CS Paper Radar

RotateIt! Fast and Reliable Single-Arm Garment Unfolding via Online-Adaptive Dynamic Rotation

Zeqing Zhang, Zuokun Xie, Ao Fang, Bin Dai, Zhengjie Shu, Yifeng Tang, Ziwei Wang

cs.RO ·submitted 2026-09-17 07:28 UTC · v1

Abstract

Robotic garment unfolding is essential for downstream tasks, yet quasi-static methods require repeated actions, while existing dynamic approaches predominantly rely on bimanual flinging. We present RotateIt!, a single-arm framework that uses adaptive axial rotation for dynamic garment unfolding. To the best of our knowledge, it is the first unfolding framework to employ dynamic axial rotation as its primary manipulation primitive. From a randomly initialized tabletop configuration, the robot selects a rotation-effective grasp and rotates the lifted garment about an approximately fixed anchor, generating inertial tension that separates overlapping layers within a compact workspace. A grasp ranker selects the anchor, while an online residual policy adapts the rotation extent and speed, thereby determining the release timing. Across seen and unseen simulated garments and eight unseen real garments, RotateIt! improves success within three attempts by 44.0-61.0 percentage points over quasi-static pick-and-place. The simulation-trained policies transfer zero-shot to the real world, achieving 75.6% success, 41% higher first-attempt coverage, and 26% higher final coverage. The resulting states further enable autonomous robotic folding without manual rearrangement.

Closest papers

Nearest neighbours by meaning across the whole index.

FoldBack: Self-Correcting Masked Generative Policy for Long-Horizon Garment Folding

cs.RO cs.AI ·2026-10-07 ·Lipeng Zhuang, Shiyu Fan, Yingdong Ru, Zhuo He, Florent P. Audonnet +2 more
hot direction similarity 0.70
Abstract

We present FoldBack, a self-correcting masked generative policy for long-horizon garment folding. Existing long-trajectory policies may continue after a missed or slipped grasp even when the garment has not reached the intended configuration. We structure FoldBack's recovery mechanisms around three inference-time decisions: when to refine and verify, how to roll back, and where and how to retry. FoldBack aligns refinement and grasp verification with pick-and-place events, returns the robot to a retryable pre-grasp configuration while preserving successful grasps, and selectively regenerates the failed segment and selected future actions while avoiding previous failed grasp locations. To our knowledge, FoldBack is the first editable full-trajectory policy to unify these decisions, enabling failed interactions to be detected, undone, and repaired before execution continues, without recovery demonstrations or base-policy retraining. Across 33 real garments from six categories, FoldBack achieves 75.2% final folding success and 0.837 final-mask IoU, versus 45.7% and 0.689 for the strongest prior baseline.

0.30

RoboFolDeX: A Physical-World Benchmark for Long-Horizon Robotic Manipulation of Deformable Objects

cs.RO ·2026-09-09 ·Chenhuan Liu, Yi Xu, Feng Wu, Hanyang Wang, Wenxiao Kuai +5 more
benchmark similarity 0.69
Abstract

Embodied AI, including vision-language-action and world-action models, must operate reliably in the physical world. Yet methods that perform well in simulation can degrade substantially on real robots, especially in long-horizon deformable-object manipulation, where policies must track changing states and execute reliable multi-stage bimanual interactions. Existing real-robot benchmarks mainly focus on short-horizon rigid-object tasks and offer limited coverage of long-horizon deformable manipulation. We introduce RoboFolDeX, a physical-world benchmark built entirely from real-robot data, with garment folding as its primary task. Since real-robot data collection is costly, RoboFolDeX studies how heterogeneous physical experience can be reused efficiently. The benchmark is organized around four research axes: leveraging human intervention and recovery data collected during deployment; transferring data across tasks, including across garment categories and from rigid to deformable-object manipulation; reusing data across scenes with changes in lighting, background, and layout; and transferring data across robotic embodiments. RoboFolDeX provides 2,000+ hours of real-robot data spanning 20+ tasks and 10+ embodiments. We also establish a fair real-robot evaluation platform for externally submitted policies, with standardized tasks, held-out physical objects, controlled initializations, and a unified execution protocol. The platform is publicly accessible at https://ai.midea.com/#/fold-challenge. We hope RoboFolDeX will serve as a unified testbed for heterogeneous real-robot data reuse and reliable long-horizon deformable manipulation.

0.26

Vision-Based 6-DoF Grasp Pose Estimation for Robot Cloth Unfolding

cs.RO cs.CV ·2026-09-25 ·Domen Tabernik, Peter Nimac, Jan Jerićević, Danijel Skočaj, Andrej Gams
top venue similarity 0.66
Abstract · Published in IEEE Transactions on Cybernetics

Cloth manipulation is a challenging task due to the deformable and high-dimensional nature of cloth, which leads to complex interaction dynamics and perceptual ambiguity arising from frequent occlusions of critical visual cues such as folds, edges, and grasp points. In this work, we tackle cloth unfolding using a regrasping-in-the-air strategy, where one manipulator holds the cloth while the other grasps it at an optimally selected point to unfold it. To this end, we propose CeDiRNet-6DoF, a deep learning framework that jointly predicts effective grasp points and the complete 6-DoF grasp pose from the observed cloth configuration. By integrating dense 3D grasp regression with segmentation and sine-cosine-encoded Euler angles, the proposed method reliably estimates the grasp configuration that maximizes the unfolded cloth area. We extensively evaluated CeDiRNet-6DoF on a bimanual robotic setup within the ICRA 2024 Cloth Competition framework, achieving state-of-the-art performance. An ablation study further validates the benefits of key design components, including joint segmentation, background randomization, and image cropping. These results establish CeDiRNet-6DoF as a robust and versatile foundation for reliable robotic cloth manipulation in unstructured environments.

0.41

ClothDojo: Learned Data Generation and Benchmarking for Bimanual Garment Flattening and Folding

cs.RO ·2026-10-31 ·Zilong Huang, Zipeng Ye, Caicheng Wang, Yuchen Xie, Jiaxiang Luo
code/data similarity 0.66
Abstract · 8 pages, 6 figures, 7 tables. Project page: https://clothdojo.github.io/

Garment flattening and folding require robots to identify garment structure during manipulation and adapt their actions as the cloth deforms. We present ClothDojo, a simulation platform that generates adaptive manipulation trajectories at scale across diverse garments and initial states and evaluates policies in closed loop. ClothDojo encodes each garment's canonical mesh coordinates as an NOCS texture, providing canonical surface-position cues through the visual interface of a pretrained vision-language-action model. We fine-tune the model on human demonstrations and corrections to obtain a data-generation policy. The policy autonomously generates simulated manipulation trajectories, and we retain rollouts that satisfy task-specific success criteria. Each retained trajectory is re-rendered under a randomly sampled appearance to provide RGB observations for downstream policies that do not receive NOCS. Across both tasks, the policy produces nearly 8,000 successful trajectories over hundreds of garments. RGB policies trained on these generated trajectories outperform those trained directly on the original human demonstrations and corrections across all evaluated garment splits and appearance settings. Evaluations across multiple policy models show that overall performance and appearance robustness vary across models and tasks, while generalization to unseen garments remains a common challenge.

0.20

TCAM for Autonomous Deformable Manipulation: The RMC2 Champion System for WBCD 2026 Track 4

cs.RO ·2026-08-11 ·Guangrui Shen, Zhili He, Shigang Wang, Yuanjun Sun, Qing Yu
similarity 0.65
Abstract

This technical report describes the RMC2 Team's champion solution for the WBCD 2026 Track 4: Deformable Manipulation Challenge. The task requires a robot to pick a single T-shirt from a stack, load it onto a printing pallet, align the collar with a target area, and smooth the printing region, a sequence that involves single-layer separation, deformable transport, precise placement, and contact-rich surface adjustment. The competition strongly incentivizes fully autonomous execution, motivating the development of an autonomous solution. We built a fully autonomous system around the TCAM (TermiBrain Causal Action Model) framework, with the design principle that hardware, perception, data, and learning should jointly reduce the physical interaction complexity the policy must handle. A custom 3D-printed gripper designed for single-layer fabric separation improves picking reliability on a dual-arm ARX X5 platform. A wrist-centric four-camera setup pairs upper fisheye cameras for task-level context with lower RGB cameras for close-range gripper-cloth contact observation. We combine portable UMI-style demonstrations with real-robot demonstrations collected on the deployable platform to provide both broad manipulation priors and deployment-specific dynamics. TCAM ties these components into a closed loop: each trajectory is analyzed to identify the physical factors contributing to its outcome, driving targeted data recollection and policy fine-tuning. The policy outputs 30-step end-effector delta-pose action chunks from a multi-view VLA backbone. In the final competition, our system loaded 25 T-shirts at an average of approximately 23 seconds per attempt, with 22 achieving the required surface smoothness, securing first place in Track 4.

0.04

FoldNet++: a Large-Scale Synthetic Dataset for Robotic T-Shirt Folding and Unfolding

cs.RO ·2026-09-11 ·Yuxing Chen, Zhiyuan Wei, Bowen Xiao, Zhizheng Zhang, He Wang
datasetcode/data similarity 0.64
Abstract · CoRL 2026, Project Page: https://pku-epic.github.io/FoldNetXX/

Due to the highly deformable nature of garments, training a generalizable policy for robotic T-shirt folding and unfolding remains a significant challenge. In this work, we present a large-scale synthetic dataset for robotic T-shirt folding and unfolding, covering 6 robotic embodiments, 1K T-shirts, 1K environmental assets, and 120K episodes with rich annotations, which can be used to train a wide range of manipulation policies. We first follow the FoldNet pipeline to generate a large-scale dataset of physically simulatable T-shirts with diverse appearances and annotated semantic keypoints. Based on these semantic keypoints, we then generate manipulation demonstrations for different robotic embodiments through a unified rule-based framework. We use these demonstrations to train visuomotor policies, and experimental results demonstrate that models trained solely on our synthetic data can achieve over 90\% end-to-end task success rates when directly deployed to unseen real-world environments and previously unseen T-shirts from arbitrary initial configurations. Project URL: https://pku-epic.github.io/FoldNetXX/.

0.30

A Simple Gripper Interface for Simulator-Agnostic Cloth Manipulation

cs.RO ·2026-09-24 ·Abhilash Nayak, Franco Coltraro, Maria Alberich-Carramiñana, Carme Torras
publishedhot direction similarity 0.62
Abstract · Accepted for a special session on Hybrid Intelligence at the 23rd International Conference on Informatics in Control, Automation and Robotic…

This paper presents a grasping model for cloth manipulation specifically tailored to ease the deployment of robotic control methods. The model is robust, fast and easy to implement avoiding at the same time contact and friction considerations between the gripper and the cloth in favor of simple positional constraints. The gripper is described by its pose, jaw state, and an attached grasping volume. Two kinds of grasping volumes are considered: an axis-aligned box to simulate a pinch grasping and a square pyramidal volume to simulate point grasping. When the gripper closes, the discrete cloth positions lying inside this volume are selected, stored in the local gripper frame, and then transported with the gripper motion. A simple squeezing step is also included to progressively move the selected cloth positions toward the center of the grasping region, avoiding an instantaneous displacement at closure. The model can be used in any simulator as it only requires access to discrete cloth positions and a mechanism for imposing target positions as constraints. We implement our grasping model in conjunction with a constraint-based inextensible cloth simulator, where grasping is implemented as moving positional equality constraints coupled with stretch, shear, collision, and table contact projection steps. The same gripper trajectory is applied on a robot arm to fold a real piece of cloth, serving as a simple bridge between simulation and physical cloth manipulation and showcasing the realism and practicality of our idealized grasping model.

0.36

Contact-Rich Robotic Manipulation in Construction via Zero-Shot Learning: A Diffusion Policy-Guided Adaptive Control

cs.RO ·2026-08-22 ·Roman Ibrahimov, Salma Mozaffari, Arash Adel
benchmark similarity 0.62
Abstract

Construction robotics and automation offer promising means of improving productivity, alleviating workforce shortages, and reducing workers' exposure to physically demanding tasks. However, reliable contact-rich robotic assembly remains challenging under tight tolerances, fabrication inaccuracies, and uncertain contact dynamics. To address this challenge, we present a framework coupling diffusion policies trained on simulation-generated pose and force/torque data with an L1-inspired adaptive controller that corrects policy-predicted actions online to compensate for unmodeled contact dynamics. We benchmark the framework against baselines in timber joinery, pipe fitting, and sequential full-scale truss assembly. It achieves 100% success on single-task assemblies and 90-100% success across sequential truss assembly subtasks, with lower, more stable contact forces than the baselines. By enabling zero-shot sim-to-real transfer for force-aware contact-rich assembly, the framework reduces costly, labor-intensive real-world data collection for policy training and advances scalable, robust automation of multistage assembly, motivating extension to broader contact-rich manipulation tasks in construction.

0.23