CS Paper Radar

Beyond Imitation: Self-Improving Robot Policies via Off-Policy Q-Planning

Varun Giridhar, Anant Khandelwal, Jeremy A. Collins, Ignat Georgiev, Animesh Garg

cs.RO cs.LG ·submitted 2026-08-21 15:18 UTC · v1
benchmarkcode/datahighly cited

Abstract

Behaviour Cloning (BC) has driven remarkable progress in robot manipulation, yet it is fundamentally limited by its inability to self-improve: a policy that fails cannot learn from that failure without additional human demonstrations. Reinforcement Learning fine-tuning offers a path to self-improvement but has proven difficult to scale to the multi-billion-parameter models underpinning modern robot policies. We propose Q-Planning, which equips a large visuomotor BC policy with a small off-policy Q-function. Because a Q-function estimates value rather than imitates actions, it can be trained on the same successful demonstrations as the BC policy and later absorb both successful and failed deployment rollouts, an asymmetry BC does not have. We exploit this asymmetry to enable value-guided action selection at inference (a single-step Q-weighted average over BC draws) and online self-improvement that fine-tunes only the Q-function, leaving the BC weights untouched. On LIBERO and bimanual RoboTwin, ten iterations of self-improvement lift every benchmark score we tested (LIBERO-10 93% to 99%, RoboTwin 83.8% to 91.4%) and shorten successful episodes on the near-ceiling suites (LIBERO-Object, LIBERO-Goal). On two contact-rich bimanual real-robot tasks, the same loop (BC frozen, no human intervention) improves purely from its own deployment rollouts: stack-cups 40% to 90% and insert-wallet 25% to 80% in five iterations, whereas SFT on successful rollouts alone stalls at 55% and 30%. Under an identical online budget Q-Planning is the only method, among Best-of-N, filtered SFT, IBRL, DSRL, and DAWR, that improves stably from failures without training an auxiliary actor.

Comment
Project page with videos: https://varungiridhar.github.io/qplanning/

Closest papers

Nearest neighbours by meaning across the whole index.

Max-Q Selective Imitation for Human-in-the-Loop Online Robot Learning

cs.RO cs.AI ·2026-08-15 ·Zihang Wang, Yishan Wang
similarity 0.80
Abstract

Human-in-the-loop (HIL) online reinforcement learning for real robots must absorb human interventions quickly while continuing to improve beyond the human prior. We present a training method for this setting based on two components. First, an \emph{MC Q-chunk} critic regresses chunk-level action values onto Monte Carlo returns from the replay buffer, performing sample-average (behavior) policy evaluation so that intervention trajectories are credited directly rather than diluted by current-policy TD backups. Second, \emph{max-Q selective imitation} updates the actor by imitating, at each state, the higher-$Q$ action between the current policy action and a buffer sample under a hard winner-take-all rule. This rule automatically switches between learning from interventions and on-policy self-improvement: when the autonomous policy is stronger, targets align with the policy distribution, reducing the policy--target-sample gap that otherwise induces execution-time distribution shift. In practice we score candidates with a standard critic ensemble mean to reduce comparison noise, without softening targets or introducing score-gap thresholds. On a real USB pick-and-insertion task with 20 demonstrations, ACT QChunk-MCBC attains 99\% success within 30 minutes of HIL training, whereas HIL-SERL requires about 5 hours to converge. In simulation on Peg Insertion and Square, ACT/Flow Q-chunk variants similarly reach $\ge$96\% success within roughly half an hour of effective training, outperforming HIL-SERL, EXPO, and E2HiL on the success--time frontier.

0.38

Learning Quality-Controllable Robot Policies with Iterative Hindsight Relabeling

cs.RO cs.AIcs.LG ·2026-10-27 ·Sinjae Kang, Dong Kyu Shin, Jaehong Kim, Kamin Lee, Hyoeun Kim +4 more
similarity 0.78
Abstract

Robot policy evaluation often relies on a binary success signal for task completion. In real-world deployment, however, desired execution behaviors are also defined by quality attributes such as execution speed and motion smoothness, which need to be dynamically controlled according to task requirements. To address this, we introduce Quality-Controllable Policy (QCP), a robot policy that enables inference-time control over both individual quality attributes and their combinations. To extend the controllable quality range beyond initial demonstrations, we further propose an iterative hindsight relabeling loop: QCP collects online rollouts under target quality labels, adds successful trajectories to the dataset, relabels the accumulated trajectories in hindsight according to their measured quality, and fine-tunes the policy. Experiments on Robomimic and RoboEval demonstrate that QCP consistently improves both task execution quality and success rates across iterations, producing successful rollouts that exceed the quality of the initial demonstrations. Finally, we validate QCP on real-world manipulation tasks, where controlling speed increases throughput in conveyor operations and controlling transport stability improves success when carrying wine glasses, demonstrating that quality-controllable policies yield practical gains in physical deployment.

0.17

Mulligan: Performance-Guided Data Collection for Efficient On-Robot Learning

cs.RO cs.LG ·2026-10-05 ·Lars Ankile, Perry Dong, Rohan Bhowmik, Aneesh Muppidi, David D. Yuan +2 more
code/data similarity 0.78
Abstract · Project page: https://mulligan.page/

Learning from human demonstrations is a reliable way to teach robots new tasks, but the gains from each additional demonstration shrink as the policy improves. Continued improvement can instead come from supervised deployment, where an operator places the objects and intervenes when the policy fails. We ask how to maximize improvement from a fixed budget of supervised episodes on high-precision manipulation tasks with wide ranges of object placements. We observe that failures can concentrate in a small subset of initial states, so uniform collection spends much of the operator's time on states the policy already handles. Mulligan makes the initial-state distribution a decision, starting each round's episodes at observed failures and untried states. To further improve data efficiency, we augment interactive imitation learning with a value function trained on all data, including failures that imitation discards. Across three real-world tasks evaluated on 2,550 held-out, blinded episodes and two simulated tasks, Mulligan outperforms uniform initial-state sampling at matched collection budgets, and combined with value-based action selection, HiL-IDQL+Mulligan, improves final real-task success by 10-34 percentage points. With operator interventions, the human-robot team completes 98% of collection episodes, remaining productive while the policy learns. Videos, code, and data are available at https://mulligan.page/.

0.29

Training in Deployment: Human-in-the-loop Online Post-Training for Robot Manipulation

cs.RO ·2026-10-21 ·Chun Gu, Xiaofei Wei, Yiming Chen, Bozhou Zhang, Juntong Zhang +2 more
code/data similarity 0.77
Abstract · 9 pages, 8 figures. Project page: https://logosintelligencelab.github.io/TIDE/

Large pretrained robot foundation models provide strong priors for manipulation, yet adapting them to target tasks with offline teleoperated demonstrations often fails to cover the contact-rich, recovery, and precision-critical states encountered during deployment. Existing methods mitigate this issue by augmenting offline demonstrations with human-in-the-loop data or online reinforcement learning. Despite this, offline post-training adapts slowly because it cannot immediately absorb deployment experience, while online RL typically relies on value functions or auxiliary actor-critic models, increasing both training complexity and instability. We present TIDE (Training In DEployment), a human-in-the-loop online post-training system. TIDE introduces a provenance-conditioned supervised learning framework that updates the policy online from human interventions and policy-generated rollouts collected during deployment, without a learned critic, reward model, or action scorer. Across four real-world bimanual manipulation tasks, TIDE improves milestone-normalized task progress and binary full-task completion over the warm-start policy and matched additional offline demonstrations, and performs comparably to the fixed-policy collection baseline while making updated checkpoints available during deployment. Each task-specific online post-training session, from the start of deployment rollouts until the final checkpoint is available, completes in less than one hour while learning and checkpoint handling run asynchronously.

0.27

Beyond State-as-Action: Exploiting Command-State Discrepancy for Robot Imitation Learning

cs.RO ·2026-09-27 ·Peiyan Li, Yueran Tao, Enhao Zhang, Zhixuan Zhao, Chenghao Yue +8 more
code/data similarity 0.76
Abstract · 8 pages, 10 figures. Corrected affiliation name to SEEN-E Robotics, added the project page link to the abstract, and clarified wording and f…

Constructing action targets from measured robot motion is an established approach in imitation learning. Under interaction constraints, however, command-state discrepancy may reflect control demands that motion alone does not capture. We investigate when this information matters and how to exploit it. Across three real-robot tasks, task and phase analyses reveal larger supervision gaps under constrained interaction, while selective command retention provides evidence of locally useful command information. Building on these findings, we propose Command-State Discrepancy Weighting (CSDW), which accounts for robot response times and combines subsequent progress, persistent unmet demand, and demand changes into continuous weights for command supervision. The method requires no task-phase annotations or changes to policy architecture or inference. CSDW improves over uniform command supervision on constrained tasks, while methods perform similarly in the less constrained task. Project page: https://seen-e.github.io/CSDW/.

0.32

Task-Space Imitation Guidance for Efficient Reinforcement Learning

cs.RO ·2026-10-05 ·Salar Asayesh, Hossein Darani, Todd Cao, Evgeny Andriash, Mani Ranjbar
publishedsurvey similarity 0.75
Abstract · Accepted at CoRL 2026

We introduce Task-Space Imitation Guidance for Efficient Reinforcement Learning (TIGER), a reward-construction and pretraining framework for sparse-reward tabletop robotic manipulation. TIGER treats an action-chunked imitation policy not as an executable controller or action prior, but as a local task-space progress estimator: predicted action chunks are converted, using controller-aware action-to-motion mapping, into short-horizon end-effector references, and the RL agent receives dense progress rewards toward these references while the sparse environment reward remains the dominant objective. During pretraining, TIGER uses imitation-guided look-ahead signals to relax conservative value penalties for actions predicted to make task-space progress, reducing off-manifold exploration during early online RL. Across simulation and real-robot experiments, TIGER improves early sample efficiency and reduces measured safety violations while matching or improving final success rates relative to prior RL and IL-RL baselines on the evaluated tasks. Videos and an overview of this work are available at https://sanctuary.ai/news/tiger/.

0.36

PreferenceFlow: Test-Time Guidance of Flow-Matching Robot Policies from Human Interventions

cs.RO ·2026-09-29 ·Yiqi Tang, Diyuan Shi, Runze Li, Donglin Wang
similarity 0.75
Abstract

Flow-matching policies can represent complex robot behaviors but remain susceptible to local errors under distribution shift at deployment. Many reinforcement learning approaches to policy improvement require reward signals that are difficult to specify or obtain in real-world manipulation. We present PreferenceFlow, a framework for improving a pretrained flow policy at test time without environment rewards or updates to the base policy. Human intervention chunks are paired with robot chunks generated from the same initial conditioning state to train a preference model. During infer- ence, we adopt the QGF sampling update, replacing its value gradient with the preference gradient evaluated at an estimated clean action. A gradient-cap loss penalizes excessive gradients on intervention pairs, while a zero-gradient loss discourages guidance near actions from expert demonstrations. On four real-world precision insertion tasks with a Franka robot, Pref- erenceFlow achieves a mean success rate of 90.5%, compared with 69% for the frozen policy. Ablations support the roles of gradient regularization and correctly ordered preference labels in the evaluated settings. These results demonstrate the utility of human interventions as local preference supervision for guiding frozen generative robot policies.

0.48

SpeedTuning: Speeding Up Policy Execution with Lightweight Reinforcement Learning

cs.RO cs.AI ·2026-08-10 ·David D. Yuan, Tony Z. Zhao, Kaylee Burns, Chelsea Finn
top venuecode/datahighly cited similarity 0.75
Abstract · 10 pages, 12 figures. This arXiv version includes an appendix with qualitative simulation rollouts and additional ablations. Published at IC…

While learned robotic policies hold promise for advancing generalizable manipulation, their practical deployment is often hindered by suboptimal execution speeds. Imitation learning policies are inherently limited by hardware constraints and the speed of the operator during data collection. In addition, there are no established methods for accelerating policies learned via imitation, and the empirical relationship between execution speed and task success remains underexplored. To address these issues, we introduce SpeedTuning, a reinforcement learning framework specifically designed to enhance the speed of manipulation policies. SpeedTuning learns to predict the optimal execution speed for actions, thereby complementing a base policy without necessitating additional data collection. We provide empirical evidence that SpeedTuning achieves substantial improvements in execution speed, exceeding 2.4x speed-up, while preserving an adequate success rate compared to both the original task policy and straightforward speed-up methods such as linear interpolation at a fixed speed. We evaluate our approach across a diverse set of dynamic and precise tasks, including pouring, throwing, and picking, demonstrating its effectiveness and robustness in enhancing real-world robotic manipulation. Videos and code are available at https://daivdyuan.github.io/speed-tuning/

0.95