CS Paper Radar

Draft: A Parametric Tool for Robot Design Exploration

David Nguyen, Marcelo Coelho, Sangbae Kim

cs.RO ·submitted 2026-09-29 19:00 UTC · v1
survey

Abstract

Robot performance is often limited by the cost of iterating on morphology and control together, since every computer-aided design (CAD) change has to be carried into a simulation-ready model before control work begins. Co-design methods attempt to close this gap, but each uses a model generator written for a single platform or lack the use of real-world data to suggest that designs are plausible. We present Draft, a parametric generation tool whose generalized engine compiles any parametric tree of serial chains into a simulation-ready MJCF model, without CAD. It allows engineers to explore design tradeoffs through easily adjustable models and evaluate how changes influence controller performance. Draft grounds the free parameters of each design using trends fitted to a survey of $114$ actuators and $49$ published robot descriptions, so that a generated robot is anchored to real-world hardware. We validate those trends wholistically by building twins of four off-the-shelf robots, whose masses agree to $1.10\times$ geometric mean fold error. Finally, we demonstrate how Draft exposes design tradeoffs by evaluating three quadrupeds through a two-stage reinforcement learning curriculum.

Closest papers

Nearest neighbours by meaning across the whole index.

LACE-CRAFT: Robot Co-Design with Actor Inheritance and Blackboard Collaboration

cs.RO ·2026-10-07 ·Yuhan Wen, Jiawei Wang, Qixuan Zhang, Calvin Zhang, Yusen Qin +1 more
similarity 0.67
Abstract · 16 pages including appendix. Corrected source files to match the author list; scientific content unchanged. Project website: https://deemost…

Robot co-design couples morphology search with policy learning, yet training every new design from scratch discards acquired control experience. We present LACE-CRAFT, which compares continued learning on the current robot with policy adaptation to new morphology-reward pairs. LACE resumes the incumbent's full learning state and initializes compatible challengers with its actor parameters and observation statistics. A fixed task metric selects among both branches and the frozen incumbent. CRAFT coordinates Feedback, Morphology, Reward, and Integration roles through shared experimental records and behavioral replays to generate and cross-review paired proposals. A generative extension converts generated meshes into editable articulated models with configured joints, actuator interfaces, and consistently updated simulation assets. Across five locomotion benchmarks, mean scores over three evaluation seeds are 6.4-91.9% higher than D2C. Both methods train 30 new morphology-reward pairs over five rounds; LACE additionally uses four continuation training units. Five-task ablations examine policy inheritance and replay-derived feedback. A fabricated prototype demonstrates indoor walking and illustrates the geometry-to-hardware workflow.

0.33

Bridging Language and Physics: Automated Design of Continuum Robots with Large Language Models

cs.RO ·2026-09-08 ·Jingyi Chen, Mohan Zhang, Laura Yao, Yingtai Ni, Jianmin Ji +3 more
publishedbenchmarkcode/data similarity 0.65
Abstract · The first three authors contributed equally to this work

Large language models (LLMs) have recently emerged as a promising tool for automating robot design from high-level specifications, yet they remain ineffective for robots operating under complex physical interactions. This limitation stems from the gap between language-based reasoning and the physical consequences of embodiment, often resulting in designs with low physical validity. In this work, we propose a multi-layered framework, AID-SR, that establishes a closed loop by translating simulator-observed physical states into structured feedback for the LLM designer. Combined with semantic critique, human feedback, and iterative refinement, the framework promotes the generation of physically feasible and functionally meaningful robot designs. We evaluate our approach on tendon-driven continuum robots across a benchmark of 14 tasks spanning reaching, grasping, locomotion, and manipulation. The proposed framework achieves 96.2% rate for passing the simulation feasibility check and by applying a common reinforcement learning training, 26.7% robots can successfully fulfill the corresponding task. We then fabricate three designed robots of AID-SR that successfully complete the task in real-world. These extensive experiments across simulation and real-world environments demonstrate and break the wall of utilizing the LLMs for automated design of continuum robots. The source code and experimental resources are publicly available at https://github.com/UNITES-Lab/AID-SR.

0.70

Robot Tool Design from Scratch via Behavior-Aware Hierarchical Optimization

cs.RO ·2026-09-28 ·Yinghan Chen, Xiyao Tian, Yizan Dai, Yuyang Li, Yixin Zhu
similarity 0.65
Abstract

The ability to design a tool for a task marks a level of intelligence beyond merely understanding, selecting, or using one. Existing methods for robotic tool design typically optimize a tool's continuous shape and action within a structure that is prescribed or generated beforehand, so the structure itself stays outside the physical optimization loop. We study task-driven tool design from scratch, where tool structure, shape, and action are all derived from the desired physical outcome. Here we show that the three elements can be designed jointly by HOT, a hierarchical optimization whose upper level searches over discrete tool structures with BASS, while lower-level physical optimization evaluates their task behavior and returns milestone progress as behavioral evidence for the search, ultimately providing jointly optimized shape and action. On four tool-use tasks with distinct physical functions, HOT discovers functional structures after evaluating only a small fraction of search spaces containing up to 56 million structures, and the subsequent refinement of their geometry lowers the task loss on all tasks while preserving success, through deformations that are functionally interpretable. Once 3D printed, the tools accomplish all tasks on a real robot with the actions found in simulation. Designing tools from required physical effects, rather than a catalog of known tools, is a step toward the open-ended tool making seen in humans and animals.

0.23

Agentic Robot Creation through Generation, Verification, and Revision

cs.RO ·2026-10-13 ·Xuebing Li, Yibo He, Sitong Liu, Ran Ji, Jiayuan Gu
code/data similarity 0.65
Abstract · Project page: https://roboforge-project.github.io/

Can an AI agent turn high-level user intent into a functioning robot and teach it how to behave? We study this question from two complementary aspects: embodiment and behavior creation. For embodiment creation, we investigate how well current multimodal models capture mechanical requirements, and introduce computational metrics for evaluating generated designs before fabrication. For behavior creation, we present Roboforge, an agentic framework that turns task specifications into executable policies through motion generation, policy learning, and execution-grounded revision. Given a robot embodiment and task, the agent generates a reference motion, configures the learning objective, and trains a policy. Crucially, motion remains in the loop: rollout feedback can revise the reference motion, reward, or both. We evaluate a generated embodiment across multiple MLLMs and behavior creation across four diverse robots against reward-refinement and one-shot motion baselines. Our computational metrics expose recurring mechanical failures in generated designs, while behavior experiments show that execution-grounded refinement improves task-level behavior and execution quality. Finally, we fabricate an agent-generated Gorilla and directly deploy learned behaviors on the physical robot.

0.49

RoboARCade: Benchmarking Agentic Robot Control

cs.RO ·2026-11-05 ·Satvik Sharma, Hengyuan Hu, Mihika Kamat, Dorsa Sadigh, Jeannette Bohg
benchmarkcode/data similarity 0.65
Abstract

Improvements in multi-modal capabilities have enabled agents to act directly as robot policies, a setting we refer to as agentic robot control (ARC). We introduce RoboARCade, a benchmark of long-horizon manipulation tasks across three embodiments designed to test in-context adaptation, memory, and reasoning for precise control. The tasks build on existing open-source benchmarks, which we make harder by widening the range of initial conditions. RoboARCade is easy to use and extend: all tasks run on a single simulation backend, MuJoCo, each task is a self-contained data pack, and agents connect through interchangeable interfaces, so new tasks, agents, and interfaces can be added independently. The benchmark separates leading agents: GPT-6 Astra achieves 49.8% compared with 43.6% for Claude Fable 5.1, leaving substantial room for improvement. Comparing two interfaces, we find that a richer visual interface adds only 1.5 to 6.8 points at 1.7 to 2.3 times the cost. Failures stem mostly from choosing a poor manipulation strategy or executing a good one imprecisely, rarely from misunderstanding the scene, and agents incorrectly claim success on 24% to 39% of attempted subtasks. Agents can also improve without human input: one successful demonstration in context raises Astra's score from 53.5% to 73.0% on a five-task subset, and a prompt the agent writes and revises itself reaches 72.0%. Code, videos and full traces are available at roboarcade.org.

0.17

Large Language Models for Model-Based Robot Design

cs.RO ·2026-09-27 ·Andrew Wilhelm, Angelina Zhou, Nils Napp
similarity 0.65
Abstract · 9 pages, 4 figures

Large Language Models (LLMs) can contribute useful engineering knowledge to robot design, but directly generated designs may rely on implicit assumptions and provide no guarantees of feasibility or optimality. These assumptions are critical because different reasonable modeling choices can materially change which designs are predicted to be feasible or optimal. We therefore present a framework that uses LLMs to construct explicit engineering models containing physical relationships, compatibility constraints, and objectives, allowing these modeling choices to be inspected and revised before formal optimization. The model can then be updated with additional engineering, manufacturer, or system-specific information before formal multi-objective optimization provides feasibility and Pareto-optimality guarantees with respect to the finalized model and specified design space. We evaluate the framework on quadcopter and line-following robot component-selection problems. Across 30 direct LLM design trials, none could be verified as feasible under the corresponding finalized model. Comparisons with an independently developed expert model and successive stages of model refinement further showed that changes in modeling assumptions substantially altered the predicted feasible and Pareto-optimal design sets. Together, these results show that using LLMs to construct explicit engineering models makes the underlying design choices available for inspection and revision before those assumptions determine the optimized designs. Explicit modeling therefore provides an interface for combining LLM-generated engineering knowledge, system-specific information, and formal design optimization.

0.29

LEMCA: LLM-Guided Synthesis of Efficient Mode-Switching Control Architectures

cs.RO ·2026-09-18 ·Arjun Krishna, Vincent Pacelli, Dinesh Jayaraman
similarity 0.64
Abstract · CoRL 2026. Project website: https://lemca-robotics.github.io/

Physical control tasks in the natural world, such as driving or object manipulation, frequently exhibit dramatic variations in sensory and compute complexity over time. Correspondingly, a natural resource-efficient choice for robot control is to dynamically switch between control modes with varying resource allocations. However, such "mode-switching controllers" (MSCs) have historically required laborious, expert-driven design and synthesis for each new task. Driven by these design difficulties, modern robotic control architectures often fall back to a wasteful "monolithic" one-size-fits-all structure, where resource allocation is permanently anchored to the hardest, most resource-intensive task phases. To facilitate the design of performant yet efficient MSCs, we propose LLM-Guided synthesis of Efficient Mode-Switching Control Architectures (LEMCA). LEMCA represents MSC designs as interpretable programs to be iteratively refined in an evolutionary loop. To evaluate design fitness, we propose MSC-compatible extensions of automated controller synthesis approaches, such as reinforcement learning in simulation. LEMCA then leverages the semantic priors, reasoning, and coding capabilities of Large Language Models (LLMs) to iteratively edit controller modes, their corresponding sensory-compute resource allocations, and mode transitions. Our experiments across diverse control benchmarks show that LEMCA consistently discovers strategies that surpass the Pareto frontier of monolithic designs by reclaiming wasted resources during "easy" task phases. LEMCA thus presents an automated, low-effort path to synthesize resource-efficient MSC designs.

0.36

LIBERO-Industry: Benchmarking Robotic Manipulation under Industrial Process Constraints

cs.AI ·2026-10-12 ·Ming Shin Cindy Sung, Duan Leijiahao, Haoxiang Wang, Boning Tan, Liangna Fu +7 more
benchmark similarity 0.64
Abstract · 38 pages, 14 figures, 20 tables, including appendices. Project website: https://IAIE-PhysicalAI.github.io/LIBERO-Industry/

Industrial manipulation in flexible manufacturing, e.g., high-mix, low-volume (HMLV) electronics assembly, requires robot policies to adapt to changing products and production conditions. Such settings impose industrial process constraints, including product variants, moving material flows, finite execution windows, and tight geometric tolerances. However, existing evaluation frameworks do not systematically capture these constraints when assessing generalist robot policies. To address this gap, we introduce LIBERO-Industry, a novel benchmark built on the widely used robot learning benchmark LIBERO, that translates the aforementioned industrial constraints into controllable task conditions and measurable success criteria. Specifically, LIBERO-Industry comprises three classic task scenarios: Static-to-Dynamic (S2D) loading, Dynamic-to-Static (D2S) unloading, and Dynamic-to-Dynamic (D2D) transfer. The suites contain 216 tasks in total that systematically vary object geometry, conveyor speed, interaction-window duration, and geometric acceptance region size. Extensive experiments across five generalist robot policies (including vision-language-action models and world-action models) show that performance progressively degrades as industrial constraints are introduced and combined. Under a shared fine-tuning and evaluation protocol, the LIBERO-Industry co-training condition achieved higher observed target-transfer completion than the original-LIBERO condition.

0.35