CS Paper Radar

EndoPrior-GS: Dynamic Endoscopic Reconstruction with a Joint Texture Prior

Jiaqi Huang, Shidong Wang, Tong Xin, Kabita Adhikari

cs.CV ·submitted 2026-09-29 15:49 UTC · v1
publishedbenchmarkcode/data

Abstract

Dynamic endoscopic reconstruction is fundamental to robotic surgery and computer-assisted interventions. While 3D Gaussian Splatting (3DGS) realises real-time rendering, its application to deformable intraoperative environments remains constrained by spurious geometry and varying illuminations. To address these limitations, we introduce EndoPrior-GS, a novel pipeline that explicitly couples frame-extracted vision heuristics and estimated depth maps. EndoPrior-GS derives a joint texture prior from a tool-filtered valid tissue mask, a non-specular photometric filter, and anatomical structural salience, yielding a probability map that guides primitive initialisation and subsequent density control. The prior is further extended to the temporal domain through a texture-aware term that dynamically weighs pairwise primitive contributions during training. We conduct extensive experiments on benchmark datasets EndoNeRF and SCARED, and the obtained results show that our method EndoPrior-GS reduces Flow Error by 27.7% and 25.8% over the representative approaches while preserving competitive rendering quality and real-time rendering speed. Our project website is available at https://jiaqi-huang-77.github.io/EndoPrior-GS/.

Comment
Accepted at ACCV 2026. Code: https://github.com/jiaqi-huang-77/EndoPrior-GS

Closest papers

Nearest neighbours by meaning across the whole index.

Endo-TSR: Temporal Spectral Modeling of Appearance and Motion for Endoscopic Reconstruction

cs.CV cs.RO ·2026-09-26 ·Taoyu Wu, Yiyi Miao, Qi Shao, Zhuoxiao Li, Zhe Tang +2 more
similarity 0.78
Abstract · 5 pages, 3 figures, 2 tables

Endoscopic scene reconstruction requires modeling tissue motion and temporal appearance while recovering fine surface detail. Deformable Gaussian models provide explicit trajectories, but their fixed colour coefficients lack a dedicated temporal representation for photometric changes. We propose Endo-TSR, which augments deformable Gaussian splatting with bounded Fourier colour residuals and independent translation residuals on shared temporal frequencies. The colour residuals capture local appearance changes, while a Matérn spectral prior regularises motion corrections. Multi-scale Laplacian supervision guides tissue-detail recovery during joint image fitting. Extensive experiments on the EndoNeRF and StereoMIS datasets demonstrate state-of-the-art rendering quality, with the highest PSNR across all evaluated sequences. Ablation studies show that temporal appearance yields the largest PSNR gain among the tested component additions, while appearance and detail supervision jointly improve rendering with fixed Gaussian counts.

0.24

iMED: A Multi-Endoscope Dataset for Surgical 3D Perception

cs.CV cs.RO ·2026-11-03 ·Sierra Bonilla, Fengyi Jiang, Chinedu Nwoye, Jingpei Lu, Kailey Reardon +5 more
top venuebenchmarkcode/data similarity 0.73
Abstract · Published at ECCV 2026. 25 pages, including supplementary material. Code and dataset: https://github.com/surgical-vision/imed

We introduce iMED, the first synchronized multi-endoscope dataset for robot-assisted minimally invasive surgery (RAMIS), designed to address a fundamental limitation in surgical vision benchmarking: the absence of independent held-out viewpoints. Existing surgical datasets capture single-trajectory sequences from a single endoscope, making it impossible to distinguish geometric generalization from photometric interpolation along a narrow forward-facing path. iMED provides 340 sequences ~170K synchronized timepoints with 4 views per timepoint) recorded simultaneously from two independent stereo endoscopes across ex vivo, postmortem, and live surgical settings, spanning 14 specimens with diverse anatomical regions and motion regimes. The dataset includes calibrated camera intrinsics, ArUco-based frame-wise pose estimates with uncertainty quantification, instrument segmentation masks, and rich clinical metadata. Using a train-on-one-endoscope, test-on-another evaluation protocol, we benchmark 23 state-of-the-art methods across rigid and deformable novel view synthesis, pose estimation, feature matching, and monocular depth estimation. Our experiments show that methods relying primarily on photometric supervision degrade substantially under this held-out-endoscope setting, while methods with explicit geometric regularization are more robust across views in our benchmark. Notably, large-scale foundation models transfer surprisingly well to surgical imagery, often outperforming domain-specific models, suggesting pitfalls in current fine-tuning protocols. iMED establishes a new evaluation protocol for geometric generalization in surgical vision.

0.70

4D Triangle Splatting Reconstruction of Dynamic Endoscopic Scenes from Monocular Videos

cs.CV cs.RO ·2026-11-01 ·Laura Salort-Benejam, Stamatia Giannarou, Antonio Agudo
similarity 0.71
Abstract · Off-Grid; MICCAIW 2026

Robust 4D reconstruction of deformable endoscopic scenes from monocular videos remains challenging due to non-rigid tissue deformation, illumination changes, occlusions, and unknown camera trajectories. Reliable dynamic reconstruction of endoscopies could significantly enhance visualization, diagnostic accuracy and intraoperative guidance of minimally invasive procedures. We propose SurgicalTS, a self-supervised triangle-splatting framework for dynamic endoscopic scene reconstruction from static monocular cameras. The scene is represented by a canonical set of triangles jointly optimized with a deformation network. We introduce a quaternion-based deformation model, an improved color parametrization, spatio-temporal priors, and a redefined initialization strategy that improves completeness under occlusions. Extensive evaluation on challenging in-vivo endoscopy videos from diverse procedures shows that SurgicalTS successfully models soft-tissue deformations and tool-tissue interactions over time, while consistently outperforming state-of-the-art methods. Our method also reduces training times while maintaining competitive geometric and photometric accuracy results, highlighting the effectiveness of quaternion-based deformation modelling with physical consistency for robust and efficient 4D reconstruction of endoscopic scenes.

0.06

SurgGMF: Fully Causal Gaussian Motion Forecasting for Anticipatory Surgical Scene Rendering

cs.CV ·2026-09-28 ·Jingqian Sun, Yichao Tang
similarity 0.70
Abstract

Dynamic surgical scene modeling is essential for robotic perception, simulation, and decision support. Although existing neural rendering methods enable efficient reconstruction and rendering of deformable surgical scenes, they remain primarily focused on observed-frame reconstruction rather than forecasting future scene states. To this end, we present SurgGMF, a fully causal Gaussian motion forecasting framework for anticipatory surgical scene rendering. Rather than predicting future RGB images directly, SurgGMF forecasts future Gaussian motion states represented by position, scale, and rotation residuals (X/S/R) from historical Gaussian motion fields. To prevent target leakage, we introduce a full-causal-last rendering protocol, where future Gaussian states are rendered without accessing target-frame Gaussian attributes while preserving causal appearance propagation. We evaluate SurgGMF on 12 EndoNeRF and StereoMIS video slices using neural temporal learners and classical dynamics baselines under a unified forecasting protocol. Learned Gaussian motion forecasting consistently outperforms classical dynamics baselines in render space, demonstrating gains beyond hand-crafted state extrapolation. Latency analysis further reveals an accuracy--efficiency trade-off: under the current implementations, TKAN achieves the highest accuracy, whereas GRU and LSTM provide more favorable module-level latency profiles. These results establish SurgGMF as a reproducible framework for causal Gaussian motion forecasting and advance surgical Gaussian representations from retrospective reconstruction toward predictive scene modeling.

0.13

SCOPE-4D: Endoscopic 4D Geometry Foundation Models

cs.CV ·2026-10-01 ·Chaoyi Zhou, Zhongpai Gao, Anwesa Choudhuri, Meng Zheng, Benjamin Planche +4 more
code/data similarity 0.70
Abstract · Project page: https://chaoyizh.github.io/SCOPE-4D-page/

Geometric understanding supports endoscopic navigation and robotic assistance, but learning reliable endoscopic geometry faces two challenges: scarce geometric annotations and ambiguity between camera motion and tissue deformation. We present SCOPE-4D, an endoscopic 4D geometry foundation model that jointly predicts camera parameters, dense geometry, and 3D tissue trajectories from monocular RGB video in a single forward pass. Our curation and annotation pipeline constructs SCOPE-5K, a collection of approximately 5,000 clips spanning real and synthetic gastrointestinal endoscopy and laparoscopy. The collection provides rich geometric supervision and includes newly collected phantom and real-colonoscopy evaluation sets. Geometric supervised fine-tuning on SCOPE-5K learns endoscopic priors that improve camera and depth estimation. Common--Residual Motion (CRM) further constrains local deformation relative to common tissue movement. Together with geometric supervision, CRM and trajectory supervision further improve camera and depth estimation over geometric fine-tuning alone while enabling dense 3D tissue tracking. Evaluations on public and newly collected benchmarks demonstrate strong in-domain and out-of-domain geometry, superior 3D tracking, and more stable long-sequence colon reconstruction. A blinded user study further supports the perceived reconstruction quality on real clinical video. Together, these results demonstrate the value of large-scale endoscopic supervision and motion constraints for joint geometry estimation and tissue tracking.

0.21

DispFlow-GS: Displacement Flow Supervision with Motion Disentangling for Monocular Deformable 3D Gaussian Splatting

cs.CV ·2026-09-29 ·Thai Duy Nguyen, Haitian Zhang, Addison Lin Wang
similarity 0.69
Abstract

Accurate dynamic scene reconstruction is important for robotic perception, where temporally consistent representations of dynamic environments are essential. Deformable 3D Gaussian Splatting (3DGS) models dynamic scenes through deformation fields, and recent methods incorporate motion supervision by aligning rendered Gaussian flow with optical flow. However, we find that such Gaussian-flow-based supervision provides only limited improvements in motion modeling. We identify a fundamental limitation of this supervision paradigm, namely a domain gap between rendered Gaussian flow and optical flow. To address this limitation, we propose a motion supervision framework built on Displacement Flow, which splats per-Gaussian 3D displacements onto the image plane to provide direct and stable optimization signals. We further disentangle scene motion from camera motion via intermediate-view rendering, enabling more reliable motion priors and targeted constraints on deformation and geometry. We also observe a discrepancy between motion fidelity and image-based evaluation, where improved motion awareness does not necessarily translate into better rendered image quality or higher image-based metric scores. Motivated by this mismatch, we introduce Deformation-Rendering Consistency (DRC), a motion-aware metric that measures the alignment between predicted deformation and rendering improvement. Experiments on dynamic scene benchmarks show substantial improvements in motion localization and motion--rendering consistency, reaching up to 39% and 6%, respectively, while image-based metrics change by only about 0.1%. These results confirm the observed mismatch between motion fidelity and image-based evaluation, demonstrating the significance of DRC for motion-aware evaluation.

0.13

EndoS3:Endoscopic Semantic Splatting SLAM

cs.CV ·2026-11-03 ·Mona Sheikh Zeinoddin, Benjamin Wright, Zafer Tandogdu, Greg Shaw, Evangelos Mazomenos +1 more
benchmark similarity 0.66
Abstract

Purpose: Despite advances in 3D surgical scene understanding, semantic simultaneous localisation and mapping (SLAM) remains under-explored for two key reasons. First, it requires solving three challenging tasks in parallel: camera pose tracking, high-fidelity deformable reconstruction, and semantic mapping, making progress particularly demanding. Second, the scarcity of datasets providing the necessary ground truth to evaluate all three tasks comprehensively under conditions that closely reflect real surgical procedures environments. Method: We propose EndoS3, a Gaussian Splatting-based semantic SLAM framework that uses instance masks to guide all three tasks. An instance-level motion decomposition module separates static and dynamic instances by evaluating residual flow after compensating for camera motion, accounting for flow noise and comparing motion across neighbouring instances. The camera is tracked against the static Gaussians, while an instance-aware warp field gives each dynamic instance its own control nodes and deformation network. A semantic node allocation module redistributes a fixed node budget across instances according to their size and non-rigidity. We also introduce CRCD++, an ex-vivo Cholecystectomy dataset with RGB-D frames, camera pose and instance annotations for full semantic SLAM evaluation. Results: EndoS3 surpasses all state-of-the-art general-purpose and surgical semantic SLAM methods in tracking, reconstruction and semantic mapping on the CRCD++ and SemSup datasets. Conclusion: Semantic-aware motion and deformation modelling is vital to surgical semantic SLAM. EndoS3 and CRCD++ offer a method and benchmark for improved geometric and semantic understanding in endoscopy.

0.24

Colon3R: Cross-Domain 3D Reconstruction from Monocular Colonoscopic Video

cs.CV cs.RO ·2026-09-21 ·Zhihao Xing, Yingyu Wang, Liang Zhao, Shoudong Huang
code/data similarity 0.66
Abstract

Monocular colonoscopic 3D reconstruction is important for surgical robotic colonoscopy, but remains challenging due to weak texture, specular reflections, limited view overlap, and non-rigid tissue motion. Conventional multi-view 3D reconstruction methods rely on stable correspondences and approximate rigidity, which are often violated in colonoscopy. Existing endoscopic methods often rely on domain-specific supervision, whereas there are not enough in-vivo labeled data available to adapt geometry foundation models to clinical colonoscopy. We present Colon3R, a cross-domain semi-supervised framework built on pretrained VGGT that transfers coupled camera, depth, and pointmap geometry from labeled phantom and simulated data to unlabeled in-vivo colonoscopy without requiring target-domain geometric annotations. Unlike source-only fine-tuning, which learns only from phantom and simulated data, Colon3R directly exploits unlabeled in-vivo video through teacher-derived cross-view supervision. Our proposed hierarchical quasi-rigid reliability selects reliable supervision at the sequence, directed-pair, and pixel levels, while source-preserving adaptation retains the learned coupled geometry during target-domain adaptation. Extensive experiments demonstrate that our method achieves superior overall performance over state-of-the-art approaches in depth, pointmap, and camera pose estimation. Qualitative comparisons on real in-vivo colonoscopy further show substantially more complete and geometrically consistent reconstructions than competing methods under clinical domain shift. The code is publicly available at https://github.com/vglx/Colon3R.

0.29