffer from substantial inference overhead. While cache-based acceleration has emerged as a promising solution, existing policies rely on local similarity heuristics, which we identify as being significantly misaligned with final generation quality. This discrepancy stems from the non-uniform propagation and accumulation of errors along the denoising trajectory. To address this, we propose Global-Impact Cache (GCache). We first establish a rigorous theoretical characterization of the error propagation upper bound. Recognizing that this bound can be overly conservative for complex, highly non-convex diffusion models, we further reparameterize the propagation exponent with a Bernstein form and reformulate cache policy search as a bilevel optimization problem. In detail, GCache identifies an optimal reuse policy in the inner objective while aligning the error-weighting function with generation quality loss in the outer objective. This framework effectively reconciles theoretical rigor with empirical performance, learning to prioritize computation where it most impacts visual fidelity. Extensive experiments demonstrate that GCache consistently outperforms prior caching strategies on both video and image generation. Notably, on the state-of-the-art Wan2.1 video diffusion model, GCache maintains a 2.17x speedup while significantly enhancing generation quality, reducing LPIPS from 0.1095 to 0.0316.

0.04

CalibCache: Cache-to-Full Feature Dynamics Calibration for Diffusion Transformers

cs.CV ·2026-11-18 ·Mingyu Liang, Dingkun Xu, Jingwei Xu
hot direction similarity 0.58
Abstract

Diffusion Transformers generate high-quality images, but iterative sampling remains computationally expensive. Feature caching reduces the number of full network evaluations, yet its approximation error can become more severe under short sampling schedules, where fewer full-compute steps and a coarser sampling grid can make history-based extrapolation less reliable. In this paper, we propose CalibCache, a lightweight offline calibration method that corrects systematic discrepancies between cached and full-compute feature dynamics. Specifically, CalibCache calibrates feature acceleration, defined as the second-order finite difference across sampling steps. Using only a single pair of full-compute and naive-cache trajectories at each setting, CalibCache fits scalar acceleration maps offline by centered least squares. These maps are then applied during sampling without additional full-network evaluations or online optimization. Across FLUX.1-dev and Qwen-Image on DrawBench and DiT-XL/2 on ImageNet-256, CalibCache consistently improves fidelity or generation quality over TaylorSeer under 20-step sampling at cache intervals $N=3,4,5$. At $N=5$, it reduces FLUX.1-dev LPIPS from $0.563$ to $0.429$ while achieving a $2.86\times$ denoising speedup over full-compute sampling, and lowers DiT-XL/2 FID from $16.39$ to $10.37$ relative to TaylorSeer.

0.26

ConserveEdit: Source-Anchored Transactions for Drift-Bounded Iterative Image Editing

cs.CV cs.LG ·2026-11-17 ·Shuyang Jiang, Fucheng Deng, Yuchuan Luo, Zhenyu Wu
similarity 0.57
Abstract · 28 pages, 15 figures, 16 tables; includes supplementary material

Instruction-driven image editors produce convincing local edits in one pass, but inside an iterative refinement loop every accepted output becomes the next input, so unintended changes outside the requested region accumulate. We present ConserveEdit, an editor-agnostic controller that treats each refinement step as a transaction against a contract compiled once from the source image. The contract separates what may change (the authorized region of each target, with a bounded halo for shadows and reflections) from what must survive (protected content with explicit tolerances). Candidates from a frozen editor are composed through a source-anchored mask and committed only if target progress, drift on protected content, and image quality pass as separate tests; otherwise the step is rolled back and repaired. For any editor, this keeps every pixel outside the authorized region bit-exact and bounds drift independently of the number of iterations, whereas no fixed scalar trade-off reproduces the separate tests. On all 1053 MagicBrush test edits with a frozen Qwen-Image-Edit, masking is necessary but not sufficient. A direct call already alters the rest of the image (12.1 dB PSNR outside the mask); composed through the source-anchored mask, it stays bit-exact there and its DINO similarity to the ground truth rises from 0.67 to 0.85, matching ConserveEdit, so this gain comes from the mask. Next to automatic masks, however, masked direct editing changes a protected face or text on 48% of turns, and masked scalar selection avoids this mostly by abstaining (23% constrained success). Because its drift test names the violated entity, ConserveEdit shrinks the support instead (2% violations, 53% constrained success); in a simulator with known ground truth it raises constrained success from 55.0% to 61.8%. Automatic grounding remains the main bottleneck. Code and logs will be released.

0.38