CS Paper Radar

Event-based object detection under adverse lighting and motion: lessons for construction sites

Zhuoran Feng, Xiaoshan Zhou

cs.CV ·submitted 2026-11-15 03:17 UTC · v1

Abstract

Vision-based monitoring on construction sites fails at night, at dawn and dusk, in tunnels and under floodlights, when conventional RGB cameras under- or over-expose. Event cameras record per-pixel brightness changes with microsecond latency and over 120 dB of dynamic range, but their benefit for site-relevant object detection has not been quantified on real data. We compare three recent event-based detectors (SMamba, SATE and EvRT-DETR) with an RGB detector trained on the same data, using the pixel-aligned PEOD dataset. On low-light frames (70% of the test set) the best event detector reaches 27.2 AP against 21.3 AP for RGB, and a training-free late fusion of both sensors is the best option in every lighting condition (33.3 AP). An object-level analysis of 53,091 objects shows that brightness has little effect on event detectors, whereas fast motion matters: above 20 pixels per frame RGB finds 11-19% of medium-size objects and EvRT-DETR 39-60%. Activation patching locates the damage caused by losing events at the 1/16-resolution features, with small objects depending on the finest scale, and shows that event detectors fail when few signal events meet added noise. A model-agnostic pruning study keeps about 95% of accuracy with 60% of the input but halves small-object recall. On rendered construction sites, used zero-shot, dimming the floodlights drops RGB to near zero while the event detector keeps most of its AP50. We close with camera-placement guidance for construction sites.

Comment
15 pages, 12 figures, 9 tables

Closest papers

Nearest neighbours by meaning across the whole index.

RGB--Event Object Detection Across Operating Frequencies via Reliability-Supervised Routing and Asymmetric-Resolution Fusion

cs.CV ·2026-10-19 ·Peijun Shi, Jiannan Zhao, Xiujin Zhu, Zhenguo Lao, Chee-Onn Chow +1 more
similarity 0.67
Abstract

Autonomous vehicles must detect objects faster than a frame camera delivers images. Event cameras record brightness changes with microsecond resolution, so RGB--event detectors can decide between frames, at an operating frequency, the rate of decisions, far above the frame rate. As this rate rises, each decision receives a sparser event window, and the reliability of the events relative to the frame varies over the scene and over time. Existing detectors weight the sensors per sample and encode the frame at the reduced event resolution. Reliability-supervised routing assigns a fusion weight to every location and supervises it with targets from the losses of two single-modality classifiers used only in training, moving loss-based supervision of fusion weights from whole samples to individual locations. Asymmetric-resolution fusion lets the frame carry the decision where the events fail: it encodes the frame at native resolution and pools every feature level onto the event grid, reusing all pretrained weights. On the DSEC-Det dataset, routing halves the accuracy loss from 20 to 180 Hz, from 6.3 to 3.1 mAP, and lowers it in every seed. The resulting detector, ERA-Det, sets a new state of the art at 63.2 mAP, 3.7 mAP above FlexEvent, leads at every operating frequency, and at 180 Hz is more accurate than FlexEvent at 20 Hz. On two DAVIS346 datasets, the router lowers the frame weight at night and in low light and raises it when the events vanish. ERA-Det upgrades released FlexEvent weights in 5,000 iterations on one GPU.

0.16

SEE Challenge 2026: Event-Guided Brightness Adjustment Across a Broad Illumination Range

cs.CV ·2026-09-24 ·Yunfan Lu, Mingchao Xu, Hanyu Zhou, Shaoyu Liu, Haoyue Liu +7 more
publishedbenchmark similarity 0.65
Abstract · This report has been accepted for publication at an ECCV 2026 Workshop

Event cameras provide a high dynamic range and preserve brightness-change cues in lighting conditions where conventional RGB frames may be noisy or saturated. To benchmark event-guided restoration across a broad illumination range, we organized the SEE Challenge 2026 with the Event-Based Multimodal Vision Workshop at ECCV 2026. The task conditions restoration on one or more RGB frames, synchronized events, and a scalar target-brightness statistic provided by the organizers. It uses SEE-600K, which contains 610,126 image-event observations from 202 real-world scenes spanning low-light, normal-light, and high-light conditions with illumination variations of up to 1,000$\times$. The challenge follows an open-system protocol: participants may use different temporal contexts, architectures, pretrained weights, test-time augmentation, and post-processing strategies. PSNR determines the ranking, and SSIM is reported as a secondary metric. Around 70 teams registered interest and 15 valid CodaBench submissions were received. Six distinct teams completed organizer-side identity and technical verification, provided method descriptions, checkpoints, inference code, and instructions, and are included in the verified open-system ranking reported here. Beyond the ranking, this report analyzes exposure subsets, semantically distinct test cases, a shared failure pattern, system design choices, and inference strategies. The top systems obtain closely spaced average scores, while the best-performing method varies across cases and metrics; under severe underexposure, all verified systems retain visible local errors.

0.20

OLiVES: An Outdoor Low-Light Video Benchmark for Enhancement and Segmentation

cs.CV ·2026-10-14 ·Yini Li, Joanne Lin, David Blackham, David Bull, Nantheera Anantrasirichai
benchmarkdatasetcode/data similarity 0.63
Abstract

Low-light video processing remains an underexplored problem in computer vision, primarily due to the scarcity of high-quality ground-truth data. Existing public datasets exhibit several limitations, including restricted motion diversity, limited scene coverage, weak degradations, reliance on auxiliary modalities such as event data, and misalignment between low-light inputs and ground truth. Furthermore, current datasets typically address either low-light enhancement or scene understanding, whereas these tasks should be considered jointly. We introduce \textbf{OLiVES}, a benchmark dataset for outdoor low-light videos with dynamic scenes, designed to support both low-light video enhancement (LLVE) and video object segmentation (VOS). The dataset addresses key content gaps by incorporating a diverse range of natural textures, animals, occlusions, dynamic activities, and close-up scenes. To the best of our knowledge, OLiVES is the first outdoor low-light video dataset captured using professional cinema-grade cameras. It provides over 25,000 aligned normal- and low-light frame pairs, along with over 46,000 VOS annotations. We benchmark state-of-the-art LLVE and VOS methods on OLiVES and show that training on it improves performance on both tasks. The OLiVES project page is available at: https://anonymous-OLiVES.github.io/.

0.50

When Reconstruction Helps Event-Camera Person Triggers

cs.CV ·2026-11-10 ·Yifan Shuai
similarity 0.63
Abstract · 10 pages, 3 figures, ancillary score tables and recomputation script

Event cameras record asynchronous changes in brightness. To use a general visual model as a recording trigger, a system must represent these measurements in a form the model can interpret. We compare direct grayscale accumulation, two temporal encodings, and two intensity reconstructors on paired real event data. On 192 windows from four held-out DSEC recordings, thresholds calibrated only on development data yielded 40 of 52 person detections and 12 of 140 background positives with E2VID. The strongest direct temporal encoding at an admissible fixed cutoff yielded 14 detections and seven background positives. A retrospective comparison at a common 10% background-positive cap yielded 40 detections for E2VID and at most 19 for any direct encoding. FireNet+ had lower preparation cost and produced 21 detections with zero observed background positives at its frozen cutoff. On the same 192 windows, Qwen3-VL-4B yielded 33/52, 2/140 with E2VID and 9/52, 9/140 with the highest-recall direct rendering, the three-bin image (person detections, background positives). A 96-second exploratory replay illustrates the sensitivity of episode capture and recording starts to cutoff selection. The experiments identify a detection benefit from reconstruction under controlled input history and distinguish it from the cost and false starts of continuous triggering.

0.32

UnrealEvent: Synthetic Dataset Generation and Annotation for Event-Based Vision

cs.CV ·2026-11-17 ·Yentel Schoovaerts, Zijie Ning, Patrick Vandewalle
published similarity 0.62
Abstract · Accepted at the Workshop on Neuromorphic Vision (NeVi), ECCV 2026

Event-based cameras provide high temporal resolution, low power consumption, and a high dynamic range, but progress in event-based object detection remains constrained by the scarcity of annotated training data. To solve this issue, this paper introduces the tool UnrealEvent, a synthetic dataset-generation pipeline implemented in Unreal Engine 5.5. The pipeline combines a V2E-inspired event-frame generator with EasySynth semantic-rendering passes, allowing rendered level sequences to be converted into paired event representations and YOLO-format bounding-box annotations without manual labeling. Events are generated from per-pixel log-luminance differences between consecutive frames, with contrast thresholds sampled independently from a normal distribution to emulate the fabrication-induced threshold mismatch of real sensors. Using this pipeline, we provide a synthetic dataset and evaluate YOLOv8 detectors under synthetic, zero-shot real, and real fine-tuning training on eTraM. The results show strong in-domain synthetic performance but a substantial synthetic-to-real gap, especially for pedestrians. Fine-tuning on a small real subset improves real-domain performance, while the remaining gap highlights the importance of asset diversity and sensor calibration.

0.37

Real-time Unsupervised Object Discovery from Asynchronous Event Streams

cs.CV ·2026-08-27 ·Pratham G. Shenwai, Hemant Kumar Singh, Sridhar Ravi
benchmarkcode/data similarity 0.61
Abstract

Event cameras capture pixel-level intensity changes with microsecond resolution to produce highly sparse asynchronous data streams. For visual perception in latency-critical environments, we propose a lightweight, training-free framework for discovery of moving objects based on spatio-temporal clustering. This framework is driven by two core contributions. First, a linear-time Spatio-temporal Probabilistic Event Filter (SPEF) that introduces an adaptive event acceptance threshold to distinguish salient motion structures from background noise. Second, an Event Morton Code Clustering (EMCC) module that bypasses expensive distance matrix computation to efficiently group events for unsupervised discovery of moving objects. On the E-MLB dataset benchmark, SPEF achieves the best denoising performance among classical filtering methods and remains competitive with learning-based approaches without requiring any offline training. On object discovery, EMCC achieves the highest overall accuracy and lowest execution time across the FRED and eTraM datasets, outperforming established density-based clustering baselines by a substantial margin. Overall, this work establishes a new performance benchmark for classical object discovery in event data, providing a highly scalable, training-free solution for resource-constrained visual perception. The code is available at https://github.com/PrathamShenwai/SPEF_EMCC

0.40

ILLRAW: Illumination-Aware RAW Object Detection

cs.CV ·2026-11-02 ·Xinzhe Wang, Xiao Liang, Xiaoli Zhang, Kang Ma
publishedbenchmark similarity 0.60
Abstract · Accepted to ACCV 2026

Existing RAW-based detectors typically introduce learnable ISP modules to convert RAW inputs into sRGB-like formats to fit off-the-shelf detectors. However, this RAW-to-sRGB paradigm decouples representation learning from the downstream detection task. Crucially, it forces the network to inherit human-centric visual priors while discarding intrinsic RAW advantages, such as linear sensor responses and high-bit-depth, minimally processed scene cues. In this paper, we propose \textbf{ILLRAW}, an \textbf{ILL}umination-aware end-to-end \textbf{RAW} object detection framework. Instead of reconstructing visually plausible sRGB images, ILLRAW directly learns detection-oriented RAW features through a lightweight feature adapter inserted at the input stage of existing detectors. ILLRAW estimates an illumination mask and introduces channel-sensitive embeddings to model Bayer-channel responses. These features are fused by an illumination attention fusion module. Experiments show clear improvements on the diverse AODRaw benchmark and competitive performance on LOD and PascalRAW, with particularly strong results under dark exposure.

0.36

Event Cameras versus Frame Cameras for Synthetic-Aperture Imaging: A Simulation Study

cs.CV ·2026-10-14 ·Jakob Hinterholzer, Mohamed Youssef, Oliver Bimber
similarity 0.60
Abstract

Synthetic-aperture imaging (SAI) removes occluders such as foliage by integrating many views of a scene along a camera path. It has so far been used mainly with frame cameras. We ask whether an event camera has advantages for SAI, and answer the question in simulation, where both sensors see exactly the same scene and the same camera movement. A densely rendered Blender sequence is turned into frames with an EMVA~1288 noise model of an industrial global-shutter camera, and into an event stream with the v2e simulator parameterized like a Sony IMX636. The frames are integrated with the existing airborne optical sectioning renderer. For the events we add a new integration path that projects every single event onto the focal plane at its own interpolated pose, so no events have to be binned into frames. We compare the two sensors in three main runs and an additional dark high-speed test. In a bright scene at 25,m/s the frame camera records only three images on the path and cannot remove the occluder, while the event camera reconstructs the target, even after an event-rate controller drops most of its events to fit the camera link. At the same speed in a 5,lux scene the event camera no longer resolves the target either. In a 5,lux scene at 5,m/s both sensors reconstruct the target at similar quality. We also compare the data one traversal of the aperture costs. At high speed the capped event stream still shows the target at the same data volume as the three frames. At 1,m/s we compare both cameras at two matched data budgets, and there the event camera has no advantage over the frame camera in reconstruction quality. The data rate of the event camera depends on the scene and is highest exactly in the fast bright scenes where it is needed most.

0.26