CS Paper Radar

Scaling-Based Reciprocal Control Barrier Functions for Nonholonomic Mobile Robots

Tianyu Han, Bo Wang

eess.SY ·submitted 2026-08-23 22:37 UTC · v1
published

Abstract

This paper studies the construction of control barrier functions (CBFs) for force-controlled nonholonomic mobile robots subject to relative-degree-two safety constraints arising from position-level obstacle avoidance. A scaling-based reciprocal barrier construction is proposed, in which a positive motion-dependent scaling factor is placed in the numerator of a reciprocal barrier associated with the original physical safety function. The resulting barrier is defined exactly on the interior of the physical safe set and becomes singular on its boundary, thereby preserving the certified interior domain of the original safety constraint while recovering first-order control authority. For a force-controlled nonholonomic robot model, sufficient conditions are derived under which the proposed construction defines a reciprocal CBF, and the interior of the physical safe set is forward invariant under controllers satisfying the induced reciprocal-CBF condition. A scalar strict-feedback system is further used to provide a structural interpretation of the underlying higher-relative-degree cascade under explicit structural assumptions. Numerical simulations demonstrate the induced safe-set geometry and its integration with an optimization-based control framework for obstacle avoidance.

Comment
The paper has been accepted for publication in the ASME Letters in Dynamic Systems and Control

Closest papers

Nearest neighbours by meaning across the whole index.

Singular Perturbations for Control Systems Safety

eess.SY math.OC ·2026-10-31 ·Stefano Di Gregorio, Guido Carnevale, Giuseppe Notarstefano
similarity 0.64
Abstract

Control Barrier Functions (CBFs) offer a powerful theory for enforcing safety in dynamical systems. Yet, applying this framework to complex systems is challenging when subsystems are feedback-interconnected and operate at different timescales. Such structures arise naturally in multiphysics systems and in control architectures where physical plants interact with optimization, estimation, and control algorithms. In many of these settings, safety involves only part of the system, motivating the design of reduced-order certificates. Inspired by singular perturbation theory, we establish sufficient conditions, involving separation between slow and fast dynamics, under which a reduced-order safety certificate can be lifted to the full interconnected system. Specifically, we construct a composite CBF ensuring forward invariance of a lifted subset of the original safe set. We also show that the certified safe set expands monotonically as the tuning parameter accelerating the fast dynamics is reduced. Numerical results validate the approach on two robotic systems: a planar 2-DoF manipulator with motor dynamics and a 6-DoF UR10e manipulator controlled by a suboptimal optimization algorithm.

0.16

BubbleCBF: Constructive Safety for Second-Order Systems and Application to Autonomous Robot Navigation in Unknown Environments

cs.RO ·2026-10-14 ·Mani Amani, Mohammed Alyaseen, Zhirui Dai, Ki Myung Brian Lee, Nikolay Atanasov +1 more
theory similarity 0.63
Abstract

Satisfying safety constraints for systems with second-order dynamics is challenging because a position constraint may require infeasible deceleration. Higher-order control barrier functions (CBFs) provide an approach for expressing safety conditions for such systems but feasibility depends on the system dynamics and available control authority. We develop a constructive approach for designing feasible safety constraints for second-order control-affine systems. Starting from a signed distance function (SDF), we construct collision-free spheres, i.e., bubbles, in position space, and use their quadratic geometry and overlap to construct a velocity-dependent safety constraint. The associated safe set is represented as a union of intersections and enforced through a quadratic-program safety filter. Under mild assumptions on the dynamics, bubble overlap, and design parameters, we prove that the quadratic-program-based controller is well defined, continuous in the system state, and renders the set forward invariant. We also derive sufficient conditions for feasibility under bounded inputs. We demonstrate that our BubbleCBF, applied to a differential-drive robot, achieves safe autonomous navigation in unknown environments. Videos and results are available at: https://existentialrobotics.org/bubblecbf/.

0.17

Hamilton-Jacobi Reachability for Hybrid Systems: Unified Goal-Driven Control with Safety Guarantees

cs.RO eess.SY ·2026-09-15 ·Javier Borquez, Shuang Peng, Somil Bansal
published similarity 0.58
Abstract

Hybrid dynamical systems provide a powerful modeling framework for robotic systems, particularly in contact-rich environments. However, ensuring safety and performance in such systems remains challenging due to the intricate coupling between continuous dynamics and discrete mode transitions. In this work, we extend classical Hamilton-Jacobi (HJ) reachability analysis, a formal verification method for continuous-time nonlinear systems, to hybrid dynamical systems. Our framework characterizes safe sets for hybrid systems through a generalized value function defined over both discrete and continuous states while accounting for control constraints and model uncertainty. We additionally provide a numerical algorithm to compute this value function. Building on these safe sets, we propose two different mechanisms to integrate performance objectives. First, we introduce a hybrid least-restrictive safety filter that intervenes on both the discrete and continuous components of a nominal controller only when necessary to avoid unsafe states, thereby preserving nominal behavior whenever possible. Second, we formulate and compute hybrid backward reach-avoid tubes, enabling the simultaneous enforcement of safety and goal-reaching behavior, an extension not previously addressed within hybrid HJ reachability. This enables the synthesis of continuous and discrete control policies that guarantee both safety and task completion. We validate our framework through simulation studies and real-world experiments on a quadrupedal robot, demonstrating its effectiveness in hybrid mode planning and safety-critical applications.

0.60

Inverse Optimal Feedback Stabilization of 3D Nonholonomic Vehicles in Spherical Coordinates

eess.SY math.OC ·2026-09-28 ·Kwang Hak Kim, Mamadou Diagne, Miroslav Krstic
similarity 0.58
Abstract · Submitted to the 2027 American Control Conference (ACC)

Inverse optimal control provides optimality and robustness guarantees without solving the Hamilton--Jacobi--Bellman (HJB) equation, but its application to 3D nonholonomic vehicles has been precluded by the absence of strict control Lyapunov functions (CLFs). Recently, such strict CLFs were constructed for the 3D nonholonomic vehicle in spherical coordinates, which circumvent Brockett's obstruction, on the largest possible domain. Building on this construction, this paper develops a general inverse optimal stabilizing controller for the 3D nonholonomic vehicle actuated by surge velocity, pitch rate, and yaw rate. The design is a damping $L_gV$ feedback that minimizes a meaningful cost and inherits stability margins. Its flexibility is demonstrated through two choices of penalty function: a quadratic running cost on the state, recovering a near-classical optimal control formulation, and stabilization under user-defined input constraints. Numerical simulations illustrate stabilization performance, control-effort tradeoffs, and the effect of input constraints.

0.16

SC3BF: Shifted Collision Cone Control Barrier Function for Dynamic Obstacle Avoidance

cs.RO cs.MAeess.SY ·2026-10-06 ·Amin Kashiri, Yasin Yazıcıoğlu
theory similarity 0.58
Abstract · Submitted to the 2027 American Control Conference (ACC)

The collision cone used by velocity-space control barrier functions is conservative: it rejects every relative velocity aimed into an obstacle, however slow. We propose the \emph{shifted collision-cone CBF} (SC3BF), which adds a state-dependent \emph{allowance} to the cone condition, so the robot may approach the obstacle at a rate that grows with distance and with its own speed. SC3BF is enforced by an ordinary quadratic program, and its safe set is forward invariant under bounded inputs without a minimum forward speed or a clearance margin. We prove that a nonzero allowance preserving safety always exists, and derive one in closed form. Against three velocity-space baselines on a kinematic bicycle among up to $100$ moving obstacles, SC3BF reaches the goal more often and modifies the nominal input less than half as much.

0.40

Safe Unicycle Navigation Among Multiple Obstacles Under Bounded Disturbances: A Learning-Augmented CLF-CBF Approach (Extended Version)

eess.SY ·2026-10-13 ·Shubham Singh, Anjali Tiwari, Anand Singh, Katsuki Fujisawa
similarity 0.57
Abstract

This paper presents a robust control framework for safe navigation of a unicycle robot to a goal among multiple static obstacles under an unknown, time-varying disturbance. The controller solves a single real-time quadratic program (QP) that combines a goal-reaching term with one safety term per obstacle. The goal-reaching term is a cross-track control Lyapunov function built from body-frame tracking errors rather than a bearing angle, which keeps its Lie derivatives bounded everywhere, including the goal. Safety is encoded using robust control barrier functions, one per obstacle, each tightened by a closed-form, state-dependent disturbance bound. When stabilization and safety conflict, a slack variable relaxes only the convergence requirement, so that the safety constraints remain strictly enforced. Whenever the QP is feasible, the robust barrier constraints guarantee forward invariance of every obstacle's safe set under all admissible disturbances. Complementing this safety guarantee, a Lyapunov analysis yields an explicit ultimate bound on the distance to the goal. A learning-augmented variant replaces the fixed objective with a reinforcement-learning reference, which accelerates convergence when multiple constraints are simultaneously active. We further derive the obstacle separation below which the gap between two obstacles becomes too narrow to pass through under the robust constraints. For such gaps, a learned virtual goal for the Lyapunov function steers the robot around the obstacles without compromising safety. Simulations, a Monte Carlo study, and a comparison against a sampled-data robust baseline support the theoretical results.

0.11

Safe Circumnavigation on Heterogeneous Orbits: A Range-Only HOCBF-QP Framework for Nonholonomic Multi-Agent Systems

cs.RO eess.SY ·2026-11-06 ·Shubham Singh, Anand Singh, Anjali Tiwari, Lara Briñón-Arranz, Katsuki Fujisawa
similarity 0.57
Abstract

Circumnavigating a stationary target with a team of robots requires each robot to hold its own standoff distance, to stay evenly spaced from its neighbours, and to avoid collisions with the target and with each other at every instant. The task becomes arduous when the robots are assigned different orbital radii, as their sensors or roles may demand. This paper presents a safety-critical control framework for this problem. Each robot commands both its acceleration and its turn-rate, measures only its distance to the target, and exchanges information only with its two ring neighbours. The design has three features. First, a structural property of the model lets one control law serve every robot regardless of its assigned radius. Second, the acceleration drives each radius exactly to its target, while the turn-rate balances the formation with the neighbours. Third, a higher-order control-barrier-function quadratic program enforces target, geofence, and inter-robot safety on both inputs at once; it leaves the nominal controller untouched away from the constraints and stays valid while the unmeasured range rate is still being estimated. Simulations confirm these guarantees. In a comparison, the closest existing multi-orbit design, even with full state information, violates both the target standoff and the inter-robot margin, whereas the proposed controller does not.

0.31

Density-Driven Area Coverage for Nonholonomic Multi-Robot Systems with Safety Guarantee

cs.RO cs.MAmath.OC ·2026-09-19 ·Julian Martinez, Kooktae Lee
hot direction similarity 0.57
Abstract

Density-Driven Optimal Control (D2OC) provides a principled approach to distributing multi-robot teams over non-uniform spatial distributions. Applying D2OC to nonholonomic robots, however, creates a gap between safety constraints imposed on a reference motion and the physical inputs that determine the actual robot motion. We address this issue by enforcing the safety constraint directly on the robot's physical inputs while preserving the density-driven coverage objective. The proposed framework combines D2OC with a control barrier function safety filter through a feedback-linearizing look-ahead point, allowing safety and actuator limits to be considered together during control. We further derive a safety margin that accounts for the look-ahead geometry, robot footprint, and motion during each control interval. Simulation results show that the proposed method maintains the required physical separation while achieving coverage performance comparable to a conventional reference-tracking approach, which can satisfy safety on the reference motion yet violate the corresponding physical clearance. Experiments on multiple nonholonomic robots in the Robotarium further demonstrate safe execution while driving the robots toward the desired spatial distribution. These results show that enforcing safety directly on the physical inputs can eliminate the mismatch between safety certification and physical robot motion in density-driven multi-robot coverage.

0.31