CS Paper Radar

Inverse Optimal Feedback Stabilization of 3D Nonholonomic Vehicles in Spherical Coordinates

Kwang Hak Kim, Mamadou Diagne, Miroslav Krstic

eess.SY math.OC ·submitted 2026-09-28 20:10 UTC · v1

Abstract

Inverse optimal control provides optimality and robustness guarantees without solving the Hamilton--Jacobi--Bellman (HJB) equation, but its application to 3D nonholonomic vehicles has been precluded by the absence of strict control Lyapunov functions (CLFs). Recently, such strict CLFs were constructed for the 3D nonholonomic vehicle in spherical coordinates, which circumvent Brockett's obstruction, on the largest possible domain. Building on this construction, this paper develops a general inverse optimal stabilizing controller for the 3D nonholonomic vehicle actuated by surge velocity, pitch rate, and yaw rate. The design is a damping $L_gV$ feedback that minimizes a meaningful cost and inherits stability margins. Its flexibility is demonstrated through two choices of penalty function: a quadratic running cost on the state, recovering a near-classical optimal control formulation, and stabilization under user-defined input constraints. Numerical simulations illustrate stabilization performance, control-effort tradeoffs, and the effect of input constraints.

Comment
Submitted to the 2027 American Control Conference (ACC)

Closest papers

Nearest neighbours by meaning across the whole index.

Global Exponential Stabilization of a 3D Nonholonomic Vehicle in Spherical Coordinates

eess.SY math.OC ·2026-09-21 ·Kwang Hak Kim, Velimir Todorovski, Miroslav Krstic
published similarity 0.72
Abstract · Accepted to the 2026 IEEE Conference on Decision and Control (CDC)

Many spatial (3D) vehicles, including AUVs and fixed-wing aircraft, are effectively nonholonomic and subject to limited actuation, such that continuous time-invariant stabilization is fundamentally obstructed by Brockett's necessary condition. To overcome this obstruction, we exploit the geometric singularity of spherical coordinates to design a backstepping continuous, time-invariant feedback law that exponentially stabilizes a 3D nonholonomic vehicle actuated solely by forward surge velocity, pitch rate, and yaw rate. The resulting closed-loop region of attraction excludes only the coordinate singularity, codimension-two, measure-zero set of initial conditions in which the vehicle lies on the line through the target orthogonal to the target plane, thereby covering the largest possible domain. We further construct a strict control Lyapunov function to prove global exponential stability of the origin on this domain with a user-specified decay rate, while simultaneously preventing the system from approaching the singular set. Finally, we show that the closed-loop system is exponentially attractive to the origin in Cartesian coordinates. Numerical simulation examples in both spherical and Cartesian coordinates illustrate the effectiveness of the control law.

0.51

Scaling-Based Reciprocal Control Barrier Functions for Nonholonomic Mobile Robots

eess.SY ·2026-08-23 ·Tianyu Han, Bo Wang
published similarity 0.58
Abstract · The paper has been accepted for publication in the ASME Letters in Dynamic Systems and Control

This paper studies the construction of control barrier functions (CBFs) for force-controlled nonholonomic mobile robots subject to relative-degree-two safety constraints arising from position-level obstacle avoidance. A scaling-based reciprocal barrier construction is proposed, in which a positive motion-dependent scaling factor is placed in the numerator of a reciprocal barrier associated with the original physical safety function. The resulting barrier is defined exactly on the interior of the physical safe set and becomes singular on its boundary, thereby preserving the certified interior domain of the original safety constraint while recovering first-order control authority. For a force-controlled nonholonomic robot model, sufficient conditions are derived under which the proposed construction defines a reciprocal CBF, and the interior of the physical safe set is forward invariant under controllers satisfying the induced reciprocal-CBF condition. A scalar strict-feedback system is further used to provide a structural interpretation of the underlying higher-relative-degree cascade under explicit structural assumptions. Numerical simulations demonstrate the induced safe-set geometry and its integration with an optimization-based control framework for obstacle avoidance.

0.52

BubbleCBF: Constructive Safety for Second-Order Systems and Application to Autonomous Robot Navigation in Unknown Environments

cs.RO ·2026-10-14 ·Mani Amani, Mohammed Alyaseen, Zhirui Dai, Ki Myung Brian Lee, Nikolay Atanasov +1 more
theory similarity 0.57
Abstract

Satisfying safety constraints for systems with second-order dynamics is challenging because a position constraint may require infeasible deceleration. Higher-order control barrier functions (CBFs) provide an approach for expressing safety conditions for such systems but feasibility depends on the system dynamics and available control authority. We develop a constructive approach for designing feasible safety constraints for second-order control-affine systems. Starting from a signed distance function (SDF), we construct collision-free spheres, i.e., bubbles, in position space, and use their quadratic geometry and overlap to construct a velocity-dependent safety constraint. The associated safe set is represented as a union of intersections and enforced through a quadratic-program safety filter. Under mild assumptions on the dynamics, bubble overlap, and design parameters, we prove that the quadratic-program-based controller is well defined, continuous in the system state, and renders the set forward invariant. We also derive sufficient conditions for feasibility under bounded inputs. We demonstrate that our BubbleCBF, applied to a differential-drive robot, achieves safe autonomous navigation in unknown environments. Videos and results are available at: https://existentialrobotics.org/bubblecbf/.

0.17

Safe Receding-Horizon Control of Fixed-Wing Aircraft Using Constrained Approximate Dynamic Programming

eess.SY ·2026-10-05 ·Felipe Arenas-Uribe, Ricardo Gutierrez, Jesse B. Hoagg
similarity 0.56
Abstract

We present a receding-horizon optimal control for fixed-wing aircraft subject to state constraints. These constraints include operational constraints such as altitude, geofencing, and obstacle avoidance, as well as bounds on flight-path angle, roll angle, and airspeed. The state constraints are composed into a single soft-minimum control barrier function (CBF). We use this composite CBF in a constrained-approximate dynamic program to obtain a sequence of analytic closed-form control functions that approximately minimize a quadratic finite-horizon integral cost subject to the CBF constraint. The resulting receding-horizon control is non-myopic in the sense that it approximately optimizes the integral cost while satisfying the state constraint at all times along the entire prediction horizon. We demonstrate constraint satisfaction and performance in simulations of a fixed-wing aircraft navigating an obstacle-filled airspace under wind uncertainty. We also compare this receding-horizon control with 2 other methods.

0.14

SC3BF: Shifted Collision Cone Control Barrier Function for Dynamic Obstacle Avoidance

cs.RO cs.MAeess.SY ·2026-10-06 ·Amin Kashiri, Yasin Yazıcıoğlu
theory similarity 0.55
Abstract · Submitted to the 2027 American Control Conference (ACC)

The collision cone used by velocity-space control barrier functions is conservative: it rejects every relative velocity aimed into an obstacle, however slow. We propose the \emph{shifted collision-cone CBF} (SC3BF), which adds a state-dependent \emph{allowance} to the cone condition, so the robot may approach the obstacle at a rate that grows with distance and with its own speed. SC3BF is enforced by an ordinary quadratic program, and its safe set is forward invariant under bounded inputs without a minimum forward speed or a clearance margin. We prove that a nonzero allowance preserving safety always exists, and derive one in closed form. Against three velocity-space baselines on a kinematic bicycle among up to $100$ moving obstacles, SC3BF reaches the goal more often and modifies the nominal input less than half as much.

0.40

Balanced Active Subspaces for Optimal Control via Trajectory Optimization

cs.LG math.OCmath.DSmath.NA ·2026-10-26 ·Emmanuel S. Ameh, Samuel E. Otto
similarity 0.55
Abstract

The curse of dimensionality associated with solving the Hamilton-Jacobi-Bellman equation for the value function remains a key obstacle for real-time optimal feedback control of high-dimensional nonlinear dynamical systems. This is especially severe in aerospace applications such as relaminarizing unsteady turbulent flows and recovering from aerodynamic stall where nonlinear dynamics play a significant role. We introduce Balanced Active Subspaces for Optimal Control (BASOC), a model reduction framework which seeks to find directions in state space along which the value function is most sensitive, and the distribution of states exhibits maximum variance along optimal trajectories. BASOC leverages trajectory optimization and the Pontryagin minimum principle to obtain state and co-state (value function gradient) data along locally optimal trajectories for constructing state and gradient covariance matrices. Balancing these matrices provides an oblique projection for approximating the value function, which can also be used to construct reduced-order models and surrogate feedback control laws. We show that for linear-quadratic optimal control problems, BASOC becomes equivalent to a snapshot method for initial condition balancing of the optimally controlled closed-loop realization. The framework is demonstrated on a nonlinear three-dimensional system where POD and balanced truncation are known to perform poorly, and on the nonlinear complex Ginzburg-Landau equation to demonstrate feasibility for larger-scale systems.

0.31

Profile-Anchored Control: Velocity Shaping with Exact Disturbance Rejection and Transient-Free Replanning

eess.SY math.OC ·2026-11-19 ·Christian Fredrik Sætre, Morten Dinhoff Pedersen
theory similarity 0.55
Abstract

In many motion-control problems, how a target is approached matters as much as whether it is reached: speed and deceleration must stay within actuator, safety or comfort limits despite unknown loads and disturbances. Position-dependent velocity profiles provide a natural way to describe such requirements. We show that the square of such a profile can be used both to plan the motion and to construct the controller that executes it. Our main result, profile-anchored control with exact rejection (PACER), recovers the nominal motion after a finite time under an unknown gain and load, and then allows the profile to be replaced mid-motion without a transient. It combines a static law for scalar second-order systems with a dynamic law for first-order ones, used for disturbance rejection. The static law guarantees uniform global asymptotic stability under an unknown input gain with a known lower bound, and finite-time stability under local homogeneity, while the first-order law gives analogous guarantees under disturbances of bounded rate and provides the exact rejection in PACER. Replanning of a profile under speed, acceleration and jerk limits can be formulated as a convex program. The approach is illustrated on a simulated elevator.

0.25

Safe Position and Attitude Control for Landing on Small Celestial Bodies with Gravitational Uncertainty

eess.SY math.OC ·2026-10-03 ·Felipe Arenas-Uribe, T. Michael Seigler, Jesse B. Hoagg
theory similarity 0.55
Abstract

Landing on small celestial bodies is challenging because the spacecraft must satisfy safety and actuator constraints despite gravitational forces that are difficult to model accurately. This article presents an optimal control for safe landing with gravitational uncertainty and strict actuator limits. The approach addresses spacecraft pose control with attitude represented on SO(3), where there are actuator constraints and state constraints on position, attitude, velocity, and angular velocity. The approach combines several key techniques. First, the gravitational force uncertainty is estimated using an extended high-gain observer, and we present a new dynamic upper bound on the estimation error. This gravitational estimate and dynamic bound are then used to compute optimal control forces and torques that satisfy state and actuator constraints while tracking a landing trajectory. Optimal forces and torques are obtained from the closed-form solution to a quadratic program that has a single control barrier function constraint constructed by composing multiple control barrier functions that are designed to enforce each state and actuator constraint. Finally, an optimal allocation maps control forces and torques to actuator commands that satisfy actuator constraints. The method is demonstrated in simulation using 2 vehicle configurations with severe gravitational uncertainty.

0.21