CS Paper Radar

PreferenceFlow: Test-Time Guidance of Flow-Matching Robot Policies from Human Interventions

Yiqi Tang, Diyuan Shi, Runze Li, Donglin Wang

cs.RO ·submitted 2026-09-29 07:08 UTC · v1

Abstract

Flow-matching policies can represent complex robot behaviors but remain susceptible to local errors under distribution shift at deployment. Many reinforcement learning approaches to policy improvement require reward signals that are difficult to specify or obtain in real-world manipulation. We present PreferenceFlow, a framework for improving a pretrained flow policy at test time without environment rewards or updates to the base policy. Human intervention chunks are paired with robot chunks generated from the same initial conditioning state to train a preference model. During infer- ence, we adopt the QGF sampling update, replacing its value gradient with the preference gradient evaluated at an estimated clean action. A gradient-cap loss penalizes excessive gradients on intervention pairs, while a zero-gradient loss discourages guidance near actions from expert demonstrations. On four real-world precision insertion tasks with a Franka robot, Pref- erenceFlow achieves a mean success rate of 90.5%, compared with 69% for the frozen policy. Ablations support the roles of gradient regularization and correctly ordered preference labels in the evaluated settings. These results demonstrate the utility of human interventions as local preference supervision for guiding frozen generative robot policies.

Closest papers

Nearest neighbours by meaning across the whole index.

Progress-Guided Preference Generation for Aligning Generative Control Policies

cs.LG cs.AIcs.RO ·2026-10-19 ·Tung M. Luu, Tri Ton, Duc M. Nguyen, Xuan Thanh Nguyen, Nguyen Gia Binh +6 more
similarity 0.78
Abstract · CoRL 2026 (project site: https://pgpg2026.github.io/)

Generative policies have achieved strong performance in imitation learning tasks, but their success is often constrained by the limited availability of expert demonstrations. Although preference-based fine-tuning can leverage suboptimal rollouts to improve performance, existing approaches heavily rely on expensive human annotations. In this work, we introduce Progress-Guided Preference Generation (PGPG), an unsupervised preference alignment framework that eliminates the need for human-in-the-loop supervision. Our method leverages ordered coverage alignment to measure sequential progress relative to a small set of expert demonstrations, enabling the automatic extraction of pseudo-preference labels from autonomously collected rollouts. Furthermore, we introduce key enhancements to improve the reliability of these progress-guided preferences, enabling effective fine-tuning of pretrained generative policies without requiring manually designed reward functions. Extensive experiments across a suite of challenging long-horizon manipulation tasks demonstrate that PGPG outperforms standard supervised fine-tuning baselines. Moreover, our conceptually simple framework is broadly applicable across multiple classes of generative policies, demonstrating strong versatility when integrated with both diffusion and flow-matching policies.

0.40

RoboFFT: Finetuning generative robot policy via online reinforcement learning with forward process

cs.RO ·2026-09-26 ·Yu Li, Shenghe Hu, Yuhan Wang, Yaoxiang Pu, Haotong Zhang +2 more
published similarity 0.76
Abstract · Accepted by CoRL2026. Project Website: https://student-of-holmes.github.io/RoboFFT/

Generative models, such as diffusion and flow-based models, have shown strong promise for robot policy learning by capturing complex and multimodal action distributions from demonstrations. However, policies trained solely with imitation learning often suffer from imperfect demonstrations and distributional shifts, while further improvement typically requires additional expert data. Reinforcement learning offers a natural solution through environment interaction, but effectively finetuning generative robot policies remains challenging due to the intractability of likelihood estimation. In this work, we propose RoboFFT, a forward-process reinforcement learning framework for finetuning generative robot policies, which applies forward noising to sampled actions and uses the weighted score / flow matching loss to construct a surrogate policy ratio for PPO-style updates. We evaluate RoboFFT with popular generative robot policies on representative simulation benchmarks, including long-horizon planning and sparse reward settings. Extensive experiments and analysis demonstrate that RoboFFT consistently improves performance while achieving better stability and training efficiency. We further integrate RoboFFT into a real world RL framework and demonstrate its effectiveness in real world tasks. Project website: https://student-of-holmes.github.io/RoboFFT/.

0.58

Correct Robots Before They Make Mistakes: Proactive Human-in-the-Loop Intervention via Preference Learning

cs.RO ·2026-11-03 ·Xinkai Jiang, Jing Jiang, Hongyi Zhou, Pankhuri Vanjani, Ahmad Baki +5 more
code/data similarity 0.75
Abstract

This paper presents Proactive Human-in-the-Loop (PHIL), a framework for proactive policy correction and preference-based post-training. PHIL enables operators to preview policy-predicted future motion and intervene before anticipated undesirable actions. During takeover, PHIL continues querying the policy and displaying its predicted trajectories in the physical workspace through an extended reality (XR) interface. PHIL pairs rejected policy predictions with corrective action chunks subsequently executed from the same physical state over the same horizon, and preference-based post-training encourages the policy to favor these corrections. This paper evaluates PHIL on four real-world manipulation tasks using a diffusion policy and a pretrained vision-language-action policy. With five correction episodes per condition, PHIL increases mean success rates across the evaluated tasks and demonstration budgets from 44.0% to 70.3% for the diffusion policy and from 57.8% to 76.9% for X-VLA, compared with HG-DAgger. Separately, policies trained with proactive corrections show fewer unnecessary recovery behaviors in successful episodes. Project page: https://intuitive-robots.github.io/PHIL-page/.

0.20

From Pretraining to Proficiency: Real-World Subtask RL for Long-Horizon Manipulation with Minimal Human Intervention

cs.RO cs.LG ·2026-09-18 ·Sichang Su, Benjamin Yang, Zhiyun Deng, Boyuan Liang, Yip Fun Yeung +2 more
code/data similarity 0.75
Abstract · Project page: https://destiny000621.github.io/PARTS/

A pretrained robot foundation policy may execute most of a long-horizon task yet repeatedly fail at a few critical subtasks. Collecting additional full-task demonstrations for supervised fine-tuning (SFT) requires operators to repeat behaviors the policy already performs well. Reinforcement learning (RL) fine-tuning offers a promising path to bridge this gap, but existing approaches struggle to solve long-horizon tasks using only sparse rewards. We present PARTS (Policy Adaptation with RL on Targeted Subtasks), a real-world subtask RL framework that concentrates practice at these bottlenecks while allowing training rollouts to proceed with minimal human intervention. The frozen pretrained policy supplies nominal actions throughout execution, while agent-generated selectors and success verifiers activate residual corrections and provide local outcome rewards. These rewards support learning from successful subtasks even when complete-task successes are scarce. Training combines online RL with success-reweighted retraining, and each retrained residual policy is redeployed to collect further experience. Humans identify bottlenecks during setup and perform physical resets when needed. On bimanual YAM and single-arm Franka tasks, PARTS improves complete-task success from 32% to 61% and from 50% to 95%, respectively, using tens of minutes of real-world RL rollouts per task on average. Compared with existing real-world RL fine-tuning methods, PARTS raises full-task success by more than 25% under the same robot-rollout budget while requiring less human involvement.

0.47

Beyond Imitation: Self-Improving Robot Policies via Off-Policy Q-Planning

cs.RO cs.LG ·2026-08-21 ·Varun Giridhar, Anant Khandelwal, Jeremy A. Collins, Ignat Georgiev, Animesh Garg
benchmarkcode/datahighly cited similarity 0.75
Abstract · Project page with videos: https://varungiridhar.github.io/qplanning/

Behaviour Cloning (BC) has driven remarkable progress in robot manipulation, yet it is fundamentally limited by its inability to self-improve: a policy that fails cannot learn from that failure without additional human demonstrations. Reinforcement Learning fine-tuning offers a path to self-improvement but has proven difficult to scale to the multi-billion-parameter models underpinning modern robot policies. We propose Q-Planning, which equips a large visuomotor BC policy with a small off-policy Q-function. Because a Q-function estimates value rather than imitates actions, it can be trained on the same successful demonstrations as the BC policy and later absorb both successful and failed deployment rollouts, an asymmetry BC does not have. We exploit this asymmetry to enable value-guided action selection at inference (a single-step Q-weighted average over BC draws) and online self-improvement that fine-tunes only the Q-function, leaving the BC weights untouched. On LIBERO and bimanual RoboTwin, ten iterations of self-improvement lift every benchmark score we tested (LIBERO-10 93% to 99%, RoboTwin 83.8% to 91.4%) and shorten successful episodes on the near-ceiling suites (LIBERO-Object, LIBERO-Goal). On two contact-rich bimanual real-robot tasks, the same loop (BC frozen, no human intervention) improves purely from its own deployment rollouts: stack-cups 40% to 90% and insert-wallet 25% to 80% in five iterations, whereas SFT on successful rollouts alone stalls at 55% and 30%. Under an identical online budget Q-Planning is the only method, among Best-of-N, filtered SFT, IBRL, DSRL, and DAWR, that improves stably from failures without training an auxiliary actor.

0.53

ResMerge: Residual Policy Learning and Merging for Continual Adaptation of Pre-trained Robot Policies

cs.RO ·2026-10-30 ·Kefei Zhu, Lingyun Xu, Yue Xin, Xiaoqi Li, Caixin Guo +4 more
code/data similarity 0.75
Abstract · 9 pages. Code: https://github.com/ResMerge/resmerge-official

Continual adaptation to new tasks is essential for robots deployed in the real world, but adapting pre-trained policies remains challenging due to parameter growth and the need for continual demonstration collection. Parameter-Efficient Continual Fine-Tuning (PECFT) isolates task-specific updates, but adapter-per-task designs require demonstrations and grow with the task set. We propose ResMerge, a two-stage framework that learns mergeable residual policies atop a frozen pre-trained policy: residual reinforcement learning (RL) acquires task-specific corrections without additional expert demonstrations during adaptation, and parameter-space merging consolidates compatible residuals to reduce stored parameters. We introduce Residual-Field Consistency (RFC), a simple, bounded, and interpretable metric that assesses compatibility in residual action-field space by comparing correction direction and magnitude. Experiments on LIBERO across two backbones and on a real-world Franka robot show improved continual learning performance over strong PECFT baselines, while selective merging reduces the residual-parameter footprint. Project website: https://resmerge.github.io/.

0.26

PrefPI: Preference-Guided Steering into Out-of-Distribution Behaviors

cs.RO cs.AIcs.LG ·2026-09-30 ·Seungeun Rho, Wontaek Kim, Danfei Xu, Sehoon Ha
similarity 0.74
Abstract

We present PrefPI (Preference-Guided Policy Iteration), an iterative framework for steering pretrained generative robot policies using only relative preferences over self-generated trajectories. Unlike prior preference-learning methods that primarily sharpen modes already represented by the policy, we study steering beyond the initial effective support, where desired behaviors are rarely or never observed under the initial policy. Our key idea is to formulate preference learning as preference-conditioned generative modeling: preferred trajectories define a conditional distribution, whose density ratio with the broader behavior prior provides an implicit preference signal amplified by classifier-free guidance (CFG). Repeating this preference-conditioned modeling and guidance step yields a form of preference-guided policy iteration, turning incremental improvements toward previously inaccessible behaviors. Across diffusion policies and the PI0.5 flow- matching VLA in simulation and the real world, PrefPI produces substantial behavioral shifts with limited feedback. In particular, PrefPI increases object transport height from 10.7 cm to 19.8 cm on real hardware with only 150 preference-labeled trajectories.

0.21

FreeSpeed: Training-Free Speed Control for Generative Robot Policies

cs.RO ·2026-10-05 ·Yuxuan Hu, Shilin Shan, Qiheng Wang, Jinghan Yang, Junqiao Fan +2 more
code/data similarity 0.74
Abstract · 37 pages, 21 figures, 14 tables. Project page: https://yuxuanhu9.github.io/FreeSpeed/

Online control of execution speed is essential for deploying robot policies in real-world scenarios, as robots may need to speed up under time constraints or slow down to facilitate human interaction and improve safety. However, imitation-learned policies inherit the execution speed of their demonstrations, and test-time speed modification can introduce unrecoverable out-of-distribution observations, reducing task success. We observe that the directional inconsistency of action chunks reflects task-phase criticality, indicating how aggressively action step lengths can be modified while preserving task success. Based on this observation, we introduce FreeSpeed, a training-free module that post-processes action chunks from pretrained policies. FreeSpeed resamples each predicted chunk at the requested rate, then uses directional inconsistency between adjacent actions as the primary signal for rescaling. This signal adaptively determines how closely the execution speed can approach the requested speed, allowing flexible speed adjustment within the evaluated limits without compromising task success. Across three policy families and 50 simulated tasks, FreeSpeed supports online speed changes, with realized execution rates spanning 0.22x to 2.53x among settings that preserve per-task success. Across four real-world manipulation tasks, FreeSpeed achieves an average success rate of 94.0%, matching the frozen policy's 93.8%, while realizing execution rates from 0.38x to 1.97x.

0.59