CS Paper Radar

Learning Quality-Controllable Robot Policies with Iterative Hindsight Relabeling

Sinjae Kang, Dong Kyu Shin, Jaehong Kim, Kamin Lee, Hyoeun Kim, Kaixin Wang, Li Zhao, Seonghyeon Ye, Kimin Lee

cs.RO cs.AIcs.LG ·submitted 2026-10-27 15:15 UTC · v1

Abstract

Robot policy evaluation often relies on a binary success signal for task completion. In real-world deployment, however, desired execution behaviors are also defined by quality attributes such as execution speed and motion smoothness, which need to be dynamically controlled according to task requirements. To address this, we introduce Quality-Controllable Policy (QCP), a robot policy that enables inference-time control over both individual quality attributes and their combinations. To extend the controllable quality range beyond initial demonstrations, we further propose an iterative hindsight relabeling loop: QCP collects online rollouts under target quality labels, adds successful trajectories to the dataset, relabels the accumulated trajectories in hindsight according to their measured quality, and fine-tunes the policy. Experiments on Robomimic and RoboEval demonstrate that QCP consistently improves both task execution quality and success rates across iterations, producing successful rollouts that exceed the quality of the initial demonstrations. Finally, we validate QCP on real-world manipulation tasks, where controlling speed increases throughput in conveyor operations and controlling transport stability improves success when carrying wine glasses, demonstrating that quality-controllable policies yield practical gains in physical deployment.

Closest papers

Nearest neighbours by meaning across the whole index.

Beyond Imitation: Self-Improving Robot Policies via Off-Policy Q-Planning

cs.RO cs.LG ·2026-08-21 ·Varun Giridhar, Anant Khandelwal, Jeremy A. Collins, Ignat Georgiev, Animesh Garg
benchmarkcode/datahighly cited similarity 0.78
Abstract · Project page with videos: https://varungiridhar.github.io/qplanning/

Behaviour Cloning (BC) has driven remarkable progress in robot manipulation, yet it is fundamentally limited by its inability to self-improve: a policy that fails cannot learn from that failure without additional human demonstrations. Reinforcement Learning fine-tuning offers a path to self-improvement but has proven difficult to scale to the multi-billion-parameter models underpinning modern robot policies. We propose Q-Planning, which equips a large visuomotor BC policy with a small off-policy Q-function. Because a Q-function estimates value rather than imitates actions, it can be trained on the same successful demonstrations as the BC policy and later absorb both successful and failed deployment rollouts, an asymmetry BC does not have. We exploit this asymmetry to enable value-guided action selection at inference (a single-step Q-weighted average over BC draws) and online self-improvement that fine-tunes only the Q-function, leaving the BC weights untouched. On LIBERO and bimanual RoboTwin, ten iterations of self-improvement lift every benchmark score we tested (LIBERO-10 93% to 99%, RoboTwin 83.8% to 91.4%) and shorten successful episodes on the near-ceiling suites (LIBERO-Object, LIBERO-Goal). On two contact-rich bimanual real-robot tasks, the same loop (BC frozen, no human intervention) improves purely from its own deployment rollouts: stack-cups 40% to 90% and insert-wallet 25% to 80% in five iterations, whereas SFT on successful rollouts alone stalls at 55% and 30%. Under an identical online budget Q-Planning is the only method, among Best-of-N, filtered SFT, IBRL, DSRL, and DAWR, that improves stably from failures without training an auxiliary actor.

0.53

SpeedTuning: Speeding Up Policy Execution with Lightweight Reinforcement Learning

cs.RO cs.AI ·2026-08-10 ·David D. Yuan, Tony Z. Zhao, Kaylee Burns, Chelsea Finn
top venuecode/datahighly cited similarity 0.78
Abstract · 10 pages, 12 figures. This arXiv version includes an appendix with qualitative simulation rollouts and additional ablations. Published at IC…

While learned robotic policies hold promise for advancing generalizable manipulation, their practical deployment is often hindered by suboptimal execution speeds. Imitation learning policies are inherently limited by hardware constraints and the speed of the operator during data collection. In addition, there are no established methods for accelerating policies learned via imitation, and the empirical relationship between execution speed and task success remains underexplored. To address these issues, we introduce SpeedTuning, a reinforcement learning framework specifically designed to enhance the speed of manipulation policies. SpeedTuning learns to predict the optimal execution speed for actions, thereby complementing a base policy without necessitating additional data collection. We provide empirical evidence that SpeedTuning achieves substantial improvements in execution speed, exceeding 2.4x speed-up, while preserving an adequate success rate compared to both the original task policy and straightforward speed-up methods such as linear interpolation at a fixed speed. We evaluate our approach across a diverse set of dynamic and precise tasks, including pouring, throwing, and picking, demonstrating its effectiveness and robustness in enhancing real-world robotic manipulation. Videos and code are available at https://daivdyuan.github.io/speed-tuning/

0.95

RoboFQE: Rollout-Free Evaluation of Visual Robot Policies from Offline Trajectories

cs.RO ·2026-10-13 ·Yunfu Deng, Sangwoo Shin, Brahma S. Pavse, Josiah P. Hanna
similarity 0.77
Abstract

Evaluating robot policies before deployment typically requires producing new trajectories through real-world execution, simulators, or learned world models. These rollout-based approaches impose infrastructure requirements; simulator and world-model evaluators additionally face prediction errors that can compound over the evaluation horizon. In this paper, we study off-policy evaluation as an alternative to rollout-based robot-policy evaluation methods. Specifically, we introduce RoboFQE, an evaluator that estimates the discounted expected return of a target policy from offline robot trajectories without estimating a behavior-policy density, combining fitted Q-evaluation with a pretrained vision foundation model and learned terminal success annotation to bridge the gap between standard OPE benchmarks and continuous-control visual manipulation. Controlled experiments across simulated and real-world manipulation tasks show that RoboFQE produces accurate discounted-return estimates and preserves policy rankings even on long-horizon manipulation tasks where video world-model evaluators are degraded by autoregressive prediction errors. Ablation experiments show that pretrained vision encoders substantially outperform from-scratch alternatives, particularly on long-horizon tasks, and that learned terminal success annotation enables evaluation without ground-truth reward labels with only slight reduction of accuracy.

0.17

DynaForge: Planning-Guided Residual Learning for Dynamic Manipulation Demonstration Generation

cs.RO ·2026-09-22 ·Yiyang Jin, Yu Zheng, Xiao He, Hesheng Wang
similarity 0.76
Abstract · 8 pages, 6 figures. Under review

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

0.24

VAMPS: Visual and Motor Policies from Sampling-Based Planning

cs.RO cs.AIcs.LG ·2026-10-04 ·Mohamed Yassine Kabouri, Pietro Noah Crestaz, Quang-Nam Nguyen, Qilong Cheng, Ludovic Righetti +1 more
similarity 0.75
Abstract

Learning robot policies directly on physical systems remains difficult because data collection is costly and policy exploration can be unsafe. We introduce Visual and Motor Policies from Sampling-Based Planning (VAMPS), a framework that uses Model Predictive Path Integral (MPPI) control to train reusable policies without human demonstrations. VAMPS supports two training modes. For one-step proprioceptive policies, it operates iteratively in simulation: the policy warm-starts MPPI, and the refined trajectories provide new supervision as the policy changes. A learned terminal value improves short-horizon planning, while an Implicit Q-Learning (IQL) critic guides the policy update. Iterative refinement outperforms training once on frozen MPPI data, and we transfer the learned locomotion policy to a Unitree Go2. For visuomotor policies, VAMPS operates directly from real-robot data. MPPI uses task-specific state estimates to plan and execute trajectories while recording RGB and sensor observations on a Flexiv Rizon 10S. Action Chunking with Transformers predicts action chunks, reducing the effective prediction horizon, and is trained offline on this fixed dataset. We demonstrate visuomotor pick-and-place and force-aware whiteboard erasing. In the latter task, the policy additionally observes the measured $6$-D wrench and desired normal force. These results show that VAMPS can learn policies either in simulation followed by hardware transfer or directly from autonomously collected real-robot data.

0.18

Correct Robots Before They Make Mistakes: Proactive Human-in-the-Loop Intervention via Preference Learning

cs.RO ·2026-11-03 ·Xinkai Jiang, Jing Jiang, Hongyi Zhou, Pankhuri Vanjani, Ahmad Baki +5 more
code/data similarity 0.75
Abstract

This paper presents Proactive Human-in-the-Loop (PHIL), a framework for proactive policy correction and preference-based post-training. PHIL enables operators to preview policy-predicted future motion and intervene before anticipated undesirable actions. During takeover, PHIL continues querying the policy and displaying its predicted trajectories in the physical workspace through an extended reality (XR) interface. PHIL pairs rejected policy predictions with corrective action chunks subsequently executed from the same physical state over the same horizon, and preference-based post-training encourages the policy to favor these corrections. This paper evaluates PHIL on four real-world manipulation tasks using a diffusion policy and a pretrained vision-language-action policy. With five correction episodes per condition, PHIL increases mean success rates across the evaluated tasks and demonstration budgets from 44.0% to 70.3% for the diffusion policy and from 57.8% to 76.9% for X-VLA, compared with HG-DAgger. Separately, policies trained with proactive corrections show fewer unnecessary recovery behaviors in successful episodes. Project page: https://intuitive-robots.github.io/PHIL-page/.

0.20

RoboIRS: Inference-Time Internal Representation Steering for Generalist Robot Policies

cs.RO ·2026-10-03 ·Jiuzhou Lei, Chang Liu, Dayou Li, Zhiyuan Zhang, Xiao Liang +3 more
similarity 0.75
Abstract

Vision-language-action (VLA) and world-action models (WAMs) often degrade under out-of-distribution task variations despite retaining partial task capability. To recover such capability, we propose RoboIRS, an inference-time internal representation steering method that uses successful and failed rollouts to train linear classifiers, select outcome-relevant intervention locations, and derive task-specific steering directions without updating policy parameters. On 15 simulation tasks with a frozen $π0.5$ policy, RoboIRS improves the average success rate from 44.4% to 66.2%, outperforming alternative inference-time intervention baselines while adding little inference time. We further validate RoboIRS on real-robot manipulation using the same $π0.5$ policy and demonstrate its applicability to a world-action model Cosmos Policy, where the average success rate improves from 35.4% to 55.4%. These results show that directly steering internal robot-policy representations can improve the performance of robot policies at inference time. Project website is available at https://rollingoat.github.io/roboirs/.

0.29

DriftOPD: Sequence-Level Reverse-KL Distillation for One-Step VLA Policies

cs.RO cs.AIcs.CVcs.LG ·2026-09-29 ·Youngjun Jun, Kyumin Choi, Youngmin Kim, Seonghyun Jin, Sunwoo Park +2 more
similarity 0.74
Abstract · Preprint

Vision-Language-Action (VLA) models increasingly rely on action experts that generate short action chunks under receding-horizon control. While chunk-level training is convenient across robot embodiments, it optimizes local action likelihood without explicitly accounting for long-horizon task success. Sequence-level reinforcement learning can address this limitation, but typically requires policy rollouts and closed-loop interaction, which are costly for real-robot manipulation. We introduce DriftOPD, a teacher-free, rollout-free framework for sequence-level on-policy distillation of continuous VLA action experts. We show that the sequence-level reverse Kullback-Leibler (KL) divergence decomposes into a chunk-level reverse-KL term and a future-potential term that captures the long-horizon effect of the current action. DriftOPD optimizes these two terms using a one-step drifting objective and a Q-function critic learned from offline demonstrations, respectively, enabling sequence-level optimization with only offline data and one-step action generation. Across multiple VLA architectures in simulation and real-world manipulation, DriftOPD generally outperforms existing one-step distillation baselines while achieving task success performance comparable to multi-step teacher policies. These results demonstrate that long-horizon behavior can be effectively distilled into one-step VLA action experts without online interaction or a separate teacher.

0.22