CS Paper Radar

TriNetra: Thermal-Reliability-Guided RGB-Thermal Fusion and Tracking for Surveillance

Sadique Khatib, Aditya Ahirrao, Vedant Sonawane, Disha Kapse, Y. D. Bhise

cs.CV ·submitted 2026-11-06 17:01 UTC · v1
benchmark

Abstract

Visible cameras fail at night and thermal sensors fail under saturation, blur or loss of contrast, yet most RGB-thermal (RGB-T) detectors mix the two streams with fixed weights and cannot tell when one modality has become unreliable. TriNetra is a reliability-aware surveillance framework built around this problem. The proposed solution computes a frame-level Thermal Reliability Coefficient (TRC) from five label-free image cues, uses it to gate the thermal features of a dual-branch YOLOv8m detector whose visible branch, neck and head are frozen and COCO-pretrained, and passes the same score to a ByteTrack-based tracker that feeds a rule-based behaviour analyser. On the M3FD benchmark (2,940/630/630 split) the detector reaches 87.6% precision, 79.4% recall, 70.0% mAP@50 and 47.8% mAP@50:95 on the test split, with 17.0 M of its 42.9 M parameters trained. TRC stays near 0.78 on clean frames (standard deviation 0.012), decreases with the severity of thermal saturation and blur, reaching 0.53 and 0.69 at full severity, and is insensitive to RGB-thermal misalignment. With identical weights, the adaptive gate matches a fixed gate on clean data (70.0% versus 69.8% mAP@50) but keeps 43.6% mAP@50 when the thermal stream is corrupted, against 38.4%, 29.2% and 25.0% for a fixed gate, full thermal admission and a closed gate; the 5.1-point gain over the fixed gate has a 95% bootstrap confidence interval of +3.6 to +6.5 points. In tracking, the TRC-gated association performs on par with ByteTrack on a synthetic benchmark with exact ground truth and on 14 M3FD clips, and is slightly less stable under thermal saturation, so its measured benefit is confined to the detector. The limitations of the current evaluation are reported together with the results.

Closest papers

Nearest neighbours by meaning across the whole index.

RGB--Event Object Detection Across Operating Frequencies via Reliability-Supervised Routing and Asymmetric-Resolution Fusion

cs.CV ·2026-10-19 ·Peijun Shi, Jiannan Zhao, Xiujin Zhu, Zhenguo Lao, Chee-Onn Chow +1 more
similarity 0.66
Abstract

Autonomous vehicles must detect objects faster than a frame camera delivers images. Event cameras record brightness changes with microsecond resolution, so RGB--event detectors can decide between frames, at an operating frequency, the rate of decisions, far above the frame rate. As this rate rises, each decision receives a sparser event window, and the reliability of the events relative to the frame varies over the scene and over time. Existing detectors weight the sensors per sample and encode the frame at the reduced event resolution. Reliability-supervised routing assigns a fusion weight to every location and supervises it with targets from the losses of two single-modality classifiers used only in training, moving loss-based supervision of fusion weights from whole samples to individual locations. Asymmetric-resolution fusion lets the frame carry the decision where the events fail: it encodes the frame at native resolution and pools every feature level onto the event grid, reusing all pretrained weights. On the DSEC-Det dataset, routing halves the accuracy loss from 20 to 180 Hz, from 6.3 to 3.1 mAP, and lowers it in every seed. The resulting detector, ERA-Det, sets a new state of the art at 63.2 mAP, 3.7 mAP above FlexEvent, leads at every operating frequency, and at 180 Hz is more accurate than FlexEvent at 20 Hz. On two DAVIS346 datasets, the router lowers the frame weight at night and in low light and raises it when the events vanish. ERA-Det upgrades released FlexEvent weights in 5,000 iterations on one GPU.

0.16

Towards Privacy-Preserving Thermal Human Perception from Dataset to Deployment

cs.CV eess.SP ·2026-10-10 ·Kailai Sun, Yue Cui, Xinwei Wang, Zijie Gao, Baoshen Guo +6 more
code/datahot direction similarity 0.65
Abstract

Indoor human perception is the foundation for smart homes and healthcare. However, RGB cameras raise privacy concerns in private indoor environments, while low-resolution thermal cameras provide limited spatial and semantic information. Large-scale indoor thermal datasets and real-world deployments remain limited. Here, we introduce Indoor RGB-T, a large-scale paired RGB--thermal dataset for indoor human perception. The dataset covers 20 indoor rooms and contains 90,576 80x62 thermal frames, 87,016 temporally matched RGB--thermal pairs, and 115,557 annotated human bounding boxes. We establish benchmarks for robust thermal occupant-state detection with 0.75 mAP and occupancy estimation with an accuracy of 0.847 in unseen rooms. We further evaluate RGB-to-thermal and thermal-to-RGB translation, achieving a temperature MAE of 0.654 C and an R2 of 0.923. Finally, we deploy the thermal perception model on a commercial sleep-monitoring system in the real world. Field testing with 100 participants and deployment of approximately 1,000 devices further demonstrate its practical feasibility. We identify practical challenges that motivate future research directions, including environmental thermal interference, sensing range and multi-person occlusion. The code, trained models and partial dataset are available at https://github.com/kailaisun/RGBT and https://huggingface.co/skl24/RGBT.

0.41

What Limits Thermal Infrared Drone Detection? A Cross-Dataset Benchmark Analysis

cs.CV ·2026-11-12 ·Tamara R. Lenhard, Jan Kels, Tobias Koch
publishedbenchmark similarity 0.62
Abstract · Accepted at 2027 IEEE/CVF Winter Conference on Applications of Computer Vision Workshops (WACVW), Workshop "Real World Surveillance: Applica…

Thermal infrared (IR) imaging enables drone detection with reduced dependence on ambient illumination, supporting continuous surveillance beyond the limitations of visible-spectrum sensing. However, substantial and often undocumented variability in camera systems, processing pipelines, and annotation practices across public IR drone datasets complicates the assessment of detector performance and cross-domain generalization. To examine these sources of variability and their implications for drone detection, we systematically characterize existing IR datasets and establish an artifact taxonomy reflecting their origins across the acquisition and processing pipeline, encompassing optical and sensor effects, tone mapping and image enhancement, and recording-related artifacts. Focusing on long-wave IR data, we investigate the impact of training data composition and model characteristics on YOLO-based detection performance, generalization, and condition-dependent failure modes. Our results demonstrate that detection performance is governed more strongly by training data composition than by YOLO generation or model capacity, while cross-dataset generalization exhibits pronounced asymmetries. Even the best-performing configuration fails to detect over 40\% of drones, with elevated miss rates for very small targets, cluttered urban backgrounds, and thermal crossover, highlighting the shortcomings of existing datasets.

0.26

Synthetic Thermal Image Generation for Real-Time Animal Detection Under Low-Visibility Conditions

cs.CV ·2026-09-26 ·James Momoh, Khandaker Mamun Ahmed
published similarity 0.62
Abstract · Accepted at The IEEE Cyber Awareness Research Symposium (CARS), 2026

Wildlife-vehicle collisions remain a significant road safety concern, particularly during nighttime and low-visibility conditions when RGB-based perception systems are often unreliable. Thermal imaging offers a promising alternative for detecting animals under poor illumination. However, the limited availability of annotated infrared animal datasets restricts the development of robust deep learning-based detection models. This paper investigates synthetic thermal image generation as a scalable approach for real-time animal detection under low-visibility conditions. A subset of 514 annotated visible-spectrum animal images from the NTLNP dataset is translated into synthetic thermal representations using CycleGAN-Turbo, while a limited real thermal dataset of 60 images is expanded through thermal-focused augmentation. Multiple object detection architectures, including YOLOv8, YOLOv9, YOLOv10, and RT-DETR, are trained independently on synthetic and real thermal datasets and evaluated using precision, recall, mAP@0.5, mAP@0.5:0.95, model size, and inference latency. Experimental results show that synthetic thermal images provide competitive detection performance, with RT-DETR achieving the highest synthetic-data mAP@0.5 of 0.9613. Models trained on augmented real thermal data achieve the strongest overall performance, with YOLOv10s obtaining 0.9879 mAP@0.5 and 0.9571 mAP@0.5:0.95. Computational analysis further indicates that lightweight YOLO variants provide favorable inference latency, supporting their potential for real-time deployment. These findings demonstrate that synthetic thermal imagery can reduce dependence on scarce infrared datasets and support the development of efficient animal detection systems for future vehicle-mounted wildlife collision mitigation applications.

0.25

Shifting Focus by Reliability: Geometric Fusion Modulation for Robust RGB-T Detection

cs.CV cs.LG ·2026-10-30 ·Liuyin Shi, Chengqi Li, Wenbo He
published similarity 0.62
Abstract · Accepted to WACV 2027

RGB-thermal (RGB-T) object detectors combine visible and thermal imagery for robust detection, but signal corruption in either stream can substantially degrade accuracy. Restoration-based methods incur significant latency and do not consistently improve downstream accuracy, raising a more direct question: rather than restoring corrupted inputs, can we efficiently adapt the detector to their varying signal quality? Conventional PEFT offers an efficient route, but its input-independent corrections cannot track diverse test-time corruptions. Our controlled corruption sweeps show that corruption types have similar effects near clean conditions but diverge increasingly with severity, motivating corruption-aware, per-input adaptation. We therefore propose PG-FM (Prompt-Guided Feature Modulation), which adapts RGB-T object detectors to the estimated corruption type and severity of each modality. Under controlled RGB-T corruption simulations, PG-FM preserves clean-set performance, improves mAP50 by up to 20.8 points on FLIR and 19.9 points on KAIST, and transfers without retraining to unmodified, naturally acquired external RGB-T datasets.

0.42

Reliability-Consistent Appearance Modeling for RGB-Infrared Multi-Object Tracking

cs.CV ·2026-10-16 ·Bingyang Wang, Jiazuo Yu, Lu Zhang, Lihe Zhang, Huchuan Lu +1 more
similarity 0.61
Abstract · 10 pages, 6 figures. Submitted to IEEE Transactions on Multimedia

Recent RGB-infrared multi-object tracking (MOT) methods have substantially improved cross-modal representation learning and multimodal information integration. However, most existing methods compress RGB and infrared evidence into a unified descriptor. When one modality is temporarily degraded, the tracker can no longer regulate its contribution separately; unreliable evidence may distort association and contaminate appearance memory. We therefore propose RCA-MOT, a reliability-consistent appearance modeling framework that preserves cross-modal complementarity while retaining post-representation evidence controllability. RGB-specific, infrared-specific, and fused identity representations are maintained as jointly accessible appearance states. For each detection, a simple training-free target-scene estimator produces branch-wise appearance reliability used across the two temporal roles of appearance: relative reliability regulates different identity branches, absolute reliability calibrates borderline candidates near the ReID acceptance boundary, and the same branch-wise reliability controls how strongly matched descriptors update historical appearance memory. The individual components are intentionally simple, focusing evaluation on reliability-controllable appearance organization rather than elaborate fusion or learned reliability-estimation modules. RCA-MOT sets new SOTA results on VT-MOT and UniRTL, improving the previous best HOTA by 5.402/6.075 points and IDF1 by 11.549/12.789 points, respectively, while post-hoc analyses further validate reliability as an informative control signal. Code will be released upon acceptance.

0.23

End-to-End Self-Supervised RGB-T Tracking without Modality Misleading

cs.CV ·2026-09-29 ·Shenglan Li, Rui Yao, Kunyang Sun, Hong Jia, Yong Zhou +2 more
code/data similarity 0.61
Abstract

RGB-T object tracking leverages the complementary characteristics of visible and thermal infrared modalities to improve robustness under adverse conditions. Existing supervised methods typically rely on costly modality-aligned bounding box annotations, while most self-supervised approaches follow a two-stage pseudo-labeling paradigm, making tracker training sensitive to pseudo-label quality and preventing joint end-to-end optimization. In this paper, we propose ESMTrack, a fully end-to-end self-supervised RGB-T tracking framework without offline pseudo-label generation or dense frame-level bounding box annotations. Given only the standard initial-frame annotation used in visual tracking, ESMTrack learns discriminative and temporally consistent representations through two complementary objectives: a grounding triplet loss on annotated initial frames and a cross-frame temporal triplet loss on unlabeled search frames, with reliable samples selected by forward-backward consistency. To address modality dominance bias, ESMTrack employs a three-branch architecture consisting of a fusion branch and two unimodal branches for RGB and thermal inputs. We quantify modality contributions using the Average Peak-to-Correlation Energy by measuring response discrepancies between the fusion and unimodal branches. The resulting reliability estimates guide a training-time modality decoupling mechanism that suppresses dominant-modality shortcuts and adaptively weights cross-modal contrastive learning for task-level alignment. Extensive experiments on five RGB-T tracking benchmarks show that ESMTrack achieves competitive state-of-the-art performance, strong cross-dataset generalization, and real-time inference speed. The source code is available at https://github.com/LiShenglana/ESMTrack.

0.43

Fed-MAPTrack: Federated Modality-aware Prompt Tuning for RGB-X Tracking

cs.CV ·2026-10-26 ·Xiangyu Liu, Yijie Shen, Yue Yin, Zhitong Yin, Yongqi Pan +1 more
similarity 0.60
Abstract

RGB-X tracking complements RGB appearance with thermal, depth, or event observations, but centralized training requires collecting multimodal videos at a single location. Federated training keeps raw videos local, but sensor heterogeneity can create a mismatch between parameter-sharing domains and the clients contributing to them. This mismatch is particularly relevant when RGB-only clients coexist with sensor-equipped clients: their RGB observations remain useful, but they provide no auxiliary measurements for learning sensor-dependent interactions. We propose Fed-MAPTrack, a modality-aware federated prompt tuning framework for RGB-X tracking. The pretrained tracking backbone and prediction head are frozen, and clients optimize and exchange only prompt-related parameters. The server aggregates RGB-shared parameters globally and maintains separate thermal, event, and depth banks for auxiliary-specific, fusion, and normalization parameters. Selective participation retains RGB-only clients' contributions to the global RGB bank while excluding their fusion and normalization updates from modality-specific aggregation. Across three matched training repetitions under a fixed client partition, Fed-MAPTrack improves the mean FedAvg scores by 2.35 AUC points on LasHeR, 3.45 SR points on VisEvent, and 2.11 F-score points on DepthTrack. Among the nine evaluated methods, it achieves the highest mean thermal AUC and depth F-score, while its mean event SR is 0.07 points below that of Independent FL. Controlled ablations show that extending the bucketing scope without a compatible participation rule can reduce performance. These results highlight the need to jointly define the sharing domain and eligible contributors for each parameter group.

0.26