CS Paper Radar

Singular Perturbations for Control Systems Safety

Stefano Di Gregorio, Guido Carnevale, Giuseppe Notarstefano

eess.SY math.OC ·submitted 2026-10-31 21:05 UTC · v1

Abstract

Control Barrier Functions (CBFs) offer a powerful theory for enforcing safety in dynamical systems. Yet, applying this framework to complex systems is challenging when subsystems are feedback-interconnected and operate at different timescales. Such structures arise naturally in multiphysics systems and in control architectures where physical plants interact with optimization, estimation, and control algorithms. In many of these settings, safety involves only part of the system, motivating the design of reduced-order certificates. Inspired by singular perturbation theory, we establish sufficient conditions, involving separation between slow and fast dynamics, under which a reduced-order safety certificate can be lifted to the full interconnected system. Specifically, we construct a composite CBF ensuring forward invariance of a lifted subset of the original safe set. We also show that the certified safe set expands monotonically as the tuning parameter accelerating the fast dynamics is reduced. Numerical results validate the approach on two robotic systems: a planar 2-DoF manipulator with motor dynamics and a 6-DoF UR10e manipulator controlled by a suboptimal optimization algorithm.

Closest papers

Nearest neighbours by meaning across the whole index.

Lifting Safety Through Reduced-Order Model Architectures: An Invariant Manifold Approach

eess.SY math.OC ·2026-10-16 ·Massimiliano de Sa, Aaron D. Ames
similarity 0.70
Abstract · 8 pages, 2 figures, Submitted to the American Control Conference (ACC) 2027

Reduced-order model architectures are often used to decompose complex safety-critical control design tasks into tractable subproblems. In this paradigm, one must ask: when does the safety of a reduced-order model lift to safety of the full system? Taking an invariant manifold perspective, we provide necessary and sufficient conditions for the existence of smooth, regular lifts of compact safe sets from reduced-order models. Our characterization relies only on asymptotic stability of an embedding of a reduced-order safe set, without additional robustness or rate conditions. We apply these results to study control barrier functions in reduced-order model architectures and lifts of safe sets through cascades. Further, we use our conditions to obtain topological obstructions to the tracking of safe, kinematic reduced-order models for mechanical systems. We conclude by using these obstructions to inform safe hierarchical control design for an underactuated satellite on SE(3).

0.49

BubbleCBF: Constructive Safety for Second-Order Systems and Application to Autonomous Robot Navigation in Unknown Environments

cs.RO ·2026-10-14 ·Mani Amani, Mohammed Alyaseen, Zhirui Dai, Ki Myung Brian Lee, Nikolay Atanasov +1 more
theory similarity 0.67
Abstract

Satisfying safety constraints for systems with second-order dynamics is challenging because a position constraint may require infeasible deceleration. Higher-order control barrier functions (CBFs) provide an approach for expressing safety conditions for such systems but feasibility depends on the system dynamics and available control authority. We develop a constructive approach for designing feasible safety constraints for second-order control-affine systems. Starting from a signed distance function (SDF), we construct collision-free spheres, i.e., bubbles, in position space, and use their quadratic geometry and overlap to construct a velocity-dependent safety constraint. The associated safe set is represented as a union of intersections and enforced through a quadratic-program safety filter. Under mild assumptions on the dynamics, bubble overlap, and design parameters, we prove that the quadratic-program-based controller is well defined, continuous in the system state, and renders the set forward invariant. We also derive sufficient conditions for feasibility under bounded inputs. We demonstrate that our BubbleCBF, applied to a differential-drive robot, achieves safe autonomous navigation in unknown environments. Videos and results are available at: https://existentialrobotics.org/bubblecbf/.

0.17

Regions of Attraction of CBF-Based Safety Filters for Stable Planar Linear Systems

eess.SY ·2026-10-15 ·Adam K. Kiss, Pol Mestres, Andras Bartfai, Shima Sadat Mousavi, Aaron D. Ames
similarity 0.65
Abstract

In this paper we study the dynamical properties induced by safety filters based on control barrier functions (CBFs). These are obtained by minimally modifying a nominal controller with the goal of rendering it safe. We consider the simple setting of a planar linear plant with a stable linear nominal controller and an affine constraint. We show that even in this simple setting, the filtered system can oscillate or diverge while remaining safe. We fully characterize the parameters for which the origin is globally (exponentially or asymptotically) stable. For all other parameters, the filter creates a saddle on the constraint boundary, and we characterize the region of attraction of the origin. For underdamped nominal dynamics, its boundary is an unstable periodic orbit, a homoclinic loop, or the saddle's stable manifold, depending on whether the CBF gain is below, at, or above a homoclinic transition value. A vehicle sideslip example and two three-dimensional examples illustrate the results and what changes beyond planar dynamics.

0.18

Barrier Certificate Synthesis for Non-Polynomial Robotic Dynamics via Polynomial Lifting

cs.RO eess.SY ·2026-09-19 ·Shivam Chaubey, Francesco Verdoja, Shankar Deka, Ville Kyrki
similarity 0.64
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Safe operation of robotic systems requires trajectories to remain within a prescribed safe set under admissible control inputs. Barrier certificates provide such guarantees by certifying a controlled-invariant region within that set. Sum-of-squares optimization offers a systematic way to synthesize such certificates, but its direct application requires polynomial dynamics, excluding common robotic nonlinearities, including trigonometric terms. We address this limitation using exact polynomial lifting, which replaces non-polynomial dynamics with polynomial-augmented dynamics subject to lifting-induced algebraic constraints, preserving nonlinear geometry without approximation. We formulate lifted-domain joint barrier synthesis that computes a certificate with a state-feedback control witness and develop a sampled-data safety filter for zero-order-hold implementation. To assess whether the benefits of lifting persist across synthesis frameworks, we also adapt a sample-guided successive-barrier method to the lifted representation. On coordinated-turn and planar multirotor models, exact lifting improves certified coverage in both methods: at matched sample sizes, lifted successive-barrier synthesis achieves higher coverage with fewer barriers and lower computational cost, while lifted joint barrier synthesis provides higher coverage and lower computational cost than the finest tested piecewise resolution. In closed-loop experiments, the safety filter maintains feasibility and safety across all evaluated trajectories, reduces spatial conservativeness, and requires less intervention for both models.

0.30

Scaling-Based Reciprocal Control Barrier Functions for Nonholonomic Mobile Robots

eess.SY ·2026-08-23 ·Tianyu Han, Bo Wang
published similarity 0.64
Abstract · The paper has been accepted for publication in the ASME Letters in Dynamic Systems and Control

This paper studies the construction of control barrier functions (CBFs) for force-controlled nonholonomic mobile robots subject to relative-degree-two safety constraints arising from position-level obstacle avoidance. A scaling-based reciprocal barrier construction is proposed, in which a positive motion-dependent scaling factor is placed in the numerator of a reciprocal barrier associated with the original physical safety function. The resulting barrier is defined exactly on the interior of the physical safe set and becomes singular on its boundary, thereby preserving the certified interior domain of the original safety constraint while recovering first-order control authority. For a force-controlled nonholonomic robot model, sufficient conditions are derived under which the proposed construction defines a reciprocal CBF, and the interior of the physical safe set is forward invariant under controllers satisfying the induced reciprocal-CBF condition. A scalar strict-feedback system is further used to provide a structural interpretation of the underlying higher-relative-degree cascade under explicit structural assumptions. Numerical simulations demonstrate the induced safe-set geometry and its integration with an optimization-based control framework for obstacle avoidance.

0.52

A Recursive CBF Framework for Safety under State Uncertainty

eess.SY ·2026-09-16 ·Rahal Nanayakkara, Aaron D. Ames, Paulo Tabuada
similarity 0.64
Abstract · 8 pages, 4 figures, IEEE CDC 2026

The practical implementation of Control Barrier Functions (CBFs) for safety-critical control is often hindered by uncertainty in the knowledge of the state. While existing robust CBF methods address state uncertainty, they often lack recursive feasibility guarantees or fail when uncertainty levels are high, allowing the system to enter regions where no safe control input exists. To resolve this, we propose a novel framework of enforcing recursive CBFs. Rather than merely ensuring the invariance of the original safe set, this approach enforces the forward invariance of a subset of the safe region where a robustly safe control input is guaranteed to exist. This holistic framework ensures that the system never strays into ambiguous regions, providing continued feasibility and safety guarantees, regardless of the level of state uncertainty.

0.27

Neural Barriers: An Online Certifiable Learning-enhanced Adaptive High Order Safety Critical Control

cs.RO ·2026-10-04 ·Lishuo Pan, Mattia Catellani, An Cao, Lorenzo Sabattini, Nora Ayanian
similarity 0.64
Abstract · 14 pages, 11 figures, 3 tables

Control barrier functions are an effective model-based tool to formally certify the safety of a system. However, transferring their theoretical guarantees to real-world robotics systems requires high model fidelity. For example, payloads or wind disturbances can cause significant model perturbations to an aerial vehicle, leading to safety compromises. In this work, we propose a certifiable online learning-enhanced robust adaptive control barrier function, which adapts to disturbances using a Neural ODE and quantifies its adaptation uncertainty with conformal prediction. Our approach guarantees safety at all time under unknown time-varying model disturbances. It adopts a conservative strategy when the adaptation uncertainty is high; and efficiently adapts to reduce controller conservativeness as it receives more data. Our approach provides a provable safety guarantee with a probability bound under suitable Lipschitz smoothness assumptions on the underlying model and trajectory. These results demonstrate the potential of our method as a practical safety controller for robotics system operating under model perturbations.

0.23

Exact Feasibility Certification and Optimal Responsibility Allocation for Multi-Robot CBF Safety Filters

cs.RO cs.MA ·2026-09-14 ·Chandan Kumar Sah, Jishnu Keshavan
hot direction similarity 0.64
Abstract

Multi-robot Control Barrier Function (CBF) safety filters can become infeasible, but a failed quadratic program (QP) does not indicate why the conflict occurred or how to resolve it. To address this, we develop an exact feasibility certificate for multi-agent CBF filters with heterogeneous control-affine dynamics and convex input sets. The certificate quantifies a feasibility reserve by separating the demand imposed by safety constraints from the available actuator supply. This decomposition shows when CBF gain tuning or increased actuation can and cannot resolve infeasibility, and identifies the agents and interactions responsible for the conflict. We further propose an algorithm to optimally allocate shared safety constraints by maximizing the worst local feasibility margin, yielding a linear program for polyhedral input sets. In $320$ paired closed-loop simulations, the proposed allocation reduces infeasible control steps from roughly $50\%$ to $6.2\%$, and reduces safety-violating runs from $118/160$ to $24/160$. In addition, across $52$ infeasibility events, the certificate identifies an interaction whose relaxation restores feasibility in $94\%$ of cases.

0.31