CS Paper Radar

Raw Imagery Impacting Your AI: Should You Care?

Adrien Dorise, Marjorie Bellizzi, Stéphane May

eess.IV cs.AIcs.CV ·submitted 2026-09-29 13:15 UTC · v1
published

Abstract

Onboard AI is gaining interest for space applications such as vessel, wildfire, and cloud detection, where real-time processing can improve mission reactivity and reduce downlink needs. However, onboard models may operate on raw or minimally processed imagery rather than on restored ground products. This study evaluates how image degradation affects object detection by varying Signal-to-Noise Ratio (SNR), Modulation Transfer Function (MTF) at Nyquist, and Ground Sampling Distance (GSD). Controlled degradations are applied to Very High Resolution Maxar imagery, and three lightweight detectors, YOLOv5s, YOLOX-S, and NanoDet, are evaluated on the resulting operating points. The results show that the impact of image quality depends on the degradation mechanism, and that increasing degradation does not necessarily lead to a proportional decrease in vessel detection performance. GSD produces the most consistent performance shift, while MTF and SNR effects depend more on the model and resolution. Severe combinations of blur and noise produce the largest losses. These results provide task-level information that can support sensor, processing, and AI trade-offs for future onboard systems.

Comment
Accepted at OBPDC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

AI-Based On-Board Maritime Object Detection for Earth Observation Payload Data Reduction on Versal Embedded Hardware

cs.CV cs.AI ·2026-10-08 ·Thomas Goudemant, Aurélien Bobey, Omar Hlimi, Marjorie Bellizzi
similarity 0.72
Abstract · 8 pages. Accepted at the 10th On-Board Payload Data Compression Workshop (OBPDC 2026), Barcelona, Spain, 12-14 October 2026

Very-high-resolution Earth-observation satellites acquire more data than they can store and downlink, while in maritime surveillance the vessels cover a tiny fraction of each scene. We study onboard vessel detection as a way to select what is downlinked, which reduces the data according to its content rather than coding every pixel; it is complementary to conventional onboard compression. The work follows three axes. (i) Data and algorithm: a controlled dataset is generated from 68 annotated Maxar scenes with 43 vessel classes, and a YOLOX-S detector is trained on it. (ii) Embedded deployment: the detector is quantized and deployed on the DPU of a Versal VC1902, with a limited loss of detection quality and a processing time of a few seconds per scene. (iii) Data reduction: we propose several downlink modes, from metadata only (box, class and score of each detection) to image crops around vessels, tiles holding detections, or the whole scene with a degraded background, and estimate from the measured detection errors the trade-off each offers between the vessels kept and the volume downlinked. On our dense harbor and coastal scenes, tiles keep 98% of the vessels with 29% of the scene volume, and crops 83% with 3%.

0.39

YOLO12-MambaScan: An Efficient Object Detector with High-Frequency Enhancement and State-Space Modeling

cs.CV cs.IR ·2026-09-12 ·Hao Wang
benchmark similarity 0.60
Abstract

The rapid development of unmanned aerial vehicle (UAV) technology has made aerial-image object detection increasingly important for natural-resource monitoring, traffic management, and disaster response. Detecting small objects in aerial images remains difficult because objects occupy very few pixels, high-frequency cues are easily lost, and global context is hard to model in cluttered scenes. Existing detectors often retain insufficient edge, corner, and texture information. We propose \ours, an aerial-image detector built on the YOLO12 architecture. The model combines a triple-path high-frequency enhancement convolution module (TriPathHFConv), receptive-field coordinate-attention convolution (RFCAConv), and a Mamba-based global-context module. On VisDrone, at an input resolution of 960*960, ours achieves 60.0% mAP@50 and 38.6%mAP@50:95, demonstrating a favorable accuracy--efficiency trade-off for small-object detection. The benchmark and dataset protocol follow the VisDrone challenge setup.

0.17

Small Object Detection in Drone Aerial Imagery with LAF-YOLOv10

cs.CV ·2026-09-13 ·Quratulain Nayeem, Fahmina Taranum, Mohammed Mudassir Uddin
benchmarkcode/data similarity 0.60
Abstract

General-purpose object detectors lose accuracy on UAV footage, where targets span only a handful of pixels and onboard compute is limited. Prior work composes independently-validated architectural techniques into one detector, assuming gains reported in isolation transfer once combined. We stress-test that assumption directly. LAF-YOLOv10 integrates four techniques into YOLOv10n: a Partial Convolution C2f (PC-C2f) backbone block, an Attention-Guided Feature Pyramid Network (AG-FPN), a P2 detection head replacing the large-object P5 head, and Wise-IoU v3 regression, asking whether their combined effect matches what each contributes alone. We train LAF-YOLOv10 three times (seeds 42, 123, 256) on VisDrone-DET2019, benchmark against unmodified YOLOv10n, and use TIDE error decomposition, per-category breakdown, per-component ablation, attention/loss comparisons, zero-shot transfer to UAVDT, and held-out/test-dev evaluation to localize where the combination succeeds or fails. Composability does not hold here. LAF-YOLOv10 reaches 24.0+/-0.4% mAP@0.5 at 2.14M parameters, 7.8 points below YOLOv10n (31.8%), a deficit that transfers to UAVDT (-10.0 points) and is confirmed by held-out and test-dev evaluation (23.5%, 22.5%). Background false positives, localization error, and duplicate detections move in the direction AG-FPN and Wise-IoU were designed to push. Ablation traces the deficit to a specific source: the P2/-P5 head swap costs 2.5 points independently plus a 2.5-point interaction penalty when layered onto a backbone weakened by PC-C2f, whose own 2.0-point loss is consistent with a partial pretrained-weight transplant (73/150 backbone tensors transfer). The failure is attributable to a specific interaction, not the four components individually. Composability must be verified directly, not assumed. Code/checkpoints: https://github.com/Mudassiruddin7/Small-Object-Detection-in-UAV-Imagery.

0.37

A Generic On-Board AI Processing Chain for Earth Observation: From Application Development to Embedded Deployment and Mission-Level Orchestration

cs.AI cs.ARcs.DC ·2026-10-19 ·Michel-Fran{\c c}ois Foulon, Liz Ramos Medina, Thomas Goudemant, Clotilde Szywala, Virgile Robles +3 more
similarity 0.58
Abstract

Earth observation satellites acquire more data than they can downlink. Extracting information on board with artificial intelligence (AI) turns the satellite into a data-reduction stage that downlinks compact products, such as masks or detections, instead of full scenes; deploying it in a mission, however, involves the whole processing chain and not only the neural network. We present a generic on-board AI processing chain along three axes, with wildfire segmentation as the worked example among ship detection and cloud segmentation. (i) The AI model is tuned (spectral-band selection, input normalization), quantized to 8-bit integers (int8) and ported to an AMD Versal VCK190, with its excellent segmentation performance preserved on the board. (ii) A modular tiler-inference-mosaicer workflow, reused unchanged across applications, brings the tile-level model to scene level, turning a full acquisition into a scene-level mask or detection list. (iii) Each step is packaged as a unikernel and orchestrated on board by ORCHIDE, a cloud-native orchestrator. The chain is characterized end to end, from the standalone execution on the target to its execution under orchestration with parallel workflows on a representative test bench. Beyond AI inference on individual tiles, this approach aims at increasing the maturity of on-board AI deployment by addressing a complete processing chain, from the acquired scene to the mission-level execution.

0.37

Bridge Damage Detection from Low-Light UAV Imagery via Degradation-Aware Mixture-of-Experts Enhancement

cs.CV ·2026-08-24 ·Hu Wang, Hongxu Pu, Zhiqi Hu, Fangzhou Lin, Wang Wang
similarity 0.58
Abstract · 31 pages, 9 figures

Poor illumination obscures small, low-contrast defects in UAV bridge imagery, reducing the reliability and operational flexibility of automated inspection. This paper investigates whether degradation-aware image restoration can improve bridge damage detection under low-light conditions and transfer from synthetic degradations to real inspection scenes. We propose DaL- MoE, a detector-agnostic restoration front end trained with an ISP-aware low-light synthesis pipeline and equipped with degradation-aware guidance estimation and complementary experts for noise suppression, color adjustment, and structural-detail recovery. On paired synthetic data, DaL-MoE achieves 23.12 dB PSNR and 0.8482 SSIM, increasing YOLOv11m box mAP50 from 0.3097 to 0.4923 and mask mAP50 from 0.2281 to 0.3529. On real low-light UAV imagery without paired normal-light references, sim-to-real evaluation shows improved defect visibility and more complete detections than direct inference on raw low-light inputs. Future work will develop low-light-aware bridge damage detectors with stronger cross-scene generalization across bridge sites, imaging conditions, and illumination levels.

0.23

MultiAltitudeSR: Multi-Altitude Agricultural UAV Image Super-Resolution via Physical Ground Sampling Distance Conditioning

cs.CV ·2026-10-18 ·Xintong Jiang, Yu Tian, Yixue Liu, Valerio Hoyos-Villegas, Viacheslav Adamchuk +1 more
similarity 0.58
Abstract · 27 pages, 12 figures

Unmanned aerial vehicles (UAVs) enable high-throughput platforms for crop monitoring but face a fundamental trade-off between flight altitude and image spatial resolution. Many existing super-resolution (SR) methods for UAV imagery rely on oversimplified synthetic degradation models and are restricted to fixed integer upsampling scales, limiting their ability to handle real-world degradations and varying flight altitudes. This study proposes MultiAltitudeSR, a framework that conditions feature modulation and reconstruction on source and target ground sampling distances (GSDs). MultiAltitudeSR trained jointly on real UAV images at altitudes of 10 to 70 m above ground level supports all 21 source-to-target altitude pairs without pair-specific fine-tuning, covering scale factors ranging from 1.18$\times$ to 6.03$\times$. The framework can be extended to additional source-target GSD combinations by incorporating corresponding image pairs into training. On the 20-to-10 m pair, the model achieved competitive perceptual performance compared with pair-specific baselines, with LPIPS of 0.2236, DISTS of 0.2431, and NIQE of 8.9020. Experiments using the same architecture demonstrated the value of acquiring real-world multi-altitude UAV image pairs for SR training, with real-pair training achieving better average reconstruction performance across the 21 altitude pairs than training with the tested synthetic degradation pipeline. Downstream zero-shot segmentation case studies illustrated task-dependent benefits of super-resolved imagery for crop monitoring, suggesting potential UAV flight-time savings through image acquisition at higher altitudes.

0.25

mbariml: a curation pipeline for turning deep-sea imagery and video into object-detection training data

cs.CV ·2026-09-21 ·Lonny Lundsten, Kevin Barnard, Dave Caress
similarity 0.58
Abstract

Training data quantity and quality greatly affect object detection model performance, regardless of model architecture. For object detection in deep-sea video and imagery, where the objects of interest (primarily organisms) are sparse, faint, and hard to identify, incremental improvements to detector performance may require an iterative approach to data labeling and management. This paper presents mbariml, a Python-based video and image analysis pipeline built around the data labeling and management process. mbariml uses an Ultralytics YOLO detection model, runs it over still images or video, stores every detection as a reviewable region of interest, groups those regions by visual similarity so that a human can accept or reject them in bulk, and exports the result as training data, statistics, image sidecars, and additional metadata. Existing YOLO and Pascal VOC datasets can be imported into the same database, so a legacy training set can be reviewed, extended, and re-exported alongside new detections. The human review stage is the center of the design: an annotator can validate, relabel, resize, delete, and draw entirely new localizations, optionally assisted by the SAM3 segmentation model, and every one of those edits is written back to the same database the detector wrote to. Video receives particular attention: the software treats each tracker-produced track as a provisional observation and selects one representative frame instead of retaining every detection in the track. We describe the pipeline stage by stage, including how each track's representative frame is chosen (from a user-selected third of the track, the middle by default), which we examine on 684 tracks from seafloor video.

0.17

Event-Based Person Detection for Maritime UAV Search

cs.CV ·2026-11-17 ·Zijie Ning, Patrick Vandewalle
published similarity 0.57
Abstract · Accepted at the 5th Workshop on Maritime Computer Vision (MaCVi), WACV 2027

Maritime search and rescue requires locating people in the water quickly, motivating the use of UAVs to survey the search area. During flight, camera motion and the longer exposures used in low light can blur small targets and hinder person detection. Event cameras record brightness changes as they occur, reducing the motion blur associated with longer exposure times. We investigate their use for maritime person detection by generating synthetic events using the v2e event simulator from public MOBDrone rescue videos and retaining the existing annotations. We compare the recurrent vision transformer model RVT-T with YOLOv8n and RT-DETR-R18 trained on exposure-matched images. On 843 test samples from held-out recordings, RVT-T achieves 15.63% person AP50:95, compared with 6.89% for YOLOv8n and 9.44% for RT-DETR-R18 under 100 ms synthetic exposure. Increasing exposure times from 50 to 200 ms progressively reduces frame-based detection accuracy, widening the gap to the event model. To evaluate the feasibility of on-board processing, we deploy our detector on a Jetson Orin Nano platform. The RVT-T model retains its accuracy and requires approximately 136 ms and 2.02 J per sample, allowing real-time processing on the UAV.

0.41