CS Paper Radar

Accelerator Choice Is Not Enough: AlphaFold2 Inference on Cloud TPUs

Lorenzo Pazienza, Ihab El Bani

cs.DC cs.LGcs.PF ·submitted 2026-09-28 10:17 UTC · v2
code/data

Abstract

AlphaFold2 is written in JAX, so the same inference code compiles and runs unchanged on CPUs, GPUs and Google Cloud TPUs. That portability makes the accelerator look like the main decision a user has to make. We show that it is not. Running one AlphaFold2 inference workload across a Colab CPU runtime, an NVIDIA T4 GPU and a dedicated eight-chip Cloud TPU v5e slice, we find a large hardware advantage for the TPU, 0.47 s per call in steady state on a single chip against 13.1 s on the T4 in the same measurement campaign, and three ways in which the software layer decides how much of it a user actually gets. The default execution path uses one chip of the eight, and at list prices the idle capacity makes the slice cost about as much per prediction as the GPU. Batching with JAX's vmap never exceeds single-query throughput, while mapping queries across chips with JAX's pmap gives eight chips 6.5-7.9x the throughput of one on a matched grid; automatic sharding leaves the per-chip footprint unchanged, consistent with replication, most plausibly because AlphaFold2 carries no sharding annotations. Our retained trace analysis of a first call at a new input shape reports about three quarters of the traced span in JAX tracing and compilation rather than execution. Reruns five weeks later reproduced neither cloud baseline, the GPU one off by roughly a factor of two, so the hardware ratio above is specific to one campaign.

Comment
22 pages, 5 figures, 4 tables. Code and data: https://github.com/lorenzopazienza/alphafold-tpu-benchmark

Closest papers

Nearest neighbours by meaning across the whole index.

GPU implementation of a resource-constrained virtual machine

cs.DC cs.GR ·2026-08-17 ·Simone Li, Vladislav Brusokas, Andrei Ghita, Shuxuan Li, Wim Vanderbauwhede
benchmark similarity 0.65
Abstract · 5 pages, 5 figures. Accepted at the 2nd International Workshop on Low Carbon Computing (LOCO 2026), Lancaster University, United Kingdom, 10…

One of the main reasons compute hardware becomes obsolete is software bloat: resource requirements increase for every iteration of a software product. Resource constrained VMs are one way to combat software bloat as they post a hard limit on the resources and so force the programmer to be frugal. In this paper we explore the deployment of one such resource constrained VM, Uxn, on GPU. We show that for competitive performance it is essential to make use of the GPU data parallelism. We present an OpenMP-style parallelism API for Uxntal, the stack-based assembly-style language for the Uxn platform. We demonstrate that exemplar code using our API can run at comparable performance even on an integrated GPU. Specifically, our evaluation results show that using this approach improves performance on the compute-intensive Stencil benchmark with 19x and frame rate on the graphics-intensive Bunnymark benchmark with 7x. In practice, all laptops and desktops and even mobile devices have a GPU and our work shows that they can be used to execute frugal workloads effectively.

0.25

Operating System Support for Accelerators as First-Class Compute Elements in Heterogeneous Systems

cs.AR cs.DCcs.OS ·2026-10-24 ·Mohammad Shahidzadeh, Lesley Shannon
similarity 0.65
Abstract · 13 pages, 12 figures

Heterogeneous systems-on-chip (SoCs) increasingly rely on domain-specific hardware accelerators (HAs) to deliver performance and energy efficiency gains beyond what general-purpose processors can provide. However, operating systems (O/S), such as Linux, assume that processors are the Compute Elements (CEs) and HAs are peripheral devices rather than specialized CEs. As a result, HA execution incurs substantial software (SW) overheads that reduce the effective benefits of hardware (HW) acceleration. This work demonstrates that significant inefficiencies arise from ``O/S peripheral device taxes'' (O/S taxes), including SW stack-accelerator communication, invocation, interrupt handling, and scheduling. We built MEERKAT, a Field-Programmable Gate Array (FPGA)-based framework for configurable multicore systems that include HAs; it allows the user to migrate Linux O/S support from SW to HW and identify, study, and quantify the impact. Here we study four major sources of O/S tax and introduce techniques to mitigate them. These include a virtual-memory-aware (VMA) communication method that enables efficient HA access to application data, a lightweight HA invocation interface, Interrupt Policy Adaptation (IPA) for dynamic polling and interrupt selection, and an HA-aware scheduler that dynamically distributes work across Central Processing Units (CPUs) and multiple HA instances. Experimental results demonstrate up to $260\times$ faster communication and $2$--$6\times$ performance improvements in wall-clock time over conventional schedulers. Furthermore, our study reveals that overall system performance depends not only on HA speed, but also on O/S overheads, resource availability, and scheduling decisions. These findings highlight the importance of treating HAs as first-class computational resources and motivate a more accelerator-centric O/S design for future heterogeneous systems.

0.15

A Measurement Study of LLM Inference Trade-offs Across Edge Continuum Hardware

cs.DC cs.AIcs.LG ·2026-09-08 ·Maysam Khatib, Moysis Symeonides, Demetris Trihinas, George Pallis, Marios D. Dikaiakos
published similarity 0.64
Abstract · Accepted for publication at WIMS 2026

Large language models (LLMs) are increasingly used as backends for intelligent web services, but serving them across the edge continuum requires balancing quality, latency, model footprint, and energy. This paper presents a controlled measurement study of self-hosted LLM inference across edge and near-edge deployment nodes: an NVIDIA Jetson AGX Orin and a near-edge server with CPU-only and GPU-enabled inference modes. We evaluate multiple open-weight LLMs and quantization variants using a fixed question-answering workload, and compare them against GPT-4o as a cloud-hosted accuracy and latency reference. Our benchmarking pipeline reports accuracy, model footprint, per-token decoding latency, prefill latency, and overall execution energy. The results show that GPU-enabled server execution provides the lowest compute-side latency, while Jetson Orin shows lower measured energy, consistent with its lower platform power under our setup. CPU-only execution is consistently dominated in latency for our workload and shows higher measured energy. We also show that parameter count and downloaded weight-file size alone do not reliably predict observed accuracy or latency. Finally, using Pareto-frontier analysis, we study how deployment decisions may change under possible streamed-token delivery overheads, highlighting that compute-side inference metrics alone can lead to suboptimal placement for latency-sensitive interactive web services.

0.26

Toward Open ISA Supercomputing: A Comparative Study of RISC-V, Arm, and x86 Architectures on HPC Workloads

cs.DC cs.ARcs.PF ·2026-10-23 ·Emanuele Venieri, Giacomo Madella, Gabriele Ceccolini, Simone Manoni, Federico Ficarelli +7 more
code/data similarity 0.64
Abstract · Preprint submitted to Future Generation Computer Systems

RISC-V is emerging as a candidate architecture for high-performance computing (HPC), but its competitiveness against established x86 and Arm processors remains difficult to assess because existing studies use different platforms, workloads, and methodologies, and rarely consider energy efficiency. Our work provides an evaluation of contemporary HPC RISC-V, Arm, and x86 processors using a common software stack and methodology. We characterize the Sophgo SG2044 and compare it with the NVIDIA Grace CPU Superchip and Intel Xeon Platinum 8480+ across four HPC benchmarks (STREAM, HPL, HPL-MxP, and HPCG) and four representative applications (iPIC3D, PLUTO, OpenFOAM, and llama$.$cpp). The version of HPL-MxP linked to OpenBLAS built and used for this work is made available as open-source software. The SG2044 reaches 8.02 GFLOP/s of FP64 performance and 7.8 GB/s of memory bandwidth per core, increasing to 294 GFLOP/s and 107 GB/s at 64 cores. L2-cache-aware process placement enables near-linear scaling up to 16 cores, beyond which memory-bandwidth saturation limits further gains. Across generations of RISC-V hardware, in the context of the Monte Cimone (MC) project, the SG2044-based MCv3 doubles both single-core performance and peak memory bandwidth relative to MCv2, while improving memory bandwidth, node-level FP64 performance, and energy efficiency by approximately 100x, 158x, and 10x, over MCv1. Against the Arm and x86 systems, the SG2044 shows 8-15x less absolute performance, reflecting its narrower vector resources and less advanced technology node, but delivers competitive scaling and energy efficiency on several workloads. Its most notable result is LLM decode, where 64-core execution provides the highest relative scaling and energy efficiency among the evaluated platforms while exceeding Intel in throughput. Our results show that RISC-V processors are closing the gap with the competition.

0.23

The Case for TPU-Accelerated Analytical Query Processing

cs.DB ·2026-10-15 ·Yeounoh Chung, Jaehyun Ha, Helena Caminal, Fatma Ozcan, Aditya K Kamath +2 more
benchmark similarity 0.64
Abstract

Large-scale analytical query processing requires computing substrates capable of immense distributed scale-out. Tensor Processing Units (TPUs) perfectly embody this extreme-scale architecture, offering massive computational density and highly scalable optical pod-level interconnects. Despite these advantages, TPUs have so far remained largely unexplored for analytical database workloads. In this paper, we present the first comprehensive case for TPU-accelerated analytical query processing by running all the TPC-H queries entirely on the TPUs. We introduce Native TPU Accelerator (NTA) for analytical query processing, which provides hardware-conscious algorithm design and optimizations in JAX/XLA. By exposing the TPU's structural mechanics, we demonstrate how dynamic, memory-bound database operations can be rewritten into deterministic JAX programs. We engineer a suite of novel execution strategies that leverage both the TPU's TensorCore and SparseCore to trade sparse, unpredictable memory accesses for dense, hardware-aligned ones. At the core of NTA, a compiler uses catalog statistics to assign guarded static capacities and a hardware-calibrated local cost model to select a TPU-native implementation for each relational operator before JIT compilation. We evaluate our system using the TPC-H benchmark. Taking full advantage of TPU slices and JAX distributed computing, we seamlessly scale our execution environment to run TPC-H benchmark up to Scale Factor 1000 (SF1000). Evaluated against a rigorous CPU ground truth (DuckDB), our native TPU accelerator achieves state-of-the-art performance, achieving a 7.0x single-device speedup over DuckDB at SF100 and a 68.6x speedup with 16 TPUs at SF1000 (1TB). The results establish TPUs not merely as dense neural compute hardware, but as a highly competitive, massively scalable substrate for the next generation of analytical query processing.

0.22

Ostinato: Fast CPU-GPU MoE Inference for Local Agents via Resident Experts in Every Forward Pass

cs.DC cs.LG ·2026-11-08 ·Junning Zhu
similarity 0.64
Abstract

Language-model agents increasingly run on workstations with a few consumer GPUs, where large mixture-of-experts (MoE) models keep part of their experts in host memory. With existing CPU-GPU engines, these agents get fast prefill or fast decode, not both: llama.cpp's expert cache skips forward passes of more than 32 tokens to keep the experts of decode cached, so an agent waits 2.1-2.8 s after each tool output, whereas its default layer placement shortens this wait but is 1.5-1.6$\times$ slower in decode. Our key insight is that a short prefill touches too many distinct experts to upload, yet sends 84% of its expert activations (routes) to a stable set of experts that fits in GPU memory. We present Ostinato, a CPU-GPU MoE inference engine that computes these experts on the GPUs in every forward pass without changing what the model computes. Short prefills split their routes, leaving fewer than one of a token's six routed experts per layer to the CPU; long prefills upload each distinct cold expert once; and each decode step runs as one fixed-shape CUDA graph per GPU. On real coding and customer-service agent sessions with DeepSeek-V4-Flash on four RTX 4090D GPUs, Ostinato is the fastest engine in both phases and finishes every session sooner than all six baselines. Against llama.cpp and KTransformers, it cuts the median wait after a tool output by 22-55% and finishes sessions 1.4-2.5$\times$ sooner.

0.19

Shards on a Shoestring: Empirical Characterization of NEAR Protocol Nightshade Sharding on Commodity Hardware

cs.DC ·2026-09-10 ·Sohini Sahukar, Om Amit Gandhi, Ioan Raicu
similarity 0.64
Abstract

NEAR Protocol's Nightshade architecture targets one million transactions per second (TPS) through horizontal sharding of both state and computation. Published benchmarks were produced on expensive Google Cloud Platform infrastructure costing approximately \$700 per hour, leaving a significant reproducibility gap for academic research. We present the first independent empirical characterization of NEAR Nightshade sharding on commodity hardware: a Chameleon Cloud bare-metal node with 48 hyperthreaded Intel Xeon cores, 128\,GB RAM, and HDD storage at 80--100\,MB/s. We systematically sweep shard count from $N{=}1$ to $N{=}24$, measuring aggregate TPS, per-shard TPS, block time, BFT finality, memory, and disk I/O. We identify three distinct bottleneck regimes: L3 cache pressure at low $N$, witness gossip pipeline saturation at mid $N$, and coherence collapse at high $N$. A key unexpected finding is that HDD write latency acts as implicit flow control for the witness gossip pipeline. Removing it via RAM-backed tmpfs causes complete chain stall at $N{=}16$, with a 29$\times$ spike in orphan witness rate at 47\% CPU utilization. Aggregate TPS peaks at $N{=}8$ (+40\% over $N{=}1$) then reverses, with per-shard TPS collapsing 23$\times$ by $N{=}24$. Our dataset provides the first commodity-hardware calibration baseline for the companion SimPy sharding simulator.

0.27

FreeToken: Efficient Edge-Native MoE Serving with Bandwidth-Adaptive Execution

cs.DC ·2026-08-17 ·Shuo Yang, Xiaoze Fan, Melissa Pan, Haocheng Xi, Zhe Wang +6 more
highly cited similarity 0.64
Abstract

Frontier open-weight models are increasingly available, but serving them still largely assumes datacenter infrastructure. We present FreeToken, an edge-native MoE serving system that treats a personal machine not as a small GPU, but as a unified, elastic inference platform. FreeToken co-designs the full serving stack, including model layout and loading, expert residency, CPU--GPU execution, agentic state reuse, and runtime memory management, around two realities of local AI: agent workloads continuously change their execution pattern, and edge hardware exposes heterogeneous resources whose balance differs from machine to machine. Rather than committing to a fixed offloading strategy, FreeToken continuously maps computation and model state onto the resources actually available. FreeToken supports more than 20 MoE models and real coding and tool-using agents across hardware ranging from an 8GB laptop GPU to a single workstation GPU. More importantly, it changes what these machines can practically serve, from a 35B model on a laptop to a 284B model on a gaming desktop and the 753B GLM-5.2 on a single workstation GPU. FreeToken turns open weights into deployable local software, making the machines users already own a practical platform for frontier-scale intelligence. We release the system at flashml.ai.

0.34