CS Paper Radar

CRASM-Gate: Deterministic-First Constraint- and Role-Aware Semantic Mapping with Selective Model Assistance Across Heterogeneous Industrial Standards

Kabeh Mohsenzadegan, Vahid Tavakkoli, Kyandoghere Kyamakya

cs.AI ·submitted 2026-09-25 21:28 UTC · v1

Abstract

Industrial standards often encode the same engineering concept through incompatible hierarchies, identifiers, roles, and structural constraints, so the nearest lexical or embedding match can still be technically inadmissible. This article presents CRASM, a deterministic constraint- and role-aware semantic mapping method, and CRASM-Gate, its selectively model-assisted extension. The framework separates standard-specific canonicalization, bounded retrieval, deterministic rules, destination-versus-origin role interpretation, semantic and structural ranking, ambiguity refusal, and target validation. CRASM-Gate adds a confidence/disagreement gate that may invoke a candidate-constrained large language model, while final authority remains with deterministic validation. A controlled artifact covers six directed industrial-standard pairs, three difficulty levels, and ten configurations, yielding 14,400 sample-level decisions. With a fixed local model endpoint, CRASM-Gate reaches mean F1 0.9938 and an implemented structural-validity rate of 1.0000; deterministic CRASM reaches 0.9931 without generative-model calls; and the model-only baseline reaches 0.5347. Relative to the model-only baseline, CRASM reduces top-1 errors from 670 to 10 while exhibiting 0.0688 s/sample rather than 24.5263 s/sample observed latency. CRASM-Gate improves CRASM by one additional correct decision out of 1,440, with observed latency increasing to 15.7666 s/sample. The results support a deterministic-first interoperability architecture in which model assistance is optional, measurable, candidate-bounded, and unable to bypass structural validation.

Closest papers

Nearest neighbours by meaning across the whole index.

From Language-Specific to Cross-DSL: Semantic-Role-Guided Model Completion with LLMs

cs.SE cs.AI ·2026-11-13 ·Meriem Ben Chaaben, Théo Giraudet, Benoit Combemale, Houari Sahraoui
similarity 0.64
Abstract

The rapid emergence of large language models (LLMs), trained on vast and diverse corpora, has positioned them as a promising source of domain knowledge to assist modelers. However, leveraging LLMs for model completion remains challenging: suggestions must respect both the syntax of a domain-specific language (DSL) and the intended domain semantics, while remaining consistent with an evolving model. This paper presents RAFiC, an LLM-based approach for iterative domain model completion that generalizes across DSLs. It drives completion using metamodel information to ensure syntactic validity and enriches prompts with semantic-role annotations to better capture the intended modeling role of DSL elements. The approach provides context-aware, incremental guidance during model construction. We evaluate RAFiC through an ablation-based comparative study over three DSLs and two scenarios per DSL to isolate the contribution of syntactic and semantic guidance. Across these six scenarios, semantic role guidance improves contribution rate in every case, and RAFiC improves completion effectiveness over weaker prompting configurations in most of them. The largest gains occur for DSLs that are less represented in LLM training data. In these cases, iterative guidance leads to earlier and more stable accepted suggestions, while semantic role guidance improves their relevance.

0.18

ReFract: Benchmarking Perspective Awareness in Language Model Agents with Text World Models

cs.AI ·2026-10-02 ·Hainiu Xu, Vítor N. Lourenço, Mohnish Dubey, Yunfei Bai, Yulan He +5 more
benchmark similarity 0.61
Abstract

Large Language Model (LLM) agents are increasingly deployed in high-stakes settings such as industrial maintenance and equipment fault troubleshooting, where workers occupy a variety of roles. A capable agent must therefore act in a way that is calibrated to user's role: taking actions and providing information that respect the role's knowledge and capability boundaries. Unlike coding, where mistakes are usually recoverable, agent responses in these settings are enacted on physical equipment, and can therefore cause irreversible equipment damage, production loss, or personnel harm. Existing benchmarks, however, largely overlook the need for agents to infer what a role intends and acting only through tools that role may legitimately use, a capability which we term Perspective Awareness. To this end, we introduce ReFract, a benchmark of 150 expert-validated entries in which an agent must act differently in response to the same query depending on user's role. Entries of ReFract are grounded in anonymized queries from domain support conversations, against which we construct Text World Models that simulate the agent's operating environments and assemble perspective-aware action trajectories. State-of-the-art LLMs solve at most 69% of the tasks with more than 50% of their trajectories contain attempts of taking perspective-violating actions. ReFract exposes perspective awareness as a distinct, largely unsolved axis of agent evaluation and motivates agents that calibrate not just how to act, but for whom.

0.17

Constraint-Guided Enterprise Data Mapping with Large Language Models

cs.AI cs.CL ·2026-08-25 ·Sebastian Monka, Pramod Anantharam, Thien Vo Minh, Lavdim Halilaj
benchmark similarity 0.61
Abstract · 20th International Conference on Neurosymbolic Learning and Reasoning. NeSy 2026

Enterprise entity alignment must handle semi-structured records, implicit attributes, and unit or granularity mismatches. Manual matching is still common in practice, but does not scale as schemas and providers evolve. LLM-only matching improves semantic recall, yet can violate structural and physical invariants, producing fluent yet operationally invalid correspondences. We propose constraint-guided mapping (CGM), a neuro-symbolic method with three stages: (i) schema-grounded admissibility constraints with metadata mc = <tau_c, delta_c>, where tau_c denotes the constraint type and delta_c provides executable relation and normalization logic; (ii) constraint-restricted candidate generation with cascade relaxation to guarantee a nonempty feasible set under noise; and (iii) neural ranking with bounded LLM disambiguation restricted to that feasible set. Methodologically, constraints operate as hypothesis-space operators rather than post-hoc validators, enabling controlled degradation under relaxation and auditable, human-guidable decisions. On a controlled structural-decoy benchmark, hard admissibility shrinks the candidate space by ~480x without dropping the GT, and a layer-by-layer ablation shows this gate, not the LLM, is the decisive lift (F1 0.08 to 0.66). The benefit is model-independent and adds no extra inference cost: a small model with constraints matches a frontier LLM used without them at ~28x lower cost. The method, not a single tuned configuration, transfers across seven enterprise makes (macro F1 0.70), each under its own automatically discovered, expert-refinable constraints, and lowers expert effort by ~7x versus spreadsheet workflows. Public Valentine results add an external ranking sanity check and mark the boundary: constraints should be hard only where structural invariants are match-determining.

0.20

Debate-to-Skill: Capability-Bound Process Supervision for Industrial Query-to-Agent Annotation

cs.AI ·2026-09-10 ·Shiyu Zhang, Leisheng Cheng, Huifu Li
top venuebenchmark similarity 0.60
Abstract · Accepted at EMNLP 2026

Industrial query-to-agent matching fails when topical relevance is mistaken for executable capability, especially on long-tail and boundary-sensitive requests. We formulate annotation as \emph{capability-bound process supervision} and instantiate it with Debate-to-Skill, which uses reusable decision principles, structured deliberation, verifier-based verdict extraction, and disagreement-driven refinement. On an industrial Query2Agent benchmark, we compare Debate-to-Skill with direct-label supervision, reasoning-SFT, and structural ablations. The results test whether gains come from supervising the capability-critical decision process itself, especially on grey-zone cases where semantic relatedness and executable capability diverge.

0.34

IndustryLLM: Failure-Driven LLM Training for Industrial Procurement

cs.AI cs.CL ·2026-09-25 ·Liang Ding, Zhiang Xu, Yuyang Sheng, Bin Chen, Songlin Bai +11 more
code/data similarity 0.57
Abstract · Technical Report, 56 pages, 6 figures. Model weights and configs available at https://huggingface.co/alibaba-multimodal-industrial-ai/Indust…

Industrial procurement requires language models to bridge informal buyer jargon, sparse marketplace attributes, and authoritative engineering standards under strict safety tolerances. We present IndustryLLM, an open-weight industrial language model trained from Qwen3.5-35B-A3B-Base (35B total parameters with ~3B activated per token, with the vision encoder frozen). Rather than relying on generic text scaling, we introduce a failure-driven adaptation recipe spanning continued pre-training (CPT) and supervised fine-tuning (SFT). CPT leverages a curated ~100B-token corpus integrating 5B tokens of national standards (e.g., GB/T) and technical archives, 10B tokens of de-identified real-world industrial transaction and inquiry records, and 60B tokens of general replay. To overcome register mismatch and factual brittleness, we systematically reconstruct an estimated 20B-token domain subset via multi-register rewriting across 10 genres and 8 writing styles, confidence-routed minimal factual editing, and error-targeted QA synthesis (resolving colloquial typos like '42-luo-mu' -> 42CrMo, expanding ambiguous codes like '16674' -> GB/T 16674, and clarifying conflicting dimensional specs). For downstream deployment, we formalize an evidence-gated constraint-evaluation interface enforcing three-valued logic where unverified product evidence remains unknown rather than satisfied. Offline evaluations demonstrate consistent gains on procurement-query structuring (+2.97 percentage points in exact match, 95% CI [2.11, 3.86] in No-Think mode), while randomized online A/B experiments in production yield substantial improvements (+4.25% GMV, +8.3% satisfied inquiries) alongside a latency reduction from 6-7 s to 1.5 s. Model weights and configs are released at https://huggingface.co/alibaba-multimodal-industrial-ai/IndustryLLM.

0.31

SkillRefine: Cross-Source Skill Induction and Execution Validation for LLM Agents in Refinery Planning Software

cs.CE ·2026-09-25 ·Dongxiao Liu, Boren Zhu, Yuwen Ding, Linghui Li, Lei Li +1 more
benchmark similarity 0.57
Abstract · 8 pages, 4 figures, 2 tables

Operating industrial planning software such as AspenTech PIMS (Process Industry Modeling System) requires an LLM agent to combine structural knowledge, procedural knowledge from expert records, and constraints revealed only during execution. These evidence sources are heterogeneous and individually incomplete: documentation describes tables and interfaces but omits task-level coordination, expert CASE records expose multi-table modification patterns without explicit schema grounding, and execution feedback reveals latent constraints only when a plan is executed. We present \textsc{SkillRefine}, a framework that exploits the Documentation--Practice Gap between documented structure and expert practice to extract candidate coordination patterns, ground them against table definitions and COM specifications, and compile them into progressively disclosed skill packages with provenance. The library is then refined through label-free compliance screening, oracle-based match decomposition over table, row, column, and value dimensions, and signal-conditioned trajectory attribution for localized repair. We evaluate \textsc{SkillRefine} on PIMS-Bench, a benchmark built from two AspenTech PIMS demonstration models, using disjoint construction and held-out test tasks. On the held-out test set, \textsc{SkillRefine} achieves absolute component match F1 gains of 14\%--30\% across four LLM backbones, with the largest gains on complex multi-table coordination tasks.

0.48

IndustrialKnowEval: A Benchmark for Evaluating Multi-Level Industrial Knowledge in LLMs

cs.CL cs.AI ·2026-11-16 ·Haiteng Wang, Haoze Li, Jingwei Guo, Jingbo Zhou, Si Liu +1 more
benchmarkcode/data similarity 0.56
Abstract · 26 pages (13 pages of main text and 13 pages of appendix), 11 figures

Large language models (LLMs) are increasingly explored for industrial tasks, yet few benchmarks evaluate their mastery of industrial knowledge across different types of cognitive demand. We introduce IndustrialKnowEval (IndKnow), a benchmark for industrial knowledge and engineering question answering. It contains 43,282 samples covering 21 task types across seven industrial sectors, including aerospace, electric power, and metallurgy, organized into four levels of cognitive demand: memory, comprehension, reasoning, and engineering application. Enterprise-based domain specialists and experienced researchers participate in all stages of dataset construction and quality control. We conduct a series of experiments on 18 representative LLMs, with domain experts deeply involved in the evaluation. Building upon IndKnow, we propose the Industrial Cognitive Capability Gap (ICCG) metric to characterize the performance differential between foundational industrial knowledge and higher-order reasoning and application, and we analyze it alongside absolute performance to provide a more complete view of model capabilities. We anticipate that IndustrialKnowEval will support the benchmarking of LLMs in industrial scenarios and promote the development of robust industrial intelligence. Code is available at: https://github.com/J4cksonLee/IndKnow

0.52

Controlled Knowledge Engineering for Taxonomy Induction with Tool-Grounded LLM Agents and Runtime-Adaptive Policies

cs.IR cs.AI ·2026-11-10 ·Jonas Limniatis, Bennet Schaarmann, Georg Reuber, Robert Stahlbock
benchmarkcode/data similarity 0.56
Abstract · Submitted to Knowledge-Based Systems. Code: https://github.com/bschaarmann/TIGA

Taxonomies are structured knowledge representations that support semantic search, recommendation, product catalog organization, and retrieval-augmented generation. Their automated construction from a fixed set of candidate entities requires more than plausible text generation: the resulting hierarchy must be complete, structurally valid, and semantically coherent. Large Language Models (LLMs) are promising for this task, but iterative free-form generation remains vulnerable to omitted or hallucinated entities, invalid hierarchical relations, and inconsistent organizational principles. We introduce TIGA (Taxonomy Induction with Tool-Grounded Agents), a knowledge-engineering architecture that formulates taxonomy induction as an iterative decision process over an explicit state and constrained action space. TIGA combines executable taxonomy-editing tools, an memory that records tool calls, rationales, and outcomes, and a runtime-adaptive organizational policy that the agent revises during inference. An optional global reviewer evaluates the constructed taxonomy against the candidate set and the active policy. We evaluate TIGA on four benchmark taxonomies using two LLM backbones and compare it with single-shot and iterative prompting-based baselines. TIGA achieves the strongest structural-quality results in most evaluated configurations, but does not dominate on every precision measure. The gains are accompanied by substantially higher token consumption, API-call volume, and inference time. Ablation results show consistent benefits from the policy and interaction-memory components, whereas the effect of global review depends on the dataset and the available revision budget. These findings characterize tool grounding and runtime policy adaptation as promising but costly mechanisms for improving the controlled construction of structured knowledge representations.

0.25