CS Paper Radar

Receiver Design for Continuous-Time AFDM based on Pre-Filter De-Chirp

Qingyu Li, Shuangyang Li, Guanghui Liu, Fuchen Xu, Hongjun Liu

eess.SP ·submitted 2026-10-18 10:46 UTC · v1
hot direction

Abstract

Affine frequency division multiplexing (AFDM) is a promising waveform for future high-mobility communications due to its Doppler robustness and diversity gain. However, existing continuous-time AFDM relies on chirp-dependent wideband receive filtering, which increases noise power and causes channel-energy leakage. In this paper, we propose an AFDM reception scheme based on pre-filter de-chirp for doubly selective channels. The coupling between de-chirp and the channel is first characterized, yielding an equivalent path representation with delay-coupled effective Doppler shifts. The discrete affine Fourier transform (DAFT)-domain equivalent channel is then derived under general transmit pulse shaping and linear time-invariant receive filtering, showing that the effective filtering kernel depends only on the relative sample offset and avoids the additional spreading caused by conventional chirp-dependent filtering. The receive-noise power is further analyzed, and an explicit expression for the signal-to-noise ratio (SNR) gap is obtained by the required receive-filter bandwidths. Simulations verify the theoretical SNR analysis and show that the proposed scheme significantly outperforms the conventional scheme while approaching ideal discrete-time AFDM.

Comment
Submitted to IEEE International Conference on Communications (ICC 2027)

Closest papers

Nearest neighbours by meaning across the whole index.

Effects of Residual Chirp Rate on DAFT-s-AFDM Uplink Performance

eess.SP ·2026-10-07 ·Henrique L. Senger, Gustavo P. Gonçalves, Bruno S. Chang, Hyeon Seok Rou, Giuseppe Thadeu Freitas de Abreu
similarity 0.74
Abstract

Affine frequency division multiplexing (AFDM) is robust to doubly dispersive channels in high-mobility 6G systems but, like orthogonal frequency division multiplexing (OFDM), suffers from a high peak-to-average power ratio (PAPR). Spreading with a discrete affine Fourier transform (DAFT) yields DAFT-s-AFDM, whose precoder and modulator chirps can be chosen independently. For a single user with zero-offset localized allocation, we show that these two chirps merge into a single residual chirp whose rate, with the other two chirp rates fixed, alone determines their effect. At the transmitter, this rate defines a circulant spreading kernel whose fourth moment quantifies the envelope fluctuation; symmetries reduce its characterization to rates in [0, 1/4]. At a linear minimum mean-square error (MMSE) receiver, the residual chirp redistributes the mean- square error across symbols without changing its total; under a Gaussian approximation, a more uniform per-symbol error lowers the uncoded bit error rate (BER). In uncoded QPSK simulations, a zero rate yields the lowest PAPR, whereas a generic rate reduces the signal-to-noise ratio required for a BER of $10^{-3}$ by 4.4 dB at a 3.33 dB PAPR cost (exceedance probability $10^{-3}$);a rate of 1/3 captures 2.8 dB of this gain for only 0.88 dB of that cost.

0.25

AFDM-ISAC With Fractional Delay-Doppler Coupling

cs.IT ·2026-08-12 ·Shaohua Li, Cunhua Pan, Hong Ren, Ruizhe Wang, Jiangzhou Wang
similarity 0.70
Abstract

Affine frequency division multiplexing (AFDM) is a promising chirp-based multicarrier waveform for high-mobility integrated sensing and communication (ISAC). Accurate angle, delay, and Doppler estimation is essential for AFDM sensing. Since target delays and Doppler shifts are generally continuous-valued, representing them on a discrete delay--Doppler grid causes energy leakage and peak displacement in the discrete affine Fourier transform (DAFT) domain. The AFDM chirp also induces delay--Doppler coupling in the DAFT-domain response. The resulting DAFT-domain matching-score surface exhibits a local ridge that is not aligned with the normalized-delay and normalized-Doppler axes. To address these issues, this paper investigates joint estimation of angle and continuous-valued delay--Doppler parameters for a colocated AFDM-ISAC sensing architecture. A transform-domain sparse sensing model is formulated from the fractional DAFT-domain response. Based on this model, a coupled-coordinate Newtonized orthogonal matching pursuit (CC-NOMP) estimator is developed. CC-NOMP uses the AFDM-induced coupling coordinate to parameterize the dominant local ridge. It combines coupled-coordinate Newton refinement with safeguarded updates, coupling-aligned delay refinement, and cyclic multi-target refinement to estimate angle, continuous normalized delay, and normalized Doppler. A deterministic Cramér--Rao bound and a dominant-order complexity analysis are also derived. Simulation results with continuous-valued off-grid target parameters show that CC-NOMP achieves lower delay and Doppler error floors than the considered baselines while maintaining comparable angle-estimation accuracy.

0.04

AFDM-ISAC Design Amalgamating FMCW Radar and Carrier Aggregation

eess.SP ·2026-10-29 ·Qu Luo, Qihao Peng, Zihuai Lin, Maged Elkashlan, Pei Xiao +2 more
publishedhot direction similarity 0.67
Abstract

Carrier-aggregation (CA)-assisted affine frequency division multiplexing (AFDM) is conceived for integrated sensing and communication (ISAC) systems. A frequency-modulated continuous-wave (FMCW)-inspired dechirping receiver is developed to exploit the inherent pulse-compression property of AFDM chirp subcarriers for accurate delay-Doppler estimation. To further enhance sensing performance, a pair of CA schemes is proposed. The Type-I CA scheme improves sensing accuracy by aggregating echo signals across multiple CA bands prior to radar processing, thereby reducing estimation error with low hardware overhead. The Type-II CA scheme enhances range resolution by effectively enlarging the sensing bandwidth, where chirps from different CA bands are designed to form a continuous set of chirp signals. Based on this principle, variable subcarrier sensing and asynchronous sensing schemes are developed. For the communication receiver, the generalized input-output relationship of AFDM is derived under both fractional delay and fractional Doppler (FDFD) channels. To address the challenge of FDFD estimation, a cross-domain sensing-assisted channel estimation (CDS-CE) scheme is proposed to facilitate time-domain delay-Doppler parameter estimation and affine-domain channel coefficient recovery. Simulation results demonstrate that the proposed framework achieves significant improvements in sensing accuracy and resolution, as well as in channel estimation performance compared with state-of-the-art methods.

0.35

Ultra-High Resolution Method for Multipath Within a Co-Delay-Doppler Bin in DFT-P-OCDM

cs.IT ·2026-09-04 ·Mingxuan Han, Weile Zhang, Feifei Gao
similarity 0.65
Abstract

Communication systems can reuse their transmitted signals for sensing without dedicated radar transmissions. For an established DFT-preprocessed orthogonal chirp division multiplexing (DFT-P-OCDM) waveform, this task becomes difficult when several physical paths in a doubly selective channel fall into the same co-delay-Doppler bin. In this case, the number of resolvable delay classes inferred from the pilot may be smaller than the number of physical paths within the co-bin. This mismatch increases the difficulty of path number determination, fractional Doppler offset estimation, and channel reconstruction. We derive a pointwise relationship between the input and output in the DFT preprocessed Fresnel (DPF) domain for doubly selective channels with multiple paths within the co-delay-Doppler bin. Based on this input and output relation, we propose the two stage ultra high resolution (TSUR) framework. The first stage uses pilots of the phase progression to estimate delay, while the second stage uses the leakage samples to estimate the Doppler and the number of paths within each delay class. Furthermore, we derive CRLBs and analyze how the pilot configuration trades sensing resolution and communication recovery. Simulation results demonstrate that TSUR resolves same delay paths within a co-delay-Doppler bin, remains robust to exist delay offsets, and achieves lower fractional Doppler estimation errors than sequential extraction and off-grid baselines.

0.25

Comparative Analysis of Filter Bank Waveforms for ISAC Systems: 2D-FFT FB and AFBM

eess.SP ·2026-10-05 ·Polianna Basso, Victor Augusto Del Monego, Hyeon Seok Rou, Bruno S. Chang, Giuseppe Thadeu Freitas de Abreu +1 more
similarity 0.64
Abstract · 6 pages, 7 figures, 2027 IEEE 105th Vehicular Technology Conference (VTC2027-Spring)

We present a comparative analysis of two promising filter bank multicarrier waveforms for integrated sensing and communications (ISAC) systems operating in high-mobility environments. In particular, we consider two-dimensional FFT-precoded filter bank (2D-FFT FB) modulation and the recently-proposed affine filter bank modulation (AFBM) waveforms, which exploit different signal representations across the time-frequency, delay-Doppler and affine domains to improve robustness against Doppler effects, each resulting in distinct features. On the one hand, 2D-FFT FB improves spectral localization under high Doppler conditions, while AFBM combines chirp-based modulation with filter bank processing to achieve low peak-to-average power ratio (PAPR) and reduced out-of-band emission (OOBE). These schemes are compared in terms of OOBE, PAPR and bit-error-rate (BER), as well as the delay and Doppler cuts of the ambiguity function (AF) under deterministic and random sensing symbols. Results for orthogonal time frequency space (OTFS) and affine frequency division multiplexing (AFDM) are also included to provide additional basis of comparison. The results show the performance trade-offs between the two filter bank (FB)-based schemes, providing insights into waveform candidates for high-mobility ISAC scenarios such as vehicular communications and future sixth generation (6G) networks.

0.31

FM-OFDM: A Constant-Envelope Sensing Waveform with Phase-Differencing Receiver Processing

eess.SP ·2026-09-22 ·Amir Bouziane, Hüseyin Arslan
similarity 0.63
Abstract

Cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) is widely adopted as a reference waveform for integrated sensing and communication (ISAC). However, its high peak-to-average power ratio (PAPR) requires power amplifier back-off, thereby reducing the available sensing link budget. Frequency-modulated OFDM (FM-OFDM) provides a constant-envelope signal with 0 dB PAPR and has demonstrated reliable communication performance in high-mobility scenarios, but its sensing characteristics remain largely unexplored. This paper characterizes FM-OFDM as a sensing waveform based on its bandwidth, ambiguity function, sidelobe behavior, and Doppler estimation capability. The analysis shows that its data dependent sidelobe floor is incoherent and decreases through across frame integration, whereas the corresponding CP-OFDM floor remains unchanged. Consequently, under equal occupied bandwidth and transmit power, frame-level integration reverses the single-symbol performance ordering and provides FM-OFDM with approximately 20 dB of additional dynamic range for weak-target detection. Moreover, the zero-delay cut of the FMOFDM ambiguity function is shown to be deterministic and independent of the transmitted data realization, in contrast to linearly modulated waveforms, while a closed-form expression is derived for the sidelobe floor away from the zero-delay cut. Since the nonlinear mapping between the data symbols and time-domain samples prevents the direct application of the conventional CP-OFDM range-Doppler processing chain, a weighted phase-increment Doppler estimator is developed. The proposed estimator enables closed-form prediction of the sensing floor and its crossover point with a minimum computational complexity.

0.32

AFDM-Enabled ISAC in Dynamic Environments: Fundamentals, Technologies and Opportunities

eess.SP ·2026-09-04 ·Linchu Chen, Zhendong Li, Zhou Su, Lin Chen, Wen Chen
similarity 0.62
Abstract

Dynamic environments pose fundamental challenges to integrated sensing and communication (ISAC), particularly due to severe Doppler effects, rapidly time-varying channels, and the intricate coupling between delay and Doppler shifts. Affine frequency-division multiplexing (AFDM), with its inherent capability of characterizing and separating delay and Doppler effects, has emerged as a promising waveform for dynamic ISAC. This article provides a comprehensive overview on AFDM-enabled ISAC in dynamic environments, covering its fundamental principles, distinctive advantages, representative application scenarios, and key enabling technologies. We first characterize the key features of ISAC in dynamic environments and introduce the fundamentals of AFDM, followed by an analysis of scenarios where AFDM can provide significant performance benefits. Then, several key enabling technologies for AFDM-based ISAC in dynamic environments are elaborated upon, accompanied by case studies on the critical aspects therein. Finally, open challenges and promising future research directions are discussed, aiming to provide a comprehensive reference for researchers and practitioners while inspiring further innovation in this emerging field.

0.21

Resolving the Discontinuity of Continuous-Time AFDM Waveforms

eess.SP cs.IT ·2026-09-07 ·Yewen Cao, Yulin Shao
similarity 0.62
Abstract · Keywords: AFDM, continuous-time waveform, SFDM, out-of-band emission

Continuous-time affine frequency division multiplexing (AFDM) waveforms, constructed via frequency wrapping and phase correction, are known to be sample-wise equivalent to the widely adopted discrete AFDM framework. In this paper, we uncover a fundamental and previously overlooked flaw in this construction: its complex envelope is inherently discontinuous for generic chirp parameters. We show that these discontinuities are the direct cause of the high out-of-band emission (OOBE). To resolve this issue, we propose a fundamentally different continuous-time waveform, termed stepped frequency division multiplexing (SFDM). Unlike conventional approaches that allow continuous frequency variation, SFDM freezes the instantaneous frequency at the midpoint of the underlying chirp trajectory within each Nyquist sampling interval. This design yields a complex envelope that is strictly continuous over the entire symbol duration while preserving exact sample-wise equivalence with discrete AFDM. A unified spectral analysis reveals that the superior OOBE performance of SFDM stems from the absence of internal jump discontinuities, which otherwise dominate the far-out spectral roll-off. Numerical results confirm that SFDM consistently achieves significantly lower OOBE across a wide range of chirp rates.

0.23