CS Paper Radar

Robotic Fabric Alignment System for Sewing Using Global Local Weighted ICP

Wenbo Dong, Dipankar Bhattacharya Member, Kai Tang, Akinari Kobayashi, Fuyuki Tokuda, Akira Seino, Norman C. Tien, Kazuhiro Kosuge

cs.RO ·submitted 2026-08-10 12:30 UTC · v1
top venue

Abstract

Accurate fabric alignment is a critical step that must be performed before sewing. This paper presents a novel automated fabric alignment system. The system estimates the poses of top and bottom fabric panels, lying flat and wrinkle-free in arbitrary positions, using a new Global Local Weighted Iterative Closest Point (GLW-ICP) method. The system then manipulates the top panel to achieve precise alignment at both edges and sewing lines. Unlike conventional approaches, GLW-ICP robustly aligns both global edges and local sewing lines by globally aligning fabric edge points and locally aligning sewing line points to their corresponding CAD model points, while removing unmatched points in occluded regions. Real-world experiments with various fabric shapes show that the system consistently achieves millimeter-level alignment accuracy under both occlusion and non-occlusion conditions, demonstrating its effectiveness and suitability for automated fabric alignment in practical scenarios.

Comment
16 pages, 10 figures, https://bhattner143.github.io/rfas-glwicp.github.io/
Journal ref
IEEE Transactions on Automation Science and Engineering, vol. 23, pp. 13391-13406, July 2026
DOI
10.1109/TASE.2026.3713128

Closest papers

Nearest neighbours by meaning across the whole index.

Towards automatic digital garment assembly

cs.CV cs.GR ·2026-10-12 ·Alejandro Rodriguez
similarity 0.60
Abstract · 11 pages, 8 figures

Creating digital garments from existing two-dimensional patterns remains a time-consuming process. Although patterns are widely available in digital form, their assembly in garment CAD software involves manual definition of sewing operations and arrangement of the pattern panels for drape simulation. We present two learning-based approaches that automate both tasks using the 2D vector pattern as their sole input. Our automatic sewing model operates at the segment level, leveraging a Transformer encoder with multiple prediction heads. Our novel architecture supports many-to-many, ordered segment correspondences, as well as hems, overlapping seams needed for multilayer garments, and construction properties such as seam allowances and stitch types, required for the finished virtual garment but neglected by previous methods. A complementary panel-level model predicts body-region assignments, layers, and placement coordinates to initialize the drape simulation. We evaluate both models on a curated dataset of 4,035 professionally assembled garment instances. The sewing model exactly recovers all seam and hem topologies of 63.3\% of test garments, while the arrangement model meets the specified placement criteria for all panels in 66.2\% of test garments. We also integrate both methods into garment CAD software, demonstrating automatic assembly of successfully predicted garments.

0.16

ClothAtlas: Joint Garment Identification and State Estimation under Self-Occlusion

cs.CV cs.RO ·2026-10-12 ·Jens Lundell, Alberta Longhini, Lei Shu, Hemal Arora, Evan Robert +4 more
code/data similarity 0.55
Abstract · 9 pages, 6 figures, 2 tables. Project page: https://clothatlas.github.io/

Garment manipulation requires inferring both garment identity and complete configuration from partial, self-occluded observations. This creates a chicken-and-egg problem: completing a partial observation requires a garment-specific deformation prior, while identifying the garment requires a configuration that explains the observation. We introduce ClothAtlas, which jointly identifies garments and estimates their complete configurations from partial point clouds and a library of canonical meshes. A shared graph-conditioned flow-matching model samples configurations for each candidate mesh and ranks candidates by observation fit. The model accommodates different mesh shapes, vertex counts, and connectivities, allowing new garments to be added from canonical meshes alone without retraining. On held-out DexGarmentLab garments, ClothAtlas ranks the correct mesh first among 221 candidates for all 22 test garments from a single flat observation. From a single self-occluded observation, it identifies 15/22 garments, compared with 8/22 for a deterministic graph estimator. Persistent vertex identities support grasp-target localization on real garments, reducing mean error from 15.4 to 6.4 cm overall and from 17.0 to 8.3 cm on occluded targets compared with dense descriptor matching. Project page: https://clothatlas.github.io/

0.42

Yarn tracking of large-scale 3D textile reinforcements using topological material features

cs.CV eess.IVeess.SP ·2026-09-15 ·Hafsa El Herichi, Arturo Mendoza, Yanneck Wielhorski, Hugues Talbot, Stéphane Roux
published similarity 0.54
Abstract

Automated segmentation of CT images has become increasingly important to enhance the reliability of simulations through the generation of high fidelity numerical models. This study addresses the challenging task of semi-automatically tracking textile reinforcements in fan blade dry preforms using X-ray CT images captured at coarse resolutions (i.e., above 140 $μ$m). Our approach offers a scalable, slice-based analysis conducted on planes orthogonal to the main yarn directions, applied to a large-scale real industrial component. This enables accurate identification and tracking of yarn paths while requiring minimal training. The method models three key yarn properties statistically: their typical cross-section shape, their continuity and movement in the 3D space, and their spatial relative arrangement with respect to neighboring yarns. These statistical properties are integrated into a tracking framework via a variational formulation that optimizes all yarn center positions in successive cross-section planes. The method tracks more than 3,000 warp yarns across 1,500 slices and achieves a tracking success rate above 90%. Overall, this work demonstrates a promising approach toward large-scale, automated textile reinforcement annotation, paving the way for more efficient material characterization in complex composite structures.

0.59

RotateIt! Fast and Reliable Single-Arm Garment Unfolding via Online-Adaptive Dynamic Rotation

cs.RO ·2026-09-17 ·Zeqing Zhang, Zuokun Xie, Ao Fang, Bin Dai, Zhengjie Shu +2 more
similarity 0.52
Abstract

Robotic garment unfolding is essential for downstream tasks, yet quasi-static methods require repeated actions, while existing dynamic approaches predominantly rely on bimanual flinging. We present RotateIt!, a single-arm framework that uses adaptive axial rotation for dynamic garment unfolding. To the best of our knowledge, it is the first unfolding framework to employ dynamic axial rotation as its primary manipulation primitive. From a randomly initialized tabletop configuration, the robot selects a rotation-effective grasp and rotates the lifted garment about an approximately fixed anchor, generating inertial tension that separates overlapping layers within a compact workspace. A grasp ranker selects the anchor, while an online residual policy adapts the rotation extent and speed, thereby determining the release timing. Across seen and unseen simulated garments and eight unseen real garments, RotateIt! improves success within three attempts by 44.0-61.0 percentage points over quasi-static pick-and-place. The simulation-trained policies transfer zero-shot to the real world, achieving 75.6% success, 41% higher first-attempt coverage, and 26% higher final coverage. The resulting states further enable autonomous robotic folding without manual rearrangement.

0.25

StitchOver: Technical Embroidery on Seamed Fabrics

cs.HC ·2026-09-08 ·Zekun Chang, Tianhong Catherine Yu, Yixuan Gao, Thijs Roumen
top venue similarity 0.52
Abstract

Smart textiles embed interactivity into everyday garments, supporting use cases like always-available sensing for medical applications or sports. Machine embroidery allows integrating functionalities into existing textiles. However, embroidering onto real-world textile goods remains challenging. Textile goods are rarely made of a single homogeneous substrate of fabric, and embroidery with functional materials such as conductive threads requires machines to be more tightly calibrated than for decorative embroidery. In particular, seams, which bring together different substrates, along with machine variability, cause shifts in tension and friction between the functional thread and the textile substrate that frequently lead to defects (70% of samples in our evaluation). We present a technique to reliably embroider on seamed fabric even when using functional threads. Our software tool automatically digitizes user-defined stitch patterns by introducing what we call "JumpStitches" to bypass seam interference. We evaluated our approach under varying machine states (under-tensioned, well-calibrated, and over-tensioned), and across multiple seam and pattern configurations. Our results show that the JumpStitch mechanism eliminates defects, while maintaining conductivity compared to 70% defects without JumpStitches, and even in poorly calibrated machine states continues to work well.

0.48

Precise Top-Layer Fabric Segmentation for Fabric Destacking with Edge- and Shape-Aware Deep Networks

cs.CV cs.RO ·2026-08-11 ·Wenbo Dong, Dipankar Bhattacharya, Akinari Kobayashi, Akira Seino, Fuyuki Tokuda +4 more
publishedcode/data similarity 0.51
Abstract · 7 pages, 3 figures. Published in IEEE ICMA 2025. Author's accepted manuscript. Code: https://github.com/bhattner143/top-layer-fab-seg

Fabric destacking requires precise segmentation of the topmost fabric layer, a task complicated by subtle fabric boundaries and high visual similarity between fabric layers. Existing semantic and edge-based segmentation approaches often struggle with these complexities, limiting the performance of robotic manipulation for different tasks. In this work, a novel segmentation training architecture tailored for top-layer fabric segmentation in stacked fabrics is proposed. The method extends the classical encoder-decoder framework by introducing two specialized branches - an edge-aware branch and a shape-aware branch - that are used to supervise the backbone network for better tuning. The edge-aware branch enhances boundary delineation, while the shape-aware branch guides the network to capture and align the overall fabric shape with reference masks derived from Computer Aided Design (CAD) models. Experiments on a real-world fabric dataset demonstrate that the training approach outperforms established baselines, verifying the effectiveness of the multi-branch design through both quantitative results and ablation studies.

0.48

Flexible-body Modeling, Kinematic Identification, and Assembly Accuracy of Overconstrained Spatial Linkages

cs.RO math.AG ·2026-09-15 ·Daniel Huczala, Michael Pieber, Johannes Gerstmayr, Andreas Mair, Frederik Schulte +4 more
similarity 0.50
Abstract

Overconstrained rational single-loop linkages are efficient, compact, and low-cost custom mechanisms, yet their deployment in industrial settings is limited. In simulations, rigid body formulations fail due to redundant constraints. This study presents a flexible multibody modeling framework based on the floating frame of reference formulation, and delivers an overall accuracy analysis of assembled linkages prototypes. The approach is validated against 3D-printed PLA prototypes of a Bennett four-bar mechanism, including variants with intentional joint-axis misalignment, which theoretically, from the rigid body point of view, cannot be assembled. A supplementary contribution is delivered in the form of a kinematic parameter identification methodology suited for this type of mechanism with ill-conditioned Jacobian. The experimental and simulation results are compared and reveal that these overconstrained mechanisms exhibit a self-assembling tendency -- structural compliance drives the assembly toward the ideal geometric configuration, distributing constraint stress throughout the structure. Additional qualitative demonstrations using cardboard tubes and bamboo sticks as link building blocks confirm that functional mechanisms can be realized from low-cost, unconventional materials with limited manufacturing accuracy. The proposed modeling pipeline is fully algorithmic and enables design optimization in the future.

0.18

Periodicity and image registration for yarn path extraction in large 3D textiles

eess.SP ·2026-09-29 ·Hafsa El Herichi, Arturo Mendoza, Yanneck Wielhorski, Hugues Talbot, Stéphane Roux
published similarity 0.49
Abstract

Accurate identification of yarns in X-ray computed tomography volumes remains a critical and complex step in generating high-fidelity numerical models of woven composites. This work introduces a tracking framework that leverages the intrinsic periodicity of woven architectures to transform a complex, large-scale segmentation problem into the annotation of a single representative unit cell. The approach first exploits the periodic nature of the weave to extract a representative unit cell from the volumetric data and segment it to provide a reference description of the yarn geometry. Digital Volume Correlation (DVC) is then performed between an idealised periodic volume obtained by replication of the unit cell and the real composite volume, yielding a three-dimensional displacement field that captures geometric deviations from ideal periodicity. The unit-cell yarn segmentation is propagated to the full volume by exploiting the periodicity of the reference volume, and the annotations are transported to the actual volume using the DVC-derived displacement field. Results obtained on real composite datasets demonstrate the ability of the method to accurately recover warp and weft yarn architectures with minimal input, opening new perspectives for efficient and scalable textile composite characterisation.

0.23