CS Paper Radar

Event-Based Person Detection for Maritime UAV Search

Zijie Ning, Patrick Vandewalle

cs.CV ·submitted 2026-11-17 17:11 UTC · v1
published

Abstract

Maritime search and rescue requires locating people in the water quickly, motivating the use of UAVs to survey the search area. During flight, camera motion and the longer exposures used in low light can blur small targets and hinder person detection. Event cameras record brightness changes as they occur, reducing the motion blur associated with longer exposure times. We investigate their use for maritime person detection by generating synthetic events using the v2e event simulator from public MOBDrone rescue videos and retaining the existing annotations. We compare the recurrent vision transformer model RVT-T with YOLOv8n and RT-DETR-R18 trained on exposure-matched images. On 843 test samples from held-out recordings, RVT-T achieves 15.63% person AP50:95, compared with 6.89% for YOLOv8n and 9.44% for RT-DETR-R18 under 100 ms synthetic exposure. Increasing exposure times from 50 to 200 ms progressively reduces frame-based detection accuracy, widening the gap to the event model. To evaluate the feasibility of on-board processing, we deploy our detector on a Jetson Orin Nano platform. The RVT-T model retains its accuracy and requires approximately 136 ms and 2.02 J per sample, allowing real-time processing on the UAV.

Comment
Accepted at the 5th Workshop on Maritime Computer Vision (MaCVi), WACV 2027

Closest papers

Nearest neighbours by meaning across the whole index.

UnrealEvent: Synthetic Dataset Generation and Annotation for Event-Based Vision

cs.CV ·2026-11-17 ·Yentel Schoovaerts, Zijie Ning, Patrick Vandewalle
published similarity 0.64
Abstract · Accepted at the Workshop on Neuromorphic Vision (NeVi), ECCV 2026

Event-based cameras provide high temporal resolution, low power consumption, and a high dynamic range, but progress in event-based object detection remains constrained by the scarcity of annotated training data. To solve this issue, this paper introduces the tool UnrealEvent, a synthetic dataset-generation pipeline implemented in Unreal Engine 5.5. The pipeline combines a V2E-inspired event-frame generator with EasySynth semantic-rendering passes, allowing rendered level sequences to be converted into paired event representations and YOLO-format bounding-box annotations without manual labeling. Events are generated from per-pixel log-luminance differences between consecutive frames, with contrast thresholds sampled independently from a normal distribution to emulate the fabrication-induced threshold mismatch of real sensors. Using this pipeline, we provide a synthetic dataset and evaluate YOLOv8 detectors under synthetic, zero-shot real, and real fine-tuning training on eTraM. The results show strong in-domain synthetic performance but a substantial synthetic-to-real gap, especially for pedestrians. Fine-tuning on a small real subset improves real-domain performance, while the remaining gap highlights the importance of asset diversity and sensor calibration.

0.37

When Reconstruction Helps Event-Camera Person Triggers

cs.CV ·2026-11-10 ·Yifan Shuai
similarity 0.64
Abstract · 10 pages, 3 figures, ancillary score tables and recomputation script

Event cameras record asynchronous changes in brightness. To use a general visual model as a recording trigger, a system must represent these measurements in a form the model can interpret. We compare direct grayscale accumulation, two temporal encodings, and two intensity reconstructors on paired real event data. On 192 windows from four held-out DSEC recordings, thresholds calibrated only on development data yielded 40 of 52 person detections and 12 of 140 background positives with E2VID. The strongest direct temporal encoding at an admissible fixed cutoff yielded 14 detections and seven background positives. A retrospective comparison at a common 10% background-positive cap yielded 40 detections for E2VID and at most 19 for any direct encoding. FireNet+ had lower preparation cost and produced 21 detections with zero observed background positives at its frozen cutoff. On the same 192 windows, Qwen3-VL-4B yielded 33/52, 2/140 with E2VID and 9/52, 9/140 with the highest-recall direct rendering, the three-bin image (person detections, background positives). A 96-second exploratory replay illustrates the sensitivity of episode capture and recording starts to cutoff selection. The experiments identify a detection benefit from reconstruction under controlled input history and distinguish it from the cost and false starts of continuous triggering.

0.32

Aerial Person Detection under Edge Constraints: Held-Out Evaluation and Edge-Ground Verification

cs.CV cs.RO ·2026-11-15 ·Raghu Venkat, Tricha Anjali
code/datahot direction similarity 0.61
Abstract · 14 pages, 1 figure, 8 tables. Code, truth registers and result files: https://github.com/numberz-ai/aerial-person-detector

A search drone sees a missing person as a few pixels, carries a small computer, and shares a narrow radio link. We study person detection under those limits; the primary evaluations were declared before they ran, and later analyses are marked exploratory. In an exploratory comparison, holding out recording blocks inferred from thermal frame identifiers cut recall at a fixed false-alarm target from 32.7% to 12.3%. With nothing tuned on test blocks, a 46,000-parameter detector gated by a contrast cue finds 10.4% of people against 5.7% for the same network applied everywhere. A standard detector, YOLO11n, trained under the same folds finds 54.5% at a similar false-alarm rate for about eleven times the arithmetic, and on our 4K field footage at 117 m has a walking person among its top 16 detections in up to 92% of frames against 74% for our board. Run alone, YOLO11n's thresholds set at one location overshot their false-alarm target 1.7 to 3.4 times at new locations, and its best configuration at altitude cost 4 to 24 standard passes per frame. Re-scoring its 16 best crops (154 KB per frame) with an 842,000-parameter ground model, thresholds frozen on a validation location, raised recall from 44.9% to 53.7% against the same 16 crops with YOLO's own scores; in a post hoc paired analysis over 15 test locations the gain was +8.8 points [+2.4, +12.5]. Pooled false detections fell from 0.86 to 0.64 per frame, but that paired change was not distinguishable from zero. Coverage of a still person in earth tones was very low for both detectors in the clips we flew.

0.36

Event-based object detection under adverse lighting and motion: lessons for construction sites

cs.CV ·2026-11-15 ·Zhuoran Feng, Xiaoshan Zhou
similarity 0.60
Abstract · 15 pages, 12 figures, 9 tables

Vision-based monitoring on construction sites fails at night, at dawn and dusk, in tunnels and under floodlights, when conventional RGB cameras under- or over-expose. Event cameras record per-pixel brightness changes with microsecond latency and over 120 dB of dynamic range, but their benefit for site-relevant object detection has not been quantified on real data. We compare three recent event-based detectors (SMamba, SATE and EvRT-DETR) with an RGB detector trained on the same data, using the pixel-aligned PEOD dataset. On low-light frames (70% of the test set) the best event detector reaches 27.2 AP against 21.3 AP for RGB, and a training-free late fusion of both sensors is the best option in every lighting condition (33.3 AP). An object-level analysis of 53,091 objects shows that brightness has little effect on event detectors, whereas fast motion matters: above 20 pixels per frame RGB finds 11-19% of medium-size objects and EvRT-DETR 39-60%. Activation patching locates the damage caused by losing events at the 1/16-resolution features, with small objects depending on the finest scale, and shows that event detectors fail when few signal events meet added noise. A model-agnostic pruning study keeps about 95% of accuracy with 60% of the input but halves small-object recall. On rendered construction sites, used zero-shot, dimming the floodlights drops RGB to near zero while the event detector keeps most of its AP50. We close with camera-placement guidance for construction sites.

0.30

The EventCV Library for Event-Based Robotic Vision

cs.RO ·2026-09-18 ·Adam D. Hines, Michael Milford, Tobias Fischer
code/data similarity 0.59
Abstract · 9 pages, 9 figures, 3 tables, under review

Event cameras detect per-pixel brightness changes asynchronously on microsecond timescales, with high dynamic range and low power draw. These are desirable properties for robots that move fast or work in difficult lighting conditions. However, integrating an event camera into a real-world robotic pipeline still requires substantial effort: plug-and-play drivers do not exist, event streams are recorded in a variety of incompatible file formats, and most projects rely on custom research-grade code. Here, we present EventCV, an open-source and extensible Rust library with OpenCV-style Python bindings that lowers the entry barrier to working with event cameras. EventCV provides a wide range of features: denoising filters and geometric transforms, augmentations, corner detection and unsupervised feature learning, contrast-maximization motion estimation, a video-to-events simulator, and Open Neural Network Exchange (ONNX) inference for deployment in robotic stacks. EventCV integrates the Neuromorphic Drivers package, allowing an event camera stream to be processed directly in real time. No existing toolkit covers this range of operations in one package, and EventCV builds representations and decodes files 1.1x to 3.7x faster than the currently available libraries. We deploy EventCV on a Jetson Orin AGX and present three robotics case studies spanning object detection, on-device model inference, and localization. Project webpage: https://eventcv.net.

0.37

YOLO12-MambaScan: An Efficient Object Detector with High-Frequency Enhancement and State-Space Modeling

cs.CV cs.IR ·2026-09-12 ·Hao Wang
benchmark similarity 0.58
Abstract

The rapid development of unmanned aerial vehicle (UAV) technology has made aerial-image object detection increasingly important for natural-resource monitoring, traffic management, and disaster response. Detecting small objects in aerial images remains difficult because objects occupy very few pixels, high-frequency cues are easily lost, and global context is hard to model in cluttered scenes. Existing detectors often retain insufficient edge, corner, and texture information. We propose \ours, an aerial-image detector built on the YOLO12 architecture. The model combines a triple-path high-frequency enhancement convolution module (TriPathHFConv), receptive-field coordinate-attention convolution (RFCAConv), and a Mamba-based global-context module. On VisDrone, at an input resolution of 960*960, ours achieves 60.0% mAP@50 and 38.6%mAP@50:95, demonstrating a favorable accuracy--efficiency trade-off for small-object detection. The benchmark and dataset protocol follow the VisDrone challenge setup.

0.17

TriSAR-3D and PaintFusion: A Novel Trimodal LiDAR-RGB-Thermal Dataset and Method for 3D Person Detection in Search and Rescue

cs.CV cs.RO ·2026-10-15 ·Markus Kramer, Jan Wachenfeld, Oskar von Stryk
code/data similarity 0.58
Abstract

Reliable 3D person detection is important for rescue robotics to give first responders situational awareness. Yet most multimodal 3D detection research targets automotive scenarios in which pedestrians mostly appear in a narrow range of upright, near-road poses. It is therefore unclear how much of the reported performance transfers to rescue settings, as a person may be lying, partially occluded, or in unstructured indoor and outdoor environments. To investigate this gap, we introduce TriSAR-3D, a multimodal person detection dataset recorded with a high-resolution 128-channel LiDAR, an RGB camera, and a thermal camera. It captures varied poses in indoor as well as outdoor locations at different times of day to study their influence on 3D object detector performance. Furthermore, we propose a novel trimodal 3D detection pipeline, PaintFusion, that fuses PointPainting-based evidence using a simple MLP. We show that the derived method reaches 65.4 AP@50 and thereby outperforms strong LiDAR-only (CenterPoint, 53.4), RGB+LiDAR (BEVFusion, 60.5), and adapted trimodal (Tri-BEVFusion, 60.7) baselines on the dataset. At the same time, it is substantially faster than other fusion-based methods such as BEVFusion, with a per-frame latency of 51.6 ms compared to 101 ms. Additionally, we test how the performance of different 3D object detectors generalizes to unseen pose categories. Removing lying instances from training data collapses the lying-pose AP@50 to near zero across all evaluated detectors. The results indicate that dataset diversity exerts a large effect on 3D object detection performance. The dataset and code are available at https://github.com/MarkusKramer1/3D-Trimodal-People-Detection.

0.23

Event Cameras versus Frame Cameras for Synthetic-Aperture Imaging: A Simulation Study

cs.CV ·2026-10-14 ·Jakob Hinterholzer, Mohamed Youssef, Oliver Bimber
similarity 0.57
Abstract

Synthetic-aperture imaging (SAI) removes occluders such as foliage by integrating many views of a scene along a camera path. It has so far been used mainly with frame cameras. We ask whether an event camera has advantages for SAI, and answer the question in simulation, where both sensors see exactly the same scene and the same camera movement. A densely rendered Blender sequence is turned into frames with an EMVA~1288 noise model of an industrial global-shutter camera, and into an event stream with the v2e simulator parameterized like a Sony IMX636. The frames are integrated with the existing airborne optical sectioning renderer. For the events we add a new integration path that projects every single event onto the focal plane at its own interpolated pose, so no events have to be binned into frames. We compare the two sensors in three main runs and an additional dark high-speed test. In a bright scene at 25,m/s the frame camera records only three images on the path and cannot remove the occluder, while the event camera reconstructs the target, even after an event-rate controller drops most of its events to fit the camera link. At the same speed in a 5,lux scene the event camera no longer resolves the target either. In a 5,lux scene at 5,m/s both sensors reconstruct the target at similar quality. We also compare the data one traversal of the aperture costs. At high speed the capped event stream still shows the target at the same data volume as the three frames. At 1,m/s we compare both cameras at two matched data budgets, and there the event camera has no advantage over the frame camera in reconstruction quality. The data rate of the event camera depends on the scene and is highest exactly in the fast bright scenes where it is needed most.

0.26