CS Paper Radar

Bias-Compensated Complex-Valued Bilinear Filtering

Bernhard Plaimer, Andreas Meingassner-Lang, Yannis Kowalewski, Matthias Wagner, Oliver Lang, Mario Huemer

eess.SP ·submitted 2026-09-29 12:24 UTC · v1
unusual

Abstract

Complex-valued optimal and adaptive filters are widely used to identify unknown systems in a broad range of practical applications. Recently, a number of complex-valued bilinear filters, such as the complex-valued bilinear Wiener filter (C-BWF), and the complex-valued bilinear least mean squares (C-BLMS) filter, have been proposed to model and identify complex-valued systems, which are bilinear with respect to their coefficients. However, if the input signals are contaminated with noise, the performance of these complex-valued bilinear filters degrades significantly due to an additional noise-induced bias. To overcome this issue, we propose novel bias-compensated complex-valued bilinear filters that estimate and account for input-noise statistics. Specifically, a bias-compensated C-BWF and a bias-compensated C-BLMS filter are derived in this work. We further include a convergence analysis for the latter. Since practical applications require knowledge of the input-noise variance, we briefly present an adapted method from literature to estimate this quantity. Finally, simulation results demonstrate the superior performance of the proposed filters compared to their standard (non-bias-compensated) counterparts and several state-of-the-art methods.

Comment
20 pages, 10 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Identification of $dq$-Asymmetric Impedances as Complex Transfer Functions Using a Single Arbitrary Excitation

eess.SP eess.SY ·2026-08-30 ·Mohamed Abdalmoaty, Zheran Zeng, Dongsheng Yang, Florian Dörfler
similarity 0.47
Abstract

Cross-coupling between the $dq$ coordinates makes the identification of asymmetric grid impedances a challenging problem, particularly near the fundamental frequency where the asymmetric coupling is strongest. Existing schemes usually handle it either by perturbing the two coordinates sequentially, which lengthens the measurement, or by using a time-domain method with a global parametric model whose order must be tuned. This paper develops a single-shot active non-parametric frequency-domain method that avoids both. The equivalent impedance is parameterized by a pair of single-input single-output complex transfer functions. Each spectral line is fitted with a local rational model; the leakage and transient contributions are estimated, so that neither periodic steady-state excitation nor repeated excitation cycles are required. We give the exact finite-time discrete Fourier transform relation for the conjugate-coupled complex-signal model, and analyse the distortion that a stationary-frame filter placed ahead of the Park transform imposes on the identified pair. The method is validated on a controller hardware-in-the-loop platform against an analytically derived small-signal model, for a symmetric grid and for the same grid with an added grid-following converter that renders it asymmetric. Both complex transfer functions and all four real transfer functions of the $dq$ impedance are recovered over a wide band from a single one-second record of a random excitation, at 1 Hz resolution.

0.26

A Modified Rao-Blackwellised Particle Filter Based on Updated Process Noise Covariance for Chemical Reaction Networks

eess.SY ·2026-09-25 ·Suryasnata Dash, Abhishek Dey
similarity 0.45
Abstract · archived for conference paper

It is necessary to characterize chemical reaction networks (CRNs) accurately to facilitate engineering of both synthetic and naturally occurring biological systems. Estimation of multiple unknown parameters and states in CRNs requires first, an identifiability analysis, and then adoption of a suitable estimation technique. In this paper, we took an example of a reduced order gene expression system, performed parameter sensitivity analysis for multiple unknown parameters, and used a modified Rao-Blackwellised particle filter (RBPF) to estimate parameters and states. The proposed framework estimates parameters using a particle filter and states using an extended Kalman filter (EKF) with process noise covariance updated recursively based on chemical Langevin equation (CLE). We compared the accuracy of parameter estimation, error in state estimation, and whiteness of the innovation sequence for the proposed filter with fixed choices of noise covariance. We found that the RBPF with updated noise covariance finds a balance between these three criteria, demonstrating its suitability for joint state and parameter estimation for stochastic CRNs.

0.21

A Regularized Block Diagonal RLS Algorithm for Acoustic Echo Cancellation

cs.SD eess.AS ·2026-08-21 ·Ruibin Hou, Chenggang Zhang, Yufeng Diao
unusual similarity 0.45
Abstract

While the recursive least square (RLS) algorithm is widely used in adaptive filtering applications like acoustic echo cancellation (AEC) due to its fast convergence rate, its high computational complexity severely limit its practical deployment for long filters. In this paper, a regularized block-diagonal RLS (RBD-RLS) algorithm is proposed to address these challenges. By approximating the inverse covariance matrix as a block-diagonal structure, RBD-RLS simplifies the update process into independent parallel computations of sub-blocks, effectively reducing the computational complexity. Additionally, Tikhonov regularization is applied to each sub-blocks for enhance numerical stability. A series of experimental results demonstrate that RBD-RLS maintains good convergence while significantly reducing computational complexity. Moreover, it still exhibits relative robustness in real-world scenarios.

0.29

Adaptive DOA Estimation With KL-Based Kernel Bandwidth Adaptation Under Impulsive Noise

eess.SP ·2026-10-10 ·Mojtaba Hajiabadi, Saeid Pakravan, Ghosheh Abed Hodtani, Ming Zeng
similarity 0.45
Abstract

Direction-of-arrival (DOA) estimation can degrade markedly in impulsive noise, where methods relying on Gaussian or second-order statistical assumptions are particularly susceptible to large-amplitude outliers. This paper develops an adaptive DOA estimator that employs Gaussian kernel weighting to attenuate the influence of large prediction errors while adjusting the kernel bandwidth online according to a Kullback--Leibler (KL) divergence criterion. A sample-based approximation of the KL criterion yields a recursive bandwidth update that adapts the degree of outlier suppression to the observed error statistics rather than prescribing a fixed bandwidth a priori. The spatial-filter coefficients and kernel bandwidth are updated recursively, and the DOAs are recovered from the resulting spatial spectrum. Mean and mean-square analyses are developed under standard adaptive-filtering approximations to characterize the coefficient convergence and steady-state behavior. Simulation results under Gaussian-mixture impulsive noise demonstrate stable coefficient adaptation and improved DOA estimation accuracy over representative competing methods in several challenging operating regimes, with the most pronounced gains occurring at low-to-moderate signal-to-noise ratios. The results also indicate reduced sensitivity to the initial kernel bandwidth through online bandwidth adaptation.

0.23

ARIA: Anti-diagonal Reduced-cost Index-masked Adaptive BLMS Algorithm

eess.SP ·2026-11-04 ·Mohd Tasleem Khan
similarity 0.45
Abstract

The block least-mean-square (BLMS) algorithm supports high-throughput adaptive filtering but incurs high computational cost as the filter length and block size increase. This letter proposes anti-diagonal reduced-cost index-masked (ARIA) adaptive BLMS, which reduces coefficient-update multiplications through anti-diagonal index masking and tap-wise step-size scaling while keeping the filtering exact. Mean-square error (MSE) analysis establishes an explicit step-size bound, and misadjustment. An extension, ARIA-MF (ARIA with masked filtering), also applies the mask during filtering; its analysis shows that the excess MSE is redistributed across block rows while its block average is approximately preserved. Simulations validate the analysis and shows very good agreement with the estimates

0.28

Fundamental Limits of Adaptive Beamforming Under Finite Training

cs.IT eess.SP ·2026-09-05 ·Zhiyong Cheng, Shengyao Chen, Di Song
theory similarity 0.44
Abstract

Finite training reduces the output signal-to-interference-plus-noise ratio (SINR) of an adaptive beamformer, and a natural question is how much of this loss is unavoidable. This paper determines this question, providing a beamforming counterpart of the Cramér--Rao bound in spectral estimation. An exact identity expresses the SINR loss as a bounded function of the error in the clairvoyant minimum-variance distortionless-response (MVDR) weight. It yields a local asymptotic minimax lower bound over all measurable data-dependent beamforming rules, including biased and irregular rules. The first-order coefficient is $\tr(\Mb\Jb_{\rm eff}^{-1})$, where $\Jb_{\rm eff}$ describes the information in the training data and $\Mb$ measures the sensitivity of the output SINR. Matching constructions determine this coefficient in two complex-Gaussian models. For an $N$-sensor uniform linear array with $K$ distinct point interferers and $2K+1\le N$, a data-driven split one-step beamformer attains the coefficient $C_θ\le K$ at every interior scene of a fixed compact regular parameter set. For unrestricted covariance matrices, sample matrix inversion (SMI) attains the coefficient $N-1$ through the classical Reed--Mallett--Brennan law. The difference quantifies the first-order value of finite-source structure. Geometric formulas and numerical results describe the dependence on interference power and array geometry, and the finite-sample departure near a weak-source boundary.

0.17

ECA-BLS: An Efficient Complex-Augmented Broad Learning System

cs.LG ·2026-08-30 ·A. Rahaman, A. Quadir, M. Sajid, M. Akhtar, M. Tanveer
publishedbenchmark similarity 0.44
Abstract

Broad Learning System (BLS) is an efficient alternative to deep architectures due to its fast training, analytical learning, and strong generalization under limited data. However, existing BLS variants are confined to real-valued representations, restricting their ability to capture nonlinear interactions and second-order statistical dependencies inherent in real-world data. Notably, no prior BLS model fully exploits the complete second-order statistics that naturally emerge when data are embedded in the complex domain. To address this limitation, this paper introduces the first complex augmented Broad Learning System (CA-BLS), which transforms real-valued inputs into phase-encoded complex representations and adopts widely linear modeling to jointly leverage covariance and pseudo-covariance information via complex conjugate augmentation. This enables effective modeling of latent nonlinearities, coherence structures, and second-order dependencies inaccessible to conventional BLS formulations. To mitigate the additional computational cost of complex augmentation, an Efficient Complex Augmented BLS (ECA-BLS) is further developed, reformulating CA-BLS entirely in the real domain while preserving its exact decision function, achieving up to 75\% fewer multiplications and over 60\% fewer additions. A rigorous theoretical analysis proves the mathematical equivalence between CA-BLS and ECA-BLS, ensuring zero theoretical loss. Extensive experiments on 26 benchmark datasets from the UCI and KEEL repositories demonstrate that ECA-BLS consistently outperforms classical BLS and recent state-of-the-art randomized neural networks in accuracy, average rank, and statistical significance, establishing augmented second-order modeling as a critical and previously missing dimension of BLS research.

0.36

A Subsample Time-Delay Estimator with a Farrow Structure

eess.SP ·2026-10-27 ·Hugh L. Kennedy
unusual similarity 0.44
Abstract

A novel solution to the classical problem of subsample time-delay estimation (TDE) for a wideband signal received by two adjacent sensors is described. A mean squared-error (MSE) measure of dissimilarity is defined and evaluated using a variable fractional-delay (VFD) filter bank with a finite impulse response (FIR). Using a filter bank with a Farrow structure allows the MSE power to be expressed as a polynomial function of the filter delay with a local minimum at the unknown signal delay. In Monte-Carlo simulations, the proposed estimator outperforms the generalized cross-correlation (GCC) technique when the signal-to-noise ratio (SNR) is not low (less than 10 dB).

0.30