CS Paper Radar

Real2Gym: Building Gyms from Videos, Bringing Skills to Robots

Kerui Ren, Yingxiang Xu, Kaiwen Song, Linning Xu, Bo Dai, Mulin Yu, Tao Lu

cs.CV ·submitted 2026-09-29 09:16 UTC · v1
code/datahighly cited

Abstract

Real-world videos provide rich demonstrations of manipulation, but turning them into reusable robot skills requires visually aligned environments, executable physical interactions, and mechanisms for learning from experience. We introduce Real2Gym, an agentic Real2Sim2Real framework that turns human and robot demonstrations into interactive simulation gyms and brings skills acquired in simulation to physical robots. The Real2Sim module reconstructs editable scenes, aligns objects and cameras with the input, validates demonstrated or retargeted actions through native physics execution, and generates task-conditioned variations with action-feasibility checks. Within these environments, the agent generates executable code for manipulation stages, observes their outcomes, and distills successful attempts and failures into reusable task procedures, object-relative motions, and recovery strategies. Through a shared perception-and-control interface, these skills guide subsequent execution in simulation and on real robots, with motions adapted to current observations and no updates to the underlying model weights. Extensive evaluations demonstrate that Real2Gym enables high-fidelity simulation environment reconstruction, outperforming GPT-6 Astra Direct Mode by 16.7% in success rate with approximately 74.9% fewer policy-execution tokens across these environments, while exceeding it by 33.3% in physical robot execution success rate across four tasks on a real Franka robot.

Comment
Project page: https://real2gym.github.io/

Closest papers

Nearest neighbours by meaning across the whole index.

ARSTAG: An Agentic Real2Sim2Real System for Task-Specific Robot Data Generation

cs.RO ·2026-09-21 ·Bowei Li, Yuner Zhang, Changliu Liu
highly cited similarity 0.80
Abstract · 12 pages, 15 figures and tables. Project webpage: https://boweili666.github.io/ARSTAG/

Adapting visuomotor policies to new manipulation tasks often requires substantial manual engineering or teleoperated data collection. Simulation can provide task-specific data at scale, but constructing the scene, designing expert behavior, and configuring data generation still require significant per-task effort. We present ARSTAG, an agentic Real2Sim2Real system that turns a single RGB image and a natural-language instruction directly into robot policy-learning data. A hierarchy of language agents constructs a task-scoped simulation scene, generates robot-feasible demonstrations, and expands the training distribution through task-consistent randomization, while a coordinator agent manages cross-stage feedback and recovery. Across seven manipulation tasks spanning grasping, placement, and stacking, the ARSTAG-generated demonstrations enable sim-to-real transfer of three visuomotor policy architectures to a dual-arm robot, with pi0.5 achieving an average real-world success rate of 74.6%. Ablations show that task-consistent randomization substantially improves robustness, and policy performance increases with generated dataset size. Project webpage: https://boweili666.github.io/ARSTAG/.

0.53

Gen2Dex: Learning Dexterous Manipulation from Simulation-Initialized Generated Video Demonstrations

cs.RO ·2026-10-17 ·Xiaowen Qiu, Yian Wang, Haoxiang You, Chuang Gan
similarity 0.77
Abstract

Human video demonstrations provide rich manipulation strategies for dexterous manipulation learning. We study a setting in which a fully specified simulated scene is used to generate videos that specify the demonstrated manipulation behavior. This setup provides access to scene information such as object geometry, articulation, and camera parameters, while allowing direct control over task and scene configuration. However, generated videos may contain geometric distortions, inaccurate contacts, and other physical inconsistencies, making the recovered motion difficult to execute directly on a robot. We present an end-to-end framework for converting such simulation-grounded videos into physically executable dexterous robot demonstrations. Our perception pipeline leverages the known scene through model-based object tracking with dense foundation-model features and depth-based hand-object alignment. The recovered human motion is then retargeted and physically grounded using residual reinforcement learning, where a backward curriculum and a cache of physically valid reset states enable the policy to correct imperfect video-derived references while preserving the demonstrated manipulation strategy. On clean ARCTIC demonstrations, our method achieves competitive performance with prior dexterous retargeting approaches and shows greater robustness when applied to references extracted from generated videos. We further demonstrate diverse rigid and articulated manipulation tasks in simulation and successful open-loop transfer of the optimized trajectories to a real dexterous robot.

0.15

ZeroBot: Learning from Scratch in Minutes with Generative Real2Sim

cs.RO cs.CV ·2026-09-27 ·Ivan Kapelyukh, Xiaohan Zhang, Stephen James, Laura Herlant, Edward Johns
top venuecode/datahighly cited similarity 0.76
Abstract · IEEE RA-Letters 2026. Project page: https://zerobot-rl.github.io

We present ZeroBot, a real2sim framework for learning a robot manipulation task from scratch in minutes under challenging conditions: zero human demonstrations, zero policy pre-training, and zero known object models. Given only a single view of an object and a goal pose for that object, ZeroBot uses image-to-3D generative models to obtain a complete object mesh, which is used in simulation for large-scale parallel reinforcement learning. To accelerate training, we introduce an action space which leverages the generated geometry and learned value function to sample states involving robot-object contact. When evaluated on real-world tasks including grasping, pushing, articulated object interaction, and multi-stage manipulation, ZeroBot achieves an 87% success rate with an average training time of 119 seconds. These results show the value of using image-to-3D models in a real2sim framework for rapid, autonomous robot learning.

0.74

A Sim-to-Real Integration Pipeline for Training and Deployment of Chunk-Based VLA Manipulation Policies

cs.RO ·2026-09-18 ·Mathilde Kappel, Clémence Grislain, Mohamed Chetouani, Olivier Sigaud, Louis Annabi +3 more
publishedcode/data similarity 0.76
Abstract · Accepted at IROS 2026 Workshop on Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics

Vision-Language-Action (VLA) models have become a prominent paradigm for mapping multimodal inputs, including semantic instructions, visual observations of the scene, and proprioceptive observations, to robot actions. Most state-of-the-art models predict actions in the end-effector pose space as sequences of action chunks. Training and evaluating these models requires large-scale collections of real-world demonstrations, pairing robot actions with the corresponding visual and proprioceptive observations. Collecting such data on real hardware typically relies on human teleoperation, making the process costly, time-consuming, and difficult to scale. We present an open-source sim-to-real experimental protocol that addresses this bottleneck: expert trajectories generated in simulation are replayed open-loop on a real Franka FR3 setup, where the corresponding real visual and proprioceptive observations are recorded and converted into a format compatible with VLA training. The same deployment stack is then reused, in closed-loop, to evaluate a trained policy on that setup, so that data collection and evaluation share an identical hardware configuration. Because each real recording is paired with the simulated trajectory that produced it, the protocol also yields a direct measurement of the sim-to-real gap. We release the collected datasets on Hugging Face together with the pipeline source code https://gitlab.isir.upmc.fr/kappel/sim2real_public_chunk_control.

0.34

VLaRL: Augmenting Vision-Language-Action Models with Simulation-Trained Latent-Conditioned Residual RL

cs.RO ·2026-09-25 ·Namiko Saito, Kinam Kim, Heecheol Kim, Katsushi Ikeuchi, Yasuyuki Matsushita
similarity 0.75
Abstract

Vision-language-action (VLA) models provide broad, instruction-conditioned manipulation behaviors, but their physical execution can remain imprecise during contact-rich interaction. Residual reinforcement learning (RL) can correct such errors while keeping the VLA frozen, but real-robot RL is costly and safety-critical. We propose VLA Latent-Conditioned RL (VLaRL), which enables residual RL for frozen VLAs to be trained in simulation and deployed on real robots without real-world RL or online adaptation. The key challenge is transferring the learned residual policy despite the visual gap between simulation and reality. Rather than requiring pixel-level visual correspondence, VLaRL uses the VLA's internal vision-language latent representation to condition residual control and as the sim-to-real transfer interface, and learns a lightweight mapper that transforms simulation-derived latents toward the real latent distribution. Across four contact-rich manipulation tasks and two VLA backbones, VLaRL improves real-world success in all task-backbone combinations, while controlled ablations demonstrate the importance of both latent conditioning and latent alignment for transferring simulation-trained residual control.

0.38

Grounded-Dreamer: Robot Learning from World Model Synthetic Data with Physical Grounding

cs.RO ·2026-10-09 ·Feng Jiang, Shu Chen, Yuanfei Wang, Yuan Li, Zhenhao Shen +5 more
code/data similarity 0.75
Abstract · 17 pages, 10 figures, 4 tables. Project page: https://fffstrong.github.io/Grounded-Dreamer/

Scaling robot manipulation policies requires large amounts of diverse, action-labeled data, yet collecting such data in the real world remains expensive and difficult to scale. Existing methods either depend on human teleoperation, rely on simulation with limited visual realism, or use human videos that lack embodiment-specific annotations. In this paper, we introduce Grounded-Dreamer, a framework for synthesizing physically grounded robot manipulation data with video world models while avoiding human teleoperation demonstrations. Grounded-Dreamer combines the visual realism of generative video models with simulator physics engines. Starting from a small set of real images depicting robot task initial states, our method automatically reconstructs task-relevant objects and camera geometry, aligns them in simulation, and collects physically valid trajectories. These trajectories are used to post-train both a video world model and an inverse dynamics model, enabling the generation of visually realistic robot manipulation videos and corresponding robot actions from real images. To filter physically implausible rollouts, Grounded-Dreamer replays generated trajectories in the reconstructed simulation and retains only those that successfully complete the tasks. The real-world robot policies are trained solely on the grounded synthetic trajectories without any human demonstrations. Empirical results in real-world tasks demonstrate that Grounded-Dreamer can synthesize physically grounded data and substantially facilitate policy learning without requiring human teleoperation effort.

0.35

Agentic RSR: Real-to-Sim-to-Real through Scene Reconstruction and Execution-Grounded Robot Policies

cs.RO cs.CV ·2026-10-07 ·Yihan Li, Yating Feng, Shengjiu Sun, Jianing Chen, Hao Ren +5 more
code/datahighly cited similarity 0.75
Abstract · 26 pages. Updated Real-to-Sim experiments and added model evaluations

A simulation of a real robot workspace must preserve task-relevant interactions, while policies developed in it must operate on observations available to the real robot. Yet scene reconstruction and policy development are often treated separately. We present Agentic Real-to-Sim-to-Real (Agentic RSR), a framework that links scene reconstruction, policy development, and real-robot execution through the same manipulation task. Given a workspace video, a task description, and a known robot model, an agent recovers metric scale, iteratively refines the scene using visual feedback, and checks task-relevant interactions in MuJoCo. A coding agent then develops an executable policy, progressing from privileged object poses to visual observations and randomized simulation. The policy can interleave multiple observations and actions within one invocation, while the agent uses execution feedback to continue, retry, or revise its approach. A shared task-level interface carries the policy and accumulated experience to the real robot, where fresh observations and safety checks guide execution. Using Claude Opus 5.5 through DeepSeek Harness (DSH), all 18 scenes across two robots pass the joint visual check; mean four-view Depth MAE against reference depth estimates is 0.0808 m, mean Lab $ΔE_{76}$ is 8.01, and mean grayscale SSIM is 0.7338. In real-robot experiments, the aggregate task success rate reaches 80% of the simulation task success rate, indicating substantial retention of simulated performance on hardware. Code and reconstructed scene data will be made publicly available.

0.61

Zero-HLM: Generalizable Humanoid Loco-Manipulation without Real Robot Data

cs.RO ·2026-10-26 ·Dianyi Yang, Mengya Liu, Zhumei Wang, Yu Liu, Xiaochen Zhang +7 more
code/data similarity 0.75
Abstract

Learning generalizable humanoid loco-manipulation remains bottlenecked by costly real-world demonstrations. Simulation provides a scalable alternative, but requires visually faithful, physics-ready scenes and executable whole-body motions. We present Zero-HLM, a real-to-sim-to-real framework that transforms smartphone captures and simulated source demonstrations into scalable training data for humanoid loco-manipulation. Gaussian-guided agentic real-to-sim reconstruction aligns visual and physical scenes; motion-environment co-adaptation uses rollout feedback to correct whole-body references and interaction geometry. We generate 4,800 physically validated demonstrations for zero-shot transfer across three Unitree G1 tasks. Simulation-trained GR00T N1.7 achieves 66.7% mean full-task success, versus 46.7% with real-data training. On generalized configurations, expanded simulation training raises pooled success from 23% for base-trained real-data policies to 69%, without additional real demonstrations. Project page: https://young-bit.github.io/zero-hlm/

0.19