CS Paper Radar

MTLiquid: Enabling Efficient Multi-Task Learning using Liquid Neural Networks for Lightweight Healthcare Monitoring Systems

Rachmad Vidya Wicaksana Putra, Fahad Abdul Rauf, Muhammad Shafique

cs.LG cs.NE ·submitted 2026-09-27 05:21 UTC · v1

Abstract

Continuous-time sensing and monitoring with timely and accurate decision-making are critical for many real-world applications. In healthcare monitoring systems, physiological signals are often available or sampled at irregular time intervals, hence requiring continuous-time processing to provide accurate prediction. Moreover, such systems often need to solve multiple detection/prediction tasks to provide a comprehensive patient review from different physiological aspects for more accurate decision-making. To solve this, continuous-time neural networks (CTNNs) can be employed. However, state-of-the-art works typically solve only one task at each network, thereby limiting their efficiency gains. To address this limitation, we propose MTLiquid, a novel methodology to enable efficient multi-task learning in continuous-time processing for healthcare monitoring systems through effective network design and training strategy. MTLiquid employs: (1) multiple input and output heads to accommodate different tasks, while sharing the same backbone network across tasks; as well as (2) an effective training strategy that leverages a loss-weighting technique to balance learning updates across different tasks and a proportional data presentation technique to address imbalanced dataset sizes. Experimental results for mortality prediction (P12) and sepsis early detection (P19) tasks for ICU patients show that, MTLiquid achieves strong performance (AUROC: 0.84 for P12 and 0.94 for P19) comparable to the state-of-the-art single-task learning in both continuous-time networks (AUROC: 0.84 for P12 and 0.95 for P19) and discrete-time networks (AUROC: 0.79-0.82 for P12 and 0.92-0.94 for P19), while incurring significantly smaller memory cost by 44%-94%. These results highlight the potential of our MTLiquid methodology to enable lightweight continuous-time healthcare monitoring systems for better decision-making.

Comment
8 pages, 1 figure, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

On the Potential of Multi-Task Learning in Predictive Process Monitoring

cs.LG ·2026-09-11 ·Lukas Kirchdorfer, Keyvan Amiri Elyasi, Heiner Stuckenschmidt
published similarity 0.63
Abstract · Accepted for publication in the Proceedings of the 60th Hawaii International Conference on System Sciences (HICSS-60)

Predictive Process Monitoring (PPM) forecasts how ongoing organizational processes unfold, enabling information systems to move beyond execution support toward proactive analysis and monitoring. Although deep learning has improved prediction accuracy in PPM, most approaches follow a single-task learning (STL) setup, training a separate model per task. This increases maintenance effort and overlooks potential synergies. Multi-task learning (MTL), which jointly learns multiple prediction targets in one model, offers a promising alternative, yet its effectiveness in PPM remains underexplored. It remains unclear whether and under which settings MTL improves upon STL, which prediction tasks benefit most from joint learning, which task combinations are particularly synergistic, and if and how tasks should be balanced. To fill this gap, we present the first comprehensive empirical study of MTL for PPM, evaluating a variety of task combinations, neural architectures, and optimization methods. Overall, our results position MTL as a strong paradigm for PPM: we see substantial improvements in next-activity prediction and inherent mitigation of class imbalance using MTL, while task balancing is especially critical under low-capacity models.

0.30

Primal--Dual Alternating Neural Learning for Timely Classification with Performance Guarantees

cs.LG stat.MLstat.ME ·2026-08-24 ·Jiaming Qiu, Yingye Zheng, Ying-Qi Zhao
similarity 0.62
Abstract

Timely risk classification is essential in many clinical monitoring settings, where decisions must balance the benefit of classifying patients early for subsequent intervention against the value of observing additional data. Yet most existing statistical and machine-learning methods are designed for fully observed trajectories and offer limited control over key operating characteristics such as sensitivity, specificity, and monitoring cost. We cast the sequential classification problem within a multi-objective optimization framework targeting these three criteria. We characterize the optimal decision rule through a value recursion that quantifies, at each time point, the trade-off between immediate classification and continued monitoring. To estimate the rule from data, we formulate a constrained optimization problem that maximizes specificity while enforcing prespecified sensitivity and monitoring-cost constraints. We then develop an estimation procedure that employs a recurrent neural network to approximate the evolving value processes and a primal--dual updating scheme to satisfy the performance constraints. Through simulation studies and an application to continuous glucose monitoring for hypoglycemia risk prediction, we demonstrate that the proposed method yields accurate and timely sequential decision rules that adhere to the desired operating characteristics.

0.14

LukeNet: A lightweight CNN integrated with an XAI model for Smart acute lymphoblastic leukemia detection and management

cs.CV cs.AIcs.NE ·2026-09-22 ·Md Taimur Ahad
similarity 0.61
Abstract

Acute Lymphoblastic Leukemia (ALL) patients require early, accurate detection to enable timely treatment and effective patient management. A Convolutional Neural Network (CNN) is well-suited for creating an end-to-end enabling environment for ALL detection and classification. However, most CNN-based ALL detection systems are theoretical and unsuitable for deployment on edge devices due to high computational demands. The Internet of Medical Things (IoMT)-enabled devices offer an opportunity to monitor ALL patients in real time. Wearables that track temperature, heart rate, oxygen saturation, and activity can deliver critical data to support timely clinical intervention and improve patient outcomes. In smart IoMT environments, a lightweight CNN is essential because connected devices often operate under limited computational power, memory, and latency constraints. To address this need, this study proposes LukeNet, a lightweight CNN integrated with explainable artificial intelligence (XAI) for an IoMT-based SMART Acute Lymphoblastic Leukemia Detection and Management System. Trained on three (3) ALL datasets and five-fold cross-validation, LukeNet achieved an impressive 99% model accuracy as well as 99% unseen test accuracy, which is higher than six state-of-the-art (SOTA) CNNs, such as DenseNet121, MobileNet, ResNet50, InceptionV3, Xception, and VGG16, as well as transfer learning models. Furthermore, LukeNet was compared with two ensemble models. In addition, explainable AI methods are integrated to highlight relevant regions in microscopic images. The novelty of this study lies in the architecture of LukeNet, which balances model depth and computational efficiency by using depthwise separable convolutions, mitigates the risk of gradient loss in deeper layers, and provides strong global and local feature extraction capabilities.

0.14

Scalable Clinical Data Infrastructure and Comparative ML Evaluation for Hospitalisation Risk Prediction in Elderly Patients with Multiple Long-Term Conditions using CPRD

cs.LG cs.AI ·2026-08-29 ·Asra Aslam, Volodymyr Chapman, Maurice M. O'Connell, Aseel S. Abuzour, Michael Abaho +7 more
benchmarkposition similarity 0.60
Abstract

Deep learning architectures are increasingly proposed for patient trajectory modeling in electronic health records (EHRs), yet their advantage over simpler, more interpretable models is rarely subjected to rigorous empirical scrutiny in real-world clinical settings. We present a comprehensive patient timeline pipeline applied to elderly patients in CPRD Aurum, incorporating 260 clinical conditions classified via a three-tier automated framework including specialised detection logic for 17 complex conditions. Using this infrastructure, we benchmark Temporal Graph Convolutional Neural Networks (TG-CNN) against Logistic Regression with LASSO regularisation and Random Forests for predicting 12-month all-cause emergency hospitalisation risk, motivated by (but not filtered to) the elevated risk of adverse drug reactions. Under cross-validation, TG-CNN achieves a marginally higher mean AUC-ROC than LASSO (0.712 vs. 0.705), whereas on the held-out test set LASSO achieves the highest discrimination of three models (AUC-ROC 0.733, versus 0.710 for Random Forest and 0.702 for TG-CNN). We show, that discrimination alone is an incomplete criterion for clinical deployment: after Platt calibration, LASSO is the only model with an acceptable calibration slope (0.817), while Random Forest (0.759) and, TG-CNN (0.391) remain substantially miscalibrated. We argue that LASSO, not the highest-discriminating model, is the model best suited to direct clinical deployment. We present lessons for the machine learning and healthcare community regarding data infrastructure, model selection, and value of calibration and interpretability in high-stakes decision support.

0.17

Hydra: Towards Transferable Multi-Task Learning on Temporal Graphs

cs.LG cs.AI ·2026-11-08 ·Kiarash Shamsi, Farimah Poursafaei, Tran Gia Bao Ngo, Reihaneh Rabbany, Baris Coskunuzer +4 more
similarity 0.60
Abstract

Real-world evolving networks are naturally modeled as temporal graphs (TGs), where capturing temporal dynamics is essential for predicting future graph properties that support downstream decision-making. Existing temporal graph methods have been developed primarily for single-task prediction, and little is known about their generalization across tasks or transfer to unseen networks. This leaves the challenge of multi-task graph property prediction in TGs largely open. We address this challenge by introducing Hydra, a novel architecture that integrates local connectivity features from temporal GNNs with a spectral learning module that captures global connectivity patterns. This design enables joint learning of local and global information under a multi-task objective. In multi-task classification, Hydra achieves an 8.9% relative gain in AUC over the strongest competitor. In multi-task regression, Hydra achieves competitive results in all three tasks, while obtaining the best results in two tasks with a 8.2% relative gain in MAE compared to the strongest baseline. Moreover, Hydra delivers these gains with a 22% reduction in training time compared to temporal transfer models. These results provide the first systematic evidence that multi-task transferable learning on temporal graphs is effective. By delivering consistent top-ranked performance, Hydra highlights multi-task training on temporal graphs as a promising direction toward adaptable foundation models for temporal graphs.

0.22

TSPFN: A Temporal Tabular Foundation Model for Physiological Time Series Classification

cs.LG cs.CV ·2026-08-31 ·Jérémie Stym-Popper, Clément Rambour, Federica Granese, Nicolas Thome, Olivier Bernard
publishedcode/data similarity 0.60
Abstract · Accepted at STACOM 2026 (MICCAI Workshop). 10 pages, 3 figures

Designing models that generalize effectively in low- to medium-data regimes remains a primary challenge in medical machine learning, particularly for physiological time-series classification. While tabular foundation models such as TabPFN offer an attractive alternative to conventional fine-tuning through in-context learning, they are not designed to capture the temporal dependencies inherent to physiological signals. ~In this paper, we introduce TSPFN, a foundation model that redesigns TabPFN's architecture for time series data. TSPFN integrates structured temporal representations and positional embeddings to capture intra-sample temporal and channel dependencies. To fully leverage its spatio-temporal design, the model is pretrained on 140,000 real-world physiological time series across multiple medical domains. This yields a unified, generalizable framework capable of learning the specificities of medical time series. Experiments across diverse physiological benchmarks demonstrate that TSPFN consistently outperforms standard tabular baselines and TabPFN, and achieves superior cross-domain generalization compared to specialized deep time-series models. All our experiments, ablation studies, and pre-processing scheme are publicly available at https://github.com/Jeremstym/TSPFN

0.48

Continuous-Time Machine Learning: A Unified Mathematical Perspective

cs.LG cs.AI ·2026-09-15 ·Waleed Razzaq, Yun-Sheng Zhao, Yun-Bo Zhao
surveybenchmark similarity 0.60
Abstract

Continuous-time (CT) machine learning has emerged as a principled framework for modeling temporal dynamics as a continuous process, particularly when observations are sampled at arbitrary time points or span long-range horizons. However, major branches of CT machine learning have matured in separate research communities, leaving their mathematical relationships and design trade-offs insufficiently characterized. In this survey, we develop a unified, concept-driven view of major CT machine learning branches through a taxonomy that organizes families according to their underlying base mathematical formulations. We present a canonical mathematical formulation that relates these families through different architectural choices of vector-field parameterization, stochasticity, memory mechanisms, and discretization. We compare training algorithms, optimization strategies, and failure modes, highlighting the trade-offs across families. We further provide a comparative analysis of theoretical computational complexity alongside an illustrative architecture-controlled benchmark analysis on representative architectures from each family. We also review software ecosystems supporting their implementation. Finally, we identify open challenges in approximation theory, training stability, hardware-efficient implementations, benchmarking, foundation models, and scientific machine learning, and discuss an agenda for future research.

0.21

Multi-Task Learning for Sparsely-Labeled Time Series: A Case Study on Cold-Hardiness Modeling

cs.LG ·2026-09-08 ·Aseem Saxena, Paola Pesántez-Cabrera, Markus Keller, Alan Fern
similarity 0.59
Abstract

We present a real-world case study of multi-task learning (MTL) for temporal process modeling from limited data with temporally sparse labels. Specifically, we investigate multi-task learning for the important agricultural problem of predicting grape cold hardiness, which is the temperature at which lethal freezing occurs. Cold hardiness changes in response to weather and is difficult to measure directly in the field. Thus, growers rely on predictions to decide when to apply costly frost mitigation measures. We apply recurrent neural networks (RNNs) for daily cold-hardiness prediction from time series weather data. A major challenge is that the cold hardiness response varies across plant cultivars and ground-truth data for each cultivar is temporally sparse and limited. To address this challenge, we investigate multi-task learning (MTL) approaches for combining data, where different tasks correspond to different cultivars. We develop a variety of MTL architectures and evaluate them in both MTL and transfer learning settings. Our results show significant differences between architectures and that certain architectures are able to consistently outperform single-task learning and state-of-the-art scientific models. Additionally, we show similar results for the qualitatively different, but related, task of budbreak prediction. Further, improved accuracy for budbreak and cold hardiness is achieved by a single MTL model that simultaneously learns both tasks.

0.06