CS Paper Radar

LukeNet: A lightweight CNN integrated with an XAI model for Smart acute lymphoblastic leukemia detection and management

Md Taimur Ahad

cs.CV cs.AIcs.NE ·submitted 2026-09-22 16:36 UTC · v1

Abstract

Acute Lymphoblastic Leukemia (ALL) patients require early, accurate detection to enable timely treatment and effective patient management. A Convolutional Neural Network (CNN) is well-suited for creating an end-to-end enabling environment for ALL detection and classification. However, most CNN-based ALL detection systems are theoretical and unsuitable for deployment on edge devices due to high computational demands. The Internet of Medical Things (IoMT)-enabled devices offer an opportunity to monitor ALL patients in real time. Wearables that track temperature, heart rate, oxygen saturation, and activity can deliver critical data to support timely clinical intervention and improve patient outcomes. In smart IoMT environments, a lightweight CNN is essential because connected devices often operate under limited computational power, memory, and latency constraints. To address this need, this study proposes LukeNet, a lightweight CNN integrated with explainable artificial intelligence (XAI) for an IoMT-based SMART Acute Lymphoblastic Leukemia Detection and Management System. Trained on three (3) ALL datasets and five-fold cross-validation, LukeNet achieved an impressive 99% model accuracy as well as 99% unseen test accuracy, which is higher than six state-of-the-art (SOTA) CNNs, such as DenseNet121, MobileNet, ResNet50, InceptionV3, Xception, and VGG16, as well as transfer learning models. Furthermore, LukeNet was compared with two ensemble models. In addition, explainable AI methods are integrated to highlight relevant regions in microscopic images. The novelty of this study lies in the architecture of LukeNet, which balances model depth and computational efficiency by using depthwise separable convolutions, mitigates the risk of gradient loss in deeper layers, and provides strong global and local feature extraction capabilities.

Closest papers

Nearest neighbours by meaning across the whole index.

BrainAid: Efficient Brain Tumor Detection Using Lightweight CNNs and Explainable AI for Resource-Constrained Environments

cs.CV ·2026-10-10 ·Sai Sriram Gonthina, Ross Gore, Bikash Chandra Singh, Pronaya Bhattacharya, Sachin Shetty +2 more
similarity 0.69
Abstract

A brain tumor is an unusual growth of cells in the brain that can be cancerous or not, affecting normal brain function and causing serious risk to health. Existing solutions for brain tumor classification, such as expert manual evaluations of magnetic resonance imaging (MRI) scans, are generally inconsistent as different professionals have different criteria and can be resource-intensive, leading to delayed diagnoses. Additionally, while deep learning models have demonstrated potential, they typically require significant computational resources, motivating the need for more efficient and accessible diagnostic tools that can be deployed in real-time healthcare settings. To address these limitations, this study presents BrainAid, which makes efficient use of Convolutional Neural Networks (CNNs) and Vision Transformers (ViTs) for effective classification of four-class classification of glioma, meningioma, pituitary tumor, and no-tumor MRI scans, outperforming all the standard models such as VGG16, Inception-V3, ResNet-50 and so, while integrating Explainable AI (XAI) to improve interpretability. The BrainAid is trained to classify tumors with a high precision of 98%, achieving an F1 score of 98% and an accuracy of 98% using publicly available dataset. The model is deployed on a Raspberry Pi, demonstrating efficiency in low-resource environments. This system shows the feasibility of real-time, edge-based tumor classification, providing quick diagnostic support for medical professionals and enhancing patient care in resource-limited healthcare facilities and underserved areas.

0.07

X-Beat: An Explainable Framework for ECG Image Classification

cs.CV ·2026-09-18 ·Mohammad Sadman Tahsin, Haitham Y. Adarbah, Afzel Noore
benchmark similarity 0.68
Abstract · Accepted to the Workshop on Data Quality Aware, High-Performance, and Trustworthy AI Systems for Healthcare at IEEE/ACM CHASE 2026

Accurate automated interpretation of electrocardio- grams (ECGs) is essential for early detection of cardiac condi- tions such as myocardial infarction and rhythm abnormalities. However, many high-performing deep learning models remain difficult to deploy in clinical settings due to limited transparency and lack of reliability validation. In this work, we present X- Beat, an explainable and reliability-aware benchmark framework for ECG image classification designed to support trustworthy AI systems in healthcare. The proposed framework combines transfer learning with post-hoc explainability and systematic reliability evaluation across four cardiac classes: Abnormal Heartbeat, History of Myocardial Infarction, Myocardial In- farction, and Normal Heartbeat. Multiple ImageNet-pretrained CNN backbones, including EfficientNet-B0, ResNet-50, DenseNet- 121, and MobileNetV3-Large, are evaluated under a unified training protocol. Beyond standard performance metrics, we incorporate Grad-CAM-based visual explanations together with additional analyses, including explanation stability, regional sen- sitivity, and confidence-based reliability assessment, to examine whether model predictions are supported by clinically meaningful evidence. Experimental results show that ResNet-50 achieves the best performance, reaching 91.94% accuracy and a macro F1- score of 0.9098, with strong class separability (AUC up to 0.995). Explanation analyses indicate that the model primarily focuses on waveform-relevant regions, while reliability evaluation suggests that most incorrect predictions occur with lower confidence. Overall, this work provides a structured and reproducible bench- mark for evaluating both predictive performance and explanation reliability in ECG image classification, contributing toward the development of trustworthy and interpretable AI components for clinical decision support systems.

0.41

A Lightweight CNN Integrated Compact Convolutional Transformer for Multi-Scale Feature Learning and reducing computational complexity for breast cancer mammography image detection and classification

cs.LG cs.AIcs.CV ·2026-09-16 ·Md Taimur Ahad, Ainuddin Ahmed
similarity 0.65
Abstract

Over the years, Convolutional Neural Networks (CNNs) have demonstrated strong capability in cancer detection and classification using medical images. However, CNN-based models often struggle to capture long-range contextual dependencies. In such scenarios, integrating Compact Convolutional Transformer (CCT) architectures after the CCT layer allows CNN-extracted features to reshape into compact patch tokens using a CCT tokenizer, followed by the addition of positional embeddings to preserve spatial structure. Using 5-fold cross-validation, the model was tested on 3 sets of breast cancer mammography. With only 250,435 parameters, the model achieved 99%-100% accuracy across 3 datasets, indicating robust generalization. Explainable AI (XAI) was integrated into the model to explain the breast cancer classification process to enhance clinical trust. The results indicate that the proposed framework is suitable for computer-aided diagnosis systems, particularly in resource-constrained clinical environments. The novelty of the proposed CNN-integrated CCT overcomes the limitation of CNN's gradient degradation in the last layers by integrating convolutional tokenization with transformer-based learning. Lighter than ViT, which is effective in capturing long-range dependencies, the model has also proven efficient in breast cancer classification by capturing long-range dependencies among breast tissue regions.

0.20

Robust Lightweight Deep Learning Models for Oral Cancer Screening

cs.AI ·2026-08-21 ·Siddhant Bharadwaj, Aakash Shedsale, Tejashree Subramanya, Mohd. Azfar, Praveen Birur +4 more
published similarity 0.63
Abstract · 10 pages, 3 figures, Paper accepted for the 6th International Conference on AI-ML Systems, 2026

Oral cancer is a leading cause of mortality in low-to-middle-income countries, where a shortage of specialists delays diagnosis. While point-of-care screening via smartphones offers a scalable solution, developing robust AI for resource-constrained settings poses significant challenges, including class imbalance in training data, variable data quality, and computational constraints on edge devices. In this paper, we present the optimisation of lightweight deep learning models for smartphone-based oral cancer screening. Using a diverse, multi-centre retrospective dataset of approximately 30,000 images acquired over a decade, we systematically evaluate state-of-the-art convolutional, transformer, and hybrid architectures. Through rigorous pipeline ablation, we demonstrate that directly optimising hybrid architectures for the edge strictly outperforms computationally heavy paradigms, such as large models or knowledge distillation. Furthermore, interpretability analysis and simulated noise-stress tests revealed that the system anchors on clinical features and remains robust to unstructured sensor noise, despite vulnerabilities to impulse bit errors. In the held-out test set, our optimised MobileViTv2 models achieved an average sensitivity of 83.2 $\pm$ 1.5% and an average specificity of 86.0 $\pm$ 0.8%, with the best model exhibiting 87.4% sensitivity, 86.5% specificity, and a critical negative predictive value of 97.2% with reference to specialist labels. These results confirm that with targeted architectural selection and streamlined optimisation, interpretable and robust lightweight AI models exhibit high potential for edge deployment to enable automated triage in primary care settings.

0.30

picoEmergencyNet : Attention-Enhanced Ultra-Small Deep Learning Model for Aerial Image Classification in Emergency Monitoring

cs.CV ·2026-11-10 ·Christos Kyrkou
published similarity 0.62
Abstract · 6 pages, Appeared in IJCNN2026 C. Kyrkou, "picoEmergencyNet: Attention-Enhanced Ultra-Small Deep Learning Model for Aerial Image Classificat…

Real-time disaster recognition from aerial imagery requires deep learning models that operate under strict memory, compute, and latency constraints. While recent approaches achieve high accuracy, their computational cost limits deployment on resource-constrained UAV platforms. This work introduces picoEmergencyNet, an ultra-lightweight convolutional neural network designed for aerial image disaster classification. The proposed architecture combines depthwise dilated convolutions with efficient channel attention and channel shuffling to enable multi-scale feature extraction at minimal computational cost. picoEmergencyNet has 23k parameters and 7M FLOPs, requiring only 0.1 MB of model storage. Evaluated on the AIDER and AIDERv2 disaster datasets, it achieves up to 96.1% accuracy, matching or exceeding state-of-the-art lightweight models that are orders of magnitude larger. Deployment experiments on the NVIDIA Jetson AGX Orin show that, without hardware-specific optimizations, picoEmergencyNet achieves 258 FPS on GPU and 46 FPS on CPU with a 7x lower activation memory footprint compared to competing models. These results demonstrate that careful architectural specialization, rather than model scaling, enables highly efficient and accurate TinyML-ready disaster recognition for real-time UAV-based emergency monitoring.

0.35

ThyCLIPNet: A BiomedCLIP-Guided Lightweight Attention-Enhanced DeepLabV3+ Framework for Robust Thyroid Nodule Segmentation

cs.CV ·2026-10-03 ·Tasnim Jahan, Md Easin Arafat, Swakkhar Shatabda
code/data similarity 0.61
Abstract

Accurate thyroid ultrasound segmentation is often challenged by low contrast, speckle noise, and unclear boundaries. Although recent methods have improved segmentation accuracy, many rely on resource-intensive architectures or lack explicit integration of multiscale features with global biomedical visual guidance. In this paper, we introduce ThyCLIPNet, a lightweight semantic-guided hybrid encoder-decoder framework that integrates BiomedCLIP-derived biomedical semantic guidance into a lightweight multi-scale CNN segmentation pipeline. The encoder integrates MobileNetV2 with efficient channel attention, while atrous spatial pyramid pooling and a custom convolutional block attention module enrich bottleneck features. The decoder combines hierarchical skip connections and lightweight attention refinement with a BiomedCLIP-guided gated fusion pathway that projects vision-only global biomedical embeddings into decoder feature space and selectively integrates them through semantic-local fusion and spatial gating. To the best of our knowledge, ThyCLIPNet is among the first lightweight thyroid ultrasound segmentation frameworks to use BiomedCLIP's vision encoder alone for image-only global semantic guidance without text prompting. Experiments on TG3K, TN3K, DDTI, and PKTN achieve dice similarity coefficients of 96.22%, 87.58%, 84.73%, and 80.70%; intersection over union scores of 92.72%, 77.91%, 73.51%, and 67.64%; and 95th-percentile hausdorff distances of 3.75, 16.38, 18.23, and 10.86, respectively. ThyCLIPNet uses 8.55M parameters and 22.99G FLOPs. Overall, the results support integrating global biomedical semantic guidance with lightweight multi-scale CNN representations for robust and computationally efficient thyroid ultrasound segmentation. Source code: https://github.com/Tasnim-Jahan/ThyCLIPNet. [Abstract shortened for arXiv. See PDF for full abstract.]

0.20

NanoNet: Ultra-Lightweight Network for MRI Brain Tumor Classification toward Edge AI

cs.CV ·2026-11-08 ·Tran Nguyen-Le, Huu-Thuan Huynh, Minh-Triet Tran, Trung-Nghia Le
benchmark similarity 0.61
Abstract

Automated brain tumor classification from magnetic resonance imaging (MRI) can support accessible medical image analysis, but conventional deep learning models often exceed the resource budgets of highly constrained edge-AI platforms. We present NanoNet, an ultra-lightweight convolutional neural network designed for resourceconstrained MRI classification and motivated by future edge-AI applications. Inspired by MobileNetV2, NanoNet substantially reduces network depth, channel capacity, expansion ratios, and final feature dimensionality, resulting in only five inverted residual blocks and 8,132 parameters. We further investigate dependency-aware structured pruning, knowledge distillation, and INT8 quantization-aware training for additional compression. Experiments on the BRISC 2025 benchmark show that NanoNet achieves 92.80% accuracy and 92.97% macro F1 with 8,132 parameters and 10.498 MFLOPs. Across three compression seeds, it exceeds the mean accuracy of 70%-pruned MobileNetV2 by 5.20 percentage points while using 60.2% fewer parameters and 9.8% less computation. Converted INT8 NanoNet achieves 89.70% accuracy and 90.22% macro F1 across three QAT seeds. Earlier TensorFlow Lite measurements indicate 27.7 KB of baseline model storage, motivating future edge-AI deployment.

0.12

MTLiquid: Enabling Efficient Multi-Task Learning using Liquid Neural Networks for Lightweight Healthcare Monitoring Systems

cs.LG cs.NE ·2026-09-27 ·Rachmad Vidya Wicaksana Putra, Fahad Abdul Rauf, Muhammad Shafique
similarity 0.61
Abstract · 8 pages, 1 figure, 2 tables

Continuous-time sensing and monitoring with timely and accurate decision-making are critical for many real-world applications. In healthcare monitoring systems, physiological signals are often available or sampled at irregular time intervals, hence requiring continuous-time processing to provide accurate prediction. Moreover, such systems often need to solve multiple detection/prediction tasks to provide a comprehensive patient review from different physiological aspects for more accurate decision-making. To solve this, continuous-time neural networks (CTNNs) can be employed. However, state-of-the-art works typically solve only one task at each network, thereby limiting their efficiency gains. To address this limitation, we propose MTLiquid, a novel methodology to enable efficient multi-task learning in continuous-time processing for healthcare monitoring systems through effective network design and training strategy. MTLiquid employs: (1) multiple input and output heads to accommodate different tasks, while sharing the same backbone network across tasks; as well as (2) an effective training strategy that leverages a loss-weighting technique to balance learning updates across different tasks and a proportional data presentation technique to address imbalanced dataset sizes. Experimental results for mortality prediction (P12) and sepsis early detection (P19) tasks for ICU patients show that, MTLiquid achieves strong performance (AUROC: 0.84 for P12 and 0.94 for P19) comparable to the state-of-the-art single-task learning in both continuous-time networks (AUROC: 0.84 for P12 and 0.95 for P19) and discrete-time networks (AUROC: 0.79-0.82 for P12 and 0.92-0.94 for P19), while incurring significantly smaller memory cost by 44%-94%. These results highlight the potential of our MTLiquid methodology to enable lightweight continuous-time healthcare monitoring systems for better decision-making.

0.21