CS Paper Radar

From Grey-Box to Green-Box: When can Physics-Informed Machine Learning Reduce Carbon Footprints in Structural Health Monitoring?

Daisy R. Bradley, Nathan A. Hinchliffe, Daniel J. Pitchforth, Matthew R. Jones, Elizabeth J. Cross

cs.LG ·submitted 2026-09-27 09:08 UTC · v2

Abstract

Machine learning plays an increasingly vital role in engineering, but the corresponding increase in compute time is not without environmental cost. Physics-informed machine learning or "grey-box" models have been developed to overcome some of the limitations of traditional black-box learners, utilising the physical insight that an engineer would have about the structure they are modelling and have shown promising results in the structural engineering field among many others. This work explores whether an additional advantage could be a reduced environmental impact, considering the relationship between training data quantity and training time, linking this duration to carbon emissions from computing. In a structural health monitoring context, four physics-informed machine learning approaches - spanning Gaussian processes and neural networks - are evaluated: residual modelling, input augmentation, hybrid modelling, and constrained learning. The emissions for training each of the models to reach a given error threshold is compared, and in most examples, shown to be lower for the physics-informed models (with input augmented models being an exception). This reduction in training emissions further compounds the environmental savings achieved by collecting and storing less data. Although promising results, we cannot expect a silver bullet and the case studies demonstrate that a trade-off is needed between the increased complexity that comes from introducing physics into a machine learner, against the gain from reduced training data requirements.

Comment
27 pages, 15 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Information fusion and machine learning for sensitivity analysis using physics knowledge and experimental data

cs.CE cs.LGstat.MEstat.ML ·2026-08-18 ·Berkcan Kapusuzoglu, Sankaran Mahadevan
publishedcode/datahighly cited similarity 0.68
Abstract · Reliability Engineering & System Safety

When computational models (either physics-based or data-driven) are used for the sensitivity analysis of engineering systems, the sensitivity estimate is affected by the accuracy and uncertainty of the model. This paper considers global sensitivity analysis (GSA) for situations where both a physics-based model and experimental observations are available, and investigates physics-informed machine learning strategies to effectively combine the two sources of information in order to maximize the accuracy of the sensitivity estimate. Two representative machine learning (ML) techniques are considered, namely, deep neural networks (DNN) and Gaussian process (GP) modeling, and two strategies for incorporating physics knowledge within these techniques are investigated, namely: (i) incorporating loss functions in the ML models to enforce physics constraints, and (ii) pre-training and updating the ML model using simulation and experimental data respectively. Four different models are built for each type (DNN and GP), and the uncertainties in these models are included in the Sobol indices computation. The DNN-based models, with many degrees of freedom in terms of model parameters and training options, are found to result in smaller bounds on the sensitivity estimates when compared to the GP-based models. The proposed methods are illustrated for additive manufacturing and lake temperature modeling examples.

0.62

Physics-informed neural networks in the small-data regime: A controlled comparison with classical PDE surrogates

cs.CE cs.AImath.NA ·2026-11-09 ·Kirill Katsuba, Oleg Rudenko, Egor Bugaev, Alexander Tarakanov
similarity 0.64
Abstract

Neural surrogates for engineering models are often trained on large collections of simulated solutions. We investigate whether physics-informed neural networks (PINNs) can achieve accurate predictions from scarce labelled observations by incorporating governing equations and prescribed initial and boundary conditions. We introduce hierarchical loss weighting (H-PINN) and its gradient-direction-aware extension (HO-PINN), which adjust the emphasis on physical constraints according to higher-priority losses. Hierarchical PINNs are compared with Vanilla PINN, tuned gradient boosting, support-vector regression, and Gaussian-process regression on a heat equation and three heterogeneous two-phase-flow benchmarks. Experiments use 20--1000 labelled states and ten paired seeds. Each label is one coordinate--state observation, not a complete simulation. At least one PINN variant achieves the highest mean primary-target \(R^2\) in each interpolation and equation-assisted forecasting comparison at 20 and 50 labels. The advantage for water saturation persists across all tested budgets. Hierarchical weighting reduces variability across runs in selected settings. These results demonstrate that known physics can support accurate neural surrogate predictions from very few solution observations, at substantially higher fitting cost than the tested classical regressors.

0.22

The Smart Buildings Challenge: Learning Foundation Models for Real-World Optimization at Scale

cs.AI ·2026-10-13 ·Judah Goldfeder, Ayush Rai, Philippe M. Wyder, Na Li, Victoria Dean +9 more
similarity 0.63
Abstract · This is for a Neurips 2026 competition

Buildings cause nearly 40\% of carbon emissions in the US. Of total building emissions, HVAC systems are responsible for approximately 40-60\% and account for 15\% of global energy consumption. Despite advances in artificial intelligence, most buildings still operate as inefficiently as they did decades ago. Building optimization, perhaps more so than any other optimization problem, has enormous potential for Machine Learning (ML) driven impact on climate change, in both the short and long term. One of the biggest obstacles for building optimization is the lack of policy transfer. Most building control systems, whether simulation or learning based, don't generalize: they only work well for the building they were developed for, but not for other buildings. To solve this problem, we propose a challenge for the development of building foundation models that easily adapt to new buildings with minimal configuration and thereby enable building optimization to scale across the globe. Participants will build control policies on a set of simulated buildings, and have their policies evaluated on an unseen set of buildings. The buildings vary in size, layout, weather, material properties, and HVAC system. Successful outcomes from this initiative promise a massive leap forward in global sustainability efforts and demonstrate the great potential of ML to combat climate change.

0.33

Choosing an energy-efficient software architecture for building system diagnostic support

cs.SE cs.AI ·2026-10-05 ·Roxane Koitz-Hristov, Franz Wotawa
similarity 0.61
Abstract

Around 30\% of global energy expenditure can be attributed to the building sector, where a large portion of energy-consumption could be avoided by repairing existing faults. Fault detection and diagnosis (FDD) software addresses this issue; however, its creation and operation also have an environmental impact. The magnitude of this impact is influenced by the diagnosis architecture, as different architectures and methods have different energy demands. Yet, simply considering the energy consumed by the software itself is not sufficient to assess its overall environmental impact, since the diagnostic performance, e.g., number of detected faults or number of faults missed, also contributes to its ecological footprint. In this paper, we propose an energy-consumption model that considers FDD performance and energy spend directly by the diagnosis software. In an initial experiment, we compare several FDD architecture families, i.e., rule-based, model-based, classical machine learning, and large-language-model-based, in simulation using performance and energy-consumption values collected from prior literature. The results show that considering the computational energy and accuracy of FDD can change the relative benefit of the different approaches. Computationally efficient machine learning methods, such as random forest, provide the largest net savings on smaller buildings, whereas more resource-intensive approaches, such as fine-tuned large language models, become advantageous as building size increases. Our findings suggest that overall energy efficiency depends not only on the computational demand of the FDD software, but also on its diagnostic performance and the scale of the building.

0.24

Physics-Informed Machine Learning in Prognostics and Health Management: A Systematic Literature Review

cs.LG cs.AI ·2026-08-10 ·Christopher Braun, Julian Raible, Marco F. Huber
publishedsurvey similarity 0.61
Abstract · The version of record of this article, first published in Journal of Intelligent Manufacturing, is available online at: https://link.springe…

In modern industry, keeping complex systems reliable, safe, and efficient hinges on Prognostics and Health Management (PHM). Machine Learning (ML) has largely driven advancements in diagnostics and prognostics, yet purely data-driven models face inherent limitations, such as poor generalization, an inability to infer causal relationships, and a lack of interpretability. Physics-Informed Machine Learning (PIML) helps mitigate these limitations by incorporating prior physical knowledge directly into the ML pipeline, thereby fostering growing interest in its application to PHM. This work investigates how PIML is being leveraged in the context of PHM through a systematic literature review of 212 studies. The review introduces a four-class classification scheme, consisting of observational bias, inductive bias, learning bias, and hybrid approaches, and further categorizes studies by PHM task. Across all four classes, the reviewed studies consistently demonstrate improved predictive performance over conventional baselines across a broad range of assets, although the literature is heavily skewed toward lithium-ion batteries and bearings, and dominated by problem-specific solutions. Overall, the review indicates that physics-informed approaches already provide tangible benefits, whereas claims of improvements concerning some of the aforementioned limitations lack sufficient supporting evidence. Future research should prioritize transferable design patterns, benchmarks comparing integration strategies, and uncertainty-aware models that are lightweight and robust enough for online deployment in real-world settings.

0.62

Atoms to Processes: The Role of Artificial Intelligence and Machine Learning in Chemical Engineering

cs.AI ·2026-10-01 ·Michael Baldea, Linda J. Broadbelt, Marianthi G. Ierapetritou, Akhilesh Jain, Ankur Kumar +15 more
published similarity 0.60
Abstract

The rapid maturation of artificial intelligence (AI) and machine learning (ML) has catalyzed a profound shift in how chemical engineering problems are formulated, analyzed, and solved. Advances in computing, data availability, and learning algorithms have enabled AI/ML methods to impact applications spanning atomic-scale simulations, materials and catalyst discovery, transport and thermodynamics, separations, process systems engineering, and industrial operations. This article provides a perspective on recent methodological developments and representative applications, emphasizing how AI/ML tools are being integrated with first-principles models to address challenges of predictive accuracy, data scarcity, extrapolation, interpretability, and model lifecycle management. Across domains, a unifying trend is the move away from purely black-box approaches toward hybrid and physics-informed frameworks that explicitly respect conservation laws, thermodynamic consistency, and known structural constraints. These approaches not only improve robustness and reliability, but also enable meaningful human-AI collaboration by providing information at an appropriate level of abstraction for the task and decision context. We conclude that AI and ML are not replacing the core principles of chemical engineering; rather, they are amplifying them. As the field advances toward increasingly autonomous, adaptive, and sustainable systems, the thoughtful integration of AI/ML with first-principles understanding and domain expertise will be essential to realizing their full potential across both research and industrial practice.

0.25

Physical knowledge on historical data matters more than enforcing physical constraints on the forecast

cs.AI ·2026-09-17 ·Etienne Lehembre, Pascal Audigane, Vincent Nguyen, Christel Vrain, Thi-Bich-Hanh Dao
similarity 0.60
Abstract

Time series forecasting has seen signicant advancements with the emergence of new deep learning models. However, forecasting time series in applications involving physical processes remains a major challenge. Despite the apparition of Physics Informed Neural Networks (PINN), recent models do not estimate unobservable intermediate physical variables, which are important for domain experts to understand the target behavior. To this end, we propose a Physics Informed Recurrent Neural Network (PIRNN) which predicts, along the target, unobservable variables on both historic data and forecast target. This approach enhances the model robustness and results interpretation using domain knowledge. Our method is easily adaptable to any physical model using several equations, each having its own set of unobservable variables, to describe it-self. As a case study, we incorporate physical equations used for groundwater levels predictions by the physical model called Gardenia. This model uses transfers equations between reservoirs, optimized with data assimilation, to simulate the evolution of groundwater levels. Evaluation includes several well known neural network models and the Gardenia model compared on twelve real world datasets. In addition, we study the impact of each component through an ablation study. Our model outperforms other models on ve out of the twelve datasets and our ablation study underlines the importance of having a physical background in our time series forecasting task. Finally, the coherence of the physical variables predicted by our neural network is assessed by a domain expert.

0.16

The Utility of Physics-Informed Machine Learning in Solar Power Production Forecasting

cs.LG ·2026-10-28 ·Peter Pavlík, Franz M. Rohrhofer, Bernhard C. Geiger
similarity 0.60
Abstract · Submitted to Solar Energy

Physics-informed machine learning (PIML) and hybrid modeling have attracted significant attention as approaches for combining physical knowledge with the flexibility of deep learning. In this work, we investigate whether these approaches deliver their commonly claimed benefits for large-scale photovoltaic (PV) power forecasting. We develop two hybrid forecasting architectures that integrate the ADR physical PV efficiency model with the TSMixer neural forecasting architecture through feature augmentation and residual learning. The proposed models are evaluated on a dataset comprising over 3 million samples from 3,713 PV installations across 33 European countries. We assess convergence speed, forecasting accuracy, transferability across geographical regions, and data efficiency. Although the physics-informed models seem to exhibit slightly faster convergence during training, they do not achieve consistent improvements in test-set accuracy, generalization, or performance under limited training data compared to the purely data-driven baseline. These findings suggest that, for modern deep forecasting architectures trained on large datasets, explicitly incorporating the ADR physical model provides limited practical benefit for day-ahead PV forecasting.

0.20