CS Paper Radar

Periodicity and image registration for yarn path extraction in large 3D textiles

Hafsa El Herichi, Arturo Mendoza, Yanneck Wielhorski, Hugues Talbot, Stéphane Roux

eess.SP ·submitted 2026-09-29 08:22 UTC · v1
published

Abstract

Accurate identification of yarns in X-ray computed tomography volumes remains a critical and complex step in generating high-fidelity numerical models of woven composites. This work introduces a tracking framework that leverages the intrinsic periodicity of woven architectures to transform a complex, large-scale segmentation problem into the annotation of a single representative unit cell. The approach first exploits the periodic nature of the weave to extract a representative unit cell from the volumetric data and segment it to provide a reference description of the yarn geometry. Digital Volume Correlation (DVC) is then performed between an idealised periodic volume obtained by replication of the unit cell and the real composite volume, yielding a three-dimensional displacement field that captures geometric deviations from ideal periodicity. The unit-cell yarn segmentation is propagated to the full volume by exploiting the periodicity of the reference volume, and the annotations are transported to the actual volume using the DVC-derived displacement field. Results obtained on real composite datasets demonstrate the ability of the method to accurately recover warp and weft yarn architectures with minimal input, opening new perspectives for efficient and scalable textile composite characterisation.

Journal ref
Composites Part B: Engineering, 2027, 328, pp.114159

Closest papers

Nearest neighbours by meaning across the whole index.

Yarn tracking of large-scale 3D textile reinforcements using topological material features

cs.CV eess.IVeess.SP ·2026-09-15 ·Hafsa El Herichi, Arturo Mendoza, Yanneck Wielhorski, Hugues Talbot, Stéphane Roux
published similarity 0.82
Abstract

Automated segmentation of CT images has become increasingly important to enhance the reliability of simulations through the generation of high fidelity numerical models. This study addresses the challenging task of semi-automatically tracking textile reinforcements in fan blade dry preforms using X-ray CT images captured at coarse resolutions (i.e., above 140 $μ$m). Our approach offers a scalable, slice-based analysis conducted on planes orthogonal to the main yarn directions, applied to a large-scale real industrial component. This enables accurate identification and tracking of yarn paths while requiring minimal training. The method models three key yarn properties statistically: their typical cross-section shape, their continuity and movement in the 3D space, and their spatial relative arrangement with respect to neighboring yarns. These statistical properties are integrated into a tracking framework via a variational formulation that optimizes all yarn center positions in successive cross-section planes. The method tracks more than 3,000 warp yarns across 1,500 slices and achieves a tracking success rate above 90%. Overall, this work demonstrates a promising approach toward large-scale, automated textile reinforcement annotation, paving the way for more efficient material characterization in complex composite structures.

0.59

CT2Yarn: Yarn-Level Reconstruction of Crochet from Computed Tomography

cs.GR ·2026-09-07 ·Chang Luo, Nobuyuki Umetani
unusual similarity 0.68
Abstract · Accepted to the Conference Track of Pacific Graphics 2026

We introduce CT2Yarn, a human-in-the-loop framework for recovering a single continuous yarn path from micro-computed tomography (micro-CT) scans of real crochet objects. Crochet is a craft that creates complex three-dimensional shapes by interlocking loops formed from a single yarn. Recovering the underlying yarn path from external observations is challenging because of severe self-occlusion. While micro-CT reveals the full internal structure of a crochet object, the volumetric scan alone does not explicitly encode how the yarn traverses the object. This challenge stems from the hierarchical structure of yarn: a yarn consists of multiple twisted plies, and each ply itself consists of twisted fibers. Consequently, local fiber orientations observed in micro-CT scans are not aligned with the overall yarn direction. To recover yarn-level orientations from ply-level fiber orientations, we first estimate local fiber directions using Gabor filtering and convert the volume into an oriented point cloud. We then introduce an anisotropic mean-shift procedure that aggregates local fiber orientations within a neighborhood of the yarn radius into yarn-level orientation estimates. Combined with an automatic topology skeletonization strategy, our method extracts yarn-path fragments. Subsequent fragment linking, junction cleaning, and loop detection merge these trees into a small number of long curves. Where the automatic reconstruction remains ambiguous, a sketch-based user interface enables users to interactively complete the single continuous yarn path. The recovered yarn path enables downstream applications including physically based simulation, ply-level rendering, and stitch-pattern extraction.

0.61

Towards automatic digital garment assembly

cs.CV cs.GR ·2026-10-12 ·Alejandro Rodriguez
similarity 0.53
Abstract · 11 pages, 8 figures

Creating digital garments from existing two-dimensional patterns remains a time-consuming process. Although patterns are widely available in digital form, their assembly in garment CAD software involves manual definition of sewing operations and arrangement of the pattern panels for drape simulation. We present two learning-based approaches that automate both tasks using the 2D vector pattern as their sole input. Our automatic sewing model operates at the segment level, leveraging a Transformer encoder with multiple prediction heads. Our novel architecture supports many-to-many, ordered segment correspondences, as well as hems, overlapping seams needed for multilayer garments, and construction properties such as seam allowances and stitch types, required for the finished virtual garment but neglected by previous methods. A complementary panel-level model predicts body-region assignments, layers, and placement coordinates to initialize the drape simulation. We evaluate both models on a curated dataset of 4,035 professionally assembled garment instances. The sewing model exactly recovers all seam and hem topologies of 63.3\% of test garments, while the arrangement model meets the specified placement criteria for all panels in 66.2\% of test garments. We also integrate both methods into garment CAD software, demonstrating automatic assembly of successfully predicted garments.

0.16

Unweaving the mechanics of woven fabrics through automated model discovery

cs.CE ·2026-10-29 ·Marin Lauber, Uzair Manack, Thibault Vervenne, Rogier P. Krijnen, Benjamin Alheit +2 more
similarity 0.52
Abstract · 11 pages, 6 figures

Woven fabrics have multiple structural, aesthetic, and medical applications that require knowledge of their mechanical properties. While isolated fiber properties are easily determined, bulk properties of woven material, which can be coated or locally reinforced, require knowledge of yarn density, weave style, and other characteristics that are difficult to obtain experimentally. Additionally, fiber rearrangement, twist, yarn contact, and fiber-direction coupling result in non-linear mechanical responses. As a result, there is no universal material model for woven materials, and each fabric requires a specific model and parameter calibration. Recently, methods to simultaneously discover material models and their parameters from experimental or synthetic datasets have been proposed. Here, we use automated model discovery to simultaneously extract the material model and its parameters from biaxial test data of a TPU-coated woven nylon fabric. We show that Constitutive Artificial Neural Networks discover a sparse three-term hyperelastic material law with one isotropic and two anisotropic contributions, reproducing the measured biaxial response with a mean $R^2=0.97$. Across 20 initializations, predictive accuracy remains robust despite variations in the exact sparse representation, consistent with strong correlations between several candidate terms. LARS-LASSO independently recovers the same dominant constitutive contributions at approximately 100-fold lower computational cost. These results are directly applicable to numerical finite-element models of fabric-based structures, including soft robotic devices. More broadly, these results provide a foundation for further model discovery, improved constitutive modeling, and mechanistically informed optimization of woven fabric structures.

0.21

OmniFabric: Coherent UV Space Texture Synthesis for 3D Garment Reconstruction

cs.CV ·2026-09-24 ·Ding-Jiun Huang, Yuanhao Wang, Cheng Zhang, Hugo Bertiche, Alexandru-Eugen Ichim +2 more
top venuecode/data similarity 0.50
Abstract · Accepted to SIGGRAPH Asia 2026. Project Page: https://humansensinglab.github.io/OmniFabric/

Automated generation of production-ready 3D garment assets from a single image is a central challenge in digital content creation. While recent generative models have significantly advanced 3D geometry reconstruction, synthesizing high-quality textures remains a bottleneck. Existing methods often bake environmental illumination and shadows directly into the texture map, or they fail to maintain global structural coherence, making the resulting assets unusable for physical simulation and relighting. In this work, we introduce OmniFabric, a novel approach that synthesizes globally coherent texture maps directly within the 2D sewing pattern space. Given a single reference image, our pipeline utilizes an estimated 3D mesh and generative priors of powerful Vision-Language Models (VLM) to establish a complete but coarse texture initialization across the unwrapped sewing patterns. We then leverage a specialized diffusion transformer, trained via an automated synthetic data engine and conditioned on 3D positional features, to refine this initialization directly in the canonical UV domain. This effectively removes distortion and baked-in artifacts to extract a clean and normalized texture map that preserves the original garment design. Extensive experiments demonstrate that OmniFabric significantly outperforms state-of-the-art baselines, yielding photorealistic 3D garments with high-quality textures.

0.40

Robotic Fabric Alignment System for Sewing Using Global Local Weighted ICP

cs.RO ·2026-08-10 ·Wenbo Dong, Dipankar Bhattacharya Member, Kai Tang, Akinari Kobayashi, Fuyuki Tokuda +3 more
top venue similarity 0.49
Abstract · 16 pages, 10 figures, https://bhattner143.github.io/rfas-glwicp.github.io/

Accurate fabric alignment is a critical step that must be performed before sewing. This paper presents a novel automated fabric alignment system. The system estimates the poses of top and bottom fabric panels, lying flat and wrinkle-free in arbitrary positions, using a new Global Local Weighted Iterative Closest Point (GLW-ICP) method. The system then manipulates the top panel to achieve precise alignment at both edges and sewing lines. Unlike conventional approaches, GLW-ICP robustly aligns both global edges and local sewing lines by globally aligning fabric edge points and locally aligning sewing line points to their corresponding CAD model points, while removing unmatched points in occluded regions. Real-world experiments with various fabric shapes show that the system consistently achieves millimeter-level alignment accuracy under both occlusion and non-occlusion conditions, demonstrating its effectiveness and suitability for automated fabric alignment in practical scenarios.

0.47

MagicGarment: Benchmarking Single-Image Standalone 3D Garment Reconstruction

cs.CV ·2026-10-14 ·Jia Chen, Ruyang Zhao, Jun Bai, Chao Huang, Saishang Zhong +1 more
benchmarkcode/data similarity 0.48
Abstract · 5 pages

Single-image 3D reconstruction has advanced rapidly, yet standalone garments remain challenging due to thin-shell geometry, open boundaries, and layered structures. Existing datasets and evaluation protocols provide limited support for systematic evaluation in this setting. We introduce MagicGarment, a benchmark for single-image standalone 3D garment reconstruction with 1,518 professionally constructed assets across 17 composite garment types, aligned multimodal annotations, and a unified evaluation protocol. We further establish a garment-aware reference baseline by adapting a pretrained image-to-3D backbone at two levels: Grounded Semantic Refinement (GSR) provides garment-focused visual conditioning, while Flow-Time-Route LoRA (FTR-LoRA) adapts the frozen 3D generative backbone using flow-timestep, token-routing, and expert-load information. Experiments demonstrate MagicGarment's benchmark utility and the effectiveness of garment-aware adaptation. Project page: https://1019538157.github.io/MagicGarment/.

0.36

Precise Top-Layer Fabric Segmentation for Fabric Destacking with Edge- and Shape-Aware Deep Networks

cs.CV cs.RO ·2026-08-11 ·Wenbo Dong, Dipankar Bhattacharya, Akinari Kobayashi, Akira Seino, Fuyuki Tokuda +4 more
publishedcode/data similarity 0.48
Abstract · 7 pages, 3 figures. Published in IEEE ICMA 2025. Author's accepted manuscript. Code: https://github.com/bhattner143/top-layer-fab-seg

Fabric destacking requires precise segmentation of the topmost fabric layer, a task complicated by subtle fabric boundaries and high visual similarity between fabric layers. Existing semantic and edge-based segmentation approaches often struggle with these complexities, limiting the performance of robotic manipulation for different tasks. In this work, a novel segmentation training architecture tailored for top-layer fabric segmentation in stacked fabrics is proposed. The method extends the classical encoder-decoder framework by introducing two specialized branches - an edge-aware branch and a shape-aware branch - that are used to supervise the backbone network for better tuning. The edge-aware branch enhances boundary delineation, while the shape-aware branch guides the network to capture and align the overall fabric shape with reference masks derived from Computer Aided Design (CAD) models. Experiments on a real-world fabric dataset demonstrate that the training approach outperforms established baselines, verifying the effectiveness of the multi-branch design through both quantitative results and ablation studies.

0.48