CS Paper Radar

TempoKV: Timely Staging of LLM KV Caches for Memory-Semantic Flash

Jay H. Park, Hyungjun Kim, Dong Kim

cs.DC cs.AIcs.LG ·submitted 2026-09-28 12:55 UTC · v1

Abstract

Reusable prefix key-value (KV) caches can outgrow GPU memory in large language model (LLM) serving. A memory-semantic flash hierarchy offers SSD-backed capacity with a limited fast tier, but a logical KV hit is not necessarily ready for GPU retrieval. Demand staging exposes SSD latency, whereas immediate staging can reserve fast-tier capacity long before retrieval begins. We present TempoKV, a timing-aware resource-commitment layer that separates early knowledge of reuse from the acquisition of staging resources. It records reusable-KV hits as metadata-only claims and requests commitment when the runtime-estimated time until retrieval falls to the storage-estimated time needed to make KV resident and protected against eviction. These estimates adapt to runtime progress and staging state, while commitment remains subject to available protected capacity. We implement TempoKV in vLLM and LMCache on an SSD-backed CXL memory device without changing request scheduling. Across two models and three prefix cache ratios, TempoKV reduces protected fast-tier byte-time per request by 63-91% versus immediate staging while retaining much of the serving benefit of advance staging. In a fast-tier capacity sweep, output throughput and p95 time to first token (TTFT) remain nearly unchanged as capacity decreases from 100 to 25 GiB. Compared with unmodified LMCache's Device-DAX L1 configuration, TempoKV reduces p95 TTFT by up to 48.0% and increases output throughput by up to 27.8%.

Closest papers

Nearest neighbours by meaning across the whole index.

Gandalf: Flash Shall Not Die! Increasing Flash Storage Lifetime for KV Cache Offloading in LLM Serving

cs.LG ·2026-10-22 ·Maharani A. P. Irawan, Kuntai Du, Jiayi Yao, Dongjoo Seo, Yuyang Huang +2 more
similarity 0.77
Abstract

KV caching reduces the serving cost of large language models (LLMs), but the growing KV cache footprint is increasingly exceeds GPU and host-memory capacity. Therefore, people use SSD to expand the KV cache storage capacity with high I/O bandwidth. However, in production LLM workload, such as multi-round conversation and LLM agents, the total amount of KV cache writes significantly exceeds SSD capacity, shortening SSD lifetime from years to months. To improve SSD lifetime, a natural solution is to reduce the KV cache writes by gating the KV cache writes via historical access patterns. However, that significantly lowers the KV cache hit rate (and increase the LLM serving cost) since KV caches from different attention types might have identical historical access pattern but different future access patterns. Our insight is that, to reduce KV cache writes without hurting KV cache hit rate, one need to not only consider the access pattern, but also application-level information such as the attention type of KV cache. Leveraging this observation, we propose Gandalf , the first SSD KV cache offloading system with SSD life time awareness. Gandalf prioritize the admission of full-attention KV cache into SSD over the cache generated by other types of attention, which significantly increases SSD lifetime without sacrificing cache hit rate. Our evaluation shows that Gandalf extends the SSD lifetime by 7.3X on average, while having negligible impact on cache hit rate across multiple workload traces and wide range of hardware capacity. Gandalf design can be extended to other flash-based storage, such as High Bandwidth Flash (HBF).

0.07

Range: Decoupling KV-Cache Reuse Granularity from Storage Work

cs.OS ·2026-10-15 ·Dingsen Shi, Jiahao Zhang, Liqiang Lv, Boming Huang, Yanbo Dai +5 more
similarity 0.77
Abstract · 14 pages, 10 figures, 3 tables

LLM serving reuses cached key-value (KV) state to skip prefill, and growing contexts push that state past GPU HBM and CPU DRAM onto NVMe SSDs, placing prefix restore on the critical path of time-to-first-token (TTFT). We find that on a well-configured host-issued path the SSD is not the bottleneck: restoring the same 6 GiB of KV takes 2.1 s as 192 objects but 3.0 s as 6,144 objects, and more under layerwise loading, because every layer of the storage stack - lookup, allocation, I/O submission, GPU delivery, store, index - charges per logical object while the bytes stay the same. This cost grows with the KV footprint: longer contexts, deeper models under layerwise loading, and tensor parallelism each multiply the object count. Prior systems move this per-object work from the CPU to the GPU; the work remains per object. This paper presents Range, a KV-cache storage engine for vLLM and LMCache built on one principle: every cost on the storage path scales with bytes or physical batches, never with logical objects. Range tickets replace per-key lookup and ownership with token metadata and physical leases; byte stripes make the on-media layout independent of reuse granularity; completion-owned GPU transfer banks batch delivery and extraction and release each layer to attention as it lands. Range keeps the kernel cuFile path and changes four lines of vLLM. On a fixed 6 GiB restore, Range's median TTFT stays at 1.79-1.80 s across a 32x range of object counts and under layerwise delivery, within 70 ms of the prefix already being resident in GPU memory, while tuned in-process LMCache rises from 2.12 s to 3.01 s. Range improves on the fastest multiprocess DRAM-bounced path by 0.44 s at coarse granularity while moving no payload through host memory, and holds layerwise reuse at the cost of coarse-grained reuse, where the best stock path takes 2.24 s.

0.21

TripleKV: Predict, Prefetch, Protect -- KV Cache Management for AI Agents

cs.DC cs.ARcs.OS ·2026-11-18 ·Shashwat Jaiswal, Chloe Alverti, Mengmei Ye, Chen Wang, Hubertus Franke +3 more
similarity 0.76
Abstract · 13 pages, 23 figures

LLM agents alternate between inference and tool execution, repeatedly reusing their growing context across calls. Under high concurrency, their combined key-value (KV) cache working set can reach hundreds of GiB, far exceeding GPU memory capacity. As idle KV cache blocks are evicted to slower storage tiers, returning agents incur expensive retrievals that stall inference. To address this problem, we present \emph{TripleKV}, a three-tier KV cache management system that hides the delays of these retrievals. %exploits tool execution to hide these delays. In agentic workloads, the KV blocks needed by the next inference request are known in advance; only the time of their reuse is uncertain. TripleKV uses a tool-aware latency predictor to estimate when each tool call will complete and prefetches the required KV blocks from SSD into host DRAM ahead of time. Unlike GPU prefetching, this avoids reserving scarce GPU memory and interfering with concurrent inference requests. To further improve DRAM utilization, TripleKV eliminates duplication of GPU-resident blocks in DRAM, and introduces a victim-cache mechanism that refills blocks from SSD upon their eviction from GPU memory. Across data, web, and coding agents, TripleKV reduces the fraction of requests requiring critical-path SSD reads from 45--76\% to under 10\%. It also reduces P95 time to first token (TTFT) by up to 49\% compared with vLLM extended with DRAM and SSD KV-cache tiers, and achieves 1.5-7$\times$ lower P95 TTFT than recent agent-aware systems.

0.21

SARIA: Persistence-Aware KV Caching with Coordinated DRAM--SSD Reload for LLM Agents

cs.OS ·2026-10-22 ·Hui Li, Qihui Zhou, Xiao Yan, Shumeng Zhang, Zijie Dai +5 more
similarity 0.76
Abstract · 12 pages, 16 figures

Multi-turn LLM agents usually reuse long context prefixes, making key value (KV) caching crucial for reducing prefill latency. SSDs provide a low-cost extension to limited DRAM capacity but introduce two key challenges. Eagerly persisting all KV cache blocks incurs substantial write traffic and rapidly consumes finite SSD endurance. Meanwhile, the small number of SSDs provisioned in typical GPU servers limits aggregate reload bandwidth, making SSD-resident KV cache much slower to retrieve than that in DRAM and inflating prefill latency. We present \textsc{Saria} (Selective Admission and Reload for Inference Acceleration), a KV caching system that jointly manages DRAM and SSD by exploiting the session-level temporal locality of LLM agents to reduce SSD writes and accelerate cache reload. On the write path, \textsc{Saria} uses eviction and reuse history to selectively persist KV cache blocks that exhibit reuse opportunities beyond their DRAM residency, avoiding unnecessary writes for KV cache already hosted in DRAM. On the read path, \textsc{Saria} promotes selected SSD-hit KV cache blocks from GPU memory into DRAM after prefill, allowing subsequent reuse within the same session to reduce SSD read traffic while limiting DRAM contention. A transfer coordinator paces DRAM reads while SSD transfers are active, allowing both paths to make progress and efficiently share GPU ingress bandwidth. We implement \textsc{Saria} on LMCache MP and evaluate it using workloads from TraceLab and WEKA, covering both full-attention and hybrid-attention models. The results show that \textsc{Saria} reduces SSD writes by 57.1--58.9\% compared with popular full duplicate caching and the mean time to first token (TTFT) by 42.3--79.7\% over DRAM-only caching.

0.08

The Storage View Of KV Cache: Characterizing Cache Behavior Across LLM Workloads

cs.OS ·2026-11-06 ·Talia Q. Chen, Daniel Waddington, Narangerelt Batsoyol, Vijay Chidambaram
similarity 0.76
Abstract

Modern LLM serving increasingly extends KV caches beyond GPU memory into host DRAM, SSDs, and remote storage, yet these stores remain largely governed by workload-agnostic policies such as LRU and fixed TTLs. We ask what execution context is needed by storage to make retention, reclamation, and placement decisions across heterogeneous workloads. We characterize KV-cache reuse, lifetime, and footprint at block granularity across 11 production and public traces spanning chat, API serving, RAG, coding agents, tool-using agents, and multi-lineage workflows. We examine reuse sources, recurrence timing and frequency, useful lifetimes, and storage consumption. Across workloads, KV state takes two recurring forms. Single-session state is reused within one execution: its footprint grows as sessions deepen and accumulates across concurrent sessions; it can remain useful through long idle periods but loses value at session completion. Multi-session state recurs across sessions of the same workload, outlives individual sessions, and spans hot prefixes and a large infrequent tail. While prior systems often exploit application-, agent-, or workflow-specific knowledge, our results suggest that three generic signals (a workload identifier, a session identifier, and session completion) expose much of the structure needed for KV-storage management. Trace-driven comparisons show that workload-specific recurrence estimates retain up to 22% more within-session hits and reduce dead state by up to 40%; a session completion signal eliminates the fundamental idle-time reclamation tradeoff for single-session state; and session-aware reuse classification identifies shared state 4-700x more selectively than request-level access counts. These results motivate a small cross-layer interface for workload-aware KV storage without application-specific semantics.

0.14

Bridging LLM Serving and CXL-SSDs with Chunk-Aware KV Cache Management

cs.AR cs.AIcs.ET ·2026-09-20 ·Hyunsun Chung, Taewan Noh, Minji Kim, Joo-Young Hwang, Hong-Yeon Kim +1 more
similarity 0.75
Abstract · 12 pages, 17 figures

NAND-backed storage offers the capacity needed to scale LLM prefix caching, but its block I/O path incurs CPU cache contention and host-DRAM staging in addition to NAND latency. Our characterization shows that these interface costs persist even with DRAM as the storage medium, motivating CXL-SSDs for byte-addressable access to NAND-backed capacity. Surprisingly, however, a stock CXL-SSD remains about 3$\times$ slower than local DRAM and no faster than an NVMe SSD, while generic prefetching provides little benefit. We present LM-CXD, a CXL-SSD specialized for LLM prefix caching. LM-CXD bridges the semantic gap between the serving engine, which knows which KV chunks will be consumed, and the device, which controls their placement and movement. It makes KV chunks device-visible I/O units, exposes NAND-to-DRAM progress to the serving engine, and uses device DRAM as a GPU-accessible buffer. LM-CXD further coordinates request scheduling with windowed prefetching and pipelines layerwise KV movement with GPU computation to hide NAND latency under limited device DRAM. Across five LLM models, LM-CXD reduces average TTFT over a stock CXL-SSD by up to 2.6$\times$ with compute asynchronous prefetching and 4.03$\times$ with layerwise prefetching, achieving TTFT within 1.5$\times$ of local DRAM on average.

0.21

LeanSparse: Memory-Efficient Serving for Native Sparse-Attention LLMs

cs.DC ·2026-11-03 ·Zaifeng Pan, Chris Wu, Xinwei Qiang, Zhengding Hu, Zhongkai Yu +1 more
similarity 0.74
Abstract

Sparse attention limits the history read by each query, but serving long contexts still requires substantial GPU memory. Existing KV offloading systems retain the full history of indexer keys on GPU, limiting decode concurrency. Prefill's temporary memory demand can further delay admission even when enough memory remains for the same request's subsequent decode. We present LeanSparse, a serving system that reduces both decode's persistent memory use and prefill's temporary memory demand. Our design exploits two observations: prefill consumes historical data one layer at a time, and decode can identify promising candidates before comparing their original indexer scores. During prefill, LeanSparse streams layer histories through two reusable GPU buffers, overlapping next-layer loading with ongoing model computation. During decode, coarse-to-fine indexing searches compact representations and retrieves original indexer keys only for candidate refinement. Separate indexer key and KV caches reuse data across generation steps. We implement LeanSparse in SGLang and evaluate it on DeepSeek-V4-Flash. At 950K context length, LeanSparse supports 2.95$\times$ as many concurrent requests and achieves 2.14$\times$ decode throughput over HiSparse. On multi-turn Open-SWE traces, it reduces median time to first token from 21.6 to 0.6s and median session completion time by 17.7% relative to ECHO.

0.16

Does Execution Require Target KV Fidelity? A Mixed-Fidelity KV Runtime for LLM Serving

cs.LG ·2026-09-27 ·Jiantong Jiang, Yue Yang, Peiyu Yang, Feng Liu
similarity 0.74
Abstract

Large language model (LLM) serving is increasingly constrained by the GPU memory consumed by key-value (KV) caches. Existing compression, eviction, and offloading techniques alleviate this pressure, but serving runtimes typically treat only the configured target KV representation as execution-ready. Under memory pressure, this target-only contract can turn KV shortage into request stalls and preemptions. We present ElasticKV, a mixed-fidelity KV runtime built on the observation that target fidelity need not gate execution. ElasticKV introduces a compact intermediate KV state, making fidelity a runtime-managed execution property. To realize this state in a paged serving runtime, ElasticKV combines (i) a pair-structured layout that turns fidelity reduction into reusable GPU capacity, (ii) a dual-mode attention backend that directly consumes the compact state while preserving the native target-only path, and (iii) pressure-aware fidelity management that adapts KV fidelity to memory pressure. Our extensive evaluation across diverse workloads, model families and scales, and GPU platforms demonstrates the effectiveness and generality of ElasticKV. Under high concurrency, ElasticKV achieves 3.8-4.0$\times$ lower time-to-first-token (TTFT) and 9.1$\times$ lower P90 TTFT than vLLM while preserving generation quality.

0.36