CS Paper Radar

A DSP Framework for ISAC with random signals: From Physical Transceiver to Periodic Models

Junjie Chen

cs.IT eess.SP ·submitted 2026-09-26 06:44 UTC · v1

Abstract

Communication-centric integrated sensing and communication~(ISAC) directly employs random data-bearing communication signals for both information transmission and environmental sensing. Existing studies generally describe pulse-shaped transmission in continuous time or directly adopt periodic discrete-time sensing models, leaving the digital signal processing~(DSP) operations connecting the physical transceiver and the periodic models unclear. This paper develops a DSP-oriented transceiver framework for single-antenna communication-centric ISAC. A common transmitter is constructed through modulation, cyclic-prefix~(CP) insertion, upsampling, and pulse shaping. For communication reception, the physical transceiver chain is reduced to a symbol-rate equivalent linear channel, which becomes circulant after CP removal and thereby supports frequency-domain equalization. For sensing reception, a high-rate reference waveform is extracted from the transmitted waveform and equivalently represented by circular pulse shaping. CP removal at the receiver then converts physical target delays into circular shifts of this reference waveform, leading to a periodic matched-filtering model and the corresponding range profile. Numerical results validate the developed framework through target range estimation and the symbol error rate performance of pulse-shaped CP-OFDM over frequency-selective Rayleigh fading channels.

Closest papers

Nearest neighbours by meaning across the whole index.

Delay-Doppler Sensing Performance Analysis for MIMO-OFDM ISAC Systems

eess.SP ·2026-09-01 ·Peishi Li, Rang Liu, Qian Liu, Ming Li
published similarity 0.58
Abstract · Accepted by IEEE Globecom 2026

In communication-centric integrated sensing and communication (ISAC), delay-Doppler sensing reuses data-bearing orthogonal frequency division multiplexing (OFDM) signals rather than dedicated radar probing waveforms. Consequently, the resulting range-Doppler map (RDM) is shaped not only by target parameters, but also by communication-symbol randomness and, in multi-antenna transmissions, by spatial beamforming. While existing analyses have largely focused on single-antenna OFDM-ISAC, the delay-Doppler sensing behavior of multi-antenna OFDM-ISAC remains insufficiently understood. This paper analyzes a multi-input multi-output (MIMO)-OFDM-ISAC system in which multiple data streams jointly illuminate a sensing target. We derive second-order moment expressions for the RDM under matched filtering (MF) and reciprocal filtering (RF), and use them to characterize the dynamic range (DR). The analysis reveals two key multi-stream effects. First, under MF, the random superposition of multiple beamformed streams creates an additional RDM floor beyond the modulation-dependent and receiver-noise terms; therefore, constant-modulus signaling no longer eliminates the data-induced pedestal as in single-antenna OFDM-ISAC. Second, under RF, the matched-angle data-induced floor is removed, but the noise floor is amplified according to the reciprocal-power statistics of the beamformed target illumination. These results show that the user-target angular geometry directly governs the MF/RF tradeoff: MF is more robust under weak illumination, whereas RF can achieve a higher DR when reciprocal-noise amplification is mild. Numerical results validate the analysis and demonstrate the distinct geometry-dependent behaviors of MF and RF.

0.14

FM-OFDM: A Constant-Envelope Sensing Waveform with Phase-Differencing Receiver Processing

eess.SP ·2026-09-22 ·Amir Bouziane, Hüseyin Arslan
similarity 0.57
Abstract

Cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) is widely adopted as a reference waveform for integrated sensing and communication (ISAC). However, its high peak-to-average power ratio (PAPR) requires power amplifier back-off, thereby reducing the available sensing link budget. Frequency-modulated OFDM (FM-OFDM) provides a constant-envelope signal with 0 dB PAPR and has demonstrated reliable communication performance in high-mobility scenarios, but its sensing characteristics remain largely unexplored. This paper characterizes FM-OFDM as a sensing waveform based on its bandwidth, ambiguity function, sidelobe behavior, and Doppler estimation capability. The analysis shows that its data dependent sidelobe floor is incoherent and decreases through across frame integration, whereas the corresponding CP-OFDM floor remains unchanged. Consequently, under equal occupied bandwidth and transmit power, frame-level integration reverses the single-symbol performance ordering and provides FM-OFDM with approximately 20 dB of additional dynamic range for weak-target detection. Moreover, the zero-delay cut of the FMOFDM ambiguity function is shown to be deterministic and independent of the transmitted data realization, in contrast to linearly modulated waveforms, while a closed-form expression is derived for the sidelobe floor away from the zero-delay cut. Since the nonlinear mapping between the data symbols and time-domain samples prevents the direct application of the conventional CP-OFDM range-Doppler processing chain, a weighted phase-increment Doppler estimator is developed. The proposed estimator enables closed-form prediction of the sensing floor and its crossover point with a minimum computational complexity.

0.32

OFDM-ISAC over Data Payloads: MSE Analysis, Constellation Design, and Experimentation

eess.SP ·2026-08-16 ·Kawon Han, Kaitao Meng, Alexandra Chatzicharistou, Christos Masouros
similarity 0.56
Abstract · 13 pages, 12 figures

Orthogonal frequency division multiplexing (OFDM) is a key waveform for integrated sensing and communication (ISAC) systems due to its high spectral efficiency and inherent compatibility with modern wireless standards. However, its fundamental estimation-theoretic sensing performance under random data modulation remains largely unexplored. This paper presents a unified and explicit performance analysis of OFDM-based ISAC systems for multi-target range estimation, focusing on the distinct impacts of the modulation constellation on the sensing performance. We develop a comprehensive estimation-theoretic framework to characterize the range estimation mean-square error (MSE) for both matched filtering (MF) and reciprocal filtering (RF) sensing receiver architectures. Our theoretical analysis reveals that in multi-target and clutter-rich environments, the sensing performance of the MF receiver is fundamentally limited by the fourth-order moment (kurtosis) of the constellation, which determines the data-dependent sidelobe interference level. In contrast, the RF receiver eliminates such interference at the cost of noise enhancement, with its performance governed by the inverse second-order moment of the constellation. Building on these closed-form MSE derivations, we propose a sensing-receiver specific geometric constellation shaping (GCS) framework. By jointly optimizing the constellation geometry based on the minimum Euclidean distance (MED) and receiver-dependent sensing metrics, we enable a flexible trade-off between communication reliability and sensing precision. Our results demonstrate that the proposed constellation shaping provides significant performance gains and facilitates a tailored sensing and communication trade-off across different receiver architectures in practical over-the-air implementations.

0.46

AFDM-ISAC Design Amalgamating FMCW Radar and Carrier Aggregation

eess.SP ·2026-10-29 ·Qu Luo, Qihao Peng, Zihuai Lin, Maged Elkashlan, Pei Xiao +2 more
publishedhot direction similarity 0.55
Abstract

Carrier-aggregation (CA)-assisted affine frequency division multiplexing (AFDM) is conceived for integrated sensing and communication (ISAC) systems. A frequency-modulated continuous-wave (FMCW)-inspired dechirping receiver is developed to exploit the inherent pulse-compression property of AFDM chirp subcarriers for accurate delay-Doppler estimation. To further enhance sensing performance, a pair of CA schemes is proposed. The Type-I CA scheme improves sensing accuracy by aggregating echo signals across multiple CA bands prior to radar processing, thereby reducing estimation error with low hardware overhead. The Type-II CA scheme enhances range resolution by effectively enlarging the sensing bandwidth, where chirps from different CA bands are designed to form a continuous set of chirp signals. Based on this principle, variable subcarrier sensing and asynchronous sensing schemes are developed. For the communication receiver, the generalized input-output relationship of AFDM is derived under both fractional delay and fractional Doppler (FDFD) channels. To address the challenge of FDFD estimation, a cross-domain sensing-assisted channel estimation (CDS-CE) scheme is proposed to facilitate time-domain delay-Doppler parameter estimation and affine-domain channel coefficient recovery. Simulation results demonstrate that the proposed framework achieves significant improvements in sensing accuracy and resolution, as well as in channel estimation performance compared with state-of-the-art methods.

0.35

Imaging-Communication Trade-off in VLEO ISAC-SAR Using CP-OFDM

eess.SP ·2026-09-16 ·In-Hyeok Lee, Kawon Han
similarity 0.55
Abstract · 13 pages, 13 figures

This paper investigates the imaging--communication trade-off in very-low-Earth-orbit (VLEO) integrated sensing and communication synthetic aperture radar (ISAC-SAR) using cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) as the shared waveform. We develop a unified analytical framework that jointly accounts for random communication payloads, range-dependent CP deficit across the swath, and slow-time-varying platform Doppler over the synthetic aperture. The resulting signal model separates the coherently retained component from inter-carrier interference (ICI) and inter-symbol interference (ISI) through common subcarrier-coupling coefficients. By propagating these effects through receive filtering, range compression, and azimuth focusing, we derive image-domain statistics for matched- and reciprocal-filter receivers. Based on the derived statistics, an effective noise-equivalent sigma zero (ENESZ) is formulated to characterize data-dependent sidelobes, ICI/ISI, and noise enhancement on a common backscatter-equivalent scale. The analysis reveals that the CP duration acts as a system-level design parameter bringing scalable trade-off. Increasing the CP improves coherent retention and suppresses range-dependent interference, but simultaneously reduces coherent processing gain and communication payload throughput. Accordingly, the sufficient-CP duration does not generally coincide with the imaging-optimal CP duration. End-to-end simulations for a representative VLEO scenario validate the derived image-domain statistics and demonstrate the resulting trade-off between ENESZ and communication throughput as a function of CP duration.

0.18

Movable Antenna-Aided ISAC: A Time- and Frequency-Division Framework

cs.IT ·2026-11-13 ·Yuyan Zhou, Haocheng Hua, Jie Xu, Rui Zhang
similarity 0.54
Abstract · 13 pages, 9 figures, 1 table

This paper investigates movable-antenna (MA)-enhanced integrated sensing and communication (ISAC) under time division duplex (TDD) and frequency division duplex (FDD) protocols, where sensing and communications occupy orthogonal time and frequency resources, respectively. A wideband target-position Cramér-Rao bound (CRB) is derived under a pulse-radar framework with pulse compression, incorporating delay and angle estimation error bounds in Cartesian coordinates. Both bounds depend on sensing power; the delay bound also depends on sensing bandwidth, while the angle bound depends on the effective aperture determined by the antenna position vector (APV). A worst-case position CRB over a prescribed target region ensures robust sensing performance. For multiuser downlink communication, joint APV and resource-allocation problems are formulated for TDD and FDD to maximize the minimum achievable user rate subject to the sensing requirement. An alternating optimization algorithm is developed for FDD, while TDD is addressed by searching over feasible sensing pulse numbers combined with APV optimization. Representative scenarios clarify how MA improves channel orthogonality and enlarges the sensing aperture, and how these effects shape the TDD/FDD rate comparison. Numerical results show that APV optimization enlarges the communication-sensing tradeoff region over fixed-position antenna benchmarks. The optimized configurations exhibit distinct tendencies: TDD favors a larger antenna position variance, whereas FDD favors better channel orthogonality among users.

0.15

Continuous-Phase Frequency-Hopping MIMO Signaling and Processing for ISAC

eess.SP ·2026-10-16 ·Yi Wang, Xianxiang Yu, Jing Yang, Tao Fan, Linlong Wu +2 more
similarity 0.54
Abstract · 22 pages, 13 figures, including appendices

Frequency-hopping MIMO integrated sensing and communications (FH-MIMO-ISAC) supports agile multidimensional signaling but faces challenges in phase-continuous transmission, demodulation without channel-phase information, and coherent processing of multi-frequency echoes. We propose a continuous-phase frequency-hopping (CP-FH) MIMO ISAC waveform with matched communication and radar processing. Information is conveyed jointly by frequency combinations and continuous-phase-modulation symbols. CPM phase accumulation and frequency-hopping linear-frequency-modulation phase compensation maintain phase continuity and reduce spectral leakage. We derive exact inter-element orthogonality conditions, residual cross-correlation bounds, and a bound on averaged transmit-beampattern ripple. For communication, projection-energy demodulation requires no channel-phase information and approximates least-squares detection under weak inter-branch correlation. It separates frequency-combination search from CPM-symbol decisions, reducing complexity while retaining direct joint-search decisions. For radar, structure-matched coherent processing combines space-time-frequency matched filtering, velocity-consistent Doppler focusing, and frequency-aperture focusing to form a three-dimensional coarse-range--velocity--fine-range response. It reduces Doppler-mismatch loss and extra detections from periodic range grating lobes in conventional pulse-Doppler processing. We further derive the joint range response, output signal and noise powers, and receive beampattern. The analysis characterizes target-discrimination limits under periodic ambiguity and shows that the proposed processor preserves frequency-aperture range resolution and full-aperture angular resolution, with equal output noise power under the stated conditions.

0.31

A Continuous Payload-Bearing Discrete Multitone Modulation Framework for Fiber-Optic Integrated Sensing and Communication

eess.SP ·2026-08-29 ·Huan Huang, Ziang Chen, Zhiyang Xue, Dongdong Zou, Yi Cai
similarity 0.53
Abstract · This manuscript has been submitted for consideration for publication

A key challenge in fiber-optic integrated sensing and communication (ISAC) is to make the payload-bearing waveform itself serve both functions without a separate sensing waveform or sensing-only silent interval. We propose a continuous discrete multitone (DMT) framework with two waveform modes, in which the same payload-bearing waveform supports forward intensity-modulation/direct-detection (IM/DD) communication and backward distributed acoustic sensing (DAS). A unified phase-sensitive optical time-domain reflectometry (φ-OTDR) model represents distributed Rayleigh backscattering as a finite-memory sensing multipath channel. It shows that conventional pulse-and-wait φ-OTDR requires a round-trip-time-scale silent interval to isolate successive returns, while nonzero off-peak samples in practical matched-filter (MF) pulse compression cause spatial intersymbol interference (ISI). Continuous DMT instead retains superposed returns and separates range-cell contributions through known-waveform channel reconstruction. Cyclic-prefix DMT (CP-DMT) uses a full-memory CP and one-tap frequency-domain equalization (FDE); under sufficient-CP and ideal full-bin inversion conditions, it eliminates MF-correlation-induced spatial ISI. Cyclic-prefix-free DMT (NoCP-DMT) applies regularized least squares (LS) to the long-memory linear convolution, avoiding the CP at higher receiver complexity. Experiments over a 10-km fiber link localize a 600-Hz disturbance applied by a piezoelectric transducer (PZT) near 5.071 km and recover gauge-differential phase with correlations of 0.989 and 0.987 for CP-DMT and NoCP-DMT, respectively. At 2- and 1-V PZT drive levels, the ten-record localization standard deviations are 0.16/0.11 m and 0.18/0.38 m, respectively. The corresponding IM/DD error vector magnitude values range from 4.80% to 5.00%, with no bit errors observed.

0.50