CS Paper Radar

Large Language Models for Model-Based Robot Design

Andrew Wilhelm, Angelina Zhou, Nils Napp

cs.RO ·submitted 2026-09-27 10:11 UTC · v3

Abstract

Large Language Models (LLMs) can contribute useful engineering knowledge to robot design, but directly generated designs may rely on implicit assumptions and provide no guarantees of feasibility or optimality. These assumptions are critical because different reasonable modeling choices can materially change which designs are predicted to be feasible or optimal. We therefore present a framework that uses LLMs to construct explicit engineering models containing physical relationships, compatibility constraints, and objectives, allowing these modeling choices to be inspected and revised before formal optimization. The model can then be updated with additional engineering, manufacturer, or system-specific information before formal multi-objective optimization provides feasibility and Pareto-optimality guarantees with respect to the finalized model and specified design space. We evaluate the framework on quadcopter and line-following robot component-selection problems. Across 30 direct LLM design trials, none could be verified as feasible under the corresponding finalized model. Comparisons with an independently developed expert model and successive stages of model refinement further showed that changes in modeling assumptions substantially altered the predicted feasible and Pareto-optimal design sets. Together, these results show that using LLMs to construct explicit engineering models makes the underlying design choices available for inspection and revision before those assumptions determine the optimized designs. Explicit modeling therefore provides an interface for combining LLM-generated engineering knowledge, system-specific information, and formal design optimization.

Comment
9 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Draft: A Parametric Tool for Robot Design Exploration

cs.RO ·2026-09-29 ·David Nguyen, Marcelo Coelho, Sangbae Kim
survey similarity 0.65
Abstract

Robot performance is often limited by the cost of iterating on morphology and control together, since every computer-aided design (CAD) change has to be carried into a simulation-ready model before control work begins. Co-design methods attempt to close this gap, but each uses a model generator written for a single platform or lack the use of real-world data to suggest that designs are plausible. We present Draft, a parametric generation tool whose generalized engine compiles any parametric tree of serial chains into a simulation-ready MJCF model, without CAD. It allows engineers to explore design tradeoffs through easily adjustable models and evaluate how changes influence controller performance. Draft grounds the free parameters of each design using trends fitted to a survey of $114$ actuators and $49$ published robot descriptions, so that a generated robot is anchored to real-world hardware. We validate those trends wholistically by building twins of four off-the-shelf robots, whose masses agree to $1.10\times$ geometric mean fold error. Finally, we demonstrate how Draft exposes design tradeoffs by evaluating three quadrupeds through a two-stage reinforcement learning curriculum.

0.24

Task-Oriented Co-Design and Optimization of Geared Actuators for Robotic Applications

cs.RO ·2026-09-19 ·Xuanyu Huang, Jianqiang Dong, Hang Zhao
hot direction similarity 0.61
Abstract

Different tasks performed by legged robots impose distinct torque and speed requirements on actuators. Existing robotic actuators are generally optimized at the component level for metrics such as torque or power density, without explicit task guidance. System-level optimization across components such as motors, gearboxes, and sensors is challenging because of the high computational cost and coupling among mechanical, electrical, and electromagnetic behaviors. Consequently, improvements in individual components may not translate into better robot performance in a specific task. To this end, we present a systematic optimization framework for task-oriented co-design of actuator hardware and control. First, surrogate models are employed to accelerate motor evaluation and support global exploration of the coupled design space. Then, a hierarchical mixed-variable optimization strategy is adopted, combining discrete enumeration with continuous search over dimensions and real-valued indices. These indices are rounded to select admissible values for the remaining discrete choices before each evaluation. Within this search, rated output torque density and task performance are jointly optimized, with Bezier-parameterized joint torque profiles determined for each hardware candidate. Finally, the effectiveness of the proposed framework is validated through actuator fabrication and experiments on a two-degree-of-freedom jumping leg. Based on its measured mass, the fabricated prototype achieves a nominal rated output torque density of 35.7 N m/kg, approximately 60% higher than that of a widely used commercial geared joint actuator, while being 18.6% lighter. Under matched bench conditions, it achieves 12.0% greater jump height at twice-rated torque. Together, these results demonstrate a systematic route from task requirements to actuator design and control.

0.36

LIBERO-Industry: Benchmarking Robotic Manipulation under Industrial Process Constraints

cs.AI ·2026-10-12 ·Ming Shin Cindy Sung, Duan Leijiahao, Haoxiang Wang, Boning Tan, Liangna Fu +7 more
benchmark similarity 0.59
Abstract · 38 pages, 14 figures, 20 tables, including appendices. Project website: https://IAIE-PhysicalAI.github.io/LIBERO-Industry/

Industrial manipulation in flexible manufacturing, e.g., high-mix, low-volume (HMLV) electronics assembly, requires robot policies to adapt to changing products and production conditions. Such settings impose industrial process constraints, including product variants, moving material flows, finite execution windows, and tight geometric tolerances. However, existing evaluation frameworks do not systematically capture these constraints when assessing generalist robot policies. To address this gap, we introduce LIBERO-Industry, a novel benchmark built on the widely used robot learning benchmark LIBERO, that translates the aforementioned industrial constraints into controllable task conditions and measurable success criteria. Specifically, LIBERO-Industry comprises three classic task scenarios: Static-to-Dynamic (S2D) loading, Dynamic-to-Static (D2S) unloading, and Dynamic-to-Dynamic (D2D) transfer. The suites contain 216 tasks in total that systematically vary object geometry, conveyor speed, interaction-window duration, and geometric acceptance region size. Extensive experiments across five generalist robot policies (including vision-language-action models and world-action models) show that performance progressively degrades as industrial constraints are introduced and combined. Under a shared fine-tuning and evaluation protocol, the LIBERO-Industry co-training condition achieved higher observed target-transfer completion than the original-LIBERO condition.

0.35

Panini- Feasible Grammar For Robot Designs

cs.RO cs.AI ·2026-11-17 ·Mayukh Debnath, Manan Roy Choudhury
similarity 0.59
Abstract

Symbolic methods make robot designs interpretable but often overlook continuous geometry; learned methods handle geometry but offer less transparent structure. We introduce a typed production grammar that uses case-role relations, parameter inheritance, and specificity-based rule arbitration to generate both manipulation skills and robot morphologies. A geometric realization map translates grammar composition into transformations in SE(3), behaving as a monoid homomorphism when inheritance is inactive and exhibiting a measurable defect when inheritance is enabled. The grammar provides a compact representation, and its arbitration decisions can be recovered from geometric containment (agreement 0.905 +/- 0.062 across 10 seeds, versus 0.611 +/- 0.090 for a Euclidean control). We also introduce PANINI, a cross-entropy search method over grammar-based morphology representations. Across 30 methods and 24 seeds, PANINI achieves the best mean rank but is not statistically distinguishable from strong generic optimizers. Its main demonstrated advantage is therefore structural rather than optimization performance: grammar-generated designs are legal by construction, and coordinated limb placement produces 95% jointly feasible edits, compared with 55% for range-constrained resampling and none for flat parameterization in 6,000 draws. These results show how typed grammars can make robot generation more interpretable and geometrically coordinated, without implying that every feasible design will locomote or that grammar-based search universally outperforms generic optimizers.

0.35

Verifier-Mediated Multi-LLM Coordination for Multi-Robot Path Planning

cs.RO eess.SY ·2026-10-08 ·Vivek Khatana, Zijian Song, Naira Hovakimyan, Petros Voulgaris
similarity 0.57
Abstract · 5 pages, 4 figures

Foundation models are increasingly used for high-level multi-robot task planning, yet independently generated symbolic plans can become jointly infeasible after geometric grounding because of shared spatial and temporal constraints. We study execution-aware coordination of large-language-model (LLM) planners for multi-robot navigation. We compare a centralized architecture, in which one LLM jointly reasons over the robot team, with a decentralized multi-LLM architecture in which each robot independently proposes a task plan. A geometric verifier grounds the candidate plans into robot trajectories, detects predicted inter-robot conflicts, and converts conflict information into structured feedback for targeted replanning. This verifier-mediated architecture separates semantic task reasoning from execution-level feasibility while enabling iterative coordination among LLM planners. Experiments in CARLA and on Crazyflie aerial robots evaluate coordination performance as task complexity increases and characterize the trade-offs between centralized reasoning, decentralized verifier-mediated coordination, and physical executability.

0.48

AI agents can redesign engineering parts with more than a thousand CAD parameters and nonlinear simulations

cs.AI ·2026-11-19 ·Alexandra Starostina, Alexander Hermann, Mahish Guru, Kartik Bali, Roland Aydin +1 more
similarity 0.57
Abstract

Simulation-driven design of real engineering components has to meet three conditions at once. It runs on few solves, since a nonlinear finite-element simulation of a 3D part takes hours; its design space has many values, the hundreds to thousands of values of the part's CAD model; and a better design often needs a redesign, coordinated changes of the part's proportions rather than local polishing of its surface. Automated optimisers meet at most two of these conditions. Classical optimisers, Bayesian or derivative-free, need a person to cut the design down to a few parameters, and on all the values they need far more solves; industrial shape optimisers move every surface node of the mesh in one solve per cycle, but only in small steps that polish rather than redesign. We ask whether a general-purpose large language model (LLM) can meet all three by joining what it knows with what the simulation shows. GPT-6 Astra edits a magnesium stent through a CAD geometry parametrisation of about 1,650 values, with a budget of 15 simulations; every proposal is built in CAD, meshed and simulated with large-deformation plasticity and contact, and the LLM reads the full results of every solve. Within that budget it lowered the objective, a high percentile of the strains in the stent's bends, by 32%; on the same budget, the industrial shape optimiser Tosca improved the original design by a tenth and then stopped improving. An earlier GPT-6 Astra design, 25% lower in the same objective, was checked in an independent, higher-fidelity model of the full deployment with crimping and damage: it was 14% less strained than the original after the full chain, and its most damaged spot began to fail later and carried 63% less damage at full expansion. LLMs can thus join their learned knowledge with simulation data to adjust more than a thousand design values and reach valid designs with real improvements.

0.26

Bridging Language and Physics: Automated Design of Continuum Robots with Large Language Models

cs.RO ·2026-09-08 ·Jingyi Chen, Mohan Zhang, Laura Yao, Yingtai Ni, Jianmin Ji +3 more
publishedbenchmarkcode/data similarity 0.57
Abstract · The first three authors contributed equally to this work

Large language models (LLMs) have recently emerged as a promising tool for automating robot design from high-level specifications, yet they remain ineffective for robots operating under complex physical interactions. This limitation stems from the gap between language-based reasoning and the physical consequences of embodiment, often resulting in designs with low physical validity. In this work, we propose a multi-layered framework, AID-SR, that establishes a closed loop by translating simulator-observed physical states into structured feedback for the LLM designer. Combined with semantic critique, human feedback, and iterative refinement, the framework promotes the generation of physically feasible and functionally meaningful robot designs. We evaluate our approach on tendon-driven continuum robots across a benchmark of 14 tasks spanning reaching, grasping, locomotion, and manipulation. The proposed framework achieves 96.2% rate for passing the simulation feasibility check and by applying a common reinforcement learning training, 26.7% robots can successfully fulfill the corresponding task. We then fabricate three designed robots of AID-SR that successfully complete the task in real-world. These extensive experiments across simulation and real-world environments demonstrate and break the wall of utilizing the LLMs for automated design of continuum robots. The source code and experimental resources are publicly available at https://github.com/UNITES-Lab/AID-SR.

0.70

Learning Purposeful Co-designs of Bio-inspired Quadrupedal Robots

cs.RO ·2026-11-02 ·Fabio Boekel, Jiatao Ding, Cosimo Della Santina
similarity 0.57
Abstract · 10 pages, 7 figures, 6 tables

Treating morphology and control as separate design problems has constrained the efficiency and adaptability of quadrupedal robots, while current co-design approaches are often constrained by restricted design spaces. We overcome this limit by introducing Dogger, a bio-inspired quadruped with modular three-segment legs, four-bar linkages and adjustable passive knee compliance. A two-stage framework combining reinforcement learning and Bayesian optimization is developed: the morphology-conditioned control policy is trained across designs and then held fixed during task-specific design selection. The resulting designs and policies deployed zero-shot reduce the cost of transport by 18.6% and 35.7% for inspection and payload-carrying tasks. Comparisons demonstrate that full geometry-compliance co-design outperforms fixed and restricted design scopes. Cross-task tests further reveal distinct task-specific morphologies with shared mechanical trade-offs. These results provide hardware-level evidence that expanding the physical design space alongside learned control is essential to realize the full potential of task-driven morphology-control co-design in legged robotics.

0.12