CS Paper Radar

RGB--Event Object Detection Across Operating Frequencies via Reliability-Supervised Routing and Asymmetric-Resolution Fusion

Peijun Shi, Jiannan Zhao, Xiujin Zhu, Zhenguo Lao, Chee-Onn Chow, Wei Ru Wong

cs.CV ·submitted 2026-10-19 09:51 UTC · v1

Abstract

Autonomous vehicles must detect objects faster than a frame camera delivers images. Event cameras record brightness changes with microsecond resolution, so RGB--event detectors can decide between frames, at an operating frequency, the rate of decisions, far above the frame rate. As this rate rises, each decision receives a sparser event window, and the reliability of the events relative to the frame varies over the scene and over time. Existing detectors weight the sensors per sample and encode the frame at the reduced event resolution. Reliability-supervised routing assigns a fusion weight to every location and supervises it with targets from the losses of two single-modality classifiers used only in training, moving loss-based supervision of fusion weights from whole samples to individual locations. Asymmetric-resolution fusion lets the frame carry the decision where the events fail: it encodes the frame at native resolution and pools every feature level onto the event grid, reusing all pretrained weights. On the DSEC-Det dataset, routing halves the accuracy loss from 20 to 180 Hz, from 6.3 to 3.1 mAP, and lowers it in every seed. The resulting detector, ERA-Det, sets a new state of the art at 63.2 mAP, 3.7 mAP above FlexEvent, leads at every operating frequency, and at 180 Hz is more accurate than FlexEvent at 20 Hz. On two DAVIS346 datasets, the router lowers the frame weight at night and in low light and raises it when the events vanish. ERA-Det upgrades released FlexEvent weights in 5,000 iterations on one GPU.

Closest papers

Nearest neighbours by meaning across the whole index.

Event-based object detection under adverse lighting and motion: lessons for construction sites

cs.CV ·2026-11-15 ·Zhuoran Feng, Xiaoshan Zhou
similarity 0.67
Abstract · 15 pages, 12 figures, 9 tables

Vision-based monitoring on construction sites fails at night, at dawn and dusk, in tunnels and under floodlights, when conventional RGB cameras under- or over-expose. Event cameras record per-pixel brightness changes with microsecond latency and over 120 dB of dynamic range, but their benefit for site-relevant object detection has not been quantified on real data. We compare three recent event-based detectors (SMamba, SATE and EvRT-DETR) with an RGB detector trained on the same data, using the pixel-aligned PEOD dataset. On low-light frames (70% of the test set) the best event detector reaches 27.2 AP against 21.3 AP for RGB, and a training-free late fusion of both sensors is the best option in every lighting condition (33.3 AP). An object-level analysis of 53,091 objects shows that brightness has little effect on event detectors, whereas fast motion matters: above 20 pixels per frame RGB finds 11-19% of medium-size objects and EvRT-DETR 39-60%. Activation patching locates the damage caused by losing events at the 1/16-resolution features, with small objects depending on the finest scale, and shows that event detectors fail when few signal events meet added noise. A model-agnostic pruning study keeps about 95% of accuracy with 60% of the input but halves small-object recall. On rendered construction sites, used zero-shot, dimming the floodlights drops RGB to near zero while the event detector keeps most of its AP50. We close with camera-placement guidance for construction sites.

0.30

TriNetra: Thermal-Reliability-Guided RGB-Thermal Fusion and Tracking for Surveillance

cs.CV ·2026-11-06 ·Sadique Khatib, Aditya Ahirrao, Vedant Sonawane, Disha Kapse, Y. D. Bhise
benchmark similarity 0.66
Abstract

Visible cameras fail at night and thermal sensors fail under saturation, blur or loss of contrast, yet most RGB-thermal (RGB-T) detectors mix the two streams with fixed weights and cannot tell when one modality has become unreliable. TriNetra is a reliability-aware surveillance framework built around this problem. The proposed solution computes a frame-level Thermal Reliability Coefficient (TRC) from five label-free image cues, uses it to gate the thermal features of a dual-branch YOLOv8m detector whose visible branch, neck and head are frozen and COCO-pretrained, and passes the same score to a ByteTrack-based tracker that feeds a rule-based behaviour analyser. On the M3FD benchmark (2,940/630/630 split) the detector reaches 87.6% precision, 79.4% recall, 70.0% mAP@50 and 47.8% mAP@50:95 on the test split, with 17.0 M of its 42.9 M parameters trained. TRC stays near 0.78 on clean frames (standard deviation 0.012), decreases with the severity of thermal saturation and blur, reaching 0.53 and 0.69 at full severity, and is insensitive to RGB-thermal misalignment. With identical weights, the adaptive gate matches a fixed gate on clean data (70.0% versus 69.8% mAP@50) but keeps 43.6% mAP@50 when the thermal stream is corrupted, against 38.4%, 29.2% and 25.0% for a fixed gate, full thermal admission and a closed gate; the 5.1-point gain over the fixed gate has a 95% bootstrap confidence interval of +3.6 to +6.5 points. In tracking, the TRC-gated association performs on par with ByteTrack on a synthetic benchmark with exact ground truth and on 14 M3FD clips, and is slightly less stable under thermal saturation, so its measured benefit is confined to the detector. The limitations of the current evaluation are reported together with the results.

0.23

SARFusion: Scene-Aware Routing Fusion for Robust Camera-LiDAR 3D Object Detection

cs.CV cs.AI ·2026-09-24 ·Yuting Zhao, Ziyi Zheng, Shuxiao Li
similarity 0.65
Abstract

Camera-LiDAR fusion has become a prevailing paradigm for 3D object detection in autonomous driving. However, existing fusion detectors often establish strong inter-modality dependencies by decoding object queries from tightly coupled multimodal representations. Under corrupted driving conditions, such dependencies make the detector vulnerable to unreliable modalities, where degraded observations may interfere with reliable modality-specific evidence and lead to suboptimal predictions. Moreover, modality reliability can vary across both global driving scenes and individual object queries, requiring adaptive fusion decisions at a finer granularity. To bridge this gap, we reformulate robust camera-LiDAR fusion as a scene-aware branch routing problem and propose SARFusion, a robust 3D object detector. Instead of producing detections from a single fused representation, SARFusion decouples object-query decoding into three parallel reasoning branches: a camera branch, a LiDAR branch, and a camera-LiDAR fusion branch. Guided by a Scene Reliability Prior estimated from the global driving context, SARFusion further incorporates object-level evidence to route each query to the most suitable branch. This query-wise routing strategy alleviates harmful cross-modal interference while preserving the benefits of multimodal fusion when complementary cues are trustworthy. On the nuScenes test set, SARFusion achieves strong performance with 72.5 mAP and 74.4 NDS. Extensive analyses demonstrate its robustness under challenging conditions, including sensor corruptions and environmental changes.

0.15

One-Stage Object Detectors in Autonomous Driving

cs.CV cs.AI ·2026-08-19 ·Jonel Roman, Ryan Sirjue, Peter Nguyen, Daniel Krutky, Juan Jesus +1 more
surveybenchmark similarity 0.64
Abstract

Autonomous vehicles depend on fast and reliable perception systems to detect surrounding vehicles, pedestrians, cyclists, traffic signs, and other road objects in real time. This paper presents a comprehensive survey and analysis of one-stage object detectors for autonomous driving rather than an implementation of a new detection system. The survey reviews the evolution of major one-stage detectors, including YOLOv1, SSD, RetinaNet, EfficientDet, anchor-free detectors such as FCOS and CenterNet, and recent real-time models such as YOLOv10. It compares these architectures through their design choices, feature-fusion strategies, loss functions, deployment trade-offs, and reported benchmark performance. The paper also summarizes commonly used autonomous-driving datasets, evaluation metrics, open challenges, and future research directions. Overall, this survey highlights how one-stage detectors balance speed, accuracy, efficiency, and robustness, while also emphasizing the remaining gap between benchmark results and dependable real-world autonomous-driving performance.

0.26

DAPEVO: Deep Adaptive Patch Frame-Event Visual Odometry

cs.CV ·2026-09-25 ·Luca Gandolfi, Simone Nascivera, Roberto Pellerito, Rong Zou, Chiara Plizzari +1 more
similarity 0.64
Abstract

Visual odometry is essential for autonomous navigation in GPS-denied environments, yet RGB-based methods remain vulnerable to motion blur, challenging illumination, and dropped frames. Event cameras complement conventional cameras with high temporal resolution and dynamic range, but their asynchronous measurements complicate reliable correspondence estimation. We present DAPEVO, a learned visual odometry system that estimates image and event correspondences independently at shared patch locations and fuses their correlation evidence before motion refinement. Each tracked patch maintains image and event descriptors, and a learned scalar gate combines modality-specific correlation embeddings for each patch--frame edge before a shared recurrent refinement and bundle-adjustment update. DAPEVO also supports event-only observations, enabling continued tracking when RGB frames are sparse or unavailable, while modality-aware keyframe culling preserves scarce frame constraints. On UZH-FPV, when retaining only one in six RGB frames, DAPEVO's mean absolute trajectory error (ATE) increases by only 36%, from 1.00 to 1.36m, whereas the ATE of DPVO and RAMP-VO rises by factors of $3.7\times$ and $3.1\times$, respectively. On TartanEvent, DAPEVO similarly remains below 1m ATE at 3Hz RGB input, while DPVO and RAMP-VO exceed 9m. Under degraded RGB input on TartanEvent, DAPEVO achieves an ATE of 0.60m, compared with more than 4m for both DPVO and RAMP-VO, while also outperforming event-only DEVO at 0.87m.

0.16

Event-Frame Fusion for Inter-Frame Segmentation via Event-Guided Motion

cs.CV ·2026-09-18 ·Dalia Hareb, Jean Martinet, Benoit Miramond, Elisabetta Chicca
published similarity 0.63
Abstract

Autonomous navigation requires precise and efficient semantic segmentation, yet existing frame-based approaches remain limited by motion blur, glare, latency, and the low temporal resolution (20-30 FPS) of conventional cameras, which leads to information loss between frames. Event cameras have emerged as an alternative sensing modality, capturing intensity changes asynchronously with high temporal resolution, high dynamic range, and sparse outputs. However, event-based algorithms still fall short of frame-based ones in accuracy, as most segmentation methods are designed for dense frame data. To overcome these limitations, we propose a hybrid vision architecture that combines conventional frame-based and event-based cameras. The system integrates two complementary components: (1) a compact Spiking Neural Network (SNN) with 42k parameters for motion estimation, and (2) a lightweight event-driven SNN with 0.84M parameters for frame-based semantic segmentation, which interpolates motion between frames to refine segmentation results. By predicting inter-frame segmentations, the framework achieves segmentation rates of up to 500 Hz with an energy consumption below 1.87 mJ per inference, while maintaining real-time GPU execution at frequencies up to 200 Hz. Additionally, our approach compensates for information loss in frames affected by blur or overexposure, enabling more robust perception in challenging conditions.

0.44

Lossy Event Compression: From Event Stream Distortion to Task Performance

cs.CV eess.IV ·2026-08-28 ·Zahra Rezaee, Catarina Brites, João Ascenso
published similarity 0.63
Abstract

Event cameras generate asynchronous, sparse data streams with microsecond temporal resolution, but in moderate-to-high motion scenes they can produce as many as hundreds of millions of events per second, creating significant bandwidth and storage challenges. Lossy compression is therefore essential for practical deployment, yet existing event stream distortion metrics fail to reliably predict compression-induced degradation at the task level, forcing codec optimization to rely on expensive task-specific evaluations. To address this gap, this paper introduces two fundamentally different event compression pipelines: i) an aggregation-based pipeline that converts the event stream into polarity-based histogram frames for compression with the conventional image codec JPEG 2000, and ii) a frame-free point cloud-based pipeline that codes events natively as 3D points using the octree-based codec G-PCC. Both pipelines are then assessed within a unified task-driven evaluation framework that relates event stream distortion to downstream application performance across four representative tasks: i) video reconstruction, ii) object detection, iii) optical flow estimation, and a delay-sensitive task iv) asynchronous feature tracking under a reference-relative protocol. Building on this framework, five classification-based distortion metrics are applied to event compression for the first time, to the best of the authors' knowledge, and benchmarked against existing event stream metrics. Experimental results demonstrate that the proposed metrics reliably predict compression-induced task degradation across different coding frameworks. This demonstrates that event stream distortion assessment can be an efficient alternative to repeated task-specific evaluation, providing direct guidance for the development and optimization of future event data coding solutions.

0.35

SenseWeather: Multimodal Sensing for Robust Robotic Perception under Extreme Conditions

cs.RO cs.CV ·2026-10-08 ·Fucai Ke, Sukai Huang, Junyi Hao, Kal Backman, Naim Rastgoo +2 more
benchmark similarity 0.62
Abstract

Robotic perception must remain reliable when extreme environmental conditions severely degrade the primary RGB observation. Although robotic platforms commonly carry complementary sensors such as depth and infrared, much of the modern perception stack remains RGB-centric, creating a mismatch between multimodal onboard sensing and pretrained downstream models. We study whether complementary sensing can be used upstream to recover a task-compatible RGB observation that preserves existing perception capabilities without modifying or retraining the downstream stack. To this end, we introduce SenseWeather, a controlled multimodal benchmark for robotic perception under severe rain, snow, dust, fog, and darkness, with registered RGB, depth, and infrared observations, clean references, and grounded high-level perception tasks. We further develop Fusion-to-RGB, with two parameter-efficient sensor-fusion realizations based on token-space fusion for a diffusion transformer and residual latent conditioning for an inpainting UNet. Across frozen open-vocabulary grounding and vision-language models, RGB+D+IR fusion improves all paired downstream comparisons over the corresponding RGB-only restorers, including AP50 gains across all ten detector comparisons. Importantly, these perception gains do not consistently follow conventional image-fidelity metrics, and increasing weather severity does not induce monotonic downstream degradation. These results show that complementary sensing can preserve reusable robotic perception under extreme conditions, while highlighting task-level perception robustness as an objective distinct from visual restoration quality.

0.24