CS Paper Radar

AFDM-ISAC Design Amalgamating FMCW Radar and Carrier Aggregation

Qu Luo, Qihao Peng, Zihuai Lin, Maged Elkashlan, Pei Xiao, Rahim Tafazolli, Lajos Hanzo

eess.SP ·submitted 2026-10-29 14:07 UTC · v1
publishedhot direction

Abstract

Carrier-aggregation (CA)-assisted affine frequency division multiplexing (AFDM) is conceived for integrated sensing and communication (ISAC) systems. A frequency-modulated continuous-wave (FMCW)-inspired dechirping receiver is developed to exploit the inherent pulse-compression property of AFDM chirp subcarriers for accurate delay-Doppler estimation. To further enhance sensing performance, a pair of CA schemes is proposed. The Type-I CA scheme improves sensing accuracy by aggregating echo signals across multiple CA bands prior to radar processing, thereby reducing estimation error with low hardware overhead. The Type-II CA scheme enhances range resolution by effectively enlarging the sensing bandwidth, where chirps from different CA bands are designed to form a continuous set of chirp signals. Based on this principle, variable subcarrier sensing and asynchronous sensing schemes are developed. For the communication receiver, the generalized input-output relationship of AFDM is derived under both fractional delay and fractional Doppler (FDFD) channels. To address the challenge of FDFD estimation, a cross-domain sensing-assisted channel estimation (CDS-CE) scheme is proposed to facilitate time-domain delay-Doppler parameter estimation and affine-domain channel coefficient recovery. Simulation results demonstrate that the proposed framework achieves significant improvements in sensing accuracy and resolution, as well as in channel estimation performance compared with state-of-the-art methods.

Closest papers

Nearest neighbours by meaning across the whole index.

AFDM-ISAC With Fractional Delay-Doppler Coupling

cs.IT ·2026-08-12 ·Shaohua Li, Cunhua Pan, Hong Ren, Ruizhe Wang, Jiangzhou Wang
similarity 0.76
Abstract

Affine frequency division multiplexing (AFDM) is a promising chirp-based multicarrier waveform for high-mobility integrated sensing and communication (ISAC). Accurate angle, delay, and Doppler estimation is essential for AFDM sensing. Since target delays and Doppler shifts are generally continuous-valued, representing them on a discrete delay--Doppler grid causes energy leakage and peak displacement in the discrete affine Fourier transform (DAFT) domain. The AFDM chirp also induces delay--Doppler coupling in the DAFT-domain response. The resulting DAFT-domain matching-score surface exhibits a local ridge that is not aligned with the normalized-delay and normalized-Doppler axes. To address these issues, this paper investigates joint estimation of angle and continuous-valued delay--Doppler parameters for a colocated AFDM-ISAC sensing architecture. A transform-domain sparse sensing model is formulated from the fractional DAFT-domain response. Based on this model, a coupled-coordinate Newtonized orthogonal matching pursuit (CC-NOMP) estimator is developed. CC-NOMP uses the AFDM-induced coupling coordinate to parameterize the dominant local ridge. It combines coupled-coordinate Newton refinement with safeguarded updates, coupling-aligned delay refinement, and cyclic multi-target refinement to estimate angle, continuous normalized delay, and normalized Doppler. A deterministic Cramér--Rao bound and a dominant-order complexity analysis are also derived. Simulation results with continuous-valued off-grid target parameters show that CC-NOMP achieves lower delay and Doppler error floors than the considered baselines while maintaining comparable angle-estimation accuracy.

0.04

Receiver Design for Continuous-Time AFDM based on Pre-Filter De-Chirp

eess.SP ·2026-10-18 ·Qingyu Li, Shuangyang Li, Guanghui Liu, Fuchen Xu, Hongjun Liu
hot direction similarity 0.67
Abstract · Submitted to IEEE International Conference on Communications (ICC 2027)

Affine frequency division multiplexing (AFDM) is a promising waveform for future high-mobility communications due to its Doppler robustness and diversity gain. However, existing continuous-time AFDM relies on chirp-dependent wideband receive filtering, which increases noise power and causes channel-energy leakage. In this paper, we propose an AFDM reception scheme based on pre-filter de-chirp for doubly selective channels. The coupling between de-chirp and the channel is first characterized, yielding an equivalent path representation with delay-coupled effective Doppler shifts. The discrete affine Fourier transform (DAFT)-domain equivalent channel is then derived under general transmit pulse shaping and linear time-invariant receive filtering, showing that the effective filtering kernel depends only on the relative sample offset and avoids the additional spreading caused by conventional chirp-dependent filtering. The receive-noise power is further analyzed, and an explicit expression for the signal-to-noise ratio (SNR) gap is obtained by the required receive-filter bandwidths. Simulations verify the theoretical SNR analysis and show that the proposed scheme significantly outperforms the conventional scheme while approaching ideal discrete-time AFDM.

0.25

Continuous-Phase Frequency-Hopping MIMO Signaling and Processing for ISAC

eess.SP ·2026-10-16 ·Yi Wang, Xianxiang Yu, Jing Yang, Tao Fan, Linlong Wu +2 more
similarity 0.65
Abstract · 22 pages, 13 figures, including appendices

Frequency-hopping MIMO integrated sensing and communications (FH-MIMO-ISAC) supports agile multidimensional signaling but faces challenges in phase-continuous transmission, demodulation without channel-phase information, and coherent processing of multi-frequency echoes. We propose a continuous-phase frequency-hopping (CP-FH) MIMO ISAC waveform with matched communication and radar processing. Information is conveyed jointly by frequency combinations and continuous-phase-modulation symbols. CPM phase accumulation and frequency-hopping linear-frequency-modulation phase compensation maintain phase continuity and reduce spectral leakage. We derive exact inter-element orthogonality conditions, residual cross-correlation bounds, and a bound on averaged transmit-beampattern ripple. For communication, projection-energy demodulation requires no channel-phase information and approximates least-squares detection under weak inter-branch correlation. It separates frequency-combination search from CPM-symbol decisions, reducing complexity while retaining direct joint-search decisions. For radar, structure-matched coherent processing combines space-time-frequency matched filtering, velocity-consistent Doppler focusing, and frequency-aperture focusing to form a three-dimensional coarse-range--velocity--fine-range response. It reduces Doppler-mismatch loss and extra detections from periodic range grating lobes in conventional pulse-Doppler processing. We further derive the joint range response, output signal and noise powers, and receive beampattern. The analysis characterizes target-discrimination limits under periodic ambiguity and shows that the proposed processor preserves frequency-aperture range resolution and full-aperture angular resolution, with equal output noise power under the stated conditions.

0.31

AFDM-Enabled ISAC in Dynamic Environments: Fundamentals, Technologies and Opportunities

eess.SP ·2026-09-04 ·Linchu Chen, Zhendong Li, Zhou Su, Lin Chen, Wen Chen
similarity 0.64
Abstract

Dynamic environments pose fundamental challenges to integrated sensing and communication (ISAC), particularly due to severe Doppler effects, rapidly time-varying channels, and the intricate coupling between delay and Doppler shifts. Affine frequency-division multiplexing (AFDM), with its inherent capability of characterizing and separating delay and Doppler effects, has emerged as a promising waveform for dynamic ISAC. This article provides a comprehensive overview on AFDM-enabled ISAC in dynamic environments, covering its fundamental principles, distinctive advantages, representative application scenarios, and key enabling technologies. We first characterize the key features of ISAC in dynamic environments and introduce the fundamentals of AFDM, followed by an analysis of scenarios where AFDM can provide significant performance benefits. Then, several key enabling technologies for AFDM-based ISAC in dynamic environments are elaborated upon, accompanied by case studies on the critical aspects therein. Finally, open challenges and promising future research directions are discussed, aiming to provide a comprehensive reference for researchers and practitioners while inspiring further innovation in this emerging field.

0.21

Delay-Doppler Sensing Performance Analysis for MIMO-OFDM ISAC Systems

eess.SP ·2026-09-01 ·Peishi Li, Rang Liu, Qian Liu, Ming Li
published similarity 0.64
Abstract · Accepted by IEEE Globecom 2026

In communication-centric integrated sensing and communication (ISAC), delay-Doppler sensing reuses data-bearing orthogonal frequency division multiplexing (OFDM) signals rather than dedicated radar probing waveforms. Consequently, the resulting range-Doppler map (RDM) is shaped not only by target parameters, but also by communication-symbol randomness and, in multi-antenna transmissions, by spatial beamforming. While existing analyses have largely focused on single-antenna OFDM-ISAC, the delay-Doppler sensing behavior of multi-antenna OFDM-ISAC remains insufficiently understood. This paper analyzes a multi-input multi-output (MIMO)-OFDM-ISAC system in which multiple data streams jointly illuminate a sensing target. We derive second-order moment expressions for the RDM under matched filtering (MF) and reciprocal filtering (RF), and use them to characterize the dynamic range (DR). The analysis reveals two key multi-stream effects. First, under MF, the random superposition of multiple beamformed streams creates an additional RDM floor beyond the modulation-dependent and receiver-noise terms; therefore, constant-modulus signaling no longer eliminates the data-induced pedestal as in single-antenna OFDM-ISAC. Second, under RF, the matched-angle data-induced floor is removed, but the noise floor is amplified according to the reciprocal-power statistics of the beamformed target illumination. These results show that the user-target angular geometry directly governs the MF/RF tradeoff: MF is more robust under weak illumination, whereas RF can achieve a higher DR when reciprocal-noise amplification is mild. Numerical results validate the analysis and demonstrate the distinct geometry-dependent behaviors of MF and RF.

0.14

Payload-Blind Bistatic Delay-Doppler Sensing with Phase-Injected Chirps in CE-OFDM

eess.SP ·2026-11-06 ·Gustavo P. Gonçalves, Henrique L. Senger, Bruno S. Chang, Giuseppe Thadeu Freitas de Abreu
benchmark similarity 0.63
Abstract

Constant-envelope orthogonal frequency-division multiplexing (CE-OFDM) preserves a unit-magnitude sample envelope, but its Hermitian-symmetric structure makes dedicated sensing pilots costly, and additive pilots disrupt this envelope. We show that injecting a known chirp, here a Zadoff-Chu (ZC) sequence, into the CE-OFDM phase enables payload-blind bistatic delay-Doppler sensing without dedicated sensing frames or an explicit pilot power split: the residual carrier, given by the ensemble mean under the adopted payload model, becomes an implicit superimposed pilot for a receive-only node. A Doppler-aligned receiver integrates this reference coherently across frames while the payload residual averages down. In contrast, phase-domain injected training (PIT) frame averaging, designed for quasi-static channel estimation, loses about 32 dB for the simulated target with 16 averaged frames. Closed-form approximations characterize the payload-induced floor, known-cell detection probability and direct-path tolerance. In the noise-limited simulations, the receiver incurs a 2.8 dB detection gap relative to a payload-aware matched filter without interference cancellation and matches a dedicated-pilot benchmark of equal reference energy without its 53% frame overhead.

0.27

FM-OFDM: A Constant-Envelope Sensing Waveform with Phase-Differencing Receiver Processing

eess.SP ·2026-09-22 ·Amir Bouziane, Hüseyin Arslan
similarity 0.63
Abstract

Cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) is widely adopted as a reference waveform for integrated sensing and communication (ISAC). However, its high peak-to-average power ratio (PAPR) requires power amplifier back-off, thereby reducing the available sensing link budget. Frequency-modulated OFDM (FM-OFDM) provides a constant-envelope signal with 0 dB PAPR and has demonstrated reliable communication performance in high-mobility scenarios, but its sensing characteristics remain largely unexplored. This paper characterizes FM-OFDM as a sensing waveform based on its bandwidth, ambiguity function, sidelobe behavior, and Doppler estimation capability. The analysis shows that its data dependent sidelobe floor is incoherent and decreases through across frame integration, whereas the corresponding CP-OFDM floor remains unchanged. Consequently, under equal occupied bandwidth and transmit power, frame-level integration reverses the single-symbol performance ordering and provides FM-OFDM with approximately 20 dB of additional dynamic range for weak-target detection. Moreover, the zero-delay cut of the FMOFDM ambiguity function is shown to be deterministic and independent of the transmitted data realization, in contrast to linearly modulated waveforms, while a closed-form expression is derived for the sidelobe floor away from the zero-delay cut. Since the nonlinear mapping between the data symbols and time-domain samples prevents the direct application of the conventional CP-OFDM range-Doppler processing chain, a weighted phase-increment Doppler estimator is developed. The proposed estimator enables closed-form prediction of the sensing floor and its crossover point with a minimum computational complexity.

0.32

Ultra-High Resolution Method for Multipath Within a Co-Delay-Doppler Bin in DFT-P-OCDM

cs.IT ·2026-09-04 ·Mingxuan Han, Weile Zhang, Feifei Gao
similarity 0.62
Abstract

Communication systems can reuse their transmitted signals for sensing without dedicated radar transmissions. For an established DFT-preprocessed orthogonal chirp division multiplexing (DFT-P-OCDM) waveform, this task becomes difficult when several physical paths in a doubly selective channel fall into the same co-delay-Doppler bin. In this case, the number of resolvable delay classes inferred from the pilot may be smaller than the number of physical paths within the co-bin. This mismatch increases the difficulty of path number determination, fractional Doppler offset estimation, and channel reconstruction. We derive a pointwise relationship between the input and output in the DFT preprocessed Fresnel (DPF) domain for doubly selective channels with multiple paths within the co-delay-Doppler bin. Based on this input and output relation, we propose the two stage ultra high resolution (TSUR) framework. The first stage uses pilots of the phase progression to estimate delay, while the second stage uses the leakage samples to estimate the Doppler and the number of paths within each delay class. Furthermore, we derive CRLBs and analyze how the pilot configuration trades sensing resolution and communication recovery. Simulation results demonstrate that TSUR resolves same delay paths within a co-delay-Doppler bin, remains robust to exist delay offsets, and achieves lower fractional Doppler estimation errors than sequential extraction and off-grid baselines.

0.25