CS Paper Radar

AFDM-ISAC With Fractional Delay-Doppler Coupling

Shaohua Li, Cunhua Pan, Hong Ren, Ruizhe Wang, Jiangzhou Wang

cs.IT ·submitted 2026-08-12 12:34 UTC · v1

Abstract

Affine frequency division multiplexing (AFDM) is a promising chirp-based multicarrier waveform for high-mobility integrated sensing and communication (ISAC). Accurate angle, delay, and Doppler estimation is essential for AFDM sensing. Since target delays and Doppler shifts are generally continuous-valued, representing them on a discrete delay--Doppler grid causes energy leakage and peak displacement in the discrete affine Fourier transform (DAFT) domain. The AFDM chirp also induces delay--Doppler coupling in the DAFT-domain response. The resulting DAFT-domain matching-score surface exhibits a local ridge that is not aligned with the normalized-delay and normalized-Doppler axes. To address these issues, this paper investigates joint estimation of angle and continuous-valued delay--Doppler parameters for a colocated AFDM-ISAC sensing architecture. A transform-domain sparse sensing model is formulated from the fractional DAFT-domain response. Based on this model, a coupled-coordinate Newtonized orthogonal matching pursuit (CC-NOMP) estimator is developed. CC-NOMP uses the AFDM-induced coupling coordinate to parameterize the dominant local ridge. It combines coupled-coordinate Newton refinement with safeguarded updates, coupling-aligned delay refinement, and cyclic multi-target refinement to estimate angle, continuous normalized delay, and normalized Doppler. A deterministic Cramér--Rao bound and a dominant-order complexity analysis are also derived. Simulation results with continuous-valued off-grid target parameters show that CC-NOMP achieves lower delay and Doppler error floors than the considered baselines while maintaining comparable angle-estimation accuracy.

Closest papers

Nearest neighbours by meaning across the whole index.

AFDM-ISAC Design Amalgamating FMCW Radar and Carrier Aggregation

eess.SP ·2026-10-29 ·Qu Luo, Qihao Peng, Zihuai Lin, Maged Elkashlan, Pei Xiao +2 more
publishedhot direction similarity 0.76
Abstract

Carrier-aggregation (CA)-assisted affine frequency division multiplexing (AFDM) is conceived for integrated sensing and communication (ISAC) systems. A frequency-modulated continuous-wave (FMCW)-inspired dechirping receiver is developed to exploit the inherent pulse-compression property of AFDM chirp subcarriers for accurate delay-Doppler estimation. To further enhance sensing performance, a pair of CA schemes is proposed. The Type-I CA scheme improves sensing accuracy by aggregating echo signals across multiple CA bands prior to radar processing, thereby reducing estimation error with low hardware overhead. The Type-II CA scheme enhances range resolution by effectively enlarging the sensing bandwidth, where chirps from different CA bands are designed to form a continuous set of chirp signals. Based on this principle, variable subcarrier sensing and asynchronous sensing schemes are developed. For the communication receiver, the generalized input-output relationship of AFDM is derived under both fractional delay and fractional Doppler (FDFD) channels. To address the challenge of FDFD estimation, a cross-domain sensing-assisted channel estimation (CDS-CE) scheme is proposed to facilitate time-domain delay-Doppler parameter estimation and affine-domain channel coefficient recovery. Simulation results demonstrate that the proposed framework achieves significant improvements in sensing accuracy and resolution, as well as in channel estimation performance compared with state-of-the-art methods.

0.35

2D Coprime Pilots for Delay-Doppler Sensing in OFDM-ISAC Systems

eess.SP ·2026-10-08 ·Guanping Shang, Zeyan Zhuang, Anzheng Tang, Shenghui Song, Chi-Ying Tsui
similarity 0.72
Abstract · This paper has been submitted to IEEE journal

Integrated Sensing and Communication (ISAC) is envisioned to endow future 6G systems with seamless sensing capabilities. To support efficient sensing with minimum communication overhead, sparse pilots embedded within communication frames have emerged as a promising solution. Along this line of research, existing studies have achieved engaging results in maximizing the unambiguous sensing region. However, jointly maximizing the sensing region and sensing accuracy remains challenging due to the lack of a unified performance metric and an effective pilot design framework. This paper jointly optimizes the unambiguous sensing region and sensing accuracy for estimating delay-Doppler (DD) parameters in Orthogonal Frequency Division Multiplexing (OFDM)-ISAC systems, where sensing mutual information (SMI) is adopted as a unified performance metric to characterize the overall sensing capability. Specifically, the joint optimization is formulated as an SMI maximization problem by systematically resolving sensing ambiguity and optimizing sensing accuracy. In particular, based on the generalized Bezout identity, we derive a 2D (timefrequency) coprime condition, which, as far as the authors know, is the first necessary and sufficient condition to achieve the unique estimation of DD parameters in the literature. Under this unambiguous condition, we further propose an Adam-Guided Iterative Refinement (AGIR) algorithm to optimize the sensing accuracy. Numerical results demonstrate the advantage of the proposed framework over existing designs, owing to the freedom offered by the 2D coprime condition in optimizing the sensing accuracy.

0.42

Receiver Design for Continuous-Time AFDM based on Pre-Filter De-Chirp

eess.SP ·2026-10-18 ·Qingyu Li, Shuangyang Li, Guanghui Liu, Fuchen Xu, Hongjun Liu
hot direction similarity 0.70
Abstract · Submitted to IEEE International Conference on Communications (ICC 2027)

Affine frequency division multiplexing (AFDM) is a promising waveform for future high-mobility communications due to its Doppler robustness and diversity gain. However, existing continuous-time AFDM relies on chirp-dependent wideband receive filtering, which increases noise power and causes channel-energy leakage. In this paper, we propose an AFDM reception scheme based on pre-filter de-chirp for doubly selective channels. The coupling between de-chirp and the channel is first characterized, yielding an equivalent path representation with delay-coupled effective Doppler shifts. The discrete affine Fourier transform (DAFT)-domain equivalent channel is then derived under general transmit pulse shaping and linear time-invariant receive filtering, showing that the effective filtering kernel depends only on the relative sample offset and avoids the additional spreading caused by conventional chirp-dependent filtering. The receive-noise power is further analyzed, and an explicit expression for the signal-to-noise ratio (SNR) gap is obtained by the required receive-filter bandwidths. Simulations verify the theoretical SNR analysis and show that the proposed scheme significantly outperforms the conventional scheme while approaching ideal discrete-time AFDM.

0.25

FM-OFDM: A Constant-Envelope Sensing Waveform with Phase-Differencing Receiver Processing

eess.SP ·2026-09-22 ·Amir Bouziane, Hüseyin Arslan
similarity 0.68
Abstract

Cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) is widely adopted as a reference waveform for integrated sensing and communication (ISAC). However, its high peak-to-average power ratio (PAPR) requires power amplifier back-off, thereby reducing the available sensing link budget. Frequency-modulated OFDM (FM-OFDM) provides a constant-envelope signal with 0 dB PAPR and has demonstrated reliable communication performance in high-mobility scenarios, but its sensing characteristics remain largely unexplored. This paper characterizes FM-OFDM as a sensing waveform based on its bandwidth, ambiguity function, sidelobe behavior, and Doppler estimation capability. The analysis shows that its data dependent sidelobe floor is incoherent and decreases through across frame integration, whereas the corresponding CP-OFDM floor remains unchanged. Consequently, under equal occupied bandwidth and transmit power, frame-level integration reverses the single-symbol performance ordering and provides FM-OFDM with approximately 20 dB of additional dynamic range for weak-target detection. Moreover, the zero-delay cut of the FMOFDM ambiguity function is shown to be deterministic and independent of the transmitted data realization, in contrast to linearly modulated waveforms, while a closed-form expression is derived for the sidelobe floor away from the zero-delay cut. Since the nonlinear mapping between the data symbols and time-domain samples prevents the direct application of the conventional CP-OFDM range-Doppler processing chain, a weighted phase-increment Doppler estimator is developed. The proposed estimator enables closed-form prediction of the sensing floor and its crossover point with a minimum computational complexity.

0.31

Ultra-High Resolution Method for Multipath Within a Co-Delay-Doppler Bin in DFT-P-OCDM

cs.IT ·2026-09-04 ·Mingxuan Han, Weile Zhang, Feifei Gao
similarity 0.67
Abstract

Communication systems can reuse their transmitted signals for sensing without dedicated radar transmissions. For an established DFT-preprocessed orthogonal chirp division multiplexing (DFT-P-OCDM) waveform, this task becomes difficult when several physical paths in a doubly selective channel fall into the same co-delay-Doppler bin. In this case, the number of resolvable delay classes inferred from the pilot may be smaller than the number of physical paths within the co-bin. This mismatch increases the difficulty of path number determination, fractional Doppler offset estimation, and channel reconstruction. We derive a pointwise relationship between the input and output in the DFT preprocessed Fresnel (DPF) domain for doubly selective channels with multiple paths within the co-delay-Doppler bin. Based on this input and output relation, we propose the two stage ultra high resolution (TSUR) framework. The first stage uses pilots of the phase progression to estimate delay, while the second stage uses the leakage samples to estimate the Doppler and the number of paths within each delay class. Furthermore, we derive CRLBs and analyze how the pilot configuration trades sensing resolution and communication recovery. Simulation results demonstrate that TSUR resolves same delay paths within a co-delay-Doppler bin, remains robust to exist delay offsets, and achieves lower fractional Doppler estimation errors than sequential extraction and off-grid baselines.

0.25

Model-Order-Adaptive Channel Estimation for AFDM Systems with Fractional Delay and Doppler

cs.IT ·2026-10-07 ·Ruizhe Wang, Cunhua Pan, Hong Ren, Shaohua Li, Jiangzhou Wang
hot direction similarity 0.67
Abstract

Affine frequency division multiplexing (AFDM) has emerged as a promising waveform for high-mobility communications owing to its ability to exploit multipath diversity. However, channel state information (CSI) acquisition remains challenging in channels with fractional delay and Doppler and an unknown number of propagation paths. In this paper, we investigate the channel estimation for AFDM systems. We first analyze the AFDM response in the presence of fractional-delay-induced frequency wrapping. The analysis reveals that fractional delay may displace the dominant extremum and generate informative secondary extrema. Then, we develop a model-order-adaptive channel estimator within an improved space-alternating generalized expectation-maximization (SAGE) framework. A dual-pilot reference symbol is employed for path and delay initialization, while pilot observations across multiple AFDM symbols provide temporal information for Doppler estimation. New paths are identified through statistically controlled residual tests, whereas unsupported or redundant paths are removed by conditional support pruning. The delay, Doppler frequency, and complex gain of each retained path are subsequently estimated through a coarse-to-fine procedure and refined using the exact AFDM likelihood. Simulation results demonstrate that the proposed method achieves lower normalized mean squared error (NMSE) and bit error rate (BER) than representative SAGE, sparse-recovery, and Bayesian benchmarks. It also provides reliable path detection and model-order estimation and maintains robust performance at terminal velocities of up to 600~km/h.

0.25

Impact of PA Nonlinearities on AFDM Sensing: A Matched Filtering Perspective

eess.SP ·2026-09-12 ·Eya Gourar, Yahia Medjahdi, Laurent Clavier, Abdul Karim Gizzini, Patrick Sondi
published similarity 0.65
Abstract · The manuscript was previously deposited in HAL (hal-05573928). Accepted for presentation at the 2026 IEEE International Conference on Integr…

Affine Frequency Division Multiplexing (AFDM) is a promising waveform for integrated sensing and communications (ISAC) due to its Doppler resilience. However, such waveforms exhibit a high peak-to-average power ratio (PAPR), and they require highly linear Power Amplifiers (PAs), which conflicts with ISAC requirements, where high transmit power for sensing is always beneficial. This paper investigates the impact of PA nonlinearities on the sensing performance of AFDM. Using the Bussgang decomposition of the nonlinearly amplified AFDM signal, we analyze the delay-Doppler ambiguity function for the sensing matched filtering and show that AFDM's sidelobes remain nearly unaffected. Simulation results confirm that AFDM outperforms OFDM in target detection under high Doppler and nonlinear amplification, highlighting its suitability for the sensing task.

0.41

AFDM-Enabled ISAC in Dynamic Environments: Fundamentals, Technologies and Opportunities

eess.SP ·2026-09-04 ·Linchu Chen, Zhendong Li, Zhou Su, Lin Chen, Wen Chen
similarity 0.65
Abstract

Dynamic environments pose fundamental challenges to integrated sensing and communication (ISAC), particularly due to severe Doppler effects, rapidly time-varying channels, and the intricate coupling between delay and Doppler shifts. Affine frequency-division multiplexing (AFDM), with its inherent capability of characterizing and separating delay and Doppler effects, has emerged as a promising waveform for dynamic ISAC. This article provides a comprehensive overview on AFDM-enabled ISAC in dynamic environments, covering its fundamental principles, distinctive advantages, representative application scenarios, and key enabling technologies. We first characterize the key features of ISAC in dynamic environments and introduce the fundamentals of AFDM, followed by an analysis of scenarios where AFDM can provide significant performance benefits. Then, several key enabling technologies for AFDM-based ISAC in dynamic environments are elaborated upon, accompanied by case studies on the critical aspects therein. Finally, open challenges and promising future research directions are discussed, aiming to provide a comprehensive reference for researchers and practitioners while inspiring further innovation in this emerging field.

0.21