CS Paper Radar

Gandalf: Flash Shall Not Die! Increasing Flash Storage Lifetime for KV Cache Offloading in LLM Serving

Maharani A. P. Irawan, Kuntai Du, Jiayi Yao, Dongjoo Seo, Yuyang Huang, Haryadi S. Gunawi, Junchen Jiang

cs.LG ·submitted 2026-10-22 06:10 UTC · v1

Abstract

KV caching reduces the serving cost of large language models (LLMs), but the growing KV cache footprint is increasingly exceeds GPU and host-memory capacity. Therefore, people use SSD to expand the KV cache storage capacity with high I/O bandwidth. However, in production LLM workload, such as multi-round conversation and LLM agents, the total amount of KV cache writes significantly exceeds SSD capacity, shortening SSD lifetime from years to months. To improve SSD lifetime, a natural solution is to reduce the KV cache writes by gating the KV cache writes via historical access patterns. However, that significantly lowers the KV cache hit rate (and increase the LLM serving cost) since KV caches from different attention types might have identical historical access pattern but different future access patterns. Our insight is that, to reduce KV cache writes without hurting KV cache hit rate, one need to not only consider the access pattern, but also application-level information such as the attention type of KV cache. Leveraging this observation, we propose Gandalf , the first SSD KV cache offloading system with SSD life time awareness. Gandalf prioritize the admission of full-attention KV cache into SSD over the cache generated by other types of attention, which significantly increases SSD lifetime without sacrificing cache hit rate. Our evaluation shows that Gandalf extends the SSD lifetime by 7.3X on average, while having negligible impact on cache hit rate across multiple workload traces and wide range of hardware capacity. Gandalf design can be extended to other flash-based storage, such as High Bandwidth Flash (HBF).

Closest papers

Nearest neighbours by meaning across the whole index.

Enabling High-Bandwidth Flash for Generative Recommendation Serving with Write-Aware KV Cache Policy

cs.AR ·2026-09-07 ·Danni Peng, Kai Wu, Tianyu Zuo, Pengfei Xia, Hui Zang
similarity 0.78
Abstract · 5 pages, 7 figures

Generative recommendation (GR) systems increasingly leverage user-level KV cache reuse to avoid recomputing long user histories. However, the growing KV cache capacity and bandwidth requirements introduce new challenges for memory system. High-Bandwidth Flash (HBF) provides a promising solution by offering substantially higher capacity than HBM while approaching HBM-class read bandwidth, enabling larger scale KV cache retention and improved serving throughput. Yet conventional Least-Recently-Used (LRU) KV cache management tightly couples KV cache writes with cache misses, generating excessive write traffic that rapidly exhausts flash endurance. In this work, we evaluate a write-aware KV cache policy based on admission-controlled LRU-K for HBF-based GR serving. By filtering low-reuse users before cache admission, LRU-K decouples KV cache writes from misses and significantly reduces unnecessary writes. We develop an analytical model to characterize GR serving performance, KV cache write traffic, and HBF lifetime, and evaluate performance across diverse memory systems and GR workloads. Our results show that HBF-based systems achieve 3.8 to 4.7 times higher throughput than HBM-only systems. Moreover, LRU-K extends HBF lifetime from about one year under conventional LRU to over six years with a moderate K=10, while maintaining comparable or even slightly improved throughput. These results highlight the importance of write aware KV cache policy for sustainable HBF-based GR serving.

0.47

TempoKV: Timely Staging of LLM KV Caches for Memory-Semantic Flash

cs.DC cs.AIcs.LG ·2026-09-28 ·Jay H. Park, Hyungjun Kim, Dong Kim
similarity 0.77
Abstract

Reusable prefix key-value (KV) caches can outgrow GPU memory in large language model (LLM) serving. A memory-semantic flash hierarchy offers SSD-backed capacity with a limited fast tier, but a logical KV hit is not necessarily ready for GPU retrieval. Demand staging exposes SSD latency, whereas immediate staging can reserve fast-tier capacity long before retrieval begins. We present TempoKV, a timing-aware resource-commitment layer that separates early knowledge of reuse from the acquisition of staging resources. It records reusable-KV hits as metadata-only claims and requests commitment when the runtime-estimated time until retrieval falls to the storage-estimated time needed to make KV resident and protected against eviction. These estimates adapt to runtime progress and staging state, while commitment remains subject to available protected capacity. We implement TempoKV in vLLM and LMCache on an SSD-backed CXL memory device without changing request scheduling. Across two models and three prefix cache ratios, TempoKV reduces protected fast-tier byte-time per request by 63-91% versus immediate staging while retaining much of the serving benefit of advance staging. In a fast-tier capacity sweep, output throughput and p95 time to first token (TTFT) remain nearly unchanged as capacity decreases from 100 to 25 GiB. Compared with unmodified LMCache's Device-DAX L1 configuration, TempoKV reduces p95 TTFT by up to 48.0% and increases output throughput by up to 27.8%.

0.12

SARIA: Persistence-Aware KV Caching with Coordinated DRAM--SSD Reload for LLM Agents

cs.OS ·2026-10-22 ·Hui Li, Qihui Zhou, Xiao Yan, Shumeng Zhang, Zijie Dai +5 more
similarity 0.76
Abstract · 12 pages, 16 figures

Multi-turn LLM agents usually reuse long context prefixes, making key value (KV) caching crucial for reducing prefill latency. SSDs provide a low-cost extension to limited DRAM capacity but introduce two key challenges. Eagerly persisting all KV cache blocks incurs substantial write traffic and rapidly consumes finite SSD endurance. Meanwhile, the small number of SSDs provisioned in typical GPU servers limits aggregate reload bandwidth, making SSD-resident KV cache much slower to retrieve than that in DRAM and inflating prefill latency. We present \textsc{Saria} (Selective Admission and Reload for Inference Acceleration), a KV caching system that jointly manages DRAM and SSD by exploiting the session-level temporal locality of LLM agents to reduce SSD writes and accelerate cache reload. On the write path, \textsc{Saria} uses eviction and reuse history to selectively persist KV cache blocks that exhibit reuse opportunities beyond their DRAM residency, avoiding unnecessary writes for KV cache already hosted in DRAM. On the read path, \textsc{Saria} promotes selected SSD-hit KV cache blocks from GPU memory into DRAM after prefill, allowing subsequent reuse within the same session to reduce SSD read traffic while limiting DRAM contention. A transfer coordinator paces DRAM reads while SSD transfers are active, allowing both paths to make progress and efficiently share GPU ingress bandwidth. We implement \textsc{Saria} on LMCache MP and evaluate it using workloads from TraceLab and WEKA, covering both full-attention and hybrid-attention models. The results show that \textsc{Saria} reduces SSD writes by 57.1--58.9\% compared with popular full duplicate caching and the mean time to first token (TTFT) by 42.3--79.7\% over DRAM-only caching.

0.08

The Storage View Of KV Cache: Characterizing Cache Behavior Across LLM Workloads

cs.OS ·2026-11-06 ·Talia Q. Chen, Daniel Waddington, Narangerelt Batsoyol, Vijay Chidambaram
similarity 0.75
Abstract

Modern LLM serving increasingly extends KV caches beyond GPU memory into host DRAM, SSDs, and remote storage, yet these stores remain largely governed by workload-agnostic policies such as LRU and fixed TTLs. We ask what execution context is needed by storage to make retention, reclamation, and placement decisions across heterogeneous workloads. We characterize KV-cache reuse, lifetime, and footprint at block granularity across 11 production and public traces spanning chat, API serving, RAG, coding agents, tool-using agents, and multi-lineage workflows. We examine reuse sources, recurrence timing and frequency, useful lifetimes, and storage consumption. Across workloads, KV state takes two recurring forms. Single-session state is reused within one execution: its footprint grows as sessions deepen and accumulates across concurrent sessions; it can remain useful through long idle periods but loses value at session completion. Multi-session state recurs across sessions of the same workload, outlives individual sessions, and spans hot prefixes and a large infrequent tail. While prior systems often exploit application-, agent-, or workflow-specific knowledge, our results suggest that three generic signals (a workload identifier, a session identifier, and session completion) expose much of the structure needed for KV-storage management. Trace-driven comparisons show that workload-specific recurrence estimates retain up to 22% more within-session hits and reduce dead state by up to 40%; a session completion signal eliminates the fundamental idle-time reclamation tradeoff for single-session state; and session-aware reuse classification identifies shared state 4-700x more selectively than request-level access counts. These results motivate a small cross-layer interface for workload-aware KV storage without application-specific semantics.

0.14

Characterizing Predictability-Latency Trade-offs of KV-Cache SSD Offloading in LMCache for LLM Serving Systems

cs.OS ·2026-10-15 ·Ying He, Dingsen Shi, Yanbo Dai, Donger Chen, Harry Fu +3 more
published similarity 0.74
Abstract · 6 pages, 3 figures, 3 tables

KV-cache offload is widely used to stretch GPU memory for LLM serving, but its storage behavior has not been characterized at the block-device level. In this paper, we study LMCache through realworld multi-session workloads that span same/different context x same/different prompt, using over 100 stateless requests per workload. Our comparison is observational rather than factorial: it contrasts two realizable deployment snapshots -- LMCache 0.3.0 with buffered I/O and the kernel page cache, and LMCache 0.3.16 with prefix-aware deduplication and O_DIRECT. Key findings define the paper. First, the legacy stack appears almost read-free at the SSD layer in all four workloads, but a flush_ram experiment shows that this is conditional on page-cache warmth: once the cache is evicted, the same path issues about 1 GB of sequential reads in 683 ms. Second, deduplication delivers a dramatic write reduction only for the exact-repeat workload: one set collapses from 1.62 GB to 11.75 MB of writes, while the other three sets remain in the 2-5 GB range. Third, O_DIRECT converts a hidden and bimodal read cost into an explicit and stable one: on one set, warm TTFT rises from 27 ms to 93 ms because each of the 99 warm requests re-reads the same ~12 MB partial chunk from SSD. The main conclusion is therefore not "newer is better," but a system trade-off: predictability versus average-case latency.

0.18

Lachesis: Lifetime-Aware KV Cache Placement for Agent Serving across HBM and High-Bandwidth Flash

cs.AR cs.DC ·2026-10-06 ·Jaehoon Yang, Jeongmin Lee, Haneul Park, Seung Yul Lee, Nam Sung Kim +1 more
similarity 0.74
Abstract

Large language model (LLM) serving is increasingly dominated by agentic workloads, in which agents and their sub-agents accumulate context as KV cache across many requests, consuming substantial memory. High-bandwidth flash (HBF) is a promising solution, providing an order of magnitude greater capacity at HBM-class read bandwidth, but its finite write endurance is the key limiting factor. Our key insight is that KV cache should be placed across HBM and HBF by its lifetime. Placing shorter-lived data in HBM lets HBM absorb more of an agent run's writes and sends less of them to HBF. As the lifetime of KV cache in agentic serving is dictated by the harness, the program that orchestrates the agents, we analyze its behavior and identify three axes along which lifetime diverges, temporal, structural, and inter-worker. Guided by these observations, we present Lachesis, a lifetime-aware KV cache placement layer between the agent harness and the serving engine. At write time, it places each segment in HBM or HBF according to its lifetime, and frees its blocks once the segment is no longer read. In trace-driven simulation, Lachesis extends HBF lifetime by 1.19-3.13x over HBM-first placement, reaching 3.3-12.2 device-years. Even under continuous 24x7 operation at the full load a tight SLO admits, HBF outlasts its five-year warranty on the multi-agent trace.

0.40

Characterizing High Bandwidth Flash for LLM Serving

cs.LG cs.ARcs.DC ·2026-09-30 ·Zack Yu, Chloe Wong, Coleman Hooper, Minjae Lee, Wonjun Kang +5 more
similarity 0.74
Abstract

Large language model (LLM) serving requires substantial memory to store model weights and KV caches. As models grow larger and contexts become longer, memory capacity and bandwidth increasingly become bottlenecks for serving performance. Agentic workloads compound this pressure through repeated interactions over growing contexts, making it increasingly important to retain KV state for reuse. High-bandwidth flash (HBF) offers a way to expand accelerator memory capacity for large language model (LLM) serving, but its access costs and limited write endurance complicate its use. We evaluate HBF for high-throughput agentic serving across system design and scheduling choices to understand when additional capacity improves serving performance and energy efficiency. We introduce an HBM-HBF-host hierarchical storage system and buffered cache-aware scheduling, and use trace-driven simulations to analyze their effects on performance, energy consumption, and HBF write lifetime. Across the evaluated workloads, the fastest HBF-augmented systems reduce completion time by 36.1-87.7% relative to HBM-only systems. Modeled energy savings reach 59.1%, with benefits depending on the workload and weight placement. Buffered cache-aware scheduling extends estimated HBF write lifetime from 1.21 to 14.82 years in the evaluated configuration. These results demonstrate the importance of coordinating data placement and scheduling to improve serving efficiency while sustaining a practical HBF write lifetime.

0.26

Bridging LLM Serving and CXL-SSDs with Chunk-Aware KV Cache Management

cs.AR cs.AIcs.ET ·2026-09-20 ·Hyunsun Chung, Taewan Noh, Minji Kim, Joo-Young Hwang, Hong-Yeon Kim +1 more
similarity 0.73
Abstract · 12 pages, 17 figures

NAND-backed storage offers the capacity needed to scale LLM prefix caching, but its block I/O path incurs CPU cache contention and host-DRAM staging in addition to NAND latency. Our characterization shows that these interface costs persist even with DRAM as the storage medium, motivating CXL-SSDs for byte-addressable access to NAND-backed capacity. Surprisingly, however, a stock CXL-SSD remains about 3$\times$ slower than local DRAM and no faster than an NVMe SSD, while generic prefetching provides little benefit. We present LM-CXD, a CXL-SSD specialized for LLM prefix caching. LM-CXD bridges the semantic gap between the serving engine, which knows which KV chunks will be consumed, and the device, which controls their placement and movement. It makes KV chunks device-visible I/O units, exposes NAND-to-DRAM progress to the serving engine, and uses device DRAM as a GPU-accessible buffer. LM-CXD further coordinates request scheduling with windowed prefetching and pipelines layerwise KV movement with GPU computation to hide NAND latency under limited device DRAM. Across five LLM models, LM-CXD reduces average TTFT over a stock CXL-SSD by up to 2.6$\times$ with compute asynchronous prefetching and 4.03$\times$ with layerwise prefetching, achieving TTFT within 1.5$\times$ of local DRAM on average.

0.21